Quality Technician

Quality Associate I

Salesforce Developer

Continuous Improvement Analyst III

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

Talent Acquisition Specialist

Chief Executive Officer - Steel Industry

Equipment Engr - Automation and PLC

Responsibilities: <ul><li>Ensuring products meet internal and external customer requirements.</li><li>Performing regular inspections and tests on raw materials, in-process components, and finished products using measurement equipment (e.g., calipers, micrometers, and gauges).</li><li>Recording inspection results and maintaining detailed quality documentation.</li><li>Identifying defects and reporting findings to supervisors or engineers.</li><li>Assisting Quality Engineers in resolving quality issues within the production operation.</li><li>Supporting root cause analysis and corrective action activities.</li><li>Complying with Health, Safety, and Environmental Policies.</li><li>Contributing to continuous improvement activities and initiatives.</li><li>Writing reports and providing data to management.&nbsp;</li></ul> Requirements: <ul><li>Experience as an Inspection or Quality Technician.</li><li>Understanding of engineering drawings and quality management systems (e.g., ISO9000, TS16949, ISO 17025).</li><li>Knowledge of statistical tools (e.g., Minitab) and data analysis.</li><li>Strong attention to detail, analytical, and problem-solving skills.</li><li>Ability to interpret technical information and work with minimal supervision.&nbsp;</li></ul>

Responsibilities: <ul><li>Provide daily quality oversight during manufacturing, warehousing, and qualification activities, including but not limited to line clearance and AQL sampling.</li><li>Ensure adherence to cGMP, SOPs, and regulatory standards.</li><li>Lead and execute QA review of batch records, logbooks, and related GMP documentation to support timely and accurate product disposition.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing QA support responsibilities</li><li>Ensure proper execution of Good Documentation Practices (GDP)and data integrity in all manufacturing executed records.</li><li>Take active role in preparing the site for regulatory inspection.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits.</li><li>Contribute to the inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications / Experience <ul><li>Bachelor’s degree in a scientific or technical discipline (e.g., Biology, Chemistry, Pharmacy, Engineering).</li><li>5+ years of experience in pharmaceutical manufacturing, or QA.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills / Competencies <ul><li>Strong knowledge of 21 CFR part 10, and 211.</li><li>Strong knowledge of aseptic GMP manufacturing and QA shopfloor support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, and engineering.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities <ul><li>Collaborate with Product Managers and cross-functional teams to understand business requirements and translate them into technical solutions on the Salesforce platform.</li><li>Design, develop, and implement custom Lightning Web Components (LWC) on the client-side and leveraging object-oriented design principles and best practices for back-end.</li><li>Create and maintain Apex classes, triggers, and other Salesforce development artifacts.</li><li>Customize and extend standard Salesforce functionality to meet unique business needs.</li><li>Troubleshoot and resolve issues for our Salesforce end users while identifying any root cause problems to prevent future issues.</li><li>Develop, maintain, and extend integrations built on the Force.com platform.</li><li>Collaborate with front-end components to integrate Salesforce applications with external systems and web services.</li><li>Perform unit testing, code reviews, and participate in the overall quality assurance process.</li><li>Apply solid understanding and working knowledge of modern JavaScript for Lightning Web Components to solve for complex business needs.</li></ul> Requirements: <ul><li>Bachelor’s degree in Computer Science, Information Technology, Information Systems or related field</li><li>Salesforce Certified (e.g., Platform Developer I, Platform Developer II, JavaScript)</li><li>2+ years of experience with SF Command Line tooling, Git, and VS Code</li><li>2+ years of experience with Apex, Visualforce, and other Salesforce development technologies</li><li>2+ years of Proven experience as a Salesforce Developer with a focus on Lightning Web Components (LWC)</li><li>3+ years of experience and strong proficiency in object-oriented design principles and hands-on experience in applying them to Salesforce development.</li></ul>

