Manufacturing Engineer

Sr. Manufacturing & Process Development Engineer

R&D Product Development Engineer II

R&D/Product Dvl Engineer

Solar Design Engineer

Principal R&D/Product Development Engineer (Remote)

R&D Product Development Engineer

124542 Technical Specialist

123457 Senior Mechanical R&D/Product Development Engineer

Responsibilities: <ul><li>Responsible for various KPI’s pertaining manufacturing engineering and Team Management skills is must.</li><li>Responsible for assembly Process, Tool Design development, (New &amp; Old tools) Qualification and Trial</li><li>Improves manufacturing efficiency by analyzing planning workflow, space requirements, and equipment layout</li><li>Work with Global COE Assembly to drive continuous improvement in Assembly Technology / Process</li><li>Maintain proper documentation and for all assembly tooling, Spares and Process Set-up&nbsp;</li><li>Ensure all Tooling / automation design drawings (Soft &amp; Hard Copy) are up to date.</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Coordinate with Manufacturing Engineer for new product development and process improvement.</li><li>Assessing resource requirements and opportunity for Automation and Process Productivity improvement</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li><li>Visit vendors for Assembly tooling assessment (Capability, Know How &amp; Capacity)</li><li>Monitoring of AM and PM and Effectiveness&nbsp;</li><li>Able to run the machine and instruct and train technicians to run the machine</li><li>CCD and PLC and Electrical Knowledge Preferably</li></ul> Requirements: <ul><li>Bachelor in Mechanical Engineering major or Electrical Engineering</li><li>10+ years’ experience and practitioner in the automation assembly and Tooling Design &amp; Development</li><li>CAD Knowledge Must, preferably Pro E / Creo &amp; Auto-cad, Solidworks, HMI (Human Machine interface).</li><li>DFM analysis, New automation or manual assembly / Tooling RFQ.</li><li>Assembly line Tooling &amp; Tool Debugging Knowledge.&nbsp;</li><li>Computer Knowledge, MS Office etc, SAP knowledge added advantage</li><li>Integrity; Accountability; Communication; Outgoing&nbsp;</li><li>Ergonomic and lean manufacturing practitioner</li><li>Advance digital acumen, MES (Manufacturing Execution System) and traceability.</li></ul>

Responsibilities: Automation &amp; Process Development <ul><li>Lead end-to-end development of automation systems, including concept design, hardware/software selection, prototyping, testing, validation, and full-scale implementation.</li><li>Conduct hands-on experimental trials to validate manufacturing processes and gather performance data.</li><li>Collaborate with Product Development teams to ensure designs align with automation and manufacturability standards.</li><li>Develop engineering specifications, preliminary designs, and support pre-production builds and testing.</li></ul> Process Optimization &amp; Problem Solving <ul><li>Apply data-driven methodologies such as Six Sigma, DMAIC, and 8D to identify root causes and improve process capability.</li><li>Analyze yield and process data to develop optimization strategies and enhance efficiency.</li><li>Research and implement new technologies and manufacturing techniques to improve quality and reduce costs.</li></ul> Project &amp; Stakeholder Management <ul><li>Manage multiple engineering projects simultaneously in a fast-paced environment.</li><li>Collaborate with vendors and cross-functional teams to support automation and process development initiatives.</li><li>Provide technical leadership and communicate complex concepts effectively to stakeholders.</li></ul> Documentation &amp; Innovation <ul><li>Prepare detailed technical documentation, design drawings, and process implementation requirements.</li><li>Support submission of invention disclosures for innovative concepts.</li><li>Contribute to the development and deployment of next-generation manufacturing technologies, including AI-driven solutions.</li></ul> Requirements: Education <ul><li>Bachelor’s degree in Electrical, Mechanical, Robotics, Mechatronics, or Electro-Mechanical Engineering (minimum).</li></ul> Experience <ul><li>5–7 years of experience in automation systems and manufacturing engineering.</li><li>Proven experience leading automation projects from concept to implementation.</li></ul> Technical Skills <ul><li>Automation systems: PLCs, HMIs, VFDs, servo motors, sensors, and actuators</li><li>PLC programming: Omron, Siemens, Allen-Bradley</li><li>Industrial robotics troubleshooting: KUKA, ABB, EPSON</li><li>Vision systems: Keyence, Cognex</li><li>CAD tools: Creo, SolidWorks, AutoCAD (2D &amp; 3D)</li><li>Strong electrical and electronic troubleshooting skills</li><li>Experience with Six Sigma / DMAIC / 8D methodologies</li><li>Exposure to Artificial Intelligence (preferred)</li></ul>

