Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Product Manager

Reference Standard Coordinator

Regional Sales Manager - North Africa

Manufacturing Engineer

Managing Director - Vietnam

Senior Manufacturing Engineer

Job Overview: <ul><li>The Research Associate – II – Nitrosamines is responsible for conducting analytical research, method development, and risk assessment activities focused on nitrosamine impurities in pharmaceutical products.&nbsp;</li><li>The role supports regulatory compliance, safety assessment, and mitigation strategies in line with global regulatory requirements (such as those from the FDA, EMA, WHO, and ICH M7). This position requires a strong understanding of organic chemistry, analytical instrumentation, and impurity profiling.</li></ul> Responsibilities: <ul><li>Development, validation, and transfer of LC/MS methods for quantitative determination of Nitrosamine impurities (Small Molecules and NDSRIs) at ppm to sub-ppb levels</li><li>Design and execution of experiments to identify root causes of Nitrosamine formation and develop mitigation strategies</li><li>Perform chemical extractions of container closure systems and drug product solutions</li><li>Utilize advanced mass spectrometry techniques (LC-MS and GC-MS) for identification and quantification of Nitrosamines</li><li>Prepare technical reports and support documentation for regulatory filings</li><li>Collaborate with subject matter experts, supervisors, and cross-functional teams</li><li>Interpret analytical data, evaluate results, and incorporate findings into project goals</li><li>Maintain compliance with relevant Quality System Regulations and GxP standards</li></ul> Requirements: <ul><li>Experience: 6–10 years in analytical chemistry focused on Nitrosamines</li><li>Education: Master’s degree or equivalent experience; PhD preferred with relevant experience</li><li>Skills Required:</li><li>Proficiency in LCMS/GCMS instrumentation and troubleshooting</li><li>Strong knowledge of Nitrosamine chemistry and analytical techniques</li><li>Experience in method development, validation, and regulatory reporting</li><li>Ability to analyze complex data and draw meaningful conclusions</li><li>Good documentation and technical report writing skills</li></ul>

Role Description: <ul><li>The Manager –ADL, GM P is responsible for leading analytical development activities within a GMP-regulated environment, ensuring robust method development, validation, and transfer for pharmaceutical products.</li><li>This role plays a critical part in supporting product development, regulatory submissions, and commercial manufacturing by providing accurate and compliant analytical data.</li></ul> Responsibilities <ul><li>Lead and manage a team involved in method validation, method transfer, and postproduction studies (Freeze Thaw analysis, Photostability studies, Dilution studies, RLD Characterization, etc.) for 505b(2) and generic ANDAs.</li><li>Troubleshoot and resolve challenges during method validation and method transfer of new products from R&amp;D to manufacturing sites.</li><li>Support regulatory filings and respond to analytical function queries.</li><li>Ensure compliance with cGLP within the ADL GMP function.</li><li>Provide support during quality inspections by regulatory agencies at manufacturing plants.</li><li>Timely closure of LIR, NCR, CCN, CAPA and ensure implementation of corrective and preventive actions.</li><li>Ensure timely compliance with Pharmacopoeia updates.</li><li>Mentor, coach, and develop team members for task execution and personal growth.</li><li>Collaborate with external partners (CRO/CMO) for analytical testing execution.</li><li>Work cross-functionally with project management, regulatory affairs, formulation development, manufacturing, and quality control teams.</li></ul> Requirements: <ul><li>Education: Ph.D. OR MPharm.</li><li>Experience: 3–4 years of team handling experience.</li></ul> Skills Required: <ul><li>Strong knowledge of analytical method validation, method transfer, Pharmacopoeia compliance, cGLP, and documentation practices.</li><li>Sound understanding of analytical techniques with good learning agility.</li><li>Excellent technical writing and computer skills for data recording, protocol/report generation, and presentations.</li><li>Strong coordination, relationship management, and ability to work in multicultural teams.</li><li>Effective communication and team management skills.</li><li>Knowledge of latest quality and regulatory requirements.</li><li>Ability to delegate effectively and take autonomous decisions.</li><li>Critical thinking skills for problem-solving and decision making.</li></ul>

