Structural Engineer

Senior Manufacturing Engineer

Junior Graphic Designer (Contractual)

R&D Product Development Engineer - Bengaluru

MPDE CA Process Design Engineer(Senior Engineer)

Sr R&D/Product DVL Engineer

Manufacturing Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

Role Description: <ul><li>This position will require an experienced, results-oriented professional to be responsible for Structural engineering.</li><li>The position will work in a multi-discipline team executing a variety of chemical manufacturing support projects and tasks to support our manufacturing sites.</li></ul> Responsibilities: <ul><li>Work with remote team members and global counterparts to develop deliverables required for structural fabrication and installation of projects and hence excellent communication skills a pre-requisite.</li><li>Provide structural analysis and engineering calculations of a variety of material types including but not limited to steel and concrete.</li><li>Provide structural analysis of steel and concrete elements.</li><li>Well versed with connection design calculations.</li><li>Participate in team model reviews.</li><li>Review Design Drawings</li></ul> Requirements: Basic Qualifications: <ul><li>Master’s degree in Structural Engineering from a reputed premiere institute.</li><li>Minimum 5 years of work experience in an Engineering and/or Engineering Services organization.</li><li>Must have engineering experience performing structural calculations and analysis of structures.</li><li>Computer Environment: Microsoft: Word, Excel, Power Point</li><li>Proficiency in STAAD Pro software</li><li>Should have exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards</li><li>Excellent written, listening, and verbal communication skills.</li></ul> Preferred Qualifications: <ul><li>Exposure to environments of 2D and 3D CAD tools including Laser Scans, Bentley MicroStation, AVEVA and AutoCAD platforms or equivalent.</li><li>Experience with applicable industry codes including ACI, AISC, IBC and ability to utilize custom internal specifications as they apply to design and installation of structural assemblies and supports. Be able to perform tasks using U.S. or metric standards.</li></ul>

Responsibilities: <ul><li>Lead a dedicated team of engineers and technicians within the Projects or Manufacturing group.</li><li>Ensure that engineers are fully integrated into the overall project team and production support activities.</li><li>Plan and implement training and development programs for direct reports.</li><li>Complete process design and development projects by training and guiding technicians.</li><li>Provide coaching and mentorship to team members.</li><li>Establish engineering goals and objectives aligned with business plans.</li><li>Identify and implement effective, permanent technical and system solutions to problems.</li><li>Consistently meet customer requirements, performance expectations, and deadlines.</li><li>Prepare product and process reports by collecting, analyzing, and summarizing information and trends.</li><li>Champion compliance with internal systems and processes.</li><li>Identify and develop improvements to enhance Service, Delivery, Quality, and Cost metrics using Lean/Six Sigma methodologies.</li><li>Research advanced process technologies and evaluate potential competitive advantages and cost benefits.</li><li>Lead or guide a portfolio of engineering projects in collaboration with cross-functional teams (e.g., NPI, quality engineering, design assurance, R&amp;D).</li><li>Collaborate with teams to plan, coordinate, and implement activities supporting the successful launch of new products, including make/buy analysis, new process introduction, and more.</li><li>Develop or modify manufacturing processes by studying product requirements and designing, modifying, or testing manufacturing methods and equipment.</li><li>Maintain professional and technical knowledge through workshops, publications, networking, and participation in professional societies.</li><li>Manage external relationships with key technology suppliers.</li><li>Oversee workload distribution among engineers and technicians to meet operational and business priorities.</li></ul>&nbsp;Requirements: Education &amp; Experience <ul><li>Bachelor’s degree or equivalent in an Engineering field with 5–10 years of experience in a demanding high-volume production environment or a high-mix, low-volume environment.</li><li>Experience in medical devices or similar regulated manufacturing and quality systems is essential.</li><li>Proficiency with CAD tools; SolidWorks preferred.</li><li>Experience using Minitab, MS Project, and advanced Excel.</li><li>Demonstrated ability to lead a production-focused team, drive technical problem solving, and manage line setup including equipment acquisition and process development.</li><li>Working knowledge of Lean and/or Six Sigma engineering principles with proven results.</li><li>Statistical knowledge, including data analysis and statistical software (JMP, Minitab, etc.).</li><li>Lean Six Sigma Green Belt certification preferred.</li><li>Excellent communication, planning, and organizational skills.</li><li>Self-motivated with strong decision-making abilities.</li><li>Willingness to work independently and to take on an international assignment of up to 3 months.</li><li>Fluent in English (written and verbal), &gt;80% proficiency.</li></ul>

