Development Engineer (Product Quality) 

Process Engineering Manager

Quality Manager

Manager II – Manufacturing & Process Development Engineering

Senior Product Development Engineer

Supervisor Assembly III

Software Engineer In Test (SDET)

R&D Product Development Engineer II

Senior Product Analyst

Mechatronics Engineer

Responsibilities: Customer Quality &amp; Technical Ownership: <ul><li>Act as the primary technical experts working closely with GQM, KQM, FSE, and internal stakeholders.</li><li>Lead customer complaint investigations, including root cause analysis using structured methodologies (e.g. 5 Whys, Fishbone, 8D), and ensure effective corrective and preventive actions (CAPA).</li><li>Ensure high-quality failure analysis (FA) reports supported by strong technical justification; challenge and close invalid or non-reproducible cases with data-driven rationale.</li><li>Drive fast response, structured escalation, and effective containment actions to improve response time and customer confidence.</li><li>Clearly translate customer complaints into technical, reliability, and risk-based problem statements.</li><li>Review customer quality documentation, including FAI, First Lot Approval, control plans, and inspection reports.</li><li>Ensure out-of-control situations are managed effectively through well-defined OCAPs, including timely containment and recovery actions.</li><li>Maintain high standards for 8D reports and monitor closure turnaround time to meet customer expectations.</li><li>Support regular customer quality reviews and maintain strong working relationships with key customer contacts.</li><li>Initiate internal technical quality improvement initiatives based on customer feedback, field failure data, and risk analysis.</li><li>Strengthen decision-making by identifying the most pragmatic solutions through cross-functional analysis of design, process, and supplier factors.</li></ul> Engineering &amp; Product Quality Assurance: <ul><li>Maintain strong product knowledge covering design intent, materials, machining, assembly, and related manufacturing processes.</li><li>Act as technical authority during escalations, challenging design or process decisions based on field data, reliability risk, and customer impact.</li><li>Support failure analysis and laboratory activities; convert findings into concrete design, process, or control improvements.</li><li>Serve as the link between field failures and design robustness, ensuring lessons learned are embedded into future products and updates.</li></ul> New Product Introduction &amp; Change Management: <ul><li>Participate in NPI and engineering change control processes to ensure customer quality, CTQ, and Copy Exact compliance.</li><li>Ensure customized or newly developed products fully meet customer specifications, quality standards, and regulatory requirements.</li><li>Provide engineering inputs for design reviews, DFMEA/DFMA, and quality guidelines from a customer and field reliability perspective.</li></ul> Culture &amp; Way of Working: <ul><li>Embody and promote company values: Integrity, Teamwork, Customer Centricity, and Innovation.</li><li>Foster a preventive mindset and risk-based thinking across engineering and quality activities.</li><li>Engage cross-functional teams with a clear focus on long-term product excellence and customer success.</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical, Mechatronics, Manufacturing Engineering, or related field.</li><li>5–10+ years’ experience in customer quality, product engineering, or industrialization within high-mix, precision manufacturing (semiconductor equipment preferred).</li><li>Strong ability to read and interpret drawings, GD&amp;T, simulations, specifications, and tolerance concepts.</li><li>Hands-on experience with 8D, 5 Whys, Ishikawa, DFMEA/PFMEA, DFMA, SPC, MSA, DOE.</li><li>Strong analytical, system-level, and reliability-focused thinking.</li><li>Ability to challenge technical decisions fact-based and constructively.</li><li>Strong communication skills in English, including customer-facing and executive-level discussions.</li><li>Strong command of English for global-level communication. Proficiency in Mandarin Chinese (for Chinese customer interaction) and Malay (for shop-floor communication) is highly advantageous.</li></ul>

