Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Supervisor II Assembly

CEO Executive Assistant

Reference Standard Coordinator

Business Manager North East

Regional Sales Manager - North Africa

Desktop Support Engineer

Field Service Engineer

Job Overview: <ul><li>The Research Associate – II – Nitrosamines is responsible for conducting analytical research, method development, and risk assessment activities focused on nitrosamine impurities in pharmaceutical products.&nbsp;</li><li>The role supports regulatory compliance, safety assessment, and mitigation strategies in line with global regulatory requirements (such as those from the FDA, EMA, WHO, and ICH M7). This position requires a strong understanding of organic chemistry, analytical instrumentation, and impurity profiling.</li></ul> Responsibilities: <ul><li>Development, validation, and transfer of LC/MS methods for quantitative determination of Nitrosamine impurities (Small Molecules and NDSRIs) at ppm to sub-ppb levels</li><li>Design and execution of experiments to identify root causes of Nitrosamine formation and develop mitigation strategies</li><li>Perform chemical extractions of container closure systems and drug product solutions</li><li>Utilize advanced mass spectrometry techniques (LC-MS and GC-MS) for identification and quantification of Nitrosamines</li><li>Prepare technical reports and support documentation for regulatory filings</li><li>Collaborate with subject matter experts, supervisors, and cross-functional teams</li><li>Interpret analytical data, evaluate results, and incorporate findings into project goals</li><li>Maintain compliance with relevant Quality System Regulations and GxP standards</li></ul> Requirements: <ul><li>Experience: 6–10 years in analytical chemistry focused on Nitrosamines</li><li>Education: Master’s degree or equivalent experience; PhD preferred with relevant experience</li><li>Skills Required:</li><li>Proficiency in LCMS/GCMS instrumentation and troubleshooting</li><li>Strong knowledge of Nitrosamine chemistry and analytical techniques</li><li>Experience in method development, validation, and regulatory reporting</li><li>Ability to analyze complex data and draw meaningful conclusions</li><li>Good documentation and technical report writing skills</li></ul>

Role Description: <ul><li>The Manager –ADL, GM P is responsible for leading analytical development activities within a GMP-regulated environment, ensuring robust method development, validation, and transfer for pharmaceutical products.</li><li>This role plays a critical part in supporting product development, regulatory submissions, and commercial manufacturing by providing accurate and compliant analytical data.</li></ul> Responsibilities <ul><li>Lead and manage a team involved in method validation, method transfer, and postproduction studies (Freeze Thaw analysis, Photostability studies, Dilution studies, RLD Characterization, etc.) for 505b(2) and generic ANDAs.</li><li>Troubleshoot and resolve challenges during method validation and method transfer of new products from R&amp;D to manufacturing sites.</li><li>Support regulatory filings and respond to analytical function queries.</li><li>Ensure compliance with cGLP within the ADL GMP function.</li><li>Provide support during quality inspections by regulatory agencies at manufacturing plants.</li><li>Timely closure of LIR, NCR, CCN, CAPA and ensure implementation of corrective and preventive actions.</li><li>Ensure timely compliance with Pharmacopoeia updates.</li><li>Mentor, coach, and develop team members for task execution and personal growth.</li><li>Collaborate with external partners (CRO/CMO) for analytical testing execution.</li><li>Work cross-functionally with project management, regulatory affairs, formulation development, manufacturing, and quality control teams.</li></ul> Requirements: <ul><li>Education: Ph.D. OR MPharm.</li><li>Experience: 3–4 years of team handling experience.</li></ul> Skills Required: <ul><li>Strong knowledge of analytical method validation, method transfer, Pharmacopoeia compliance, cGLP, and documentation practices.</li><li>Sound understanding of analytical techniques with good learning agility.</li><li>Excellent technical writing and computer skills for data recording, protocol/report generation, and presentations.</li><li>Strong coordination, relationship management, and ability to work in multicultural teams.</li><li>Effective communication and team management skills.</li><li>Knowledge of latest quality and regulatory requirements.</li><li>Ability to delegate effectively and take autonomous decisions.</li><li>Critical thinking skills for problem-solving and decision making.</li></ul>

