Staff Quality & Reliability Engineer

NPD Strategic Sourcing Analyst

Senior Manufacturing Engineer

Manufacturing Technician V (Senior Technician)

Manufacturing Team Leader

Senior Product Development Engineer (Mechanical Design)

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Responsibilities: <ul><li>Focal point of all supply chain initiatives associated with NPD for assigned product lines.</li><li>Develop &amp; implement all integrated supply chain activities for New Product Introduction.&nbsp;</li><li>Fully understand new project background information, including project footprint plan, project commercial information in terms of sample/ramp up/MP schedule and cost target, BOM components technical requirement and etc.&nbsp;</li><li>Develop strategic vision for supply base at conception phase of new products.</li><li>Improve time to market including quotation and sampling activities, driving material standardization,&nbsp;</li><li>Arrange RFQ, analyze and organize SSR meeting to award business based on cost, lead time, core competency, and location.</li><li>Ensure vendor quoted costs meet BOM cost Landing Zone targets.&nbsp;Work with commodity management team and should cost team to achieve the target.</li><li>Design first-time-right supply chains for new products / platforms during development phase</li><li>Promote Dual Source and Localization in new project phase.&nbsp;</li><li>Work with commodity management to leverage supplier capabilities and improve collaboration among company and supply base</li><li>Improve overall service from Procurement to Internal customer e.g. project managers and project core team members.&nbsp;</li><li>Provide strong support for company manufacturing plant(s) for NPI.&nbsp;</li><li>Holds Voice of Customer Sessions with internal customers and utilizes feedback to improve team performance and supply base service.&nbsp;</li><li>Complete special projects as directed by regional or global management.</li></ul> Requirements: <ul><li>10+ years’ experience in NPD Sourcing or project management role.</li><li>Proven Experience in New Product Introduction as a sourcing analyst in a global company is preferred</li><li>Experience in sourcing mechanical components such as stamping, molding, diecasting, machining, and electronics components such as PCB, PCBA, cable. Technical understanding of these commodities is required.</li><li>Education: Bachelor level degree in Business, Supply Chain, Sourcing/ Procurement or related field.&nbsp;Advanced degree a plus.</li><li>Strong communication skills both written and verbal English.</li><li>Self-motivated individual with a positive attitude, able to work well with international teams and individuals.</li><li>Strong analytical skills, comprehensive and logic thinking.&nbsp;</li><li>Demonstrated negotiation skills.</li><li>Proficient in MS office suite; advanced Excel, Power point.</li><li>Lean PD experience is a plus.</li><li>Previous SAP experience or training a plus.</li></ul>

Responsibilities: <ul><li>Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality</li><li>Develop, validate, and implement manufacturing processes and tooling for new and existing products</li><li>Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability</li><li>Identify root causes of production issues and implement corrective and preventive actions</li><li>Lead Lean Six Sigma and 5S initiatives across the production floor</li><li>Support capacity planning and equipment layout optimization</li><li>Develop and maintain process documentation, work instructions, and standard operating procedures</li><li>Ensure compliance with safety standards, quality systems, and regulatory requirements</li><li>Mentor junior engineers and provide technical guidance to the operations team</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field</li><li>Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques</li><li>Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis</li><li>Proficient in CAD software and Microsoft Office applications</li><li>Excellent analytical, problem-solving, and communication skills</li><li>Ability to lead cross-functional teams and manage multiple projects</li><li>Experience in the electronics or connectivity components industry is an advantage</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment</li><li>Troubleshoot equipment failures and repair as needed</li><li>Perform specified preventative maintenance on production equipment to prevent equipment down-time</li><li>Perform Lock Out / Tag Out requirements.</li><li>Work from blueprints, manuals, sketches and verbal instructions.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>High school diploma or equivalent</li><li>5+ years experience in injection molding maintenance or extrusion, or mechanical, hydraulic, pneumatic and electrical repair</li></ul>

Responsibilities: <ul><li>Assist and monitor employees in job performance, answer questions, maintain action log, and provide&nbsp;</li><li>input to Area Lead on employee’s job performance.</li><li>Maintain production schedules by ensuring that each line is set-up per the prescribed line layout, has proper equipment, fixturing, tools, proper prints, in-process inspection sheets, and work instructions at the beginning of each shift, after line changeover, and during the shift.</li><li>Ensure proper clean up.</li><li>Ensure proper operation and guarding of equipment, report any unsafe equipment and/or unsafe acts.</li><li>Set good examples for quality, attendance, confidentiality, professionalism and display a positive attitude.</li><li>Consistently apply the Quality System procedures and enforce company policies and safety regulations.</li><li>Complete all documentation as required by department work instructions.</li><li>Ensure all suspect or reject material is quarantined and handled per Quality System procedures.</li><li>Make decisions and accept responsibility on operations related to assigned lines.</li><li>Assist in performing and evaluating 1st piece inspections for products as directed.</li><li>Post quantity goals and turn goal results in to Area Lead</li><li>Promote teamwork within the Production Line</li><li>Work closely with production control to react to schedule changes.</li><li>Communicate all appropriate issues to Area Lead.</li><li>Ensures production paper work is processed in a timely and accurate manner.&nbsp;</li><li>Perform other related duties and assignments as required.</li></ul> Requirements: <ul><li>High School diploma or GED</li><li>Evidence of continued education &amp; training</li><li>3-12 months experience in production</li></ul>