Responsibilities: <ul><li>Own and lead the process engineering function for cleanroom assembly, end-of-line test and pre-packing, ensuring safe, compliant and capable processes that meet cost, quality, safety and delivery targets.</li><li>Define department objectives, KPI dashboard and governance (e.g., NPI definition and handover lead times, first pass yields, failure rates, quality qppm) and drive execution through standard routines and reviews.</li><li>Lead, coach and develop a team of process engineers / technicians; set clear expectations, provide performance feedback, support competency development and ensure effective succession and talent retention.</li><li>Plan and manage resources (headcount, skills, priorities) to support daily manufacturing needs, escalations, and strategic projects; balance workload across product series and value streams.</li><li>Own process engineering deliverables for NPI or transfer projects: feasibility, process concept, capacity planning, industrialization roadmap, and readiness reviews to ensure on-time SOP.</li><li>Lead cross-functional collaboration with Product Design, Quality, Production, Maintenance, Supply Chain and global counterparts to deliver robust processes supported by Design for Manufacturing / Assembly / Test (DFM / DFA / DFT) improvements.</li><li>Own the strategy and budget for process equipment, tools, fixtures, testers and workstations; approve specifications, manage procurement, acceptance, validation and release to production.</li><li>Drive continuous improvement programs (CIP / Darwin) to improve throughput, cycle time, productivity and cost; support CIP events and ensure sustained gains through standardization.</li><li>Ensure effective utilization of PFMEA and other quality tools to manage and mitigate quality risks during process development, acceptance and production release.</li><li>Develop engineering procedures to govern end-to-end process engineering activities across process design, definition, industrialization, handover, sustainment and continuous improvements.&nbsp;</li><li>Ensure upkeep of process work instructions in D365 via Process Control System as per global standards, including revisioning control based on valid change management procedures.</li><li>Ensure robust management of engineering changes (ECR), process changes and deviations, including impact assessment, validation and controlled implementation.</li><li>Own 8D problem-solving governance for process-related issues, ensure timely root-cause containment / corrective and preventive actions, lessons learned, and clear communication to stakeholders.</li><li>Drive safety, ergonomics and regulatory / ISO compliance for process engineering scope; ensure safe equipment and process design through risk assessments.</li><li>Drive the sustainable deployment of state-of-the-art engineering solutions on the assembly shop floor to enhance quality control through robust error-proofing (poka‑yoke) mechanisms and digitalizations.</li><li>Act as the site focal point to align with global and process engineering counterparts on technology roadmaps, best practices and standardization.</li><li>Manage departmental reporting, change control and communication: provide clear status updates, risks and mitigation plans to operations and leadership.</li><li>Support ad hoc tasks as assigned by superior.</li></ul> Requirements: <ul><li>8–12+ years’ experience in manufacturing/precision mechanical assembly (high-mix preferred), with demonstrated ownership of end-to-end process engineering (process development/industrialization, cleaning / helium leak testing, and controlled-environment or cleanroom assembly where applicable).</li><li>Bachelor’s/Master’s degree in Mechanical, Manufacturing, Industrial Engineering or equivalent; formal training in Lean/Six Sigma and structured problem solving will be added advantage.</li><li>Proven people leadership experience (hiring, coaching, performance management) with the ability to lead technical teams and influence cross-functional stakeholders to deliver manufacturing results.</li><li>Strong written and spoken English communication skills, including the ability to produce clear technical documentation, present KPI performance, and communicate risks / mitigation to leadership.</li><li>Strong understanding of mechanical / pneumatic / electromechanical systems, process equipment and tooling, with experience defining specifications, commissioning, qualification / validation and release to production.</li><li>Demonstrated ownership and governance mindset - sets clear standards, drives disciplined execution, and maintains strong internal / external customer focus.</li><li>Strong prioritization, planning and project management skills to manage multiple workstreams (daily support, escalations, NPI, CIP) under tight timelines and resource constraints.</li><li>Strong technical acumen in quality planning processes especially in definition of process controls based on PFMEA.</li><li>Data-driven operational leadership: builds KPI dashboards, drives root-cause problem solving (8D / A3), and delivers sustained improvements in yield, throughput / cycle time and qppm.</li><li>Strong stakeholder management and change leadership - able to drive alignment across Production, Quality, Maintenance, Supply Chain and global counterparts; comfortable leading reviews and escalations.</li></ul>