Job Description: <ul><li>The role of a Manager – R&amp;D (Research &amp; Development) F&amp;D (Food &amp; Drink) Emulsions typically involves overseeing the research, development, and innovation of emulsions used in the food and beverage industry.&nbsp;</li><li>The manager leads the R&amp;D team to develop new emulsion-based products or improve existing ones to meet customer requirements, industry standards, and market demands.</li></ul> Responsibilities: Planning of Project technical feasibility experiment: <ul><li>End to end planning for Resource availability on time Planning of developmental trials, PDR studies/QBD additional studies for ANDA products</li><li>Planning of developmental trials, PDR studies/QBD additional studies for ANDA products.</li><li>Monitoring of development trials.</li><li>Compilation of the development data.</li><li>Ensuring development as per QBD approach</li><li>Review the technical documents e.g. DMBD, PDR and other protocols &amp; reports.</li><li>Coordination with CFTs (ADL, IRA, Procurement, Quality) for on time project execution.</li><li>Technology transfer of Drug product [ANDA, 505 (b)(2), Complex injectables]</li><li>Exhibit batch execution [ANDA, 505 (b)(2), Complex injectables]</li><li>Support for Process validation and commercial batches [ANDA, 505 (b)(2), Complex injectables]</li><li>Technology transfer documents review Products developed by CRO as per regulatory requirement.</li><li>Support &amp; coordination with CMOs for successful technology transfer</li><li>Fulfilling the regulatory requirements by designing the trials</li><li>Training &amp; knowledge enhancement of the team</li><li>Design &amp; Authorization of SOPs</li><li>Execution &amp; approval process of New Equipments/Instruments for projects in upcoming portfolio &amp; continuous improvement of Development Lab.</li><li>Adoption of GQP (Procedures integration with systems)</li></ul> Requirements: <ul><li>3–4 years of team handling experience</li><li>3–4 years of hands-on work in emulsions (oil-based and water-based)</li><li>Full product lifecycle exposure: development → scale-up → filing</li><li>Minimum 5–10 regulatory filings (e.g., ANDA, NDA)</li><li>Strong people management and leadership capabilities</li><li>Preferred experience in ophthalmic formulations</li><li>Background in injectable manufacturing environment is an added plus</li></ul>

Responsibilities: <ul><li>To Plan and establish production work schedule to meet delivery times and best utilize company production capacity by releasing work orders.</li><li>Scheduling for materials and production in Coordination with staff throughout the company to ensure timely delivery to customers by obtaining agreement for product ship dates.</li><li>To take full responsibility of the shift in terms of management of staff, management of production and quality targets and to ensure the smooth running of the production processes, produced within the shift in line with the company’s quality systems, processes and procedures.</li><li>To demonstrate excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered during the shift in line with the companies Health and Safety policy.</li><li>Confer with other supervisors and managers to coordinate operations and activities within or between departments.</li><li>Monitor, measure, and report on production related process performance/KPI’s, general issues and ensure the team is self-managed (SMT) on problem solving and troubling shooting skills to identify root causes and take fast effective action to resolve the problems in hand.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer centric approach and adherence to customer expectations to promote a positive company image.</li><li>Responsible for on-the-job training of directs. Play active role in the TEOA plan/Kaizen initiative to achieve plans for future growth within the company.</li><li>Set departmental process and link to ISO procedure.</li><li>Stake holder Management</li></ul> Requirements:&nbsp; Professional Experience <ul><li>5 to 7 Years of experience in the same field and industry.</li><li>Bachelor’s degree in mechanical or Electronics Engineering</li><li>Advanced skills with Microsoft Office, especially Excel</li></ul>&nbsp;Leadership Experience: <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul>&nbsp;Project Experience: <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Play an active role in the TEOA plan/Kaizen initiative to achieve plans for future growth within the company.</li></ul>&nbsp;Qualifications: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer</li></ul>&nbsp;Other Requirements: <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.</li></ul>

