Process Engineer - Isomerization

Process Engineer

Sr. Enterprise Software Engineer

Process Engineer- Hydrogen/Hydrotreating

Process Engineer - NGL Fractionation

Process Engineer Talent Mapping

Senior Certification Engineer (HOA)

Process Engineer - CDU/VDU

Process Engineer - Crude Distillation

Contract Engineer

Role Description: <ul><li>We occupy a unique position in the global energy industry.</li><li>We are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.&nbsp;</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Review and monitor the performances of existing Isomerization manufacturing facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, and process safety. Issue quarterly Isomerization performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having Isomerization process technologies.&nbsp;</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Isomerization plants which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design improvements.</li><li>Issue service reports for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Chemical Engineering or related specialization.</li><li>An advanced degree is preferred.</li><li>You should have a minimum of 15 years of total refinery or petrochemical process units experience (process engineering and operations) with at least 10 years’ experience in handling Isomerization plants.</li><li>Exposure to different Isomerization process licensor technologies is a plus.</li></ul>

Responsibilities: <ul><li>Support the development of small to medium-sized capital projects/programs (€1M – €15M) that include the integration of outside technical resources.</li><li>Provide solutions to a wide range of difficult to complex problems using in-depth knowledge of specific manufacturing operations combined with the application of appropriate engineering principles.</li><li>Assist the site team to determine general approaches and specific solutions to technical problems.</li><li>Provide technical support or leadership to teams conceiving, developing, and implementing major technology upgrades or product improvement/line extensions.&nbsp;</li><li>Routinely participates inter-organization teams working on product improvement and line extensions.</li><li>Anticipate changing resource requirements and results, and initiate appropriate responses in a way that optimizes overall project results.</li><li>Make effective presentations of technical material to non-technical people, both written and verbal.</li><li>Able to follow and champion the Capital Project Management process.&nbsp;</li><li>Capable of following a disciplined process approach utilizing the One-Right-Way process to ensure vertical systems startups..</li><li>Manage project scope, schedule, finances and resources to meet predetermined business objectives</li><li>Work independently to coordinate own and others activities while networking with key contacts outside of discipline.&nbsp;</li><li>Manage project team members both internal to and external engineering resources.</li><li>Work through very complex issues using in-depth analysis and can evaluate tangible and intangible variables.&nbsp;</li><li>Have individual and shared responsibility for the safety of all personnel and the safe operation of the departments, equipment, and buildings under their authority.</li><li>Review and analyze proposed new processes for safety hazards.&nbsp;&nbsp;</li><li>Participate in the Management of Change (MOC), HAZOP, and HACCP processes.</li><li>Other duties as determined by business needs</li></ul> Requirements: <ul><li>Experienced in working in multi-disciplinary project teams in a multi-cultural setting</li><li>Awareness of the cost aspects within CAPEX projects</li><li>Very good interpersonal skills, good analytical and problem-solving capabilities, team player and strong communicator</li><li>Able to build and lead effective work teams for midsize to large projects.</li><li>Demonstrate good judgment in making commitments and risk-taking.</li><li>Willingness to work for a period of months abroad (i.e. Thailand/China/US/Brazil)</li><li>50% to 60% travel required at times</li></ul>