Responsibilities: <ul><li>Drive quality performance during rapid production ramp-up</li><li>Lead containment actions and 8D corrective action activities</li><li>Build and maintain strong quality gates and inspection processes</li><li>Improve yield, reduce defects, and enhance customer satisfaction</li><li>Partner with Operations, Engineering, Program, Supply Chain, and Production teams</li><li>Promote early escalation, data-driven problem solving, and continuous improvement</li><li>Monitor quality metrics and drive corrective/preventive actions</li><li>Support manufacturing readiness and process compliance</li></ul> Lead the site Quality organization covering: <ul><li>Product Quality</li><li>Signal Integrity Quality</li><li>Incoming Quality</li><li>Quality Engineering</li><li>Quality Management System</li><li>Customer quality and corrective action</li><li>Work closely with regional quality leaders, regional manufacturing counterparts, and key stakeholders</li></ul> Requirements: <ul><li>Manufacturing quality leadership experience</li><li>Electronics, cable assembly, connector, EMS, automotive electronics, or high-precision manufacturing background</li><li>Knowledge of 8D, FMEA, Control Plan, SPC, MSA, CAPA, Pareto, and audit management</li><li>Exposure to signal integrity, high-speed interconnect, RF, test engineering, or data center hardware will be an added advantage</li><li>Experience working in a multinational and fast-paced ramp environment</li></ul>

Responsibilities: Lead a team of engineers who will: <ul><li>Develop power connector assembly manufacturing process in accordance with LEANPD product development.</li><li>Drive for excellence in existing manufacturing technologies and methods.</li><li>Strive to implement new manufacturing technologies to provide improved process and tolerance control.</li><li>Support Product Development in the optimization designs (DFM) and piece parts for manufacturability; realizes sample tooling, product samples, and prototypes.</li><li>Design, develop, and qualify tooling and processes to meet company DDN quality and production standards.</li><li>Support the supply chain to verify supplier compliance and capability.</li><li>Act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Maintain communication with the project management team to understand current and future strategic business needs</li><li>Prioritize and time manage a portfolio of projects/work efforts based on criticality and business need</li><li>Provide readouts to Senior manager and Director-level cross-functional management as necessary</li><li>Work with the Philippines operations team to assign resources necessary for the successful execution of new product development</li><li>Facilitate and coordinate cross-functional communication across globally matrixed organizations</li></ul> Requirements: <ul><li>Bachelors or above degree with mechanical/electrical related majors.</li><li>At least 5 years of managerial-level experience related to a multinational manufacturing site.</li><li>Familiar with Lean, Six Sigma. etc. industrial methods/tools.</li><li>With 2 years or above work experience in the connector assembly industry is preferred.</li><li>Fluent in English and good presentation skills.</li><li>Familiar with MS software.</li><li>Familiar with industrial specification (i.e., IPC 620).</li><li>Familiar with Stamping / Plating / Molding / Assembly processes</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Role Description: <ul><li>Plans and establishes production work schedule to meet delivery times and best utilize company production capacity.</li><li>Initiate work orders and ensure that all products are produced to the specified specifications and ensure conformance to the schedule.</li><li>To manage the shift and all direct staff to ensure the smooth running of the production process, complying with the company’s Health and Safety procedures.</li></ul> Responsibilities:&nbsp; <ul><li>Plan, schedule, and manage production workflows to meet delivery timelines while ensuring all products conform to required specifications.</li><li>Supervise and lead shift teams, ensuring smooth production operations and strict adherence to all Health &amp; Safety guidelines within the plant.</li><li>Oversee material and production planning, including initiating work orders, maintaining inventory accuracy, and participating in stockroom and physical inventory processes.</li><li>Drive operational excellence through continuous improvement, supporting initiatives such as our client /Kaizen to enhance efficiency, quality, and overall production performance.</li></ul> Requirements: Leadership Experience:&nbsp; <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul> Project Experience:&nbsp; <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer customer-centric approach and adherence to customer expectations to promote a positive company image.</li><li>Play an active role in the our client plan/Kaizen initiative to achieve plans for future growth within the company.&nbsp;&nbsp;</li></ul> Education: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer.&nbsp;</li></ul> Other Requirements:&nbsp; <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.&nbsp;</li></ul>