Responsibilities: <ul><li>Design &amp; Development of automotive products like Connectors, Header, Terminals, Automotive components.&nbsp;</li><li>Interact directly with customers / Sales and Marketing team to identify key Product Technical requirements / deliverables and establish product specifications to fulfil customer requirements in handling new concepts / quotations.</li><li>To lead and drive complex new product development products starting from concepts generation, DFMEA, DFM/DFA, prototyping &amp; testing.</li><li>To generate 3D CAD models &amp; 2D drawings in PTC Creo for Connector, Terminal, Header &amp; other auto components.&nbsp;</li><li>Responsible for creating test specifications, deciding test methods, DVP Preparations &amp; testing and validation.</li></ul> Requirements: <ul><li>B.E (Mechanical)</li><li>Minimum 2 to 9 years of hands-on experience in automotive plastic components development (preferably Connectors).</li><li>Good Experience in Product validation and testing (DV / PV) of automotive products.</li><li>Exposure to manufacturing processes like Injection molding, stamping, Manufacturing and assembly etc.</li><li>Exposure to APQP &amp; PPAP activities.</li><li>Exposure to Design review processes like DFEMA / DFA / DFM / FEA etc.,</li><li>Exposure to IATF 16949 / TS 16949.</li><li>Problem solving and critical thinking.</li><li>Good CAD Modelling skills (Pro-E / Creo), AutoCAD.</li><li>Strong 2D drawing drafting skills.</li><li>Good working knowledge on GD&amp;T &amp; Tolerance Stack up analysis.</li></ul>

Responsibilities: <ul><li>Develop, implement, and optimize manufacturing processes to improve efficiency, quality, and cost-effectiveness.</li><li>Provide technical support for new product introduction (NPI), including process design, tooling, and equipment validation.</li><li>Conduct root cause analysis and lead corrective/preventive actions (CAPA) to&nbsp;</li><li>resolve production issues.</li><li>Collaborate with cross-functional teams (R&amp;D, Quality, Supply Chain, Maintenance) to ensure smooth project execution and production readiness.</li><li>Prepare and maintain process documentation, work instructions, and training materials.</li><li>Monitor key production metrics (yield, scrap, cycle time, downtime) and implement continuous improvement initiatives.</li><li>Participate in lean manufacturing, Six Sigma, and Kaizen activities to drive operational excellence.</li><li>Ensure compliance with safety standards, environmental regulations, and ISO/IATF quality system requirements.</li><li>Support cost reduction projects through process improvement, automation, and supplier collaboration.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field.</li><li>3–5 years of relevant experience in manufacturing engineering; automotive or electronics industry experience preferred.</li><li>Strong knowledge of manufacturing processes such as machining, assembly, injection molding, stamping, or PCB assembly (depending on industry).</li><li>Familiarity with APQP, PPAP, FMEA, Control Plan, and other quality tools.</li><li>Proficiency in CAD software (e.g., AutoCAD, SolidWorks, Creo) and MS Office.</li><li>Hands-on experience with Lean Manufacturing and problem-solving methodologies (5Why, 8D, DMAIC).</li><li>Good communication and coordination skills; able to work in cross-functional and multicultural teams.</li><li>English: able to read and write technical documents; spoken English is a plus.</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.&nbsp;</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.&nbsp;&nbsp;</li><li>Leads DV/PV test, responsible for resolving product design and test problems.&nbsp;&nbsp;</li><li>Responsible for FAI review, work with project team to release product in time.&nbsp;</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the preproduction stages of new product</li></ul> Requirements:﻿ <ul><li>Education: Bachelor’s degree or above in Mechanical Engineering or equivalent majors.</li><li>3 years of relevant mechanical engineering work experience with electrical components, Motor vehicle connector design.</li><li>Working knowledge in industry standard (USCAR LV214,LV215，USCAR 2.0 ) and related product application</li><li>Knowledge in relevant mechanical design and development, including but not limited to, resin and metal material selection, fundamentals of statics, DFMEA, product qualification, etc.</li><li>Expert in 3D Design Applications (such as Creo, Spaceclaim, etc.)</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T). Proficient at limit and fit analysis including statistical tolerance analysis.</li><li>Proficient in developing and writing design objectives for product specifications</li><li>In depth knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) with experience driving Design for Manufacturing (DFM)</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Optimistic when facing difficulties and team work spirit</li></ul>

