Systems Engineer II

Senior Quality and Reliability Engineer

Lab Manager

MGR II Laboratory

Senior Lead Engineer

Embedded Manager - Sensors

Test Laboratory Engineer

Technical Support Manager

Responsibilities:&nbsp;&nbsp; <ul><li>Develop Solar PV design/construction packages including solar array layouts, electricalSLD, DC collection systems, collection system studies (Cable Ampacity, Power Losses), and equipment installation details for Utility Scale Solar PV systems (5-500MW+)</li><li>Perform analysis and evaluations to determine the most cost-effective DC CollectionSystem designs for Utility Scale Solar PV Systems (5-500MW+)</li><li>Support development of early-stage projects with conceptual designs and material take-offs (pre-LNTP)</li><li>Manage external subcontractors for other adjacent services Interact directly with clients for successful project execution</li><li>Use Excel spreadsheets, commercial and proprietary engineering software to designSolar PV systems</li><li>Potential site visits to gather notes and take pictures of existing conditions to aid indesign and identify critical flaws</li><li>Contribute to continual development of internal solar engineering standards, toolsets,and work processes</li><li>Turning initial system conceptual ideas into fully developed optimized EPC designs</li><li>Oversee and execute process improvements and the development of policies,procedures, methods, and tools in support of delivery</li><li>Responsibilities include supporting pre-sales processes and working with sales andaccount management professionals to win new business; implementing business; proposal review and refinement; recruiting and staff development</li><li>Research and development in solar technology for new product development and stay current on new technological developments in the field Generates new ideas, goes beyond the status quo; recognizes the need for new or modified approaches</li></ul> Requirements: <ul><li>Electrical Engineering Degree</li><li>Education or experience with power systems analysis and design</li><li>Previous experience in the electrical engineering of Renewable Energies (Solar) Systems</li><li>Proficiency use of Excel and AutoCAD</li><li>Working knowledge of electrical codes/standards (NEC, NBR, AEA, NTC, IEC, IEEE)</li><li>Ability to read, comprehend and apply electrical codes and/or standards (NEC 690-691,NEC 310, IEC 62548, IEC 62738)</li><li>Experience with cable sizing (ampacity, voltage drop) and power loss calculations</li><li>Strong written and oral communication skills, including study report writing</li><li>Strong presentation and negotiation skills</li><li>Strong operational, project management, consulting technology and process skills</li><li>Functional expertise with PVSyst, SAM or PVFarm for PV analysis – Desired</li></ul>

Responsibilities: <ul><li>Lead reliability planning and testing activities for new and existing products.</li><li>Define and implement reliability test plans based on product specifications, usage environments,&nbsp;and customer expectations.</li><li>Conduct Failure Mode and Effects Analysis (FMEA), Root Cause Analysis (RCA), and statistical&nbsp;analysis to identify and mitigate risks.</li><li>Collaborate closely with Design, Quality, Manufacturing, and Product Development teams to&nbsp;ensure reliability is embedded in the product life cycle.</li><li>Develop and maintain reliability models, such as Weibull analysis, and interpret results to guide&nbsp;engineering decisions.</li><li>Support qualification testing, including environmental, mechanical, and electrical stress tests.</li><li>Interface with customers to provide technical support and reliability data when needed.</li><li>Document and present reliability reports, metrics, and improvement actions to stakeholders.</li><li>Mentor and guide junior engineers within the reliability or cross-functional teams.</li></ul> Requirements: <ul><li>Bachelors or Master’s Degree in Mechanical, Electrical, Electronics Engineering or related field.</li><li>Minimum 5-7 years of relevant experience in reliability engineering, preferably in electronic&nbsp;components or a manufacturing environment.</li><li>Strong knowledge of reliability testing standards (e.g., IEC, MIL-STD, JEDEC).</li><li>Experience with statistical tools and software (e.g., Minitab, JMP).</li><li>Hands-on experience in conducting HALT/HASS, thermal cycling, vibration, and environmental&nbsp;testing.</li><li>Excellent problem-solving skills and experience with tools like 8D, Ishikawa, and FMEA.</li><li>Effective communication skills, both written and verbal.</li><li>Ability to work independently and in a team-oriented, cross-functional environment.</li></ul>