Responsibilities: <ul><li>Framework Development: Contribute to, maintain and enhance the test automation framework by adding new capabilities and improving maintainability.</li><li>Ensure the framework supports scalability, modularity, and cross-platform compatibility.</li><li>Be ready to jump into unknown areas and quickly implement the most suitable solutions.</li><li>Test Script Development: Design, develop, and maintain robust and reusable test automation scripts.</li><li>Work with different application layers: UI, API, database, and possibly mobile or desktop apps. Implement and maintain utilities and test libraries.</li><li>If required support developers with unit tests.</li><li>Test Strategy &amp; Planning: Collaborate with QA leads and developers to define what to automate, when, and how.</li><li>Ensure test automation is integrated in the CI/CD pipeline and supports continuous testing.</li><li>Test Execution &amp; Maintenance: Regularly run automated tests and analyze results. Identify and troubleshoot test failures, escalating issues when needed. Maintain and update existing test cases and CI/CD pipelines as applications evolve.</li><li>Troubleshooting &amp; Debugging: Investigate test failures and identify root causes— whether it’s a test issue, application defect, or environment problem.</li><li>Provide quick and effective fixes or workarounds.</li><li>Collaboration &amp; Mentorship: Collaborate with developers, QA engineers, DevOps, and product owners to ensure alignment on testing objectives.</li><li>Mentor junior team members on automation best practices and tool usage.</li><li>Code Quality &amp; Version Control: Write clean, maintainable, and efficient automation code. Perform code reviews for junior engineers and provide constructive feedback. Ensure adherence to automation coding standards and version control practices.</li><li>Test Data &amp; Environment Handling: Set up or manage basic test data for automated runs. Run tests across different environments and report inconsistencies.</li><li>Documentation: Document automated tests and provide clear test case descriptions.</li><li>Keep test coverage and automation status updated in tracking tools like Jira, TestRail, or similar.</li></ul> Requirements: <ul><li>Experience &amp; Expertise: Excellent coding skill in Python, JavaScript is a plus.</li><li>Proven experience in building test framework, application development and building applications, working with git.</li><li>Solid experience with API automation testing, microservices solutions, setting up CI/CD pipelines in Azure DevOps or similar.</li><li>Great experience with Docker or similar.</li><li>Agile methodology: Experience in working in an Agile environment and comfortable in dynamic settings and requirements.</li><li>You thrive as fast-paced and are an independent contributor with no support required to drive assigned tasks forward with precision and efficiency.</li><li>Communication &amp; Collaboration: Proficient in cross-functional communication with a demonstrated ability to facilitate team communication and knowledge sharing sessions.</li><li>Technical Proficiency: Hands-on experience with latest development tools and processes, DevOps practices and Cloud solutions like Azure, AWS or similar, Robot Framework, Selenium Grid and reporting tools like Grafana, Report Portal or similar.&nbsp;</li><li>Continuous Improvement: Proactively identify areas for automation improvement or technical debt reduction.</li><li>Stay current with industry trends, tools, and emerging practices.</li><li>Educational Background: A Bachelors degree in Computer Science, Engineering, or a related field, or equivalent practical experience.</li></ul>

Responsibilities: <ul><li>Design &amp; Development of automotive products like Connectors, Header, Terminals, Automotive components.&nbsp;</li><li>Interact directly with customers / Sales and Marketing team to identify key Product Technical requirements / deliverables and establish product specifications to fulfil customer requirements in handling new concepts / quotations.</li><li>To lead and drive complex new product development products starting from concepts generation, DFMEA, DFM/DFA, prototyping &amp; testing.</li><li>To generate 3D CAD models &amp; 2D drawings in PTC Creo for Connector, Terminal, Header &amp; other auto components.&nbsp;</li><li>Responsible for creating test specifications, deciding test methods, DVP Preparations &amp; testing and validation.</li></ul> Requirements: <ul><li>B.E (Mechanical)</li><li>Minimum 2 to 9 years of hands-on experience in automotive plastic components development (preferably Connectors).</li><li>Good Experience in Product validation and testing (DV / PV) of automotive products.</li><li>Exposure to manufacturing processes like Injection molding, stamping, Manufacturing and assembly etc.</li><li>Exposure to APQP &amp; PPAP activities.</li><li>Exposure to Design review processes like DFEMA / DFA / DFM / FEA etc.,</li><li>Exposure to IATF 16949 / TS 16949.</li><li>Problem solving and critical thinking.</li><li>Good CAD Modelling skills (Pro-E / Creo), AutoCAD.</li><li>Strong 2D drawing drafting skills.</li><li>Good working knowledge on GD&amp;T &amp; Tolerance Stack up analysis.</li></ul>