This is 1 year Contractual role. Responsibilities: <ul><li>Support the Marketing team in developing design for both online and offline channels, including social media content, banners, POSM, key visuals and other marketing materials.</li><li>Handle regulatory-related artwork tasks such as product label adjustments, packaging updated and compliance revisions.</li><li>Develop creative concepts and produce high-quality artwork that align with brand identity and campaign objectives.</li><li>Collaborate and communicate with regional teams to align on briefs, feedback and deliver final artwork to meet expectations.</li><li>Work with external agencies by ensuring all deliverables align with brand guidelines.</li><li>Adapt, resize master assets for various markets, formats and platforms as required.</li><li>Create realistic products and packaging mockups to support presentations and marketing materials.</li><li>Ensure all artwork is delivered on time while maintaining high levels of accuracy, consistency and attention to details.</li><li>Support ad hoc design requests and collaborate with cross-functional teams when needed.</li></ul> Requirements: <ul><li>Education Background: Communication/Design/Creative</li><li>Education Level: Bachelor’s Degree</li><li>Working Experience: Min 2-3 years of working experiences in related area</li><li>Experience on brand design and copywriting , Adobe creative suite (Adobe illustrator &amp; Adobe Photoshop), 3D mock-up, Adobe premiere pro/adobe after affects will be a plus</li></ul>

Role Description:&nbsp;<ul><li>Design &amp; Development of automotive connector system.</li></ul> Responsibilities: <ul><li>Responsible for mechanical design of Connectors based on customer requirement for TS.</li><li>Responsible to carry out detailed mechanical design work including 3D modelling, Proposal /detail drawings for costing / production, initiating simulation and prepare design verification / product validation plan per requirement.</li><li>Responsible for choosing standard parts, features, material as per internal guidelines which would meet the internal / customer target process and cost.</li><li>Responsible for preparing and presenting design reviews per manufacturability, update design per suggestion and keep record.</li><li>Responsible for carrying out design change requests in a timely manner / own the product responsibility&nbsp;</li></ul> Requirements: <ul><li>B.E/B. Tech in Mechanical Engineering (equivalent) / Diploma with Post graduation&nbsp;</li><li>Knowledge about various phases of product realization / product development.</li><li>Knowledge of state-of-the-art design tools such as Creo / CAD tools,</li><li>Basic knowledge in manufacturing process (Machining, Molding, Stamping, Plating, etc.,)</li><li>Following are added advantage - Geometric Dimension &amp; Tolerancing (GD&amp;T), GPS, Electrical &amp; Electronic Components design and Development.</li><li>1-4 years of experience in Concept Design and Development of products preferably in plastic and stamped parts.</li><li>Good knowledge in Creo software / CAD tools, PDM windchill / Similar,</li><li>Basic knowledge about Tolerance stack-up and GD&amp;T / GPS</li><li>Basic knowledge on Plastics &amp; Sheet Metal components will be added advantage.</li><li>Good Conceptual, problem solving and Analytical Skills.</li><li>Ability to communicate effectively and accurately across multi-cultural groups.</li><li>Excellent Communication and Presentation skills.</li></ul>