Responsibilities: Primary Duties: <ul><li>Coordinate scheduling of resources and tests to maximize lab utilization while meeting project deadlines and communicating them to (primarily internal) customers.</li><li>Lead and mentor a team of technicians and engineers, providing guidance, training, and support as needed.</li><li>Manage inventory of high voltage testing equipment, including procurement, maintenance, and retirement planning.</li><li>Ensure compliance with safety standards and regulations, implementing necessary policies and procedures to maintain a safe working environment.</li><li>Ensure compliance with audits such as ISO 17025.</li><li>Monitor project progress, identify potential issues, and implement solutions to ensure successful project completion.</li><li>Foster a collaborative and productive work environment, promoting teamwork and professional development.</li><li>Conduct performance evaluations and provide feedback to team members to drive continuous improvement.</li><li>Implement quality control measures to ensure accuracy, reliability, and consistency of test results.</li><li>Review test data and reports to verify compliance with project requirements and specifications.</li><li>Continuously assess and improve testing procedures and methodologies to enhance efficiency and effectiveness.</li><li>Evaluate new technologies and equipment upgrades, recommending investments to enhance lab capabilities.</li></ul> Requirements: What Your Background Should Look Like: <ul><li>Bachelor’s degree in Electrical Engineering, Physics, or a related field; Master’s degree preferred.</li><li>8+ years’ experience with minimum 2+ years in high voltage testing 35kV+, and should have 2+ years’ in leadership role - preferably in an industrial or research setting; and laboratory experience required.</li><li>Proven project management abilities, including the ability to prioritize tasks, allocate resources, and meet deadlines.</li><li>Excellent leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders.</li><li>Understanding of electrical engineering principles, particularly in the areas of high voltage systems and insulation testing.</li><li>Familiarity with relevant standards and regulations, such as IEEE, IEC, ANSI, and NFPA.</li><li>Attention to detail and a commitment to quality, with the ability to troubleshoot problems and implement solutions in a timely manner.</li></ul>

Responsibilities: Undertake overall Responsibility:&nbsp; <ul><li>Manage in FA function and leading modern technology to coordinating with engineering to develop core Tech and able to expand to lab levels for daily delegated tasks to manage the related database consolidation.&nbsp;</li><li>Driving with company OA improvement on process or capability improvement to make lab goals achieved and support engineering to win in markets.&nbsp;</li></ul> Responsible for Strategy:&nbsp;&nbsp; <ul><li>Set clear FA direction goals and develop strategies with high-level visions that reframes what winning looks like and approaches to fulfil modern technology assignments in creative and meaningful ways.</li><li>Providing strategy for FA/Lab directions align with organization value drivers and tactics to key program execution with excellence and flexible. </li><li>Such as Identify FA team with right size, people skills and address technical assistance to design feasibility and make recommendations for necessary changes.</li><li>Transform stakeholders need and assess FA/Lab capability tried-and-true options for scenarios allocate resources to high priorities (people, cost $, management attention, sustainability etc) to significantly shorten the product design cycle and help bring products to market faster while ensuring high quality and performance. </li><li>also sorts of possibilities to creating an optimal flow to shaping up team to be more engaging and easier to follow.</li><li>With financial knowledges to assess capability and predict organization forecast and analysis per budget scope, and build long-term constructive common ground network across the adjacent functions such as Product Engineering, Project Engineering and Field Application Engineering etc.&nbsp;</li><li>Align organization culture targeting and systematically pursuing specific areas for further secure lab competitiveness, i.e. (Software/ System/CoE/ 3DP/New Tech etc)&nbsp;</li></ul> Responsible for lab strategy mobilization and execution: <ul><li>Communicate and distribute the requirements per lab programs implementation keeps FA/Lab ahead of or at pace with the competition,</li><li>Boost and Outline the necessary investment plan of amount, relevance and quality of test equipment in FA/lab, driving efficiency to maximize value and return on investment.</li><li>Create and use systems for monitoring and manage various performance in FA function OKR/KPIs to process control and follow up and streamline the process and balance of stability and agility that maximizes the speed and effectiveness by using digital data-driven techniques, show diagram visually.</li><li>Broad knowledge to develop FA/Test/3DP etc method per core technology to foster FA/lab growing, and design new correction/prevention quality initiatives to pinpoint the risks and minimize lab operation obstacles, build resilience ahead of any potential crises and update risk assessments so that enable lab able to mitigate the impact and unlock opportunities.</li><li>Define FA/Lab operation mechanism, criteria, and management discipline to ensure FA/Lab for daily work what is in good working order.</li><li>Leading Team use data to make timely decisions.&nbsp;</li><li>Research new development method and set guidelines enables engineering/manufacturers to better process control and maintain quality within acceptable limits to prevent failure in early stage, approaching smart tech to accelerate the testing,inspection and analysis activities,&nbsp;</li></ul> Succession Talent Effectiveness:&nbsp; <ul><li>Identify key talents per OLR and drive team and equip team development goals to ensure most value-creating roles in lab filled with right position.</li><li>Capable with management skills to prepare effective office support in place, such as Give Training and properly communicate findings so as to help team to continuously improving their abilities to ensure lab organization successfully and sustainable as whole team can do or to achieving next level."</li></ul> Requirements: <ul><li>Master’s degree or above level of qualification in Engineering technology areas</li><li>Minimum 8+years of similar industry Engineering field and for management, English listening, speaking, writing ability are required.</li><li>Experience in technical technology on validation test, Failure Analysis, or 3D printing, tool application or system Engineering preferred.</li><li>Proactive oriented and tenacity to results driven.</li><li>practitioner well on logic and structure skills</li><li>Manager level experiences with ISO/IEC 17025 lab system standards and engineering skills</li><li>Demonstrated ability in conducting audits and all aspects of communication, collaboration and team building skills.</li><li>Proficient ability in developed the new tech to reduce redundant testing or inspection activities, or experience for new program/project boosting and launch preferred.</li><li>Outstanding engineering background and Test field for now organization management and with software capabilities would prefer.</li></ul>

