Manager, Operations

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Manufacturing and Process Development Engineer

Cost Accountant

Inventory Analyst

Materials Planning Supervisor

Test engineer

Category Manager

Role Description:&nbsp; <ul><li>The purpose of this job is to oversee the production schedules in accordance with approved production instructions, standard operating procedures, while utilizing cGMP for the preparation of commercial product.</li><li>Monitor and document in a periodic performance review the performance of the production staff. Identify opportunities for process and equipment improvements.</li><li>Mentor staff and set goals and objectives for the production personnel.</li></ul> Responsibilities: <ul><li>Manufacturing Operations Management</li><li>Assure the accurate execution of cGMP/DEA documentation relative to manufacturing and packaging activities.</li><li>Assure the accurate manufacturing of bulk drug product for delivery to primary packaging without deviation.</li><li>Assure the accurate packaging of drug product in approved primary packaging components without deviation</li><li>Assure the accurate sampling of raw material and the packaging of samples for shipment as appropriate to contract testing laboratories.</li><li>Assure the accurate assessment of component inventory and reconciliation.</li><li>Assure staff training requirements are established and complete prior to the performance of process or procedure.</li><li>Assure the accurate performance of basic routine preventive maintenance of equipment and facility cleaning activities by operators.</li><li>Establish performance Goals and Objectives based on facility needs and High Corporate Standards.</li><li>Complete routine performance evaluations of staff, and recommend growth opportunities.</li><li>Assure adherence to established production schedules and monitor production performance as determined by the Plant Director.</li><li>Monitor the general safety of staff and assure safe work practices are followed by all site personnel.</li></ul> Requirements: Education &amp; Experience <ul><li>Undergraduate Degree in Pharmacy, Engineering, or equivalent in training and experience.</li><li>10 years’ experience in a pharmaceutical manufacturing environment.</li><li>Prior cGMP experience in a pharmaceutical production environment is necessary. 3-5 years’ previous supervisory experience required.</li><li>Proficiency in a body of information required for the job e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc.</li></ul> Knowledge&nbsp; <ul><li>Knowledge of workplace health and safety requirements for applicable hazardous substances.</li><li>Must be able to demonstrate a high degree of understanding in the cGMP practices.</li><li>Must be able to demonstrate a high degree of understanding in the controlled drug substance regulations.</li><li>Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc.</li></ul> Skills &amp; Abilities <ul><li>Demonstrate knowledge of the current good manufacturing practices.</li><li>Ability to convey information clearly and concisely to both individuals and groups.</li><li>Ability to troubleshoot manufacturing processes, write investigations and complete documentation.</li><li>Ensure adequate staffing and efficient workflow and provide reports and data on manufacturing activity.</li></ul> Physical Requirements	 <ul><li>This position requires working with or around hazardous substances, and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees.</li><li>Ability to don personal protective equipment, if necessary. Able to walk the production floor.</li><li>This position requires working with or around hazardous substances, and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees.</li><li>Ability to don personal protective equipment, if necessary.</li><li>Able to walk the production floor.</li></ul>

