Advanced Quality, Senior Engineer

Sr. Manager, Quality & Reliability Engineering

R&D/Product Dvl Engineer II

Electrical Engineer – Industrial Power

Manufacturing Engineer

Process Engineering Manager

Manager II – Manufacturing & Process Development Engineering

Facilities Technician

R&T Project Leader (Validation & Project Management)

Senior Product Development Engineer

Responsiblities: <ul><li>Design Quality Assurance: Organize and facilitate Design Reviews (DR) and DFMEA sessions to ensure robust product design and risk mitigation.</li><li>Prototype &amp; Sample Build Quality: Implement quality planning and controls for prototype/sample builds, including documentation and build record management.</li><li>Measurement System Validation: Conduct Measurement System Analysis (MSA) for inspection systems and gages used in the project.</li><li>Development Stage Quality Oversight: Analyze samples, address quality issues, and drive improvement actions during product development.</li><li>Verification &amp; Qualification: Lead design verification activities prior to design freeze and manage product qualification testing before Gate 5.</li><li>Tool &amp; Process Validation: Perform process capability studies and support Final Tool Approval (FTAR) using Comprehensive Tool Approval Reports (CTAR).</li><li>Production Quality Control: Establish and maintain quality controls and documentation for the production shop floor.</li><li>Ongoing Quality Monitoring: Monitor process capability and manage corrective actions to ensure sustained quality performance.</li><li>Inspection Review: Review and approve measurement and cosmetic inspection results to ensure compliance with specifications.</li><li>Audit Support: Provide support during customer and internal/external quality system audits.</li><li>Lead the development and implementation of Advanced Quality Planning (AQP) tools and methodologies within cross-functional product development teams.</li><li>Manage and mitigate project risks, ensuring customer requirements are clearly understood and integrated from the outset.</li><li>Conduct design and process audits for NPI projects, ensuring compliance with internal and external standards.</li><li>Collaborate closely with manufacturing sites to ensure seamless transition from design to production, including training facilitation and sharing of best practices and lessons learned.</li><li>Support customer complaint investigations during NPI, including documentation collection, in-process record review, and postmortem analysis.</li><li>Ensure effective deployment of control plans and support supplier development and management to meet quality expectations for NPI shipments.</li></ul> Requirements: <ul><li>Bachelor’s degree or higher in Electrical, Mechanical Engineering, or a related field.</li><li>Min 4 years experience in advanced quality</li><li>Proven quality control experience in cable assemblies, connectors, sockets, or related industries.</li><li>Strong understanding of ISO 9001 and APQP procedures.</li><li>Familiarity with EIA-364 test methods and internal/external auditing practices.</li><li>Knowledge of Model-Based Definition (MBD) and GD&amp;T requirements.</li><li>Proficient in Root Cause Analysis (8D, Fishbone, 5 Whys).</li><li>Skilled in Risk Management (DFMEA/PFMEA), Process Capability (Cp, Cpk, Pp, Ppk), and Tolerance Stack-Up Analysis.</li><li>Experienced in Design of Experiments (DOE) and Six Sigma methodologies (Black Belt preferred).</li><li>Competent in data analytics and visualization tools (Power BI, Tableau, Python/R).</li><li>Skilled in statistical software such as Minitab and JMP.</li><li>Strong organizational and strategic planning abilities.</li><li>Effective communicator with excellent written and verbal English skills.</li><li>Ability to mentor junior engineers and lead cross-functional teams.</li><li>Demonstrated capability in change management and driving continuous improvement.</li><li>Strong interpersonal skills for conflict resolution and stakeholder negotiation.</li><li>Committed to delivering high-quality solutions aligned with customer expectations and business strategy.</li></ul>