Responsibilities: <ul><li>Create innovative electronic designs to the latest relevant standards (In particular measuring circuits to IEC 61010-1).</li><li>Technical lead for strategic development projects.</li><li>Play a key role in the design and development of next-generation products.</li><li>Experience in digital, electronic circuit design including measurement design and microprocessor selection.</li><li>Experience in analogue circuit design and switch mode power supplies would be advantageous.</li><li>Knowledge of common network protocols, Ethernet, Modbus, Bacnet.</li><li>Experience in Electronic Circuit layout from 1kV to 5V power and signal.</li><li>Working arrangements will be Hybrid but can consider remote depending upon the candidate capabilities.(Remote working decision is upto the HM).</li><li>Multiple benefits and bonuses.</li></ul> Requirements: <ul><li>Degree in a related subject (Electronic Engineering).</li><li>Min 10 years’ experience in digital, electronic circuit design including measurement design and microprocessor selection.</li><li>Experience in analogue circuit design and switch mode power supplies would be advantageous.</li><li>Knowledge of common network protocols, Ethernet, Modbus, Bacnet.</li><li>Experience in Electronic Circuit layout from 1kV to 5V power and signal.</li><li>Appreciation of basic CAD principles and software.</li><li>Good problem-solving skills.</li><li>Excellent communication skills in English.</li><li>Able to work cross-functionally at all levels of the business.</li><li>Decisive and confident.</li><li>High level of computer literacy.</li><li>Planning and preparation skills.</li><li>Design for EMC.</li><li>Design for UL Certification.</li></ul>