Responsibilities: olicies And Procedures, Quality System: <ul><li>Implement quality policies, procedures and systems; maintain/update quality engineering work instruction in order to ensure the business procedures in line with QS and global standards.</li><li>Involve in customer audit, implement responsible procedures and facilitate other departments to close their actions on time and fulfil requirement to our products and process in order to meet customer requirement and our quality system"</li></ul> Incoming Materials Quality Issue Handling: <ul><li>Analyze and identify material issues found in production line, drive SQE for supplier improvement in order to maintain incoming material quality."&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul> Process Quality Issues Handling: <ul><li>Handle quality issues occurred in process in order to improve and maintain product quality performance, perform risk assessment to take proper disposition, develop improvement action to prevent the occurrence.</li><li>Drive improvement for nonconformance detected by QC.</li><li>Lead team to develop error-proof and mistake proof solution for quality risk identified. In order to achieve good quality performance of product.</li></ul> Customer Complaints/Feedback Handling: <ul><li>Handle customers complaints including develop and implement customer complaints corrective and preventive action plan in order to maintain the relationship with customers and provide extraordinary customer experience to customer.</li></ul> Quality documents and criteria setting: <ul><li>Develop quality engineering documents (QIP,WI,VA), set up and develop quality inspection criteria, prepare COC format in order to maintain product quality performance.</li></ul> Quality Improvement: <ul><li>Develop and track assigned process quality improvement plan according to product quality performance and implement situation in order to improve and maintain product quality performance. Using the DMAIC method to drive the improvement.</li><li>Work with team to qualify the process change/new line qualification/new machine, foresee quality risk and advise robust tooling/process design, identify the risk/gap and drive proper improvement action, follow up until action closed in order to improve and maintain product quality performance.</li></ul> Scrap control and improvement: <ul><li>Review and approve WIP scrap application</li><li>Monitor WIP scrap and take proper countermeasures</li><li>Follow up top failures in process, identify root cause and major contributor, drive team to take solid improvement action to improve</li><li>Validate the improvement action and follow up the result</li><li>in order to maintain product quality performance&nbsp;</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>College diploma major in engineering</li><li>3 years electronics industry quality related working experience, 1 year SMT experience is preferred.</li><li>Green belt/Black belt certification is preferred, can lead the team to do the DOE/GR&amp;R and data analysis ability.</li><li>Familiar with manufacturing process of cable assembly, such as terminal and IDC crimping, soldering, electrical testing, signal integrity etc.</li><li>Familiar with electrical industry specification such as IPC620, IPC610 etc.&nbsp;&nbsp;</li></ul>

Role Description:&nbsp; <ul><li>As a Wire/Cable Senior R&amp;D/Product Development Engineer at our clienty, you will work in a dynamic, diverse environment focusing on the development and qualification of high-speed bulk cable products.</li><li>This role supports the full product lifecycle—from concept and design through testing, production, and release—while collaborating across engineering, manufacturing, and customer teams.</li></ul> Responsibilities:&nbsp; <ul><li>Lead the design, specification, and documentation of bulk cable Signal Integrity (SI) and physical testing interfaces for high-speed bulk cable applications.</li><li>Interact with Cable Assembly SI teams to correlate bulk cable data with cable assembly SI/physical test results.</li><li>Collaborate with customers and end-users to understand use case requirements and establish test specifications aligned with industry standards.</li><li>Work with internal and external vendors to design and implement test equipment and fixtures.</li><li>Develop, document, and maintain bulk cable SI/physical test protocols.</li><li>Train bulk cable test personnel across all our client DDN bulk cable locations on the use of testing fixtures and procedures.</li><li>Deliver technical presentations to both internal teams and external customers as needed.</li><li>Support and participate in company safety (SAFE) and ISO compliance activities.</li><li>Provide technical support for maintenance and calibration of bulk cable test equipment.</li><li>Contribute to cross-functional projects and initiatives supporting business objectives.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of circuit analysis&nbsp;</li><li>Experience with reliability testing and engineering.</li><li>Proficient in using Network Analyzers and working with S-Parameters.</li></ul>

Responsibilities:&nbsp; <ul><li>Lead process development, implementation, and documentation for bulk cable manufacturing.</li><li>Support product/process validation and transfer activities.</li><li>Assist with product qualification, working closely with engineering and test lab teams.</li><li>Partner with Product Development/Design Engineering to ensure manufacturability.</li><li>Interact with test laboratories on process/product qualification tasks, including DOE, PFMEA, 8D investigations, and Failure Analysis (FA).</li><li>Support tooling specification and design for manufacturing processes.</li><li>Provide engineering support to additional manufacturing sites as required.</li><li>Collaborate with suppliers to ensure process compliance and capability.</li><li>Support SAFE (Safety Activities For Employees) and ISO quality compliance initiatives.</li><li>Provide technical support for manufacturing maintenance activities.</li><li>Participate in cross-functional projects that support business growth and continuous improvement.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of materials, processes, and systems used in wire and cable manufacturing.</li><li>Proficient in CAD software for tooling and process design.</li><li>Practical knowledge and experience with SPC (Statistical Process Control), Six Sigma, and Lean Manufacturing principles.</li><li>Ability to manage multiple projects and deliver results under tight timelines.</li><li>Willingness to travel internationally up to 30% as required.</li></ul>