Job Description: <ul><li>The role of a Manager – R&amp;D (Research &amp; Development) F&amp;D (Food &amp; Drink) Emulsions typically involves overseeing the research, development, and innovation of emulsions used in the food and beverage industry.&nbsp;</li><li>The manager leads the R&amp;D team to develop new emulsion-based products or improve existing ones to meet customer requirements, industry standards, and market demands.</li></ul> Responsibilities: Planning of Project technical feasibility experiment: <ul><li>End to end planning for Resource availability on time Planning of developmental trials, PDR studies/QBD additional studies for ANDA products</li><li>Planning of developmental trials, PDR studies/QBD additional studies for ANDA products.</li><li>Monitoring of development trials.</li><li>Compilation of the development data.</li><li>Ensuring development as per QBD approach</li><li>Review the technical documents e.g. DMBD, PDR and other protocols &amp; reports.</li><li>Coordination with CFTs (ADL, IRA, Procurement, Quality) for on time project execution.</li><li>Technology transfer of Drug product [ANDA, 505 (b)(2), Complex injectables]</li><li>Exhibit batch execution [ANDA, 505 (b)(2), Complex injectables]</li><li>Support for Process validation and commercial batches [ANDA, 505 (b)(2), Complex injectables]</li><li>Technology transfer documents review Products developed by CRO as per regulatory requirement.</li><li>Support &amp; coordination with CMOs for successful technology transfer</li><li>Fulfilling the regulatory requirements by designing the trials</li><li>Training &amp; knowledge enhancement of the team</li><li>Design &amp; Authorization of SOPs</li><li>Execution &amp; approval process of New Equipments/Instruments for projects in upcoming portfolio &amp; continuous improvement of Development Lab.</li><li>Adoption of GQP (Procedures integration with systems)</li></ul> Requirements: <ul><li>3–4 years of team handling experience</li><li>3–4 years of hands-on work in emulsions (oil-based and water-based)</li><li>Full product lifecycle exposure: development → scale-up → filing</li><li>Minimum 5–10 regulatory filings (e.g., ANDA, NDA)</li><li>Strong people management and leadership capabilities</li><li>Preferred experience in ophthalmic formulations</li><li>Background in injectable manufacturing environment is an added plus</li></ul>