Job Description:This role is for an experienced Senior developer/Lead with extensive hands- on experience in technology, web systems that are cloud hosted with a passion for new technology and working in a dynamic team setup.&nbsp;You should have the following technical skillset:&nbsp;<ul><li>Extensive knowledge and experience in Object Oriented design, functional programming, development and operations support&nbsp;</li><li>Extensive knowledge in Java 11 and above, Spring Boot 2, Spring IOC, Spring AOP, Spring security, Rest Web services, Spring JPA(Hibernate) and RDBMS Extensive knowledge in Application and Database designing using known Design patterns to have highest performing, secure, usable, and scalable application.&nbsp;</li><li>Ability to own the solution and provide architectural guidance to team and will be able to evaluate new technologies and come up with technical improvements.&nbsp;</li><li>You have extensive business understanding and should be able to communicate and provide solutions to business pain points and necessities.&nbsp;</li><li>Will be responsible for acting as a POC for application and its related initiatives and be able to conduct code reviews and set protocols and standards for code review.&nbsp;</li><li>You will also have experience in Security Thread modelling and in Cloud solutions (AWS, Azure) like Kubernetes.&nbsp;</li><li>Experience in business continuity and disaster management and in Data migration, as well as a good understanding of CI/CD pipelines&nbsp;</li><li>Minimum of 5 years experience required&nbsp;</li><li>Required: BS Computer Engineering, or related&nbsp;</li></ul> What you will be involved with in terms of design and development:&nbsp;<ul><li>Explain the design approach clearly&nbsp;</li><li>Know the overall SDLC of any project. Experience using one or more of Agile, Lean, and DevOps practices&nbsp;</li><li>Ability to create and review Technical Design Documents&nbsp;&nbsp;</li><li>Understanding the importance of security design/testing etc.&nbsp;</li><li>Knowledge of security scanning tools like Coverity, Blackduck, Twistlock&nbsp;</li><li>Take ownership of deliverables&nbsp;</li><li>Lead and own individual and delivery by a team of people&nbsp;</li></ul> &nbsp;As a specialist in Java&nbsp;<ul><li>Develop the code for large web systems with integration preferably with more than two/three systems&nbsp;</li><li>Passion for technology trends e.g. Cloud, Digital, and collaboration tools&nbsp;</li><li>Code all aspects of Java and can speak fluently about all aspects of Java&nbsp;</li></ul>&nbsp;

Role Description: <ul><li>We occupy a unique position in the global energy industry.</li><li>We are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.</li></ul> Responsibilities: <ul><li>Perform in-depth plant monitoring and optimize performance of Hydrogen/Hydrotreating units by overseen unit’s operation and economics losses.</li><li>Issue detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Perform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.</li><li>Lead process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.</li><li>Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>Also, develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 15 years total refinery process units experience (process engineering and operations) with at least 10 years’ experience in handling Hydrogen/Hydrotreating units.</li><li>Exposure to different licensor technologies for Hydrogen/Hydrotreating is essential.</li><li>Certified PHA/HAZOP leader.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units</li></ul>

Role Description: <ul><li>We occupy a unique position in the global energy industry.</li><li>We are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Perform in-depth plant monitoring and optimize the performance of assigned units by overseen unit’s operation and economics losses.&nbsp;</li><li>Issuing detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.&nbsp;</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Perform specific tasks such as, but not limited to catalyst/ desiccant forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.&nbsp;</li><li>Assigned the Lead Role in process safety management overseeing HAZOP, PSR, SIL, PSSR, RA, and Alarm Rationalization.</li><li>Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Propose and manage major projects to improve safety, reliability and profitability.</li><li>Prepare design request, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>Develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.&nbsp;</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 15 years of total NGL/LPG process units experience (process engineering and operations) with at least 10 years’ experience in handling gas processing and NGL Fractionation.</li><li>Exposure to different licensor technologies for gas processing and NGL Fractionation is a plus.</li><li>You should be a certified PHA/HAZOP leader.</li></ul>