Responsibilities: <ul><li>Participate in PRD (Product Requirements Document) review as early involvement activity.</li><li>To liaise with sales and product manager on product requirements for sustainability products.</li><li>To liaise with project engineer on manufacturing process for product mechanical design concept.</li><li>Knowledge in product structure, capabilities to create or establish product drawing using Creo 10, generate bill of materials and upload into company system.</li><li>Participate in product DFM review.</li><li>Participate in reviewing DFMEA, PFMEA and product design concept.</li><li>Challenge Product Design for Manufacturability and cost feasibility.</li></ul> Requirements: <ul><li>Bachelor or above degree and engineering background&nbsp;</li><li>3+ yrs. in assembly process development or product design/development experience</li><li>Good teamwork and communication skills&nbsp;</li><li>Skillful in using Creo 10</li><li>Knowledgeable of quality control and quality issue analysis and improvement.</li></ul>

Responsibilities: <ul><li>Lead the plant’s cost accounting function, including design and implementation of robust cost control systems.</li><li>Develop and manage detailed product costing, activity-based costing models, and process-wise profitability analysis.</li><li>Provide deep insights on cost trends, production efficiency, and inventory usage to support strategic decision-making.</li><li>Analyze standard vs actual costs and proactively address variances through root cause investigation and corrective actions.</li><li>Conduct plant-wide cost audits and coordinate with production, procurement, and supply chain teams for financial alignment.</li><li>Drive initiatives in waste reduction, process improvement, and cost optimization at both micro and macro levels.</li><li>Oversee inventory valuation, stock audits, and reconciliation of raw materials, WIP, and finished goods.</li><li>Collaborate with the Finance Head and Plant Director for capital expenditure planning and cost-benefit analysis.</li><li>Ensure compliance with Cost Accounting Standards, internal controls, and regulatory reporting requirements.</li><li>Prepare high-level MIS reports, dashboards, and executive summaries for senior management and board-level reviews.</li></ul> Requirements:﻿﻿<ul><li>CMA (Cost &amp; Management Accountant) qualified; additional MBA in Finance or CA Inter is an advantage.</li><li>8-10 years of progressive experience in cost accounting, with at least 3 years in a senior role in a manufacturing plant.</li><li>Proven track record in implementing cost optimization strategies and improving profitability.</li><li>Strong command of ERP systems (e.g., SAP, Oracle) and advanced Excel/Power BI for analytics.</li><li>In-depth understanding of cost structures, production processes, and inventory management in industrial environments.</li><li>Excellent communication, leadership, and cross-functional collaboration skills.</li></ul>