Responsibilities: <ul><li>Lead a global team of Advanced Quality Engineers in support of all new product introductions for a Strategic Product Line Portfolio within the Digital Data Networks (DDN) business unit. Lead all AQE activities from project inception to product launch and introduction.</li><li>Participate in the project Kick-off Meetings, support project team development for internal requirements, customer specific requirements, Risk Priority Number (RPN) reductions, analyze SPC data, etc.</li><li>Serve as the liaison between engineering and the plants on new product introductions to ensure robust process capability on all programs.</li><li>Attend project meetings and APQP driven events with the customers and the Project/Program Management Team.</li><li>Document the results for specific program characteristics and ensure the internal and external requirements are met including deviations.</li><li>Accountable for developing and driving on time delivery of Control Plans, Capability Studies, Part drawings, Inspection Instructions, Gage design and R&amp;R, DFMEAs, PFMEAs, AFMEAs for all assigned projects. Ensure the products developed are Designed for Manufacturing &amp; Assembly (DfMA) and are launched capably of meeting internal requirements and customer requirements.</li><li>Understand product requirements and define/approve Design Validation Test (DVT) and quality plans to ensure products meet the product specifications.</li><li>Authorize and approve that all Design Validation Test (DVT) results meet product specifications and customer requirements.</li><li>Actively participate in early product Concept Reviews and Design Review meetings with the Product Development Engineering (PDE) for the assigned product, related tooling and fixturing, and overall quality plans.</li><li>Generate and/or champion 8-Ds for the prototype process including 8-Ds for problem solving, test failures, and prototype failures.</li><li>Complete the Change Control process and identify special characteristics for projects/programs.</li><li>Work in conjunction with the Manufacturing Process Development Engineering (MPDE) teams to ensure the manufacturing process and equipment meets the product’s defined quality level and that the process also meets the capability levels identified for the product and project.</li><li>Assemble and submit PPAP package on time to the customer specific requirement.</li><li>Team with Supplier Quality Engineers to conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR), support completion of Supplier PPAPs.</li><li>Perform Six Sigma Capability Analysis of new equipment/processes to reduce variation.</li><li>Regularly reports to executive management on the overall performance and effectiveness of the Global Supplier Quality Program.</li><li>Drive high performance organization by providing your team routine coaching and feedback, holding your team accountable to meet performance objectives, and providing meaningful development to increase individual/team capability.</li><li>Manage employee well-being by prioritizing work, effectively managing resource loading, and providing flexibility to enable employees to successfully balance their work and personal lives.</li><li>Drive organization effectiveness by structuring your organization in a way that best enables the BU strategy, maximizes resource efficiency and productivity, and provides role clarity and clear lines of accountability.</li><li>Manage the talent in your organization to support the business now and to proactively prepare for the future by identifying organization skillset/role gaps, implementing plans to fill any skillset/role gaps, and assessing current talent fit to ensure the right talent is matched to the right roles to best meet the needs of the business.</li></ul> Requirements: <ul><li>Bachelor/ Master’s degree in technical discipline (Electrical Engineering, Electronics, Mechatronics)</li><li>10+ years of Experience in Quality, Advanced Quality Engineering, and working in global organizations.</li><li>Experience managing engineering teams in cross-functional, multi-site global organizations to drive effectiveness across geographical boundaries and deliver projects with multiple dependencies and constraints.</li><li>Demonstrated ability to forge strong internal working relationships with senior functional counterpart leaders.</li><li>Experience in the use of Lean, Six Sigma, Design for Six Sigma (DFSS), Design for Manufacturability &amp; Assembly (DfMA), Kaizen, 8D and other advanced statistical methods including Design of Experiments (DoE), Statistical Process Control (SPC) and Process Capability (CpK) analysis techniques.</li><li>Comprehensive knowledge and understanding of departmental, company, and corporate procedures and systems, i.e. ISO9000, ISO9001, IATF16949, ISO14001, VDA, PPAP, DFMEAs, PFMEAs, APQP Gate Reviews, GD&amp;T.</li><li>Excellent verbal and written communication skills and the ability to interact professionally with customers, leadership, stakeholders, cross functional teams and subject matter experts.</li><li>Proven track record of being able to work on multiple demanding programs in parallel while maintaining on-time completion of all defined project tasks and deliverables.</li><li>Ability to prioritize responsibilities in a fast-paced dynamic work environment.</li><li>Willingness to travel as required, ~30%</li></ul>

Responsibilities: <ul><li>Subject matter expert in signal integrity design, simulation and validation activities through product development cycles</li><li>Establishing signal integrity design performance/functional requirements for new products</li><li>Performing signal integrity simulations for multiple high-speed standards on each product. This includes determining the correct simulation methodology and setup to use, as well as a good understanding of the criteria for each interface.</li><li>Performing PCB design schematic and layout reviews</li><li>Creating actionable recommendations based upon design reviews and simulation results</li><li>Guiding connector design and component qualifications from a signal integrity standpoint. Making data driven decisions about the product functionality and areas for improvement.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering.</li><li>Experience with interconnect design or experience with connector &amp;/or cable/cable assembly design (high speed twinax/RF cables, direct attach copper (DAC) cables)</li><li>Demonstrated experience using Signal integrity analysis tools (Agilent ADS, Ansys HFSS or equivalent)</li><li>A solid understanding of electromagnetic theory and electrical circuit behavior</li><li>Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem.</li><li>Familiarity with printed circuit board design, fabrication and assembly.</li><li>Excellent verbal and written communication skills</li><li>Ability to work in a global environment – able to accommodate varying time zones, fluent in English (verbal/written), able to collaborate with individuals across geographies</li><li>Solid presentation skills with an ability to clearly communicate technical concepts to diverse audiences in English</li><li>Individual must be highly motivated, a quick learner, and able to work independently</li></ul>