In Hungary Flex operates in 7 cities – Budapest, Gyál, Üllő, Nyíregyháza, Sárvár, Tab, Zalaegerszeg – with&nbsp;around 10 000 employees. Responsibilities: Process Engineer:Main tasks will be the following:<ul><li>Understanding manufacturing process and product</li><li>bility of define manufacturing process</li><li>Understanding manufacturing technologies, techniques, processes</li><li>Capability to find root causes of various failures in manufacturing processes</li><li>High level of participation in daily production activities, effective problem solving on daily issues</li><li>Focused on continuosily develop / maintaining production yields with the teams according to comany goals</li><li>Supporting introduction of ECO’s and raising ECO’s</li><li>Effectively using structured problemsolving techniques and methods</li><li>Develop, implements, ownership on process control methodologies</li><li>Write and update work instructions, other documents (for example specifications, procedures)</li><li>Substitute colleagues in competency</li><li>Support new project launches, participation in production control</li><li>Prepare technical specification for Machine/jigs that Non Serial purchasing able to use to select proper supplier based on NS Procurement internal rules and initiate</li></ul> Requirements: <ul><li>Support new projects introduction and realize the necessary documentation fits to Automotive requirement (Process Flow, FlexFlow setup Layout, Process Validation, Proto&nbsp;</li><li>Build Report). Based on RandR production create Capacity Analysis and realize the&nbsp;</li><li>needed development, changes in order to achive the reqired capacity.</li><li>Good communication skills – meetings, conference calls, escallation</li><li>Necessary qualification and/or equivalent experience for the position:</li><li>University degree in engineering (mechanical, mechatronic or electrical field)</li><li>Good communicational skills</li><li>Computer literacy</li></ul>

Role description: <ul><li>Our airworthiness team plays a key role in bringing our vision to life.</li><li>It also represents a key intermediary interface between and the relevant aviation authorities who are responsible for the safety and certification of the products.</li><li>As well as helping to shape the regulatory environment according to which our products will be certified, your task will also be to support our in-house design teams.</li><li>By this you will contribute that our aircraft will meet the applicable certification standards and regulatory requirements.</li></ul> Responsibilities: <ul><li>Understanding and interpretation of Part 21 Sub. G and J.</li><li>Understanding and interpretation of the applicable CS and environmental protection requirements.</li><li>Understanding and uncompromised adherence to Design Organization procedures.</li><li>Assisting to quality assurance personnel in ensuring the Design Organization Handbook is up to date.</li><li>Supporting all departments of the design organisation in all questions regarding airworthiness, environmental protection approvals and certification.</li><li>Preparation of the Type Investigation program and co-ordination of all tasks related to Type Investigation in concurrence with EASA.</li><li>Co-operation in issuing guidelines for the preparation of the manuals required by the applicable implementing rules, Service Bulletins, drawings, specifications, and standards&nbsp;</li><li>Coordination with compliance verification engineers for satisfactory completion and showing of compliance against target certification specifications.</li><li>Co-operation in preparing test programs needed for demonstration of compliance.&nbsp;</li><li>Signing of conformity statements for test articles and components before performing laboratory, ground, or flight tests.&nbsp;</li><li>Approving the classification of changes in accordance with DOA privileges.&nbsp;</li><li>Monitoring of significant events on other aeronautical products as far as relevant to determine their effect on airworthiness of products being designed by the design organisation&nbsp;</li><li>Synchronising with EASA with regard to the issue of airworthiness directives in general based on Service Bulletins&nbsp;</li><li>Active involvement in internal DOA relevant training activities.</li></ul> Requirements: What do we expect from the candidate? <ul><li>Master’s degree in aerospace or aeronautical engineering or STEM + 10 years’ experience in aviation.</li><li>Knowledge of the EASA regulatory environment and EASA practices.</li><li>Previous involvement in EASA Type Certification Processes.</li><li>Knowledge of airworthiness code on national level (German LTF-UL, UK-BCAR) is beneficial.</li><li>Experience as Airworthiness Engineer and with Aviation safety (SMS).</li><li>Pragmatic and open-minded approach to novel technology design solutions.</li><li>Organizational and time management skills.</li><li>Technical problem-solving skills.&nbsp;</li><li>High level of communication skills.</li><li>Safety oriented mindset.</li><li>English language proficiency (at least C1).</li><li>German language proficiency is beneficial.</li></ul> What do we offer? <ul><li>Long-term involvement in the company.</li><li>Flexible working time.</li><li>Dynamic and interesting teamwork in a young team.</li><li>Work in a creative and ambitious international company.</li><li>Access to unique knowledge, information in the field of aviation, department, and professional training resources.</li><li>Opportunities for personal and professional development.</li></ul>

