Senior R&D Product Development Engineer (HVAC)

R&D/Product Dvl Engineer

Staff Power Product Development Engineer

Manufacturing and Process Development Engineer

R&D/Product DVL Engineer

Principal R&D/Product Development Engineer (Remote)

Responsibilities: <ul><li>Work within a global multidisciplinary team environment as Product Engineering lead to design and develop functionally robust and cost-effective Connector products / processes to meet customer and market needs</li><li>Deliver regional and global NPD projects which includes activities like Concept generation, Concept validation, tolerance stack analysis, DFMEA, conduct design reviews, basic FEA simulation, Creation of detailed designs and drawings in CREO by applying DFM/DFA principles, creation of product validation / Qualification test plans, perform component fit and function analysis.</li><li>Execute Sustaining activities of legacy products like Customer queries, field failures, address design related manufacturing concerns, BOM &amp; change management in windchill, product improvements, necessary product design documentation/specification updates.</li></ul> Requirements: Knowledge, Skills, Abilities:&nbsp; <ul><li>Expert in design and development of Sheetmetal and Plastic products</li><li>Deep knowledge of associated manufacturing processes (moulding, stamping, plating and Assy)</li><li>Knowledge of materials, finishes and contact physics related to interconnection design</li><li>Knowledge of wire termination techniques (crimping, soldering, welding etc.)</li><li>Experience of testing requirements and techniques for product qualification</li><li>Knowledge of Voice of Customer, Design to Value, Design for Six Sigma.</li><li>General knowledge of industry specifications such as UL, CSA, IEC, and EIA are desirable.</li></ul> Education, Technical Qualification:&nbsp; <ul><li>Bachelor’s degree in Mechanical Engineering/Design</li><li>Min. 9+ years components design related experience</li></ul>

Responsibilities: <ul><li>Technical communication to customer, confirm customer application and technical requirement</li><li>Translate customer’s requirement into engineering specification and provide new product design solution in time</li><li>Responsible for part list/BOM building, 3D models and 2D drawings, product specifications, application specifications, DFMEA, DVPR, SC/CC list etc.&nbsp;</li><li>Lead the design review for compliance with engineering principles, high voltage standards, customer contract requirements, verification and related specifications.</li><li>Lead design review with cross functional teams to confirm the manufacturing and quality control feasibility.&nbsp;&nbsp;</li><li>Leads DV/PV test, responsible for resolving product design and test problems.&nbsp;&nbsp;</li><li>Responsible for FAI review, work with project team to release product in time.&nbsp;</li><li>Interacts with customers, vendors, marketing and sales personnel, and other engineering areas during the preproduction stages of new product</li></ul> Requirements:﻿ <ul><li>Education: Bachelor’s degree or above in Mechanical Engineering or equivalent majors.</li><li>3 years of relevant mechanical engineering work experience with electrical components, Motor vehicle connector design.</li><li>Working knowledge in industry standard (USCAR LV214,LV215，USCAR 2.0 ) and related product application</li><li>Knowledge in relevant mechanical design and development, including but not limited to, resin and metal material selection, fundamentals of statics, DFMEA, product qualification, etc.</li><li>Expert in 3D Design Applications (such as Creo, Spaceclaim, etc.)</li><li>Proficient in geometric dimensioning &amp; tolerancing (GD&amp;T). Proficient at limit and fit analysis including statistical tolerance analysis.</li><li>Proficient in developing and writing design objectives for product specifications</li><li>In depth knowledge in manufacturing process (machining, molding, stamping, plating, assembly, etc.) with experience driving Design for Manufacturing (DFM)</li><li>Fluent in English (both verbal and written) to facilitate global communication both internally and with external customers.</li><li>Ability to work in a global environment – able to accommodate varying time zones and capable of collaborating with individuals across geographies.</li><li>Optimistic when facing difficulties and team work spirit</li></ul>

Responsibilities: <ul><li>Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications.</li><li>Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer.</li><li>Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Develop and manage product documentation, including product requirements, design documents, and test plans/reports.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all technical, quality, and cost objectives.</li><li>Work closely with suppliers to identify and qualify new components and technologies.</li><li>Conduct thorough design verification and validation testing to ensure the product meets the required specifications.</li><li>Collaborate with manufacturing teams to ensure a smooth transition to production.</li><li>Mentor and guide junior engineers and technicians to develop their skills and knowledge.</li><li>Conduct competitive analysis and market research to identify opportunities for innovation and differentiation.</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers’ expectations.</li><li>Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification.</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our Global competency centers to enhance business revenue &amp; growth.</li><li>Apply engineering best practices to reduce cost and sustain existing products to meet customer’s cost targets.</li></ul> Requirements: Preferred Years of Exp viz Minimum Years of Experience: <ul><li>Bachelors or Masters degree in Mechanical or Electrical Engineering.</li><li>Strong understanding of mechanical and electrical engineering principles.</li><li>Experience with product development processes, including design, prototyping, and testing.</li><li>Strong problem-solving skills and ability to work independently or as part of a team.</li></ul> Role Type: Skills: <ul><li>Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related.</li><li>This highly technical position requires an individual who can work independently.</li><li>Experience in product compliance certification ( Product, Safety, Environmental substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM).</li><li>Capability and experience in presentation on products, solutions, and technologies.</li><li>Previous experience in working in high-performing multi-disciplinary global engineering teams.</li></ul>

