Manager, Operations

Manager/ AVP – Corporate clients

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Senior Product Development Engineer (Mechanical Design)

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Staff Power Product Development Engineer

Senior Developer (IBM Maximo)

Inventory Analyst

Role Description:&nbsp; <ul><li>The purpose of this job is to oversee the production schedules in accordance with approved production instructions, standard operating procedures, while utilizing cGMP for the preparation of commercial product.</li><li>Monitor and document in a periodic performance review the performance of the production staff. Identify opportunities for process and equipment improvements.</li><li>Mentor staff and set goals and objectives for the production personnel.</li></ul> Responsibilities: <ul><li>Manufacturing Operations Management</li><li>Assure the accurate execution of cGMP/DEA documentation relative to manufacturing and packaging activities.</li><li>Assure the accurate manufacturing of bulk drug product for delivery to primary packaging without deviation.</li><li>Assure the accurate packaging of drug product in approved primary packaging components without deviation</li><li>Assure the accurate sampling of raw material and the packaging of samples for shipment as appropriate to contract testing laboratories.</li><li>Assure the accurate assessment of component inventory and reconciliation.</li><li>Assure staff training requirements are established and complete prior to the performance of process or procedure.</li><li>Assure the accurate performance of basic routine preventive maintenance of equipment and facility cleaning activities by operators.</li><li>Establish performance Goals and Objectives based on facility needs and High Corporate Standards.</li><li>Complete routine performance evaluations of staff, and recommend growth opportunities.</li><li>Assure adherence to established production schedules and monitor production performance as determined by the Plant Director.</li><li>Monitor the general safety of staff and assure safe work practices are followed by all site personnel.</li></ul> Requirements: Education &amp; Experience <ul><li>Undergraduate Degree in Pharmacy, Engineering, or equivalent in training and experience.</li><li>10 years’ experience in a pharmaceutical manufacturing environment.</li><li>Prior cGMP experience in a pharmaceutical production environment is necessary. 3-5 years’ previous supervisory experience required.</li><li>Proficiency in a body of information required for the job e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc.</li></ul> Knowledge&nbsp; <ul><li>Knowledge of workplace health and safety requirements for applicable hazardous substances.</li><li>Must be able to demonstrate a high degree of understanding in the cGMP practices.</li><li>Must be able to demonstrate a high degree of understanding in the controlled drug substance regulations.</li><li>Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc.</li></ul> Skills &amp; Abilities <ul><li>Demonstrate knowledge of the current good manufacturing practices.</li><li>Ability to convey information clearly and concisely to both individuals and groups.</li><li>Ability to troubleshoot manufacturing processes, write investigations and complete documentation.</li><li>Ensure adequate staffing and efficient workflow and provide reports and data on manufacturing activity.</li></ul> Physical Requirements	 <ul><li>This position requires working with or around hazardous substances, and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees.</li><li>Ability to don personal protective equipment, if necessary. Able to walk the production floor.</li><li>This position requires working with or around hazardous substances, and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees.</li><li>Ability to don personal protective equipment, if necessary.</li><li>Able to walk the production floor.</li></ul>

Responsibilities: <ul><li>Preparation of documentation and conduct CDD in a timely manner</li><li>To liaise with Relationship Managers on the required documentation</li><li>Ensure that ongoing CDD reviews are conducted in tandem with internal process and policies</li><li>Ensure data accuracy in systems and documentations</li><li>Extraction of data from worksheets and reports for distribution to respective Business segments for necessary follow-up actions</li><li>Assisting BUs to respond to various CDD enquiries, which may originate from the local authorities or from correspondent banks, over client’s profile</li><li>Perform screening assessment and escalate material hits, where applicable for further clearance.</li><li>Assisting the Team Leader in providing regular statistics and presentations for updating to Senior Management</li><li>Participating in ad-hoc assignments and projects, e.g., audit, user acceptance testing etc. where required</li><li>Providing advisory support to the BUs in CDD related matters, where applicable</li></ul> Requirements:﻿ <ul><li>Degree holder and above</li><li>Detail-oriented, yet able to think flexibly and independently to resolve problems</li><li>Maintaining a high degree of knowledge in MAS 626 regulations and associated regulatory requirements for AML/CFT and Sanctions</li><li>Handling data, and able to perform functions on Excel, such as Vlookup, Pivoting and generating various graphs / charts, etc</li><li>Certification as an AFC specialist (e.g., CAMS / Diploma in AML, Governance and Risk) with a recognized institution will be an advantage</li></ul>&nbsp;