Role Description: <ul><li>The Product Manager develops and helps execute product-level strategies.</li><li>Strategies will be based on market analysis, company objectives and product profitability, and will include recommendations on market share targets and customer bid tactics.</li><li>This position will also develop forecasts for existing and new products and work cross-functionally with Finance, Sales, Supply Chain, Portfolio Management and Regulatory.</li><li>The role requires having oversight of the commercialized products and near-term launches, providing inputs to long-range business cases and plans, and preparing support documents &amp; analytics for execution of sales activities.</li></ul> Responsibilities: Product Strategy <ul><li>Analyze market landscape using IQVIA and other data sources.</li><li>Recommend market share targets based on current share, # of competitors, cost position, supply capabilities and other factors.</li><li>Maintain product dashboard that provides relevant information to management and cross-functional team.</li></ul> Forecasting &amp; S&amp;OP <ul><li>Update and provide by-sku / by-customer forecasts to Finance and Supply Chain for use in official financial forecasts, incentive comp and supply plan forecasts.</li><li>Calculate and report forecast accuracy and customer award compliance measures.</li><li>Develop new forecasting tools and optimize existing models.</li><li>Support the Sales and Operations Planning (S&amp;OP) process reviews.</li></ul> New Products&nbsp; <ul><li>Co-lead the launch preparation process with the Launch Management team.</li><li>Work closely with Portfolio Management on business cases in order to prioritize launch sequencing and justify development/licensing/acquisition of new products.</li></ul> Other Commercial Operations Support <ul><li>Provide supporting documentation to Sales team such as sell sheets, analysis and other items needed to execute sales tactics.</li><li>Co-ordinate with cross functional team and ensure product information updated on our client portal.</li><li>Work with sales team and consultant to create and maintain VA website login.</li><li>Other items as assigned/identified.</li></ul> Requirements: Education &amp; Experience <ul><li>Bachelor’s degree in business, Finance, Analytics preferred.</li><li>MBA or masters degree in Analytics/Statistics preferred.</li><li>Minimum 3 years of generic pharmaceutical industry experience in inline/pipeline forecasting or Data Analytics.</li><li>Intellectual curiosity to go beyond the numbers/bring strategic ideas and insights.</li><li>Strong technical skills to build analytical tools, leverage secondary data and rollout plans.</li></ul> Knowledge <ul><li>Expert with MS office Suite, primarily MS Excel?Experience with SAP, Salesforce and IQVIA a plus.</li></ul> Skills &amp; Abilities <ul><li>Self-direct activities based on general direction given.</li><li>Handle multiple projects in a fast-paced team environment.</li><li>Identify priorities based on profitability and company objectives.</li><li>Create detailed business analysis, outlining problems, opportunities, and solutions.</li><li>Excellent analytical, mathematical, and creative problem-solving skills</li><li>Collaborate cross-functionally with Sales, Finance and Procurement colleagues to develop, analyze and implement strategic plans that maximize profitability.</li><li>Develop and maintain decision support systems that collect and synthesize sales data into knowledge that drives management decisions including resource allocations, opportunity identification, performance against expectations, and sales incentives.</li><li>Expand knowledge and experience by regular engagement with key stakeholders to understand business processes, policies, strategies and evolving business trends.</li><li>Interact with the team, management, and across departments to communicate changes to both current and proposed forecast changes.</li><li>Provide feedback and follow up communications across organization on any issues or market challenges.</li><li>Closely monitor the changing competitor landscape, turning insights into actionable and appropriate product strategies.</li><li>Review and recommend key products to stimulate profitable sales.</li><li>Ability to perform product profitability analyses and run multiple, complex scenarios and present to management for review/approval.</li><li>Brainstorm both short-term and long-term sales and profitability milestones and goals.</li></ul> Physical Requirements <ul><li>Physical &amp; mental requirements e.g. lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc.</li></ul>

Responsibilities: Sample Management <ul><li>Performs QC reference standard/chromatographic column receipt, processing, distribution for testing and storage.</li><li>Performs QC reference standard reconciliation and disposal.</li><li>Tracks inventory of reference standards in the lab.</li><li>Uses laboratory software for reference standard, chromatographic column management.</li><li>Verifies accuracy of labeling/documentation provided with reference standards.</li><li>Informs QC Coordinator if chemical or reference standard is expired for removal from laboratory area.</li><li>Coordinates, with lab management, in-house qualification of reference standards. Submit samples to the appropriate lab groups for testing.</li><li>Create and maintain reports including quality data trending, informational spreadsheets, laboratory log spreadsheets.</li><li>Compile a list of necessary laboratory supplies specifically reference standards, contacting vendors to obtain quotes.</li><li>Uses the purchasing system to procure reference standards and laboratory supplies.</li><li>Provide status updates to QC management and other departments regarding the status of reference standard inventory.</li><li>Maintain a safe work environment by following standards and procedures and complying with legal regulations.</li></ul> Lab Equipment <ul><li>Maintains, operates equipment and instruments supporting reference standard processing.</li><li>Provides general laboratory support such as routine instrument cleaning/preventative. maintenance, reference standard/sample receiving, chemical inventory, document filing and housekeeping.</li><li>Works with internal resources to maintain lab in an optimal state. Cleans lab working surfaces and disposes of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.</li><li>Under close supervision, learns to troubleshoot basic instrument problems.</li></ul> Investigations <ul><li>Escalates any trends/events to the QC Lab Manager.</li><li>Escalates any reference standard documentation issues to the QC Lab Manager.</li><li>With guidance, participates in OOS/OOT/NOE and other investigations.</li><li>Assists, as and when needed, scientists working in the laboratory.</li><li>May assist in drafting, editing, and reviewing SOPs.</li></ul> Training <ul><li>Maintains assigned training records current and in-compliance.</li><li>May assist in the training of laboratory staff.</li></ul> Compliance <ul><li>Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting.</li><li>Documents accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.</li><li>Follows internal processes related to controlled substances.	continuous.</li></ul> Safety <ul><li>Follows EH&amp;S procedures to ensure a safe work environment.</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS.</li></ul> Requirements: Education &amp; Experience <ul><li>College graduate, preferably in a Science related field.</li><li>Laboratory experience related to sample management preferred.</li></ul> Knowledge <ul><li>Basic knowledge of reference standard/sample management in a laboratory environment.</li><li>Some knowledge of applicable safety and standards guidelines: SOP, cGMP, GLP, DEA regulations and/or MSDS.</li><li>Competency in Microsoft Office Suite.</li><li>Proficiency with computers.</li></ul> Skills &amp; Abilities <ul><li>Ability to display and analyze data in a logical manner.</li><li>Good verbal and written communication skills as well as good computer skills.</li><li>Attention to details and accurate record keeping.</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills.</li><li>Ability to take initiative, set priorities and follow through on assignments.</li></ul> Physical Requirements	 <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel. Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals.</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision.</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.</li></ul>