Responsibilities: <ul><li>Manage CEO’s calendar, travel plans, agendas, and correspondence, including confidential materials.</li><li>Serve as the primary liaison between the CEO, board members, senior management, and external stakeholders.</li><li>Organize and prioritize requests, provide recommendations, and make decisions aligned with the CEO’s style and organizational policies.</li><li>Oversee special projects, ensuring seamless execution and effective communication.</li><li>Draft correspondence, acknowledgment letters, and materials to support CEO operations.</li><li>Maintain CEO profile and represent the CEO in internal and external communications.</li><li>Assist with hospitality and logistical arrangements for board members and guests.</li><li>Track project progress, customer satisfaction, and risk mitigation strategies.</li></ul> Requirements: <ul><li>Bachelor’s degree or equivalent experience.</li><li>5–10 years supporting C-level executives.</li><li>Expert proficiency in Microsoft Office and desktop publishing software.</li><li>Strong organizational, time-management, written, and verbal communication skills.</li><li>Ability to manage competing priorities independently, maintain discretion, and work professionally with diverse stakeholders.</li></ul>

Responsibilities: Sample Management <ul><li>Performs QC reference standard/chromatographic column receipt, processing, distribution for testing and storage.</li><li>Performs QC reference standard reconciliation and disposal.</li><li>Tracks inventory of reference standards in the lab.</li><li>Uses laboratory software for reference standard, chromatographic column management.</li><li>Verifies accuracy of labeling/documentation provided with reference standards.</li><li>Informs QC Coordinator if chemical or reference standard is expired for removal from laboratory area.</li><li>Coordinates, with lab management, in-house qualification of reference standards. Submit samples to the appropriate lab groups for testing.</li><li>Create and maintain reports including quality data trending, informational spreadsheets, laboratory log spreadsheets.</li><li>Compile a list of necessary laboratory supplies specifically reference standards, contacting vendors to obtain quotes.</li><li>Uses the purchasing system to procure reference standards and laboratory supplies.</li><li>Provide status updates to QC management and other departments regarding the status of reference standard inventory.</li><li>Maintain a safe work environment by following standards and procedures and complying with legal regulations.</li></ul> Lab Equipment <ul><li>Maintains, operates equipment and instruments supporting reference standard processing.</li><li>Provides general laboratory support such as routine instrument cleaning/preventative. maintenance, reference standard/sample receiving, chemical inventory, document filing and housekeeping.</li><li>Works with internal resources to maintain lab in an optimal state. Cleans lab working surfaces and disposes of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.</li><li>Under close supervision, learns to troubleshoot basic instrument problems.</li></ul> Investigations <ul><li>Escalates any trends/events to the QC Lab Manager.</li><li>Escalates any reference standard documentation issues to the QC Lab Manager.</li><li>With guidance, participates in OOS/OOT/NOE and other investigations.</li><li>Assists, as and when needed, scientists working in the laboratory.</li><li>May assist in drafting, editing, and reviewing SOPs.</li></ul> Training <ul><li>Maintains assigned training records current and in-compliance.</li><li>May assist in the training of laboratory staff.</li></ul> Compliance <ul><li>Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting.</li><li>Documents accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.</li><li>Follows internal processes related to controlled substances.	continuous.</li></ul> Safety <ul><li>Follows EH&amp;S procedures to ensure a safe work environment.</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS.</li></ul> Requirements: Education &amp; Experience <ul><li>College graduate, preferably in a Science related field.</li><li>Laboratory experience related to sample management preferred.</li></ul> Knowledge <ul><li>Basic knowledge of reference standard/sample management in a laboratory environment.</li><li>Some knowledge of applicable safety and standards guidelines: SOP, cGMP, GLP, DEA regulations and/or MSDS.</li><li>Competency in Microsoft Office Suite.</li><li>Proficiency with computers.</li></ul> Skills &amp; Abilities <ul><li>Ability to display and analyze data in a logical manner.</li><li>Good verbal and written communication skills as well as good computer skills.</li><li>Attention to details and accurate record keeping.</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills.</li><li>Ability to take initiative, set priorities and follow through on assignments.</li></ul> Physical Requirements	 <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel. Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals.</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision.</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.</li></ul>