Responsibilities: Process Solution Development: <ul><li>Design or optimize production process routes based on product design drawings (e.g., mechanical structures, electrical schematics), including raw material selection, process planning (e.g., cutting, wire pre-treatment, welding, forming, assembly, testing), equipment selection and parameter setting, and DOE development to ensure mass and stable production.</li><li>For new products (e.g., mechanical parts, electronic components), organize DFM reviews within the MPDE department, provide optimization suggestions from a manufacturability perspective, develop trial production process plans, participate in trial production, and resolve process issues (e.g., dimensional deviations, assembly difficulties, inefficiencies).</li></ul> Process Documentation: <ul><li>Prepare standardized process documents, such as SOPs, process flowcharts, PFMEA, and inspection standards, to clarify operational specifications and quality control points for each process, ensuring unified execution by production personnel.</li></ul> Production Efficiency and Quality Optimization: <ul><li>Analyze existing production processes, use lean production tools (e.g., 5S, value stream analysis) or technical improvements (e.g., introduction of automated equipment, process consolidation) to reduce production costs, shorten cycle times, and enhance capacity.</li><li>Collaborate with the quality department to investigate the causes of quality anomalies (e.g., excessive defect rates) from a process perspective (e.g., insufficient equipment precision, unreasonable process parameters), develop improvement measures, and validate their effectiveness through DOE.</li></ul> Cross-Department Collaboration: <ul><li>Work with R&amp;D departments, participate in product design reviews, provide suggestions from a process feasibility perspective (e.g., simplifying structures to reduce assembly difficulty), and promote Design for Manufacturability (DFM).</li><li>Communicate with supply chain departments to confirm the process compatibility of raw materials and assist in resolving process-related issues with purchased materials. Cooperate with production departments to train operators on new processes and equipment, ensuring successful implementation.</li><li>Collaborate closely with automation teams, participate in automation solution reviews, and develop validation methods.</li></ul> Technological Innovation and Cost Reduction: <ul><li>Stay updated on industry advancements (e.g., 3D printing, smart inspection equipment, laser welding), evaluate their applicability to existing production, and drive process upgrades. Achieve cost reduction through process optimization and the use of alternative low-cost materials (without compromising quality).</li></ul> Requirements: Education and Major: <ul><li>Bachelor’s degree or higher in Mechanical Engineering, Materials Science and Engineering, Industrial Engineering, Electrical Automation, or related fields.</li></ul> Knowledge and Skills: <ul><li>Mastery of fundamental manufacturing process principles (e.g., machining, electronic assembly, heat treatment) and familiarity with production processes in at least one industry (e.g., automotive parts, electronic devices, machinery manufacturing).</li><li>Strong process analysis skills, ability to interpret drawings using CAD/SolidWorks, and perform data analysis with tools like Minitab (e.g., analyzing defect rate causes).</li><li>Knowledge of quality and efficiency improvement methods such as Lean Production and Six Sigma; prior experience in process optimization projects is preferred.</li></ul> Experience Requirements: <ul><li>Typically requires 5+ years of experience in process development or production technical support in relevant industries; familiarity with high-speed cable equipment and process requirements is preferred.</li></ul>

