Strategic Sourcing Analyst III

Manager – Operations

Manager II – Manufacturing & Process Development Engineering

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Senior Product Development Engineer

Supervisor Assembly III

R&D Product Development Engineer II

Operations Manager

Maintenance / Manufacturing Technician

Solar Design Engineer

Responsibilities: <ul><li>Focal point of all supply chain initiatives associated with NPD for assigned product lines.</li><li>Develop &amp; implement all integrated supply chain activities for New Product Introduction.&nbsp;</li><li>Fully understand new project background information, including project footprint plan, project commercial information in terms of sample/ramp up/MP schedule and cost target, BOM components technical requirement and etc.&nbsp;</li><li>Develop strategic vision for supply base at conception phase of new products.</li><li>Improve time to market including quotation and sampling activities, driving material standardization,&nbsp;</li><li>Arrange RFQ, analyze and organize SSR meeting to award business based on cost, lead time, core competency, and location.</li><li>Ensure vendor quoted costs meet BOM cost Landing Zone targets. Work with commodity management team and should cost team to achieve the target.</li><li>Design first-time-right supply chains for new products / platforms during development phase</li><li>Promote Dual Source and Localization in new project phase.&nbsp;</li><li>Work with commodity management to leverage supplier capabilities and improve collaboration among company and supply base</li><li>Improve overall service from Procurement to Internal customer e.g. project managers and project core team members.&nbsp;</li><li>Provide strong support for company manufacturing plant(s) for NPI.&nbsp;</li><li>Holds Voice of Customer Sessions with internal customers and utilizes feedback to improve team performance and supply base service.&nbsp;</li><li>Complete special projects as directed by regional or global management.</li></ul> Requirements: <ul><li>6+ years’ experience in NPD Sourcing or project management role.</li><li>Proven Experience in New Product Introduction as a sourcing analyst in a global company is preferred</li><li>Experience in sourcing mechanical components such as stamping, molding, diecasting, machining, and electronics components such as PCB, PCBA, cable. Technical understanding of these commodities is required.</li><li>Education: Bachelor level degree in Business, Supply Chain, Sourcing/ Procurement or related field. Advanced degree a plus.</li><li>Strong communication skills both written and verbal English.</li><li>Self-motivated individual with a positive attitude, able to work well with international teams and individuals.</li><li>Strong analytical skills, comprehensive and logic thinking.&nbsp;</li><li>Demonstrated negotiation skills.</li><li>Proficient in MS office suite; advanced Excel, Power point.</li><li>Lean PD experience is a plus.</li><li>Previous SAP experience or training a plus.</li></ul>

Role Description: <ul><li>The above position has been created to lead a team of Mechanical Designers, Electrical Automation Engineers in the Operations team to define the process and build them with Maintenance and Facility responsibility of the Plant</li></ul> Responsibilities: <ul><li>Responsible for achieving the Safety, Quality, Cost and Delivery parameters of all the Value Streams with the help of respective Value Stream Leader.</li><li>Responsible to achieve the TPM(Total Productive Maintenance) KPI of Maintenance sections (Machines and Testers).</li><li>Ensure implementation and effective usage of all the relevant Lean Tools (Our client Tools) in the Value Streams and Maintenance.&nbsp;</li><li>Ensure the accuracy of the WIP Stock with continued reduction as per Lean principles.</li><li>YOY Productivity improvement for the Operations through Cost Saving Projects, Efficiency improvement, Operational Material Savings.</li><li>Should be able to scale up the teams competencies to meet the requirements of the new product and processes.</li><li>Should be able to demonstrate Mental and Change agility to deal with technology shift as required for New product introduction.</li></ul> Requirements:&nbsp; <ul><li>B.E, Diploma (Mechanical, Production) </li><li>Master’s in business administration would be an added advantage&nbsp;</li><li>12-15 years total experience, with hands on experience in the Manufacturing department of a Mass production unit (Automotive, EMS</li><li>At least 4-5 years experience of leading the operations function in Molding/Headers/Connectors manufacturing.</li></ul>