Responsibilities: Market and customer development assessment <ul><li>Provide market, regulatory, customer and competition landscape: outlook, insights and 5 years forecast&nbsp;</li><li>Conduct research of cigarettes manufacturers in Africa and intelligence on manufacturing production volume and consumptions</li><li>Conduct research of customer products, key buying factors and next best alternatives</li><li>Insights and updates on Sanctions, Regulatory, government intervention e.g. taxation, bans [Content and what it means to Our client]&nbsp;</li><li>Consumer and product research: Conventional cigarettes type [format, brand board, types of tobacco, exports and imports distribution channels]&nbsp;</li><li>Consumer and product research: Reduced Risk Product (RRP) / Next Generation Product (NGP) cigarettes type [format, brand board, types of tobacco, exports and imports distribution channels]&nbsp;</li><li>SWOT analysis</li><li>Sourcing needs: what are the roadblocks and what is require?&nbsp;</li><li>Appetite for new product launches.</li><li>How does the deal work for IMB, BAT who sold their business but has opportunity to reengage after 2/3 years?</li><li>Secure meetings for Our client with targeted customers including Top to Top meeting</li><li>Assess opportunity to work with traders&nbsp;</li><li>Market trend analysis and competitor activity in region</li><li>Effective market and customer reporting</li></ul> Customer Management&nbsp; <ul><li>Comprehensive understanding of customers’ market dynamics, segments and trends</li><li>Co-ordination of sales activity to maximise sales opportunities</li><li>Maintain relationships with customers, prospects and participate in key customer meetings</li><li>Develop support tools and support cross functional to provide customer ease of working&nbsp;</li><li>Customer Strategy, Plan and implementation&nbsp;</li><li>Sustainable customer lifetime growth</li><li>Prepare sales contracts ensuring adherence to law-established rules and guidelines</li><li>Effective and relevant customer meetings</li><li>Annual customer relationship contact plan</li><li>Effective delegation of activity within team</li><li>Cross functional team mapping [between customers and Our client team] and secure cross business engagement</li><li>Ensure thorough and disciplined use of key tools aligned with Our client Ruby framework</li><li>Monthly Performance Dashboard to track progress, with year-end projections and SMART action plans in Opportunity Pipeline Tracker</li><li>Continuous Review of customer performance versus the annual plan and budget with creation of action plans to address under performance</li></ul> Sales Planning and Development&nbsp; <ul><li>Promote Our client value proposition and market presence</li><li>Promote and sell Our client solutions by establishing key contacts and developing relationships with target customers</li><li>Generate new enquiries from existing customers, prospecting of new customers within Africa&nbsp;</li><li>Identify and create new opportunities to deliver growth in revenue and profitability&nbsp;</li><li>Management of sales pipeline through Opportunity Pipeline Tracker</li><li>Create and implement Africa’s 5 years strategy plan</li><li>Delivery of market segmentation matrix</li><li>Longer term product lifecycle considerations [Dual sourcing strategy for existing SKUs, and in-house avoidance]&nbsp;</li><li>Ensure thorough and disciplined use of Opportunity Pipeline Tracker</li><li>Our client solutions [Scientific services included] mapping across customers and market&nbsp;</li><li>Secure innovation session with brand owners and decision makers</li><li>Market trend analysis and competitor activity in region</li><li>Longer term product lifecycle considerations</li><li>Effective market and customer reporting</li><li>Monthly Performance Tracker to track progress</li><li>Accurate forecasting and Monthly reporting&nbsp;</li><li>Tracking performance through Salesforce.com</li></ul> Requirements: <ul><li>Bachelor’s degree in business or equivalent discipline</li><li>At least 10 years of sales and account management experience with a minimum of 5 years prior experience in the tobacco industry (must have)</li><li>Fluent in English (both written and spoken) and nice to have local African languages</li><li>Excellent coordination and communication skills to address internal and external teams</li><li>Ability to travel frequently internationally to meet partners and customers</li><li>Excellent analytical skills; Energetic self-starter possessing self-confidence and maturity&nbsp;</li><li>Very good presentation skills and attention to detail&nbsp;</li><li>Passion for sales and business growth&nbsp;</li><li>Project management skills</li><li>Highly self-motivated, ambitious, resourceful and driven</li><li>Excellent leadership, influencing and listening skills</li><li class="ql-align-justify">Good understanding of business processes, including sales, supply chain and customer service</li></ul>