Role Description: <ul><li>As Sr R&amp;D/PRODUCT DVL ENGINEER in Digital Data &amp; Networks (DDN) Business Unit, you will work in a global sustaining engineering team responsible for the continued support and evolution of production parts and products throughout their lifecycle.</li><li>This includes driving product lifecycle management, product extensions, rapid NPIs, VAVE initiatives, sustainability improvements, material and process changes, and manufacturing location transfers.</li><li>The role also involves providing technical support to plants, suppliers, and customers to ensure continuity, quality, and cost optimization.&nbsp;</li></ul> Responsibilities: <ul><li>Responsible for sustaining activities for the Antenna, RF, COAX cable and connector product lines.</li><li>Execute critical engineering projects, including manufacturing transfers, sustaining, product extensions, cost reduction (VAVE), sustainability and rapid New Product Introduction.</li><li>Represent engineering in customer meetings, project meetings and site visits, providing technical support and insights as needed.</li><li>Support the complete product life cycle (Design updates, Creation of product specifications, 3D/2D modeling, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustaining till product end of life).</li><li>Work closely with PM and other cross functions in getting the right and clear requirements to make engineering evaluation/proposal to update the design.&nbsp;</li><li>Follow sustaining Project Process to support project team from PDE perspective to complete Project on time, quality and budget.</li><li>Technical support for customers, sales, PM and plant team. Define &amp; coordinate with test lab for necessary qualification testing, engineering analysis, trouble shooting and verification.&nbsp;</li><li>Apply engineering is the best practice to reduce costs and sustain exiting products to meet customers’ cost targets.</li><li>2D &amp; 3D drawing creation (Creo and SolidWorks Preferred) and release as per our client and procedures through ECR/ECN/PCN processes.</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical, or a related Engineering discipline; advanced degree preferred.</li><li>8+ years working experience as new product development or sustaining engineering related positions including 3+ years of working experience on product development of Antenna, RF, COAX cable and connector.</li><li>Strong foundation in mechanical engineering principles with proven application in product development.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Understanding product compliance certification and qualification testing.&nbsp;</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Demonstrated problem-solving and root cause analysis.</li><li>Proven expertise in sustaining engineering and product lifecycle support, including design enhancements, prototyping, testing, and cost/productivity improvements (VAVE).</li><li>Understanding of product lifecycle management (PLM) and new product development (NPD) processes.</li><li>Hands-on experience with modern design and analysis tools including 3D CAD, modeling, Geometric Dimensioning &amp; Tolerancing (GD&amp;T), and simulation tools.</li><li>Knowledge of manufacturing processes such as machining, molding, stamping, and plating.</li><li>Basic understanding of quality tools and methodologies such as FMEA, Six Sigma, DOE, 8D, etc.</li></ul>

Responsibilities: <ul><li>Develop, implement, and optimize manufacturing processes to improve efficiency, quality, and cost-effectiveness.</li><li>Provide technical support for new product introduction (NPI), including process design, tooling, and equipment validation.</li><li>Conduct root cause analysis and lead corrective/preventive actions (CAPA) to&nbsp;</li><li>resolve production issues.</li><li>Collaborate with cross-functional teams (R&amp;D, Quality, Supply Chain, Maintenance) to ensure smooth project execution and production readiness.</li><li>Prepare and maintain process documentation, work instructions, and training materials.</li><li>Monitor key production metrics (yield, scrap, cycle time, downtime) and implement continuous improvement initiatives.</li><li>Participate in lean manufacturing, Six Sigma, and Kaizen activities to drive operational excellence.</li><li>Ensure compliance with safety standards, environmental regulations, and ISO/IATF quality system requirements.</li><li>Support cost reduction projects through process improvement, automation, and supplier collaboration.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field.</li><li>3–5 years of relevant experience in manufacturing engineering; automotive or electronics industry experience preferred.</li><li>Strong knowledge of manufacturing processes such as machining, assembly, injection molding, stamping, or PCB assembly (depending on industry).</li><li>Familiarity with APQP, PPAP, FMEA, Control Plan, and other quality tools.</li><li>Proficiency in CAD software (e.g., AutoCAD, SolidWorks, Creo) and MS Office.</li><li>Hands-on experience with Lean Manufacturing and problem-solving methodologies (5Why, 8D, DMAIC).</li><li>Good communication and coordination skills; able to work in cross-functional and multicultural teams.</li><li>English: able to read and write technical documents; spoken English is a plus.</li></ul>

Responsibilities: <ul><li>Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality</li><li>Develop, validate, and implement manufacturing processes and tooling for new and existing products</li><li>Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability</li><li>Identify root causes of production issues and implement corrective and preventive actions</li><li>Lead Lean Six Sigma and 5S initiatives across the production floor</li><li>Support capacity planning and equipment layout optimization</li><li>Develop and maintain process documentation, work instructions, and standard operating procedures</li><li>Ensure compliance with safety standards, quality systems, and regulatory requirements</li><li>Mentor junior engineers and provide technical guidance to the operations team</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field</li><li>Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques</li><li>Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis</li><li>Proficient in CAD software and Microsoft Office applications</li><li>Excellent analytical, problem-solving, and communication skills</li><li>Ability to lead cross-functional teams and manage multiple projects</li><li>Experience in the electronics or connectivity components industry is an advantage</li></ul>