Responsibilities: Dealer Relationship Management: <ul><li class="ql-indent-1">Build and maintain strong relationships with assigned dealers to drive revenue, volume, market share, and profitability.</li><li class="ql-indent-1">Communicate weekly with dealers and visit each dealer location at least once per month.</li><li class="ql-indent-1">Evaluate dealer sales performance and market share; recommend and implement corrective actions where needed.</li></ul> Sales Planning &amp; Execution: <ul><li class="ql-indent-1">Plan and forecast billing, retail orders, and ensure achievement of monthly, quarterly, and annual sales targets.</li><li class="ql-indent-1">Prospect and onboard new dealerships following established new dealer guidelines.</li><li class="ql-indent-1">Assist new dealers with merchandising programs, ordering processes, and dealership branding.</li></ul> Events &amp; Promotions: <ul><li class="ql-indent-1">Plan, participate, and support special events such as rodeos, corporate and dealer farm shows, and sporting events within the territory.</li><li class="ql-indent-1">Organize and conduct regional dealer meetings as required.</li></ul> Training &amp; Support: <ul><li class="ql-indent-1">Coordinate and deliver training for new dealers covering computer systems, sales processes, marketing programs, product knowledge, advertising, parts, and service.</li><li class="ql-indent-1">Collaborate with the Service Manager to facilitate product and sales training.</li></ul> Market Intelligence &amp; Product Feedback: <ul><li class="ql-indent-1">Conduct competitive intelligence and product-price positioning analyses to maintain a competitive advantage.</li><li class="ql-indent-1">Test and evaluate new products, recommend improvements, and suggest new product additions.</li></ul> Logistics &amp; Coordination: <ul><li class="ql-indent-1">Assist with the logistics of tractors/equipment for photo shoots, events, and other requirements within the territory.</li></ul> Requirements: Education &amp; Experience: <ul><li>Bachelor’s degree or minimum 5+ years of field sales/channel management experience in the construction, industrial, or agricultural equipment industry.</li><li>In-depth knowledge of product categories, dealership operations, and assigned territory.</li></ul> Skills &amp; Competencies: <ul><li>Strong ability to work independently with minimal supervision.</li><li>Excellent communication skills for interaction with dealers, vendors, employees, and all levels of management.</li><li>Proven ability to meet sales targets and deliver business growth.</li><li>Strong customer service orientation and problem-solving skills.</li><li>Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook) and Internet tools.</li><li>Strong presentation skills for small and large group settings.</li><li>Ability to work collaboratively in a team environment.</li></ul> Other Requirements: <ul><li>Valid driver’s license with a clean driving record.</li><li>Willingness to travel 50–75% of the time.</li><li>Ability to lift 50 lbs unassisted.</li><li>Physical capability to sit, stand, walk, climb, balance, kneel, crouch, or crawl as required by the role.</li></ul>