Responsibilities: <ul><li>Assess operations of atmospheric crude distillation units (CDU) and vacuum distillation units (VDU) existing facilities to optimize operation by developing/set key performance indicators (KPIs) that will represent performances in different aspects such as profitability, operability, energy efficiency, reliability, process safety, etc.</li><li>Perform process parameters gap analysis and benchmarking among Global Manufacturing facilities (wholly-owned and affiliates) having CDU and VDU process technologies to capture and effectively share best practices, lesson learned, areas for improvements, and technical recommendations.&nbsp;</li><li>Perform benchmarking and best practices technical exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having CDU and VDU process technologies.&nbsp;</li><li>Execution and deliverables of the workshops will be based on Benchmarking &amp; Best Practices Exchange Agreement among Global Manufacturing facilities.&nbsp;</li><li>Issue bi-monthly CDU and VDU technical best practices bulletin for sharing within Global Manufacturing facilities.&nbsp;</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of CDU and VDU which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design.&nbsp;</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>Enhance the competitiveness of CDU and VDU asset base by capturing integration opportunities between process units and facilities.</li><li>Conduct internal assessments on CDU and VDU process engineering standards using engineering standard references.&nbsp;</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or central Engineering.&nbsp;</li><li>Support the implementation of relevant engineering standards to CDU and VDU across Global Manufacturing upon each facility management’s approval.&nbsp;</li><li>Participate on demand with Business Plan development and coordinate with stakeholders for possible capital investments on assigned process units and support techno-economic evaluations required by Global manufacturing portfolio.</li><li>Recommend and coordinate proven technology deployments in atmospheric crude distillation units (CDU) and vacuum distillation units (VDU).&nbsp;</li><li>Liaise with Engineering Services Department or Contracting Unit for any technology assessment and piloting support.</li><li>Collaborate with Joint venture companies, subsidiaries, and third-party companies to consolidate best practices related to the operation of CDU and VDU.&nbsp;</li><li>Coordinate implementation of suitable best practices to facilities.</li><li>Participate as subject matter experts on external benchmarking with 3rd party entities, which include but not limited to, Japan Cooperation Council Petroleum (JCCP), Gulf Downstream Association (GDA) and Committees.</li><li>Act as the Admin Area overall coordinator for cascading and driving Global Manufacturing and Corporate programs to the operating facilities for execution and effective monitoring.&nbsp;</li><li>represent the Global Manufacturing Admin Area in corporate committees and initiatives concerning his field of expertise.</li><li>Ensure continuous learning on CDU and VDU process engineering and technology specialist to ensure expertise is preserved through internal and external trainings.&nbsp;</li><li>Provide in-house technical trainings to Global Manufacturing facilities when needed in specific process topics related to the CDU and VDU operations.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>An advanced degree is preferred.</li><li>A minimum of 15 years’ experience in refinery operations, engineering and process design but at the very least 10 years direct experience in handling CDU and VDU process units.&nbsp;</li><li>Experience with more than one operating facility is strongly desirable.</li><li>You should be able to demonstrate a solid background developing and understanding the key performance indicators (KPI) involved in operating the process units concerned in terms of meeting the crude feed and product specifications, energy efficiency, asset management, economics, etc.&nbsp;</li><li>Knowledge of Solomon indices associated with operation of the process units concerned is an advantage.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units is required.</li><li>Experience in Turnaround, Start-up, Shutdowns, Management of change (MOC), HAZOP’s and performing technical assessments, investigations and case studies is an advantage.</li><li>Familiarity with basic computer software, and proficient user of HYSYS, PRO II simulation programs is essential.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Perform in-depth plant monitoring and optimize performance of CDU/VDU units whilst overseeing the unit’s operation and economics losses.</li><li>Issue detailed reports to recommend changes supported by simulation models’ result to optimize unit operation.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Perform specific tasks such as, but not limited to catalyst forecast/ evaluation, test runs, de-bottlenecking studies, due-diligence assessment, enhancement studies, HAZOP studies.</li><li>Lead process safety management overseeing HAZOP, PSR, SIL, PSSR, QRA, and Alarm Rationalization. Lead HAZOP/Process Safety Reviews of plant operations as well as new modifications.</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability.</li><li>Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>As well as develop detailed engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Review in-detail and revise standard work procedures like new operating procedures, instructions, RIMs, alarm and ESD check list, MOC, HAZOP, JSA, Relive valves, plant drawings.</li><li>Ensure environmental and safety awareness effectiveness with work closely with the facility Safety and Environment management to improve safety and achieve highest environmental standards.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Chemical Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You should have a minimum of 15 years total refinery process unit experience (process engineering and operations) with at least 10 years’ experience in handling Crude distillation units.</li><li>Exposure to different licensor technologies for Hydrocarbon treating is a plus.</li><li>Certified PHA/HAZOP leader.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.</li></ul>