Responsibilities: <ul><li>Recommend and Deploy System Solutions to improve Supply Chain Systems and resolve process issues</li><li>Conduct Business Process Reviews, identifying SAP Business Process Gaps and Deploying Best Demonstrated SAP Business Processes, maintaining consistency across SENSORS sites</li><li>Improve SAP proficiency and process knowledge across SENSORS Supply Chain Organization</li><li>Create and Maintain Training Material and Knowledge Content</li><li>Develop and Train all Supply Chain Key User Community</li><li>Develop Business Requirements Documents and Identify ROI for Systems Enhancements</li><li>Perform User Acceptance Testing and Deployment of Latest SAP Enhancements</li><li>Promote, Maintain, Enforce Master Data Integrity and Governance.</li><li>Troubleshoot, Identify, and Resolve SAP Issues as liaison to the whole Supply Chain Organization and company Information Systems.</li></ul> Requirements: <ul><li>Bachelor’s degree in Supply Chain, Industrial Engineering, Information Systems or similar&nbsp;</li><li>Working knowledge of Supply Chain processes, Materials Resource Planning Systems, Engineering Master Data including BOMs, Routes, Material Masters, Info Records, Source Lists.</li><li>Minimum of 5 years experience in Supply Chain/Logistics, Procurement or Industrial Engineering, including detailed knowledge of SAP processes and capabilities within SAP PUR/MM/MDG/ modules</li><li>Training expertise for both classroom and one on one training situations</li><li>Excellent project manager with very good organizational capabilities</li><li>Solid influencing skills, particularly where there is no reporting relationship</li><li>Problem/root cause identification and communication skills</li><li>Excellent team building skills and ability to motivate and persuade associates from the plant floor level through management. “Getting things done through other people”</li><li>Ability to translate Business needs into Business Requirements Documents</li><li>Ability to effectively conduct requirements gathering sessions and concisely documenting the outcome&nbsp;</li><li>Travel domestically &amp; internationally as needed (10-20%)</li></ul>

Responsibilities: <ul><li>Manage the organizations inventory levels in the region from both value and coverage (Days on Hand - DoH) perspectives.</li><li>Oversee the management of imported components with the team.</li><li>Define inventory strategies aligned with the organization’s objectives.</li><li>Monitor the weekly forecast, quarterly inventory closing for the region, and allocation by stock type (finished goods, purchased, manufactured, in transit, etc.)</li><li>Monitor and define actions for the elimination of obsolete inventory.</li><li>Support monthly S&amp;OP cycles, actively participating in all phases.</li><li>Support planning activities for new projects (new sales and/or locations) and end-of-life projects.</li><li>Monitor supplier delivery performance and collaborate with the Procurement team regarding underperforming suppliers.</li><li>Periodically review SKU consumption profiles with the team and adjust replenishment policies when necessary.</li><li>Support planners in cases of delivery and/or production delays.</li><li>Manage special freight requests, assess root causes, and support actions to prevent recurrence.</li><li>Ensure strong integration and collaboration of the team with other departments, especially other teams within the Supply Chain function.</li><li>Provide periodic feedback to the team, highlighting strengths and guiding improvements.</li><li>Encourage and develop the teams pursuit/implementation of process improvements and best practices in planning.</li><li>Adapt planning strategies to the specific needs of each business unit served.</li><li>Seek and apply new market trends and best practices to company processes.</li><li>Establish and monitor individual and team performance indicators, coordinating actions to meet targets.</li><li>Monitor and ensure resolution of pending issues.</li></ul>&nbsp;Requirements: Preferred Years of Experience / Minimum Qualifications: <ul><li>Bachelor’s degree in Production Engineering, Business Administration, Logistics, or related fields.</li><li>Postgraduate degree in the area is desirable.</li><li>Previous experience managing material planning teams.</li><li>Previous experience in the automotive industry.</li></ul> Required Skills: <ul><li>Knowledge of imported component management and S&amp;OP processes.</li><li>Advanced English for conversation.</li><li>Knowledge of SAP (PP and MM modules).</li><li>Proficiency in Microsoft Office Suite.</li><li>Availability to work on-site in Bragança Paulista, SP – Brazil.</li></ul>