Responsibilities: Market and customer development assessment <ul><li>Provide market, regulatory, customer and competition landscape: outlook, insights and 5 years forecast&nbsp;</li><li>Conduct research of cigarettes manufacturers in Africa and intelligence on manufacturing production volume and consumptions</li><li>Conduct research of customer products, key buying factors and next best alternatives</li><li>Insights and updates on Sanctions, Regulatory, government intervention e.g. taxation, bans [Content and what it means to Our client]&nbsp;</li><li>Consumer and product research: Conventional cigarettes type [format, brand board, types of tobacco, exports and imports distribution channels]&nbsp;</li><li>Consumer and product research: Reduced Risk Product (RRP) / Next Generation Product (NGP) cigarettes type [format, brand board, types of tobacco, exports and imports distribution channels]&nbsp;</li><li>SWOT analysis</li><li>Sourcing needs: what are the roadblocks and what is require?&nbsp;</li><li>Appetite for new product launches.</li><li>How does the deal work for IMB, BAT who sold their business but has opportunity to reengage after 2/3 years?</li><li>Secure meetings for Our client with targeted customers including Top to Top meeting</li><li>Assess opportunity to work with traders&nbsp;</li><li>Market trend analysis and competitor activity in region</li><li>Effective market and customer reporting</li></ul> Customer Management&nbsp; <ul><li>Comprehensive understanding of customers’ market dynamics, segments and trends</li><li>Co-ordination of sales activity to maximise sales opportunities</li><li>Maintain relationships with customers, prospects and participate in key customer meetings</li><li>Develop support tools and support cross functional to provide customer ease of working&nbsp;</li><li>Customer Strategy, Plan and implementation&nbsp;</li><li>Sustainable customer lifetime growth</li><li>Prepare sales contracts ensuring adherence to law-established rules and guidelines</li><li>Effective and relevant customer meetings</li><li>Annual customer relationship contact plan</li><li>Effective delegation of activity within team</li><li>Cross functional team mapping [between customers and Our client team] and secure cross business engagement</li><li>Ensure thorough and disciplined use of key tools aligned with Our client Ruby framework</li><li>Monthly Performance Dashboard to track progress, with year-end projections and SMART action plans in Opportunity Pipeline Tracker</li><li>Continuous Review of customer performance versus the annual plan and budget with creation of action plans to address under performance</li></ul> Sales Planning and Development&nbsp; <ul><li>Promote Our client value proposition and market presence</li><li>Promote and sell Our client solutions by establishing key contacts and developing relationships with target customers</li><li>Generate new enquiries from existing customers, prospecting of new customers within Africa&nbsp;</li><li>Identify and create new opportunities to deliver growth in revenue and profitability&nbsp;</li><li>Management of sales pipeline through Opportunity Pipeline Tracker</li><li>Create and implement Africa’s 5 years strategy plan</li><li>Delivery of market segmentation matrix</li><li>Longer term product lifecycle considerations [Dual sourcing strategy for existing SKUs, and in-house avoidance]&nbsp;</li><li>Ensure thorough and disciplined use of Opportunity Pipeline Tracker</li><li>Our client solutions [Scientific services included] mapping across customers and market&nbsp;</li><li>Secure innovation session with brand owners and decision makers</li><li>Market trend analysis and competitor activity in region</li><li>Longer term product lifecycle considerations</li><li>Effective market and customer reporting</li><li>Monthly Performance Tracker to track progress</li><li>Accurate forecasting and Monthly reporting&nbsp;</li><li>Tracking performance through Salesforce.com</li></ul> Requirements: <ul><li>Bachelor’s degree in business or equivalent discipline</li><li>At least 10 years of sales and account management experience with a minimum of 5 years prior experience in the tobacco industry (must have)</li><li>Fluent in English (both written and spoken) and nice to have local African languages</li><li>Excellent coordination and communication skills to address internal and external teams</li><li>Ability to travel frequently internationally to meet partners and customers</li><li>Excellent analytical skills; Energetic self-starter possessing self-confidence and maturity&nbsp;</li><li>Very good presentation skills and attention to detail&nbsp;</li><li>Passion for sales and business growth&nbsp;</li><li>Project management skills</li><li>Highly self-motivated, ambitious, resourceful and driven</li><li>Excellent leadership, influencing and listening skills</li><li class="ql-align-justify">Good understanding of business processes, including sales, supply chain and customer service</li></ul>