Responsibilities: <ul><li>Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications.</li><li>Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements.</li><li>Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.</li><li>Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.</li><li>Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. </li><li>Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.</li><li>Fabricate or modify RF components to change their performance or enable access for instrumentation.</li><li>Instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.</li><li>Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.</li><li>Support System Integration during the assembly and final testing of new product designs.</li><li>Interface with other groups to workout design, systems architecture development and integration issues.</li><li>Define all equipment interfaces and systems architecture and ensure they are up to date and documented.</li><li>Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.</li></ul> Requirements: <ul><li>PhD/ Master/ Bachelor’s degree in Electrical or Mechanical Engineering with few years of relevant RF experiences</li><li>Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment</li><li>Knowledge of circuit theory and ability to develop analytical models of RF components</li><li>Problem-solving and troubleshooting skills</li><li>Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders</li><li>Self-starting individual, proactive and resourceful</li></ul>

Responsibilities: <ul><li>Responsible for various KPI’s pertaining manufacturing engineering and Team Management skills is must.</li><li>Responsible for assembly Process, Tool Design development, (New &amp; Old tools) Qualification and Trial</li><li>Improves manufacturing efficiency by analyzing planning workflow, space requirements, and equipment layout</li><li>Work with Global COE Assembly to drive continuous improvement in Assembly Technology / Process</li><li>Maintain proper documentation and for all assembly tooling, Spares and Process Set-up&nbsp;</li><li>Ensure all Tooling / automation design drawings (Soft &amp; Hard Copy) are up to date.</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Coordinate with Manufacturing Engineer for new product development and process improvement.</li><li>Assessing resource requirements and opportunity for Automation and Process Productivity improvement</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li><li>Visit vendors for Assembly tooling assessment (Capability, Know How &amp; Capacity)</li><li>Monitoring of AM and PM and Effectiveness&nbsp;</li><li>Able to run the machine and instruct and train technicians to run the machine</li><li>CCD and PLC and Electrical Knowledge Preferably</li></ul> Requirements: <ul><li>Bachelor in Mechanical Engineering major or Electrical Engineering</li><li>10+ years’ experience and practitioner in the automation assembly and Tooling Design &amp; Development</li><li>CAD Knowledge Must, preferably Pro E / Creo &amp; Auto-cad, Solidworks, HMI (Human Machine interface).</li><li>DFM analysis, New automation or manual assembly / Tooling RFQ.</li><li>Assembly line Tooling &amp; Tool Debugging Knowledge.&nbsp;</li><li>Computer Knowledge, MS Office etc, SAP knowledge added advantage</li><li>Integrity; Accountability; Communication; Outgoing&nbsp;</li><li>Ergonomic and lean manufacturing practitioner</li><li>Advance digital acumen, MES (Manufacturing Execution System) and traceability.</li></ul>