About role <ul><li>As a Manager, Embedded Software Engineering, you will be responsible for managing Platform developments requiring software development (embedded software, firmware) for the sensor products to grow the sensors portfolio serving the Industrial &amp; Medical markets.&nbsp;</li><li>This leader will build and lead a high-performing team of engineers that will engage with Global and Regional Engineering Teams in various Centers of Expertise all around the world.</li><li>The Manager, Embedded Software Engineering will engage and work with internal cross-functional engineering teams across the globe as well collaborate with internal and external technical partners of engineering teams/NPI teams. He/She will need to be comfortable, experienced, and adept working across time zones, geographical and organizational boundaries as well as ambiguity.</li><li>The Manager, Embedded Software Engineering will leverage a structured and systematic approach, applying best practices and Lean Product Development principles such as Front Loading, Risk Detection &amp; Countermeasures and Set Based Concurrent Engineering … all to ensure programs meet technical, performance &amp; product cost requirements, are completed on time and within the project budget.</li><li>The ideal candidate would be a highly experienced leader with vast experience developing and successfully delivering software in the industrial or medical markets, former Senior Design Engineer/Technologist, or a Senior Software Architect.&nbsp;</li><li>Also having experience of design for functional safety applications in Lean Product Development and DFSS frameworks, he/she can be proficient in IEC 61508 Functional Safety Standards. The Manager, Embedded Software Engineering, will bring know-how in CI/CD and highly efficient/automized agile developing processes&nbsp;</li></ul> Responsibilities: <ul><li>Leading IMS Sensor software development team, mainly working on software architecture, System and Software Design, Software development, CI/CD and Testing. Analyzing and elicit stakeholder (internal/external) requirements to generate software requirement.</li><li>Leading all aspects of the software development life cycle:</li><li>Requirements capture</li><li>Feasibility study and architecture definition</li><li>Software design and implementation</li><li>Integration and unit/validation testing</li><li>Ensure the link between the SW architecture and the SW development</li><li>&nbsp;Facilitate collaboration with international development teams</li><li>Leader of the software project team to develop new products/processes using DFSS tools &amp; techniques and software metrics</li><li>He/She will have to perform architecture and requirement review, challenging their consistency, maturing change request, and analyzing their risks and impacts</li><li>Work with hardware and project team to propose the hardware / software roadmap for the future, enabling SIL and cost reduction. He/She will also work with test/qualification team to ensure all the defined software is well tracked and validated.</li><li>Work closely with software project management, product line engineering and quality teams.</li><li>Perform firmware safety-oriented analysis (IEC 61508)</li><li>Leverage structured new product development process and participate to stage gate frameworks</li><li>Anticipate and alleviate bottlenecks, identify and mitigate risks, provide escalation management, anticipate and make tradeoffs and be responsible to ensure every aspect of the project is properly and promptly executed.</li><li>Constantly assess what is working, what is not working, identify areas for improvement and consistently drive continuous improvement.</li><li>Continuous training of employees and drive the exchange of experience.</li><li>Provide training, coaching, and mentoring to team members creating a team mindset and culture that is aligned with our clients core values.</li></ul> Requirements: <ul><li>Above average engineering degree in Computer Science, Electrical/Electronics/ Communication Engineering or related</li><li>12+ years of technical experience in delivering embedded software</li><li>Experience leading product development teams, ideally in cross-functional, multi-site environments and drive results in projects with multiple dependencies and constraints Excellent knowledge of Software Development Life Cycle (SDLC) and hands on experience in C/C++ programming and modern agile SW toolsets</li><li>Experience in Microcontroller based system development (using ARM based microcontrollers)</li><li>Experience in wireless protocols LoRaWAN or LPWAN, MQTT, ZigBee, Bluetooth 5.1 supporting BLE protocol and IoT infrastructure</li><li>Expertise in secured bootloader</li><li>Expertise in UML / SYSML using Enterprise Architect or MathWorks System Composer</li><li>Expertise in SW-DFMEA</li><li>Experience with secure and safe coding standards for C/C++ (CERT SEI / MISRA C, etc.)</li><li>Good knowledge of Key Peripherals: ADC, GPIO, SPI, I2C, UART, etc.</li><li>Good experience in application lifecycle management as CodeBeamer</li><li>Good experience in configuration management (Git / Gitlab)</li><li>Good experience in continuous integration and continuous testing</li><li>Good experience in Vectors tools: CANoe / CANalyser</li><li>HW skills: Able to read HW schematics</li><li>Good knowledge on Software / Hardware debugging tools, Oscilloscopes, JTAG, Logic Analyzers</li></ul>&nbsp;Qualification: <ul><li>Functional Safety (SIL) Knowledge and Expertise</li><li>Experience in sensor technology</li><li>DFSS certification</li><li>LEAN development experiences</li><li>Power Management knowledge</li><li>Unified Diagnostic Services (UDS) knowledge</li><li>Python coding knowledge</li></ul>&nbsp;Motivation/Culture Fit: <ul><li>Result driven</li><li>Problem solving</li><li>Clear and concise communication</li><li>Passion for technology and innovation</li><li>Cross-Team Collaboration</li></ul>