Responsibilities: <ul><li>Facilitate, lead, or coach Kaizen and Kaizen events across the organization.</li><li>Work collaboratively with tool or element owners to implement Continuous Improvement tools.</li><li>Lead and audit Continuous Improvement tools.</li><li>Train teams in Continuous Improvement methodologies, tools, and transformation methods (e.g., 5S, TPM, Value Stream Mapping, VSM-D, CCF, 3P, Lean Manufacturing).</li><li>Facilitate and train teams for transformation Kaizen events in highly impactful areas or production cells.</li><li>Obtain internal certifications such as Novice, Apprentice, and Practitioner level in Continuous Improvement.</li><li>Provide coaching to Novice and Apprentice practitioners.</li><li>Train and coach teams on plant Key Performance Indicators (KPIs).</li><li>Report periodic progress on assigned tools, metrics, and initiatives.</li><li>Conduct capacity analysis and mentor production supervisors on managing line capacity.</li><li>Develop scenarios for capacity planning, including footprint analysis.</li><li>Apply advanced knowledge in line balancing and its implications for realistic planning (cross-training, validations, capacity planning, hiring requirements, etc.).</li></ul> Requirements: Knowledge &amp; Experience <ul><li>Bachelor’s Degree in Industrial Engineering or related field.</li><li>3–5 years of experience in continuous improvement, cost savings, or productivity improvement roles.</li><li>Lean certification required.</li><li>Green Belt or Black Belt certification is desirable.</li><li>Experience in process improvement, Six Sigma, and product/process qualification and validation.</li><li>Bilingual (English/Spanish).</li></ul> Skills <ul><li>Proficiency in Microsoft Office 365.</li><li>Strong skills in Excel (Pivot Tables, Charts, Macros), PowerPoint, MS Project, AutoCAD (or similar), Minitab, and simulation software.</li><li>Knowledge of problem-solving techniques.</li><li>Basic competency in creating dashboards using Power BI.</li><li>Basic knowledge of Power Automate or similar tools.</li><li>Ability to work under pressure with strong communication and teamwork skills.</li><li>Experience influencing all organizational levels to support an Operational Excellence culture.</li></ul>

Responsibilities: <ul><li>Lead a dedicated team of engineers and technicians within the Projects or Manufacturing group.</li><li>Ensure that engineers are fully integrated into the overall project team and production support activities.</li><li>Plan and implement training and development programs for direct reports.</li><li>Complete process design and development projects by training and guiding technicians.</li><li>Provide coaching and mentorship to team members.</li><li>Establish engineering goals and objectives aligned with business plans.</li><li>Identify and implement effective, permanent technical and system solutions to problems.</li><li>Consistently meet customer requirements, performance expectations, and deadlines.</li><li>Prepare product and process reports by collecting, analyzing, and summarizing information and trends.</li><li>Champion compliance with internal systems and processes.</li><li>Identify and develop improvements to enhance Service, Delivery, Quality, and Cost metrics using Lean/Six Sigma methodologies.</li><li>Research advanced process technologies and evaluate potential competitive advantages and cost benefits.</li><li>Lead or guide a portfolio of engineering projects in collaboration with cross-functional teams (e.g., NPI, quality engineering, design assurance, R&amp;D).</li><li>Collaborate with teams to plan, coordinate, and implement activities supporting the successful launch of new products, including make/buy analysis, new process introduction, and more.</li><li>Develop or modify manufacturing processes by studying product requirements and designing, modifying, or testing manufacturing methods and equipment.</li><li>Maintain professional and technical knowledge through workshops, publications, networking, and participation in professional societies.</li><li>Manage external relationships with key technology suppliers.</li><li>Oversee workload distribution among engineers and technicians to meet operational and business priorities.</li></ul>&nbsp;Requirements: Education &amp; Experience <ul><li>Bachelor’s degree or equivalent in an Engineering field with 5–10 years of experience in a demanding high-volume production environment or a high-mix, low-volume environment.</li><li>Experience in medical devices or similar regulated manufacturing and quality systems is essential.</li><li>Proficiency with CAD tools; SolidWorks preferred.</li><li>Experience using Minitab, MS Project, and advanced Excel.</li><li>Demonstrated ability to lead a production-focused team, drive technical problem solving, and manage line setup including equipment acquisition and process development.</li><li>Working knowledge of Lean and/or Six Sigma engineering principles with proven results.</li><li>Statistical knowledge, including data analysis and statistical software (JMP, Minitab, etc.).</li><li>Lean Six Sigma Green Belt certification preferred.</li><li>Excellent communication, planning, and organizational skills.</li><li>Self-motivated with strong decision-making abilities.</li><li>Willingness to work independently and to take on an international assignment of up to 3 months.</li><li>Fluent in English (written and verbal), &gt;80% proficiency.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills / Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience&nbsp; <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Manage the recruitment process end to end</li><li>Keep an overview of our recruitment needs via regular meetings with our Hiring Managers</li><li>Verify job descriptions with the hiring manager and design interview questions that reflect the positions requirements and attract talents to the company</li><li>Determining selection criteria for the open positions, in line with the organizations-culture and strategy</li><li>Sourcing of potential candidates through different sourcing channels</li><li>Screening of potential candidates and planning interviews and assessments</li><li>Run regular updates to hiring managers</li><li>Engaging with Senior Stakeholders</li><li>Organize and lead feedback sessions and coordinate the hiring decision</li><li>Propose employment offers in line with the company guidelines</li><li>Ensure that the recruitment process is efficient, effective and equitable</li><li>Foster long-term relationships with candidates</li><li>Designed and implemented innovative TA strategies for effective candidate sourcing</li><li>Developed strategic staffing plans aligned with business priorities</li></ul> Requirements: <ul><li>Minimum 7 year’s experience in recruiting for manufacturing or niche hiring along with commercial hiring.</li><li>Must have experience in recruitment metrics and analytics</li><li>Able to perform as an individual contributor and be hands-on</li><li>Well versed in social media, resume databases and professional networks</li><li>Experience with headhunting for mid-level positions</li><li>Hands-on experience with full-cycle recruiting using interview techniques</li><li>Good interpersonal and influencing skills. Has the ability to engage senior stakeholders.</li><li>Has a strong passion and desire to make a difference</li><li>Growth mindset and learning agility</li><li>Should have a recognized Masters / Bachelors degree</li><li>Proficient MS Excel</li></ul>