Responsibilities: <ul><li>Elicit, analyze, and translate user needs into detailed, actionable requirements for the pod</li><li>Define and manage use cases, user stories, process flows, and visualizations to support development</li><li>Partner with design and engineering to explain functional requirements and continuously improve user experience</li><li>Maintain a backlog that stays 2–3 sprints ahead, ensuring clear Definitions of Ready and Done for all features</li><li>Communicate product vision and requirements effectively to developers, testers, and stakeholders</li><li>Support User Acceptance Testing by writing UAT scripts and participating in testing cycles as needed</li><li>Document confirmed business processes to serve as reference for development and IT support teams</li><li>Apply business process improvement methodologies to optimize workflows and system efficiency</li><li>Collaborate closely with the Product Manager to ensure backlog priorities align with business objectives</li><li>Track delivery metrics and build reports to measure progress, quality, and outcomes</li><li>Manage cross-pod dependencies in partnership with the Technical Product Manager</li><li>Ensure compliance with applicable standards by maintaining SDLC documentation, system configurations, and audit artifacts</li><li>Maintain a strong understanding of the IT application portfolio, developing deep expertise in specific products or BPM domains</li><li>Support and facilitate system demonstrations, including Inspect &amp; Adapt workshops, as required</li></ul> Requirements: <ul><li>Proven knowledge and understanding of standard practices, technology and supporting industry principles</li><li>Experience gathering requirements and translating into a product vision by leveraging their expertise in product development, engineering and UX</li><li>Deep understanding of business/processes and high-level understanding of high-quality digital product delivery</li><li>Experienced in managing a product backlog/release plan, tracking team level metrics, attend product team ceremonies, removing blockers (burndown chart, release burn up, etc.)</li><li>Experienced in developing systems and tools to enable customer interactions and collaboration (e.g., digital self, precision marketing, DAM, immersive technology)</li></ul>

Role Description: <ul><li>The Position has been created to lead a team of Mechanical Designers, Electrical Automation Engineers and Technicians of the Operations team to define the process and build the machines needed to make the new products in line with the strategy map and market demand.</li></ul> Responsibilities: <ul><li>Responsible for working with a team of engineers for new project launches. Coordination with different technology leads connected with new projects. Collaborating with ME, OPS, AQE, NPI and PLTL team for execution of all new projects as per agreed APQP timelines.</li><li>Responsible for execution of PLTL projects and adherence to launch sheet requirements.</li><li>End to End responsible for capturing the voice of Customers and All Stakeholder requirements of the product to meet the expectations</li><li>Act as a purposeful bridge between ME and operations.</li><li>Work closely with project management and NPI procurement for capacity and streamlined supplies&nbsp;</li><li>Identify safety, quality and cost saving opportunities on new and existing projects.</li></ul> Requirements: <ul><li>Technical Degree/Diploma in Mechatronics - NTTF/BE</li><li>Hands own experience assembly of machines and troubleshooting</li><li>1 to 4+ years of experience working in medium or large matrix organizations.&nbsp;</li><li>Hands on Experience in designing and building Complex and high precision machines, high accuracy assembly automation machines for Automotive or electronics industries</li><li>Experience in Robot programming.</li><li>Vision inspection and testing machines like leakage testers and electrical testers experience&nbsp;</li><li>PLC and HMI Programming, Servo programming and tuning, and trouble shooting</li><li>Updated knowledge on current Programming Software and Design Software.</li></ul>

Skills

Industry

Location

Jobtitle

35 precision stamping Jobs found

Development Engineer (Product Quality)

Process Engineering Manager

Quality Manager

Manager II – Manufacturing & Process Development Engineering

Senior Product Development Engineer

Supervisor Assembly III

Software Engineer In Test (SDET)

R&D Product Development Engineer II

Senior Product Analyst

Mechatronics Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

35 precision stamping Jobs found

Development Engineer (Product Quality)

Process Engineering Manager

Quality Manager

Manager II – Manufacturing & Process Development Engineering

Senior Product Development Engineer

Supervisor Assembly III

Software Engineer In Test (SDET)

R&D Product Development Engineer II

Senior Product Analyst

Mechatronics Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.