Responsibilities: Lead a team of engineers who will: <ul><li>Develop power connector assembly manufacturing process in accordance with LEANPD product development.</li><li>Drive for excellence in existing manufacturing technologies and methods.</li><li>Strive to implement new manufacturing technologies to provide improved process and tolerance control.</li><li>Support Product Development in the optimization designs (DFM) and piece parts for manufacturability; realizes sample tooling, product samples, and prototypes.</li><li>Design, develop, and qualify tooling and processes to meet company DDN quality and production standards.</li><li>Support the supply chain to verify supplier compliance and capability.</li><li>Act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Maintain communication with the project management team to understand current and future strategic business needs</li><li>Prioritize and time manage a portfolio of projects/work efforts based on criticality and business need</li><li>Provide readouts to Senior manager and Director-level cross-functional management as necessary</li><li>Work with the Philippines operations team to assign resources necessary for the successful execution of new product development</li><li>Facilitate and coordinate cross-functional communication across globally matrixed organizations</li></ul> Requirements: <ul><li>Bachelors or above degree with mechanical/electrical related majors.</li><li>At least 5 years of managerial-level experience related to a multinational manufacturing site.</li><li>Familiar with Lean, Six Sigma. etc. industrial methods/tools.</li><li>With 2 years or above work experience in the connector assembly industry is preferred.</li><li>Fluent in English and good presentation skills.</li><li>Familiar with MS software.</li><li>Familiar with industrial specification (i.e., IPC 620).</li><li>Familiar with Stamping / Plating / Molding / Assembly processes</li></ul>

Overview: <ul><li>On-site customer work across the EMEA region (Data Centers, Utilities, Oil &amp; Gas) Remote work handling administrative and planning tasks</li><li>Candidates can be based in Ireland, the UK, Netherlands, Poland, or Romania, ideally near a major airport.</li></ul> Responsibilities: <ul><li>Lead installation, maintenance, commissioning, testing, and fault-finding of MV and HV equipment</li><li>Lead installation projects, oversee third-party providers, support fellow engineers, and ensure equipment operates at optimal performance.</li><li>Perform site testing (e.g., insulation resistance, primary/secondary injection, functional testing)</li><li>Provide advanced technical support and root cause analysis for complex power distribution fault</li><li>Review and approve service documentation, test reports, and commissioning records</li><li>Act as the primary customer contact during project execution</li><li>Support and mentor service engineers, promoting safety and best practices</li><li>Collaborate with project teams to meet delivery targets and ensure customer satisfaction</li></ul> Requirements: <ul><li>Higher Diploma or Degree in Electrical Engineering</li><li>Proven experience in power distribution testing and commissioning</li><li>Ability to test and commission large MV to HV installations</li><li>Experience with protection relay programming</li><li>Strong IT skills and attention to detail</li><li>This is a hands-on, customer-facing position suited for candidates with a strong technical background. Skills:</li><li>Strong troubleshooting and problem-solving abilities</li><li>Leadership mindset with the ability to coach and develop others</li><li>Flexibility to travel extensively across the EMEA region</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Role Description: <ul><li>Plans and establishes production work schedule to meet delivery times and best utilize company production capacity.</li><li>Initiate work orders and ensure that all products are produced to the specified specifications and ensure conformance to the schedule.</li><li>To manage the shift and all direct staff to ensure the smooth running of the production process, complying with the company’s Health and Safety procedures.</li></ul> Responsibilities:&nbsp; <ul><li>Plan, schedule, and manage production workflows to meet delivery timelines while ensuring all products conform to required specifications.</li><li>Supervise and lead shift teams, ensuring smooth production operations and strict adherence to all Health &amp; Safety guidelines within the plant.</li><li>Oversee material and production planning, including initiating work orders, maintaining inventory accuracy, and participating in stockroom and physical inventory processes.</li><li>Drive operational excellence through continuous improvement, supporting initiatives such as our client /Kaizen to enhance efficiency, quality, and overall production performance.</li></ul> Requirements: Leadership Experience:&nbsp; <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul> Project Experience:&nbsp; <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer customer-centric approach and adherence to customer expectations to promote a positive company image.</li><li>Play an active role in the our client plan/Kaizen initiative to achieve plans for future growth within the company.&nbsp;&nbsp;</li></ul> Education: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer.&nbsp;</li></ul> Other Requirements:&nbsp; <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.&nbsp;</li></ul>