Responsibilities: <ul><li>Own and lead the process engineering function for cleanroom assembly, end-of-line test and pre-packing, ensuring safe, compliant and capable processes that meet cost, quality, safety and delivery targets.</li><li>Define department objectives, KPI dashboard and governance (e.g., NPI definition and handover lead times, first pass yields, failure rates, quality qppm) and drive execution through standard routines and reviews.</li><li>Lead, coach and develop a team of process engineers / technicians; set clear expectations, provide performance feedback, support competency development and ensure effective succession and talent retention.</li><li>Plan and manage resources (headcount, skills, priorities) to support daily manufacturing needs, escalations, and strategic projects; balance workload across product series and value streams.</li><li>Own process engineering deliverables for NPI or transfer projects: feasibility, process concept, capacity planning, industrialization roadmap, and readiness reviews to ensure on-time SOP.</li><li>Lead cross-functional collaboration with Product Design, Quality, Production, Maintenance, Supply Chain and global counterparts to deliver robust processes supported by Design for Manufacturing / Assembly / Test (DFM / DFA / DFT) improvements.</li><li>Own the strategy and budget for process equipment, tools, fixtures, testers and workstations; approve specifications, manage procurement, acceptance, validation and release to production.</li><li>Drive continuous improvement programs (CIP / Darwin) to improve throughput, cycle time, productivity and cost; support CIP events and ensure sustained gains through standardization.</li><li>Ensure effective utilization of PFMEA and other quality tools to manage and mitigate quality risks during process development, acceptance and production release.</li><li>Develop engineering procedures to govern end-to-end process engineering activities across process design, definition, industrialization, handover, sustainment and continuous improvements.&nbsp;</li><li>Ensure upkeep of process work instructions in D365 via Process Control System as per global standards, including revisioning control based on valid change management procedures.</li><li>Ensure robust management of engineering changes (ECR), process changes and deviations, including impact assessment, validation and controlled implementation.</li><li>Own 8D problem-solving governance for process-related issues, ensure timely root-cause containment / corrective and preventive actions, lessons learned, and clear communication to stakeholders.</li><li>Drive safety, ergonomics and regulatory / ISO compliance for process engineering scope; ensure safe equipment and process design through risk assessments.</li><li>Drive the sustainable deployment of state-of-the-art engineering solutions on the assembly shop floor to enhance quality control through robust error-proofing (poka‑yoke) mechanisms and digitalizations.</li><li>Act as the site focal point to align with global and process engineering counterparts on technology roadmaps, best practices and standardization.</li><li>Manage departmental reporting, change control and communication: provide clear status updates, risks and mitigation plans to operations and leadership.</li><li>Support ad hoc tasks as assigned by superior.</li></ul> Requirements: <ul><li>8–12+ years’ experience in manufacturing/precision mechanical assembly (high-mix preferred), with demonstrated ownership of end-to-end process engineering (process development/industrialization, cleaning / helium leak testing, and controlled-environment or cleanroom assembly where applicable).</li><li>Bachelor’s/Master’s degree in Mechanical, Manufacturing, Industrial Engineering or equivalent; formal training in Lean/Six Sigma and structured problem solving will be added advantage.</li><li>Proven people leadership experience (hiring, coaching, performance management) with the ability to lead technical teams and influence cross-functional stakeholders to deliver manufacturing results.</li><li>Strong written and spoken English communication skills, including the ability to produce clear technical documentation, present KPI performance, and communicate risks / mitigation to leadership.</li><li>Strong understanding of mechanical / pneumatic / electromechanical systems, process equipment and tooling, with experience defining specifications, commissioning, qualification / validation and release to production.</li><li>Demonstrated ownership and governance mindset - sets clear standards, drives disciplined execution, and maintains strong internal / external customer focus.</li><li>Strong prioritization, planning and project management skills to manage multiple workstreams (daily support, escalations, NPI, CIP) under tight timelines and resource constraints.</li><li>Strong technical acumen in quality planning processes especially in definition of process controls based on PFMEA.</li><li>Data-driven operational leadership: builds KPI dashboards, drives root-cause problem solving (8D / A3), and delivers sustained improvements in yield, throughput / cycle time and qppm.</li><li>Strong stakeholder management and change leadership - able to drive alignment across Production, Quality, Maintenance, Supply Chain and global counterparts; comfortable leading reviews and escalations.</li></ul>

Responsibilities: Lead a team of engineers who will: <ul><li>Develop power connector assembly manufacturing process in accordance with LEANPD product development.</li><li>Drive for excellence in existing manufacturing technologies and methods.</li><li>Strive to implement new manufacturing technologies to provide improved process and tolerance control.</li><li>Support Product Development in the optimization designs (DFM) and piece parts for manufacturability; realizes sample tooling, product samples, and prototypes.</li><li>Design, develop, and qualify tooling and processes to meet company DDN quality and production standards.</li><li>Support the supply chain to verify supplier compliance and capability.</li><li>Act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Maintain communication with the project management team to understand current and future strategic business needs</li><li>Prioritize and time manage a portfolio of projects/work efforts based on criticality and business need</li><li>Provide readouts to Senior manager and Director-level cross-functional management as necessary</li><li>Work with the Philippines operations team to assign resources necessary for the successful execution of new product development</li><li>Facilitate and coordinate cross-functional communication across globally matrixed organizations</li></ul> Requirements: <ul><li>Bachelors or above degree with mechanical/electrical related majors.</li><li>At least 5 years of managerial-level experience related to a multinational manufacturing site.</li><li>Familiar with Lean, Six Sigma. etc. industrial methods/tools.</li><li>With 2 years or above work experience in the connector assembly industry is preferred.</li><li>Fluent in English and good presentation skills.</li><li>Familiar with MS software.</li><li>Familiar with industrial specification (i.e., IPC 620).</li><li>Familiar with Stamping / Plating / Molding / Assembly processes</li></ul>