Responsibilities: <ul><li>Work with cross functional teams to transform VOC into internal specifications and design features, documented properly as Product Requirements Document.</li><li>Design and develop new products for renewable applications using metallic and polymeric material to meet customer requirements</li><li>Assess technical risk and compliance of project</li><li>Prototype sample development for feasibility studies</li><li>Product Data management of engineering bill of materials</li><li>Executing on cost optimization/reduction (VA/VE) opportunities for the business</li><li>Engineering communication with global team and localize global product teams in China</li><li>Preparing design verification test plans, Design C Process FMEAs, FEAs</li><li>Engineering sample preparation for design and process verification tests</li><li>Executing test plan within the lab, ensuring successful product testing and verification results</li><li>Perform failure mode analyses and improvements to optimize product</li><li>Recording results of design reviews, design decision meetings, and writing technical summaries</li><li>Assisting with product compliance and approvals for all new products and platforms</li><li>Work with FAI approvals, Process Capability Study, judging manufacturing deviations and make decisions on deviation acceptance</li></ul> Requirements: <ul><li>Must have a minimum of an Bachelors degree in a discipline of Engineering</li><li>More than 5 years design experience on connector, plug or terminal. Solar or battery energy storage relevant or power / utility design experience is plus,not must</li><li>Ability to develop connectors to meet critical global standards, such as ANSI, UL, IEEE, and IEC</li><li>Component material selection to optimize strength, electrical insulation, stability, and longevity, while meeting the product and standard requirements</li><li>Basic knowledge of product development processes in a stage-gate approach</li><li>A basic understanding of manufacturing processes, such as molding, stamping, plating, and assembly processes</li><li>Possesses high degree of initiative, technical competence, engineering process knowledge and strong communication skills</li><li>Fluent communication with own team, customers, internal business leaders and technology leaders in English (CET-4 or above)</li><li>LDFSS or DMAIC 6-sigma black or green belt an advantage</li><li>Familiarity of engineering software: Creo or Pro/E</li><li>Mastery of office software, such as Word, Excel, PPT, etc.</li></ul>

Responsibilities: <ul><li>Lead the development of sockets, high-speed connectors, and cable assemblies from market definition to production release.</li><li>Collaborate with cross-functional teams (sales, applications, field engineers, project managers) to translate Voice of Customer (VOC) into technical concepts and specifications.</li><li>Conduct feasibility studies and generate design concepts.</li><li>Perform mechanical and thermal simulations.</li><li>Present design evaluations and proposals to customers.</li><li>Create detailed 2D/3D designs, DFMEA, and tolerance analyses.</li><li>Build and validate prototype samples.</li><li>Finalize product qualification and specifications.</li><li>Provide ongoing technical support to Operations, Quality, and Production teams.</li><li>Manage Engineering Change Notifications (ECN) and Product Change Notifications (PCN).</li><li>Maintain system-level understanding of customer applications and integrate solutions into the design process.</li><li>Drive projects through the LEANPD stage-gate process to ensure timely delivery of high-quality, cost-effective solutions.</li><li>Coordinate with manufacturing, procurement, and external suppliers to align with technical, quality, and cost targets.</li><li>Generate and manage all necessary technical documentation including design drawings, engineering changes, and design history files.</li><li>Support post-launch activities and continuous improvement initiatives.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience.</li><li>10+ years of relevant mechanical engineering experience involving:</li><li>Electrical components and devices.</li><li>Mechanical structure design.</li><li>Manufacturing tooling development (stamping, molding, assembly, plating).</li><li>Manufacturing process development.</li></ul> Strong knowledge in: <ul><li>Socket, connector, and cable assembly design.</li><li>Material selection.</li><li>Tolerance analysis.</li><li>DFMEA.</li><li>Product qualification.</li></ul> Expertise in 3D CAD applications (preferably Creo), including: <ul><li>3D solid modeling (sheet metal).</li><li>2D drawings.</li><li>PDM Link Data Manager.</li><li>General understanding of SpaceClaim, SolidWorks, or other conceptual design tools.</li></ul> Advanced proficiency in: <ul><li>Geometric Dimensioning &amp; Tolerancing (GD&amp;T).</li><li>Limit and fit analysis including statistical tolerance analysis.</li><li>Finite element analysis tools (e.g., Ansys, Workbench) for elastic and plastic behavior of metals.</li></ul> Proven ability to: <ul><li>Develop and write design objectives and technical product specifications.</li><li>Lead product development from concept to production.</li><li>Provide technical leadership across the full product lifecycle.</li></ul> In-depth knowledge of manufacturing processes: <ul><li>Machining, molding, stamping, plating, assembly.</li><li>Best practices in Design for Manufacturing (DFM).</li><li>Solid understanding of competitive product landscape and intellectual property considerations.</li><li>Fluent in English (verbal and written) to support global communication.</li><li>Comfortable working in a global, cross-functional team and across time zones.</li><li>Strong analytical and problem-solving skills; able to make data-driven decisions with minimal supervision.</li><li>Proficient in MS Office tools: Word, Excel, PowerPoint, Outlook, Teams, etc.</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement.</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time.</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, GD&amp;T, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.</li><li>Leads DV/PV test, responsible for resolving product design and test problems.</li><li>Responsible for FAI review, work with project team to release product in time.</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the pre-production stages of new products.</li></ul> Requirements: <ul><li>Bachelor level degree majored in Engineering, or above;</li><li>More than 5 years mechanical design experience in Automotive industry. Independently new product development experience is plus.</li><li>Knowledge of connector fundamentals, capable of connector component design,&nbsp;</li><li>Familiar with GD&amp;T, mechanics of plastic/metal materials, and basic knowledge in injection molding, stamping.</li><li>Familiar with automotive product development, automotive products development process like APQP and PPAP.</li><li>Skilled in at least one 3D Software: Creo or Pro/E or Catia or UG. Mastery of office software such as Word, Excel, PPT, etc.</li><li>Proficient in writing and reading English. Good Oral English is plus.</li><li>Good communication skills, High team work spirit and team work experience, ability to work with multicultural engineering teams and cross functional environments.</li><li>Effective problem solving skills, to be innovative, willingness/ability to deal with multiple product and assigned tasks.</li></ul>