Responsibilities: <ul><li>Performed Desktop Support services to users&nbsp;</li><li>This includes receiving, prioritizing, documenting and actively resolving end user help requests and escalating incidents when necessary to maintain customer satisfaction and SLA expectations.</li><li>Perform imaging/re-imaging&nbsp;</li><li>Perform asset inventories</li><li>Perform technical escalation to 3rd party vendor or resolver groups (where appropriate)</li><li>Updates Incident records</li><li>Creates and updates work instructions</li><li>Document standards and procedures </li></ul> Requirements: <ul><li>Min. ITE/Diploma graduate with 1 year experience in desktop support</li><li>Min 1 year experience in Microsoft Windows 10 and Microsoft Office 365</li><li>Clear Spoken &amp; Written English and Chinese.</li></ul> possess at least one (1) of the following certifications or their equivalent:&nbsp;<ul><li>CompTIA A+;</li><li>CompTIA Security+;</li><li>CompTIA Network+;</li><li>Microsoft Certified: Windows Client; and</li><li>Microsoft Certified: Managing Modern Desktops.</li><li>Previous IT helpdesk and/or call centre support experience, including providing remote support via the telephone or using remote tool will be added advantages</li><li>Demonstrate knowledge in the support of workstations, and related components</li><li>Good verbal and written communication skills</li><li>Good coordination skills&nbsp;</li><li>Ability to prioritize effectively and work with a sense of urgency</li><li>Effectively communicates with teammates and managers</li></ul>

Responsibilities: <ul><li>Work independently on our client vacuum valves installation, troubleshooting, problem solving, maintenance and repairing on site/internal workshop.</li><li>Responds to customer calls; analyzes, and troubleshoots problems via phone, remote session or at customer site.&nbsp;&nbsp;</li><li>On time and correctly report working activities and time duration with customer signature.</li><li>Keep good communication with customers at various levels (tool engineers, section managers etc.)</li><li>Liaise with customers and internal stakeholders relating to technical and service issues.</li><li>Conducting customer support meetings and ensuring regular communication with customers.</li><li>Follow up and feedback customer complaints.</li><li>Follow up customer open issues until it closed.</li><li>Response for our client quality information collection and quality problem report.</li><li>Provide technical problem solving and roots cause analysis report.</li><li>Ability to support customer for urgent request in weekend and holiday.&nbsp;&nbsp;&nbsp;</li><li>Assessing customers’ needs and advice the customers with regards to spare parts, preventive maintenance and retrofit possibilities.</li><li>Special projects and other duties as assigned.&nbsp;&nbsp;&nbsp;</li></ul> Requirements: <ul><li>Mechanical or electronic background with college degree or above.</li><li>Minimum 3 years of service experience in Cleanroom environment (Semiconductor or vacuum industry is preferred).</li><li>Strong skill of diagnosing, repairing and troubleshooting.</li><li>Strong business acumen and ability to identify opportunities within problems.</li><li>Be able to work independently under pressure and irregular hours.</li><li>Personal accountability, team player.</li><li>Good communication and interpersonal skill.</li><li>Goal achievement.</li><li>Willing and able to travel frequently within short notice. Be adapted to irregular over time work together with customer urgent need.</li><li>Able and comfortable to communicate in English, Chinese. And 1 other additional language is a plus. (Japanese or Korean).</li></ul>

Skills

Industry

Location

Jobtitle

94 good coordination Jobs found

Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Supervisor II Assembly

CEO Executive Assistant

Reference Standard Coordinator

Business Manager North East

Regional Sales Manager - North Africa

Desktop Support Engineer

Field Service Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

94 good coordination Jobs found

Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Supervisor II Assembly

CEO Executive Assistant

Reference Standard Coordinator

Business Manager North East

Regional Sales Manager - North Africa

Desktop Support Engineer

Field Service Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.