Overview: <ul><li>We are seeking a Contract Engineer to join our Global Manufacturing Admin Area.</li><li>The GM is responsible for providing the technical consultations, operational support and troubleshooting, benchmarking, building strategies, business planning, and conducting assessment in the areas of safety and environmental compliance, cyber security, advance process control and optimizations, energy and electrical efficiency, process engineering, reliability and maintenance, operational excellence etc.&nbsp;</li><li>GMSD is also instrumental to the implementation of digital transformation program</li><li>Your primary role will be to develop and prepare contracts for Turnaround Maintenance</li><li>It involves preparing contract packages including Requests for Proposals (RFPs), Preliminary Cost Estimate, Evaluation Criteria in line with approved contracting strategy and procurement manual.</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Coordinate and work closely with Turnaround Engineer / Planning team to prepare Requests For Proposals (RFPs) for Turnaround services.</li><li>Coordinate and prepare contract terms and conditions for the requested services for approved turnaround scope.&nbsp;</li><li>Prepare / develop Evaluation Criteria and preliminary cost estimate.</li><li>Coordinate and work closely with Contract Advisor to manage all activities related to bidding process.</li><li>Route contracts for signature, track work progress and submit regular reports.</li><li>Participate in Pre-qualification requirement and development of approved bidders list to maximize competition.</li><li>Participate in Job-Explanation meeting &amp; site visits with intended bidders.</li><li>Provide &amp; coordinate for clarifications, questions &amp; answers during bidding process.</li><li>Participate in evaluating offers, bid review team member, reviewing pre-award packages in line with approved contracting strategy and procurement manual.</li><li>Participate &amp; Coordinate Kick Off Meeting with the awarded contractor, establish deliverables for the contractors to be ready to fulfil the contract requirement.&nbsp;</li><li>Assist in preparing, developing and measuring Key Performance Indicators for contracting.&nbsp;</li><li>Maintain computer records of contract information and update all involved parties and stakeholders with current status of contracts and expectations of completion.</li><li>Assess contractor’s performance during the execution of work to ensure that all contractual requirements are being met.</li><li>Verify and review Contractors’ Proposed Variation Orders and submit a Variation Order Status Report.&nbsp;</li><li>Provide technical advice and guidance on contracting processes and related issues to Turnaround Team.</li><li>Assist in formulating and improving contracting strategies for turnaround in order to optimize cost and reducing risks in line with procurement manual.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Engineering (Mechanical / Electrical / Industrial).</li><li>You should have a minimum 10 Years of Experience in Turnaround, out of which at least 6 years in contracting.</li></ul>

Skills

Industry

Location

Jobtitle

330 process engineer isomerization Jobs found