Responsibilities:&nbsp; <ul><li>Improvement of the injection molding process.&nbsp;</li><li>Improvement and promotion of automation.&nbsp;</li><li>Responsible for the production and maintenance of digital reports, visual kanbans in the injection molding workshop</li><li>Troubleshoot problems, identify root causes, and propose or implement solutions.</li><li>Assist in the implementation of new systems, applications, or technologies.</li></ul> Requirements: <ul><li>Bachelor degree or above, major in automation, machinery or related</li><li>More than 3 years of relevant work experience in precision injection molding/molding/intelligent manufacturing&nbsp;</li><li>Proficient in Power BI, Sailsoft, Excel/PowerǪuery, SǪL applications&nbsp;</li><li>Good reading and writing skills in English&nbsp;</li><li>Experience with injection mold design/process debugging is preferred, as well as the use of Creo, CAD and other software&nbsp;</li></ul>

Responsibilities: <ul><li>Participates in the engineering core team for projects from initial concept to production release in a timely, innovative manner.&nbsp;</li><li>Proficient skills in the drawing and simulation tools ( CAD, Creo, ANSYS,...)to create and optimize design, especially good at structural design and innovation.</li><li>Providing engineering support of cable accessories including Lite and sustaining projects.&nbsp;</li><li>Technical understanding of power system products and related standards</li><li>Interprets related standards, analyzes data, creates test reports, and provides presentations.&nbsp;</li><li>Innovative, computer literate, low to moderate travel, power industry experience or equivalent essential.&nbsp;</li><li>Possess excellent problem-solving skills, be able to work independently, and drive projects to completion. failure analysis and improvement timely.</li><li>Coordinate with other functional and oversea regional teams (including EMEA, US and Asia...)for the technical development in order to achieve targeted cross functional project goals and schedule.</li><li>Daily system management and file management</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Min. bachelor degree in Mechanical Engineering related major. Graduated degree is prefer.</li><li>Good English communication skills, including listening, speaking and writing.&nbsp;</li><li>Experience in power product development at least 5 years, especially cable accessory product development.&nbsp;</li><li>knowledge and experience of materials and production processes used in power products.</li></ul>

Skills

Industry

Location

Jobtitle

20 creo Jobs found

Manufacturing Engineer

Sr. Manufacturing & Process Development Engineer

R&D Product Development Engineer II

Manufacturing Engineer

R&D/Product Dvl Engineer

Solar Design Engineer

Principal R&D/Product Development Engineer (Remote)

R&D Product Development Engineer

124542 Technical Specialist

123457 Senior Mechanical R&D/Product Development Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

20 creo Jobs found

Manufacturing Engineer

Sr. Manufacturing & Process Development Engineer

R&D Product Development Engineer II

Manufacturing Engineer

R&D/Product Dvl Engineer

Solar Design Engineer

Principal R&D/Product Development Engineer (Remote)

R&D Product Development Engineer

124542 Technical Specialist

123457 Senior Mechanical R&D/Product Development Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.