Responsibilities: <ul><li>Develop, implement, and optimize manufacturing processes to improve efficiency, quality, and cost-effectiveness.</li><li>Provide technical support for new product introduction (NPI), including process design, tooling, and equipment validation.</li><li>Conduct root cause analysis and lead corrective/preventive actions (CAPA) to&nbsp;</li><li>resolve production issues.</li><li>Collaborate with cross-functional teams (R&amp;D, Quality, Supply Chain, Maintenance) to ensure smooth project execution and production readiness.</li><li>Prepare and maintain process documentation, work instructions, and training materials.</li><li>Monitor key production metrics (yield, scrap, cycle time, downtime) and implement continuous improvement initiatives.</li><li>Participate in lean manufacturing, Six Sigma, and Kaizen activities to drive operational excellence.</li><li>Ensure compliance with safety standards, environmental regulations, and ISO/IATF quality system requirements.</li><li>Support cost reduction projects through process improvement, automation, and supplier collaboration.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field.</li><li>3–5 years of relevant experience in manufacturing engineering; automotive or electronics industry experience preferred.</li><li>Strong knowledge of manufacturing processes such as machining, assembly, injection molding, stamping, or PCB assembly (depending on industry).</li><li>Familiarity with APQP, PPAP, FMEA, Control Plan, and other quality tools.</li><li>Proficiency in CAD software (e.g., AutoCAD, SolidWorks, Creo) and MS Office.</li><li>Hands-on experience with Lean Manufacturing and problem-solving methodologies (5Why, 8D, DMAIC).</li><li>Good communication and coordination skills; able to work in cross-functional and multicultural teams.</li><li>English: able to read and write technical documents; spoken English is a plus.</li></ul>