Responsibilities: <ul><li>Design &amp; Development of automotive products like Connectors, Header, Terminals, Automotive components.&nbsp;</li><li>Interact directly with customers / Sales and Marketing team to identify key Product Technical requirements / deliverables and establish product specifications to fulfil customer requirements in handling new concepts / quotations.</li><li>To lead and drive complex new product development products starting from concepts generation, DFMEA, DFM/DFA, prototyping &amp; testing.</li><li>To generate 3D CAD models &amp; 2D drawings in PTC Creo for Connector, Terminal, Header &amp; other auto components.&nbsp;</li><li>Responsible for creating test specifications, deciding test methods, DVP Preparations &amp; testing and validation.</li></ul> Requirements: <ul><li>B.E (Mechanical)</li><li>Minimum 2 to 9 years of hands-on experience in automotive plastic components development (preferably Connectors).</li><li>Good Experience in Product validation and testing (DV / PV) of automotive products.</li><li>Exposure to manufacturing processes like Injection molding, stamping, Manufacturing and assembly etc.</li><li>Exposure to APQP &amp; PPAP activities.</li><li>Exposure to Design review processes like DFEMA / DFA / DFM / FEA etc.,</li><li>Exposure to IATF 16949 / TS 16949.</li><li>Problem solving and critical thinking.</li><li>Good CAD Modelling skills (Pro-E / Creo), AutoCAD.</li><li>Strong 2D drawing drafting skills.</li><li>Good working knowledge on GD&amp;T &amp; Tolerance Stack up analysis.</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment</li><li>Troubleshoot equipment failures and repair as needed</li><li>Perform specified preventative maintenance on production equipment to prevent equipment down-time</li><li>Perform Lock Out / Tag Out requirements.</li><li>Work from blueprints, manuals, sketches and verbal instructions.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>High school diploma or equivalent</li><li>5+ years experience in injection molding maintenance or extrusion, or mechanical, hydraulic, pneumatic and electrical repair</li></ul>

Responsibilities: <ul><li>Work with cross functional teams to transform VOC into internal specifications and design features, documented properly as Product Requirements Document.</li><li>Design and develop new products for renewable applications using metallic and polymeric material to meet customer requirements</li><li>Assess technical risk and compliance of project</li><li>Prototype sample development for feasibility studies</li><li>Product Data management of engineering bill of materials</li><li>Executing on cost optimization/reduction (VA/VE) opportunities for the business</li><li>Engineering communication with global team and localize global product teams in China</li><li>Preparing design verification test plans, Design C Process FMEAs, FEAs</li><li>Engineering sample preparation for design and process verification tests</li><li>Executing test plan within the lab, ensuring successful product testing and verification results</li><li>Perform failure mode analyses and improvements to optimize product</li><li>Recording results of design reviews, design decision meetings, and writing technical summaries</li><li>Assisting with product compliance and approvals for all new products and platforms</li><li>Work with FAI approvals, Process Capability Study, judging manufacturing deviations and make decisions on deviation acceptance</li></ul> Requirements: <ul><li>Must have a minimum of an Bachelors degree in a discipline of Engineering</li><li>More than 5 years design experience on connector, plug or terminal. Solar or battery energy storage relevant or power / utility design experience is plus,not must</li><li>Ability to develop connectors to meet critical global standards, such as ANSI, UL, IEEE, and IEC</li><li>Component material selection to optimize strength, electrical insulation, stability, and longevity, while meeting the product and standard requirements</li><li>Basic knowledge of product development processes in a stage-gate approach</li><li>A basic understanding of manufacturing processes, such as molding, stamping, plating, and assembly processes</li><li>Possesses high degree of initiative, technical competence, engineering process knowledge and strong communication skills</li><li>Fluent communication with own team, customers, internal business leaders and technology leaders in English (CET-4 or above)</li><li>LDFSS or DMAIC 6-sigma black or green belt an advantage</li><li>Familiarity of engineering software: Creo or Pro/E</li><li>Mastery of office software, such as Word, Excel, PPT, etc.</li></ul>

Skills

Industry

Location

Jobtitle

14 injection molding Jobs found

Strategic Sourcing Analyst III

Manager – Operations

Manager II – Manufacturing & Process Development Engineering

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Senior Product Development Engineer

Supervisor Assembly III

R&D Product Development Engineer II

Operations Manager

Maintenance / Manufacturing Technician

Solar Design Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

14 injection molding Jobs found

Strategic Sourcing Analyst III

Manager – Operations

Manager II – Manufacturing & Process Development Engineering

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Senior Product Development Engineer

Supervisor Assembly III

R&D Product Development Engineer II

Operations Manager

Maintenance / Manufacturing Technician

Solar Design Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.