Responsibilities:&nbsp; Strategic &amp; Financial Leadership <ul><li>Identify growth avenues including capacity expansion, new product lines (TMT grades, wire rods, structural steel), and new geographies.</li><li>Lead annual business planning and budgeting in alignment with the Board’s goals.</li></ul> Operational Excellence <ul><li>Oversee end-to-end plant operations including melting, rolling mill operations, quality control, logistics, and dispatch.</li><li>Drive productivity improvements, yield optimisation, and equipment uptime using best industry practices.</li><li>Ensure strict adherence to quality standards such as BIS norms for TMT bars (Fe500D, Fe550D, etc.).</li><li>Implement safety, statutory compliance, and sustainability practices across all units.</li></ul> Budgeting, Forecasting <ul><li>Develop and implement long-term strategic plans aligned with the company’s vision and market opportunities.</li><li>Monitor production cost elements (raw material sourcing, power &amp; fuel, conversion costs) and lead cost-reduction initiatives.</li></ul> Commercial &amp; Market Leadership <ul><li>Maintain strong relationships with key customers, vendors, and industry stakeholders.</li><li>Build and mentor a high-performing leadership team across production, quality, finance, HR, and marketing.</li><li>Foster a culture of discipline, transparency, accountability, and continuous improvement.</li></ul> Compliance &amp; Risk Management <ul><li>Ensure adherence to all statutory, environmental, and safety regulations related to steel manufacturing.</li></ul> Requirements: <ul><li>B.Tech/B.E. in Metallurgy, Mechanical, Electrical, or related engineering field.</li><li>20+ years in steel/TMT bar manufacturing, with at least 5 years in a senior leadership/CEO/COO role.</li></ul>

Overview: <ul><li>The Equipment Engr - Automation and PLC is responsible for ensuring the reliable performance of production equipment by developing, modifying, and troubleshooting PLC programs and CCD (vision) systems.&nbsp;</li><li>The role supports day-to-day plant operations through automation debugging, sequencing improvements, and real-time issue resolution to enhance productivity and OEE.&nbsp;</li><li>This position leads technical training for technicians and new team members, documents system updates, and contributes to continuous improvement initiatives, including deployment and ISO compliance.&nbsp;</li><li>The engineer serves as a key resource in maintaining stable, efficient, and high-quality automated manufacturing processes.</li></ul> Responsibilities: <ul><li>Trouble shooting, Modify or Create Machine PLC program to suit the need of the plant.</li><li>Responsibel for repair and maintenance of the CCD System of the production line.</li><li>PLC system of the automation debugging and improve the sequencing.</li><li>Suggest improvement of automation PLC program to improve productivity and OEE.</li><li>Train technician to resolve the issues encountered between the production.</li><li>CCD light adjustments to improve the performance.</li><li>Responsible to resolve all issues encounter during production run.&nbsp;</li><li>Support on resolving CCD issues encounter during production run and documenting.&nbsp;&nbsp;</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li></ul> Requirements:&nbsp; <ul><li>Bachelor in Major in Electrical/Electronics</li><li>Preferably Mechanical, Electrical/Electronics and Industrial Engineer,</li><li>5 years minimum experience in the automation assembly and Tooling Design &amp; Development</li></ul> Knowledgeable on this different type of Programming Languages: <ul><li>Ladder Logic</li><li>Function block diagrams</li><li>Structured text</li><li>Sequential flow charts</li><li>Instruction List</li></ul>

Skills

Industry

Location

Jobtitle

128 production line Jobs found

Quality Technician

Quality Associate I

Salesforce Developer

Continuous Improvement Analyst III

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

Talent Acquisition Specialist

Chief Executive Officer - Steel Industry

Equipment Engr - Automation and PLC

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

128 production line Jobs found

Quality Technician

Quality Associate I

Salesforce Developer

Continuous Improvement Analyst III

Senior Manufacturing Engineer

Compounding Technician

Filling Technician

Talent Acquisition Specialist

Chief Executive Officer - Steel Industry

Equipment Engr - Automation and PLC

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.