Responsibilities: <ul><li>Oversee day-to-day facility operations including HVAC systems (WCPU), air compressors, air dryers, sewage treatment systems, and general building maintenance with work at height compliance.</li><li>Provide hands-on support for: - Cooling tower infill services - Split unit A/C maintenance - Compressed Dry Air (CDA) piping installation - A compressor piping - New production line setup including electrical wiring</li><li>Supervise the infrastructure, ensuring safe and efficient operation in accordance with Malaysian electrical codes.</li><li>Manage and execute facility installation projects, expansions, and upgrades in line with production needs.</li><li>Ensure adherence to safety protocols, environmental regulations, and industry standards.</li><li>Collaborate with production, quality, and engineering teams to align facility operations with manufacturing targets.</li><li>Handle vendor management and oversee service contracts for equipment maintenance and utilities.</li><li>Perform routine troubleshooting and preventive maintenance, minimizing downtime and enhancing productivity.</li><li>Maintain detailed documentation, reports, and Preventive Maintenance (PM) records.</li></ul> Requirements: <ul><li>Minimum 3 years of experience in facility management within a manufacturing environment, preferably in antenna, electronics, or cable assembly industries.</li><li>Solid hands-on expertise in: - HVAC systems - Air compressors - CDA piping and A compressor piping - Electrical and mechanical facility systems</li><li>Familiar with energy efficiency practices, sustainability initiatives, and lean manufacturing principles.</li><li>Strong problem-solving skills and the ability to work independently in a fast-paced production setting.</li></ul>

Responsibilities: <ul><li>Lead reliability and validation activities across the full NPI lifecycle for DDN Power and Cable Assembly products.</li><li>Play a critical role in the DFMEA process, identifying risks and defining robust mitigation plans cross-functionally.</li><li>Develop comprehensive Reliability and Validation Strategies per project based on VOC and DFMEA outputs.</li><li>Define and align test scope, objectives, sample size, test duration, conditions, cost, and sequencing.</li><li>Develop standardized Reliability and Validation Methodologies and Procedures.</li><li>Own project-level R&amp;T control documentation and track progress in project management systems.</li><li>Lead R&amp;T technical reviews and regular project update meetings.</li><li>Identify risks, bottlenecks, and gaps; drive mitigation and escalation as needed.</li><li>Act as the single R&amp;T interface to customers and internal stakeholders (PDE, AQE, MPDE, Quality, Manufacturing, Procurement, external labs).</li><li>Lead failure analysis and corrective action implementation.</li><li>Develop and maintain ORT (Ongoing Reliability Test) plans.</li></ul> Requirements: <ul><li>8+ years in Reliability Engineering, Validation, Test Engineering, or Technical Project Management.</li><li>Strong knowledge of DFSS, DfRE, DFMEA, reliability principles and industry standards (EIA-364, IEC62368, IEC 61000, IEC60068, FCC Part 15, IPC9592B, ISTA 3E, ASTM D4169).</li><li>Hands-on experience with Environmental tests (Temperature, Humidity, Altitude, IPxx), Mechanical tests (Vibration, Shock, Drop, Impact, Durability, Packaging), Electrical tests (Power integrity, Signal integrity, Power thermal rise) and Safety/EMC (Hi-pot, LLCR, RE/CE/RS/CS/ESD/Surge).</li><li>Proven ability to lead cross-functional, multi-site engineering teams.</li><li>Strong communication and customer-interfacing skills.</li></ul> Preferred/ Nice to Have: <ul><li>Six Sigma Black Belt or DFSS certification.</li><li>PMP or equivalent Project Management certification.</li><li>Experience supporting hyperscale data center power, cable, or connector applications.</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Skills

Industry

Location

Jobtitle

23 assembly Jobs found

Advanced Quality, Senior Engineer

Sr. Manager, Quality & Reliability Engineering

R&D/Product Dvl Engineer II

Electrical Engineer – Industrial Power

Manufacturing Engineer

Process Engineering Manager

Manager II – Manufacturing & Process Development Engineering

Facilities Technician

R&T Project Leader (Validation & Project Management)

Senior Product Development Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

23 assembly Jobs found

Advanced Quality, Senior Engineer

Sr. Manager, Quality & Reliability Engineering

R&D/Product Dvl Engineer II

Electrical Engineer – Industrial Power

Manufacturing Engineer

Process Engineering Manager

Manager II – Manufacturing & Process Development Engineering

Facilities Technician

R&T Project Leader (Validation & Project Management)

Senior Product Development Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.