Responsibilities: <ul><li>Participate in PRD (Product Requirements Document) review as early involvement activity.</li><li>To liaise with sales and product manager on product requirements for sustainability products.</li><li>To liaise with project engineer on manufacturing process for product mechanical design concept.</li><li>Knowledge in product structure, capabilities to create or establish product drawing using Creo 10, generate bill of materials and upload into company system.</li><li>Participate in product DFM review.</li><li>Participate in reviewing DFMEA, PFMEA and product design concept.</li><li>Challenge Product Design for Manufacturability and cost feasibility.</li></ul> Requirements: <ul><li>Bachelor or above degree and engineering background&nbsp;</li><li>3+ yrs. in assembly process development or product design/development experience</li><li>Good teamwork and communication skills&nbsp;</li><li>Skillful in using Creo 10</li><li>Knowledgeable of quality control and quality issue analysis and improvement.</li></ul>

Resonsibilities: <ul><li>Design &amp; Development of automotive products like Connectors, Header, Terminals, Automotive components.&nbsp;</li><li>Interact directly with customers / Sales and Marketing team to identify key Product Technical requirements / deliverables and establish product specifications to fulfil customer requirements in handling new concepts / quotations.</li><li>To lead and drive complex new product development products starting from concepts generation, DFMEA, DFM/DFA, prototyping &amp; testing.</li><li>To generate 3D CAD models &amp; 2D drawings in PTC Creo for Connector.</li><li>Responsible for creating test specifications, deciding test methods, DVP Preparations &amp; testing and validation&nbsp;</li><li>Independently conduct design reviews, ability to check and approve product designs.</li></ul> Requirements: Education: <ul><li>B.E (Mechanical)&nbsp;</li></ul> Critical Experience: <ul><li>Minimum 2 to 9 years of hands-on experience in automotive plastic components development (preferably Connectors)</li><li>Good Experience in Product validation and testing (DV / PV) of automotive products</li><li>Exposure to manufacturing processes like Injection molding, stamping, Manufacturing and assembly etc.</li><li>Exposure to APQP &amp; PPAP activities</li><li>Exposure to Design review processes like DFEMA / DFA / DFM / FEA etc.,</li><li>Exposure to IATF 16949 / TS 16949</li></ul>

Responsibilities: <ul><li>Lead the development of sockets, high-speed connectors, and cable assemblies from market definition to production release.</li><li>Collaborate with cross-functional teams (sales, applications, field engineers, project managers) to translate Voice of Customer (VOC) into technical concepts and specifications.</li><li>Conduct feasibility studies and generate design concepts.</li><li>Perform mechanical and thermal simulations.</li><li>Present design evaluations and proposals to customers.</li><li>Create detailed 2D/3D designs, DFMEA, and tolerance analyses.</li><li>Build and validate prototype samples.</li><li>Finalize product qualification and specifications.</li><li>Provide ongoing technical support to Operations, Quality, and Production teams.</li><li>Manage Engineering Change Notifications (ECN) and Product Change Notifications (PCN).</li><li>Maintain system-level understanding of customer applications and integrate solutions into the design process.</li><li>Drive projects through the LEANPD stage-gate process to ensure timely delivery of high-quality, cost-effective solutions.</li><li>Coordinate with manufacturing, procurement, and external suppliers to align with technical, quality, and cost targets.</li><li>Generate and manage all necessary technical documentation including design drawings, engineering changes, and design history files.</li><li>Support post-launch activities and continuous improvement initiatives.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience.</li><li>10+ years of relevant mechanical engineering experience involving:</li><li>Electrical components and devices.</li><li>Mechanical structure design.</li><li>Manufacturing tooling development (stamping, molding, assembly, plating).</li><li>Manufacturing process development.</li></ul> Strong knowledge in: <ul><li>Socket, connector, and cable assembly design.</li><li>Material selection.</li><li>Tolerance analysis.</li><li>DFMEA.</li><li>Product qualification.</li></ul> Expertise in 3D CAD applications (preferably Creo), including: <ul><li>3D solid modeling (sheet metal).</li><li>2D drawings.</li><li>PDM Link Data Manager.</li><li>General understanding of SpaceClaim, SolidWorks, or other conceptual design tools.</li></ul> Advanced proficiency in: <ul><li>Geometric Dimensioning &amp; Tolerancing (GD&amp;T).</li><li>Limit and fit analysis including statistical tolerance analysis.</li><li>Finite element analysis tools (e.g., Ansys, Workbench) for elastic and plastic behavior of metals.</li></ul> Proven ability to: <ul><li>Develop and write design objectives and technical product specifications.</li><li>Lead product development from concept to production.</li><li>Provide technical leadership across the full product lifecycle.</li></ul> In-depth knowledge of manufacturing processes: <ul><li>Machining, molding, stamping, plating, assembly.</li><li>Best practices in Design for Manufacturing (DFM).</li><li>Solid understanding of competitive product landscape and intellectual property considerations.</li><li>Fluent in English (verbal and written) to support global communication.</li><li>Comfortable working in a global, cross-functional team and across time zones.</li><li>Strong analytical and problem-solving skills; able to make data-driven decisions with minimal supervision.</li><li>Proficient in MS Office tools: Word, Excel, PowerPoint, Outlook, Teams, etc.</li></ul>

Skills

Industry

Location

Jobtitle

6 dfmea Jobs found

Senior R&D Product Development Engineer (HVAC)

R&D/Product Dvl Engineer

Staff Power Product Development Engineer

Manufacturing and Process Development Engineer

R&D/Product DVL Engineer

Principal R&D/Product Development Engineer (Remote)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

6 dfmea Jobs found

Senior R&D Product Development Engineer (HVAC)

R&D/Product Dvl Engineer

Staff Power Product Development Engineer

Manufacturing and Process Development Engineer

R&D/Product DVL Engineer

Principal R&D/Product Development Engineer (Remote)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.