Responsibilities: <ul><li>Provide strategic direction and leadership for the Country creating and maintaining a high performing business, driving execution, engagement and results.</li><li>Establish and oversee budgets, plans, policies, and programs that will effectively implement the business strategies and objectives set by the Regional Management Team.</li><li>Contribute to strategic planning and decision-making at Country management team level to develop and implement a business strategy that aligns with the region/global.</li><li>Develop a team of high competence, engagement and efficiency to ensure sustainable profitability.</li><li>Encourage growth &amp; development; drive best practices and foster company values and culture.</li><li>Drive Country to fully leverage the global scale and scope to achieve business results.</li><li>Anticipate market and environmental trends and implement the necessary changes to exceed customer needs.</li><li>Manage and develop relationships with customers.</li><li>Maintain a strong positive connection with the company’s key stakeholders; particularly governmental and regulatory authorities seeking to shape and influence proactively relevant developments.</li></ul> Requirements: <ul><li>Should have at least 10 to 15 years of experience managing the P&amp;L for a business units / functions and operations.</li><li>A progressive career in MNC, able to appreciate and see the value of working in a matrix set-up.</li><li>A hands-on Country Lead who is commercially and operational sound.</li><li>Customer centric and solution offering mindset.</li><li>Ability to drive change and deliver results through commercial and operations excellence.</li><li>Able to withstand pressure and manage crisis</li></ul>

Responsibilities: <ul><li>Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality</li><li>Develop, validate, and implement manufacturing processes and tooling for new and existing products</li><li>Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability</li><li>Identify root causes of production issues and implement corrective and preventive actions</li><li>Lead Lean Six Sigma and 5S initiatives across the production floor</li><li>Support capacity planning and equipment layout optimization</li><li>Develop and maintain process documentation, work instructions, and standard operating procedures</li><li>Ensure compliance with safety standards, quality systems, and regulatory requirements</li><li>Mentor junior engineers and provide technical guidance to the operations team</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field</li><li>Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization techniques</li><li>Experience with manufacturing tools such as PFMEA, control plans, SPC, and root cause analysis</li><li>Proficient in CAD software and Microsoft Office applications</li><li>Excellent analytical, problem-solving, and communication skills</li><li>Ability to lead cross-functional teams and manage multiple projects</li><li>Experience in the electronics or connectivity components industry is an advantage</li></ul>

Responsibilities:﻿ <ul><li>Lead initiatives that enhance manufacturing efficiency, improve product quality, and support continuous improvement efforts at our manufacturing facility.</li><li>The successful candidate will work closely with cross-functional teams to implement innovative solutions, ensure process stability, and drive productivity across operations. Lead and support process improvement projects to optimize manufacturing efficiency, reduce waste, and improve quality .</li><li>Develop, validate, and implement manufacturing processes and tooling for new and existing products Collaborate with product development, quality, and production teams on new product introduction and design for manufacturability</li><li>Identify root causes of production issues and implement corrective and preventive actions Lead Lean Six Sigma and 5S initiatives across the production floor</li><li>Support capacity planning and equipment layout optimization</li><li>Develop and maintain process documentation, work instructions, and standard operating procedures</li><li>Ensure compliance with safety standards, quality systems, and regulatory requirements</li><li>Mentor junior engineers and provide technical guidance to the operations team</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field</li><li>Minimum 5 years of experience in a manufacturing or industrial engineering role, preferably in a high-mix, low-volume environment.</li><li>Strong knowledge of Lean Manufacturing, Six Sigma, and process optimization</li><li>techniques</li><li>Experience with manufacturing tools such as PFMEA, control plans, SPC, and root</li><li>cause analysis</li><li>Proficient in CAD software and Microsoft Office applications</li><li>Excellent analytical, problem-solving, and communication skills</li><li>Ability to lead cross-functional teams and manage multiple projects</li><li>Experience in the electronics or connectivity components industry is an advantage</li></ul>

Skills

Industry

Location

Jobtitle

60 regulatory readiness Jobs found

Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Product Manager

Reference Standard Coordinator

Regional Sales Manager - North Africa

Manufacturing Engineer

Managing Director - Vietnam

Senior Manufacturing Engineer

Senior Manufacturing Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

60 regulatory readiness Jobs found

Research Associate – II Nitrosamines

Manager – ADL GMP

Manager – R&D F&D Emulsions

Product Manager

Reference Standard Coordinator

Regional Sales Manager - North Africa

Manufacturing Engineer

Managing Director - Vietnam

Senior Manufacturing Engineer

Senior Manufacturing Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.