Responsibilities: <ul><li>Design part and assemblies to meet mechanical and environmental requirements while embodying the most cost-effective solutions possible.&nbsp;</li><li>Ensure designs implement proper technologies while meeting manufacturing, cost, and timing goals.</li><li>Work directly with customers, and internal teams to identify requirements, establish design expectations, and meet agreed upon design, performance, and goals for projects.</li><li>Maintain project timelines to ensure all key deliverables are met.</li><li>Coordinate activities to accomplish prototype and pilot production runs to mature the design of components and assemblies and meet customer needs for finished material.</li><li>Coordinate project activities to ensure smooth release of products into manufacturing meeting customer requirements and established timelines.</li><li>Perform risk assessment tests and use results to improve design and reduce risks before reaching manufacturing.</li><li>Maintain leading-edge technical proficiency and stay abreast of new trends and scientific developments in fields affecting the mechanical sciences.</li><li>Product testing/ qualification to ensure meeting product requirements &amp; write technical reports on significant findings.</li><li>Work with departments in obtaining samples and test data and provide with information to prepare datasheet/ customer drawing.</li></ul> Requirements: <ul><li>Bachelor’s degree on Mechanical Engineering or equivalent discipline.</li><li>At least 5 years of work experience in a product design.&nbsp;&nbsp;</li><li>Antenna or RF experience a plus.</li><li>Capable of manipulating CAD modeling tools, Creo preferred.</li><li>Creo/ANSYS Simulation experience is a plus.</li><li>PDM Windchill experience will be added advantage.</li><li>A solid understanding of mechanical designs including GD&amp;T, structural mechanics and manufacturing process on sheet metal stamping, injection molding, die casting, printed circuit boards and assembly.</li><li>SixSigma methodologies or other strong data analytics background is a PLUS</li><li>Good verbal and written communication skills in English.</li><li>Works well in a Team environment.</li><li>Ability to work in a global environment, able to collaborate with individuals across geographies.</li><li>Complete technical documents, including design specification, test report, engineering presentation.</li><li>Proficiency in Excel and Powerpoint.</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment.</li><li>Troubleshoot equipment failures and repair as needed.</li><li>Perform specified preventative maintenance on production equipment to prevent equipment down-time.</li><li>Perform Lock Out / Tag Out requirements.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li><li>Analyze and improve existing products, equipment, processes as assigned.</li><li>Develop manufacturing methods and processes in the production of components and methods to reduce manufacturing costs.</li><li>Investigate, establish and implement requirements for equipment, tooling, and methods of manufacturing.</li><li>Participate in cost reduction and cost of quality programs.</li><li>Assist manufacturing engineer in solving production constraints.</li><li>Support production through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention.</li></ul> Requirements: <ul><li>Good communication skills, both oral and written.</li><li>Ability to work independently.</li><li>Working knowledge of Microsoft Windows.</li><li>Must have good or corrected eyesight to ensure quality of work.</li><li>Strong practical technical ability.</li><li>Good mechanical aptitude and troubleshooting ability.</li><li>Ability to work in a fast-paced environment.</li><li>Associate Diploma in a technical discipline or equivalent experience.</li><li>1+ years experience in injection molding maintenance, or mechanical, hydraulic, pneumatic and electrical repair.</li></ul>

Skills

Industry

Location

Jobtitle

7 perai Jobs found

Staff Quality & Reliability Engineer

NPD Strategic Sourcing Analyst

Senior Manufacturing Engineer

Manufacturing Technician V (Senior Technician)

Manufacturing Team Leader

Senior Product Development Engineer (Mechanical Design)

Manufacturing Technician V (Senior Technician)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

7 perai Jobs found

Staff Quality & Reliability Engineer

NPD Strategic Sourcing Analyst

Senior Manufacturing Engineer

Manufacturing Technician V (Senior Technician)

Manufacturing Team Leader

Senior Product Development Engineer (Mechanical Design)

Manufacturing Technician V (Senior Technician)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.