Responsibilities: <ul><li>Be familiar with ASTM/ISO test standards and internal specifications, develop corresponding operation procedures.</li><li>Carry out qualification tests according to specification/SOP, ensure test tasks can be finished within schedule.</li><li>Support PM to test competitor products and customer’s application test.</li><li>Learn to operate flame test chamber and master flammability test method per UL224 all tubing and VW-1.</li><li>Support to do verification test for NPD projects</li><li>Develop new and improve existing test capability based on product test requirement.</li><li>Carefully record test data and results, check and review test data to meet specification requirements.</li><li>Analyze root cause of test failure and propose corrective action.</li><li>Prepare relevant test reports.</li><li>Take part in document management training, then upload test reports into PDMlink for approval.</li><li>Be responsible for maintenance of test equipment and instruments, spot check equipment carefully.</li><li>Maintain equipment calibration list and perform regular outsourcing calibration before expiration.</li><li>Purchase expendable chemicals, spare parts and tools in time, ensure they are available in any time.</li><li>Implement 5S and personal protection per company’s policy, ensure tidy environment and safety in lab.</li><li>Train and qualify new technicians.</li><li>Other job assigned by lab supervisor.</li><li>Continuous improvement. Look for and suggest efficiency improvements within qualification laboratory.</li></ul> Requirements: <ul><li>College or bachelor degree with more than 2 years working experience, major in material science is preferred.</li><li>Proficient in listening, speaking, reading and writing with Mandarin and English.</li><li>Be good at thinking and strong practical ability.</li><li>Good communication and interpersonal skills.</li><li>Familiar with PC and office software.</li><li>Hard-working and studious.</li><li>Be careful and responsible.</li><li>Team-work spirit.</li><li>Able to manage multiple priorities.</li><li>Stress resistant.</li><li>Flexibility to travel to suppliers, customers, company location. In-line with local travel protocols.</li><li>Have knowledge of VW/BMW/Daimler OEM specification advantage, but not essential;</li><li>Compounding or extrusion advantage, but not essential.</li></ul>

Responsibilities: <ul><li>Develop and manage the Compact Tractor business P&amp;L, ensuring alignment with growth and profitability targets.</li><li>Partner with Finance and Sales to develop accurate forecasts, pricing models, and incentive programs.</li><li>Collaborate cross-functionally with teams across Sales, Product Development, Service, Finance, Marketing, Parts, Operations, and Supply Chain to create and execute business plans.</li><li>Lead and manage product launches with key internal stakeholders.</li><li>Coordinate with marketing teams and agencies to develop advertising, digital content, brochures, point-of-purchase (POP) materials, and more.</li><li>Design and implement multi-level promotional and dealer engagement strategies, including launch events.</li><li>Develop branding and communication strategies aligned with targeted marketing initiatives.</li><li>Support training development programs for dealers on product features, sales approaches, and after-sales support.</li><li>Work with Regional Sales Managers to ensure effective utilization of Coop programs and local marketing execution.</li><li>Assist in the preparation of annual operating plans and budgets.</li><li>Conduct in-depth market analysis to identify customer needs, competitive positioning, and market expansion opportunities.</li><li>Translate customer insights and research into successful brand strategies.</li><li>Monitor and adjust marketing execution based on local market needs and sensitivities.</li></ul> Requirements: <ul><li>Master’s Degree required (MBA preferred).</li><li>3–5+ years of experience in product development, branding, sales, or marketing within relevant industries.</li><li>Strong strategic and tactical planning abilities grounded in market analysis.</li><li>Demonstrated ability to work in a flat organizational structure and matrixed business environment.</li><li>Strong analytical skills with the ability to interpret competitor actions and customer behavior.</li><li>Exceptional verbal and written communication skills.</li><li>Deep understanding of rural markets, especially in the U.S.</li><li>Creative thinking with strong problem-solving abilities and adaptability to changing priorities.</li><li>High standards of customer service and team collaboration.</li><li>Strong interpersonal and negotiation skills.</li><li>Intermediate proficiency with Microsoft Office Suite and Microsoft Teams.</li><li>Physical ability to perform the duties as described (occasional standing, walking, kneeling, etc.).</li><li>Fluency in English (spoken and written) is required.</li></ul>

Skills

Industry

Location

Jobtitle

34 hazardous materials Jobs found

Manager, Operations

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Manufacturing and Process Development Engineer

Cost Accountant

Inventory Analyst

Materials Planning Supervisor

Test engineer

Category Manager

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

34 hazardous materials Jobs found

Manager, Operations

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Manufacturing and Process Development Engineer

Cost Accountant

Inventory Analyst

Materials Planning Supervisor

Test engineer

Category Manager

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.