Responsibilities:&nbsp; <ul><li>Lead process development, implementation, and documentation for bulk cable manufacturing.</li><li>Support product/process validation and transfer activities.</li><li>Assist with product qualification, working closely with engineering and test lab teams.</li><li>Partner with Product Development/Design Engineering to ensure manufacturability.</li><li>Interact with test laboratories on process/product qualification tasks, including DOE, PFMEA, 8D investigations, and Failure Analysis (FA).</li><li>Support tooling specification and design for manufacturing processes.</li><li>Provide engineering support to additional manufacturing sites as required.</li><li>Collaborate with suppliers to ensure process compliance and capability.</li><li>Support SAFE (Safety Activities For Employees) and ISO quality compliance initiatives.</li><li>Provide technical support for manufacturing maintenance activities.</li><li>Participate in cross-functional projects that support business growth and continuous improvement.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of materials, processes, and systems used in wire and cable manufacturing.</li><li>Proficient in CAD software for tooling and process design.</li><li>Practical knowledge and experience with SPC (Statistical Process Control), Six Sigma, and Lean Manufacturing principles.</li><li>Ability to manage multiple projects and deliver results under tight timelines.</li><li>Willingness to travel internationally up to 30% as required.</li></ul>

Responsibilities: <ul><li>Overall molding process development, coordinating with interaction processes (Stamping, Plating, Assembly) to ensure the best process and cost for F/Gs</li><li>Concept design &amp; proofing for Molding process and tooling, Process development DOE.</li><li>Technical leader and trouble shooter from LVM to HVM in process development, tooling design &amp; qualification, issue finding and problem solving</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements:﻿ <ul><li>Bachelor or above degree in mechanical engineering or related background.</li><li>5+ years Mold design, Process and Troubleshooting knowledge / experience.</li><li>Strong knowledge of tool fabrication, tool-steel application/selection, heat treating, and plating/coating.&nbsp;</li><li>Strong knowledge of injection molding processes (Injection, Insert-molding, two-shot, etc.).</li><li>Strong understanding of plastic, injection machine, auxiliary equipment (strip feed, camera, etc).</li><li>Good at Mold flow simulation and analysis.</li><li>Familiar with BTI 5-Step process, and Knowledge of SIM (Scientific Injection Molding).</li><li>Understand tolerance calculations and Geometric Dimensioning and Tolerancing.</li><li>Data oriented issue finding and problem-solving skills.</li><li>Rich shopfloor hand on experience.</li><li>Sensitive on product cost, know how to drive cost through manufacturing process development &amp; design optimization.</li><li>Fluent in using of basic process development related tools like DFM, PFMEA，DOE，FAA, CTAR，CAD，Pro E</li><li>Knowledge of quality control and quality issue analysis and improvement</li><li>Good teamwork and communication skills。</li><li>Fluent in written and Spoken English.</li><li>Oversea working experience is a plus</li></ul>

Skills

Industry

Location

Jobtitle

11 3d cad Jobs found

Structural Engineer

Senior Manufacturing Engineer

Junior Graphic Designer (Contractual)

R&D Product Development Engineer - Bengaluru

MPDE CA Process Design Engineer(Senior Engineer)

Sr R&D/Product DVL Engineer

Manufacturing Engineer

Senior Manufacturing Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

11 3d cad Jobs found

Structural Engineer

Senior Manufacturing Engineer

Junior Graphic Designer (Contractual)

R&D Product Development Engineer - Bengaluru

MPDE CA Process Design Engineer(Senior Engineer)

Sr R&D/Product DVL Engineer

Manufacturing Engineer

Senior Manufacturing Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

MFG & Process Development Engineer II – Molding

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.