Responsibilities : <ul><li>Conduct electrical, mechanical, and environmental testing on our client products for the purpose of Engineering Evaluation and Qualification.</li><li>Prepare samples using hand tools and soldering.</li><li>Run a variety of computer and microprocessor-controlled test equipment.</li><li>Set-up &amp; operate environmental, mechanical and electrical test equipment</li><li>Review and summarize data.</li><li>Maintain the integrity of test results by complying with Corporate, Business Unit and local quality system requirements.</li><li>Review active test programs and final test results to ensure that performance requirements are met.</li><li>Capable of working to specifications, drawings, diagrams, and schematics.</li><li>Ensure all safety requirements are met and followed</li><li>Write test documentation and reports.</li><li>Perform other duties as assigned by management.</li><li>Overtime or temporary shift in hours may be required at times to support high priority business needs.</li></ul> Requirements : <ul><li>A preferred candidate should have, or be actively pursuing, an HNC or equivalent in Electronic or Mechanical Engineering, or have 3-5 years’ experience in testing.</li><li>Background of mechanical experience to aid fixture design and construction.</li><li>Good soldering skills and manual dexterity.</li><li>Hands on experience for tearing apart assemblies / sub-assemblies of electro mechanical parts</li><li>Good Conceptual, problem solving and Analytical Skills</li><li>Excellent verbal and written communication skills.</li><li>Excellent attention to detail</li><li>Knowledge of Six Sigma tools will be an added advantage</li><li>Proficient in MS Office Suite</li><li>Ability to work in a hands-on environment.</li><li>Ability to work well with others of diverse backgrounds.</li><li>Knowledge of Global Certifications and Regulatory Standards (UL, IEC, MIL etc.) is an advantage</li><li>Must be capable of multitasking and taking full ownership of assigned projects.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or UK Military controls.</li></ul>

Responsibilities: <ul><li>Coordinate scheduling of resources and tests to maximize lab utilization while meeting project deadlines and communicating them to (primarily internal) customers.</li><li>Lead and mentor a team of technicians and engineers, providing guidance, training, and support as needed.</li><li>Manage inventory of high voltage testing equipment, including procurement, maintenance, and retirement planning.</li><li>Ensure compliance with safety standards and regulations, implementing necessary policies and procedures to maintain a safe working environment.</li><li>Ensure compliance with audits such as ISO 17025.&nbsp;</li><li>Monitor project progress, identify potential issues, and implement solutions to ensure successful project completion</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical Engineering, Physics, or a related field; Master’s degree preferred.</li><li>8+ years’ experience with minimum 2+ years in high voltage testing 35kV+, and should have 2+ years’ in leadership role - preferably in an industrial or research setting; and laboratory experience required.</li><li>Proven project management abilities, including the ability to prioritize tasks, allocate resources, and meet deadlines.</li><li>Excellent leadership and communication skills, with the ability to effectively manage teams and collaborate with diverse stakeholders.</li><li>Understanding of electrical engineering principles, particularly in the areas of high voltage systems and insulation testing.</li><li>Familiarity with relevant standards and regulations, such as IEEE, IEC, ANSI, and NFPA.</li><li>Attention to detail and a commitment to quality, with the ability to troubleshoot problems and implement solutions in a timely manner.</li></ul>

Skills

Industry

Location

Jobtitle

8 iec Jobs found

Systems Engineer II

Senior Quality and Reliability Engineer

Lab Manager

MGR II Laboratory

Senior Lead Engineer

Embedded Manager - Sensors

Test Laboratory Engineer

Technical Support Manager

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

8 iec Jobs found

Systems Engineer II

Senior Quality and Reliability Engineer

Lab Manager

MGR II Laboratory

Senior Lead Engineer

Embedded Manager - Sensors

Test Laboratory Engineer

Technical Support Manager

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.