Role Description: <ul><li>Transportation solutions BU makes products for Connecting and Sensing Data, Power and Signal for vehicles ranging from Two wheelers to Heavy Commercial trucks.</li><li>TS India operates out of 2 Manufacturing plants in Pune, Sales offices in Pune, Noida and Chennai and a Global engineering team in Bangalore.</li><li>The total team strength is of 3,500 employees. There is a clear business strategy till 2025 to support the business growth.</li><li>The growth is driven mainly driven from localization of Core India Specific products and also New technology products.</li></ul> Responsibilities <ul><li>Responsible to lead and drive a team of engineers for design development and improvement of Special Purpose machinery, to the plant and execution of all new projects as per agreed APQP timelines.</li><li>End to end responsible for capturing the voice of Customers and all stakeholder requirements of the product and then assess review and correct machine design to meet the expectations.</li><li>Conducting design reviews effectively resulting reliable equipment and less rejections.</li><li>Train and Coach the team to build the M.E capability and competency.</li><li>Improve the process to reduce CoPQ and improve OEE, by quality, up-time and productivity.</li><li>Identify Automation and Cost Saving opportunities and able to deliver result.</li></ul> Requirements: <ul><li>14+ years of experience working in medium or large matrix organizations.&nbsp;</li><li>Hands on Experience in in high speed &amp; high Precision SPM designing , building and trouble shooting.</li><li>Experience in header assembly machines, fast and high precision Automation machines for Automotive industry is preferable.</li><li>Mechanical and Pneumatic systems trouble shooting and design skills.</li><li>Experience in EOL testing, like leakage, Electrical tests, AOI(Camera Vision inspection).</li><li>Updated knowledge on statistical process control systems.</li></ul>

Responsibilities: <ul><li>Design part and assemblies to meet mechanical and environmental requirements while embodying the most cost-effective solutions possible.&nbsp;</li><li>Ensure designs implement proper technologies while meeting manufacturing, cost, and timing goals.</li><li>Work directly with customers, and internal teams to identify requirements, establish design expectations, and meet agreed upon design, performance, and goals for projects.</li><li>Maintain project timelines to ensure all key deliverables are met.</li><li>Coordinate activities to accomplish prototype and pilot production runs to mature the design of components and assemblies and meet customer needs for finished material.</li><li>Coordinate project activities to ensure smooth release of products into manufacturing meeting customer requirements and established timelines.</li><li>Perform risk assessment tests and use results to improve design and reduce risks before reaching manufacturing.</li><li>Maintain leading-edge technical proficiency and stay abreast of new trends and scientific developments in fields affecting the mechanical sciences.</li><li>Product testing/ qualification to ensure meeting product requirements &amp; write technical reports on significant findings.</li><li>Work with departments in obtaining samples and test data and provide with information to prepare datasheet/ customer drawing.</li></ul> Requirements: <ul><li>Bachelor’s degree on Mechanical Engineering or equivalent discipline.</li><li>At least 5 years of work experience in a product design.&nbsp;&nbsp;</li><li>Antenna or RF experience a plus.</li><li>Capable of manipulating CAD modeling tools, Creo preferred.</li><li>Creo/ANSYS Simulation experience is a plus.</li><li>PDM Windchill experience will be added advantage.</li><li>A solid understanding of mechanical designs including GD&amp;T, structural mechanics and manufacturing process on sheet metal stamping, injection molding, die casting, printed circuit boards and assembly.</li><li>SixSigma methodologies or other strong data analytics background is a PLUS</li><li>Good verbal and written communication skills in English.</li><li>Works well in a Team environment.</li><li>Ability to work in a global environment, able to collaborate with individuals across geographies.</li><li>Complete technical documents, including design specification, test report, engineering presentation.</li><li>Proficiency in Excel and Powerpoint.</li></ul>

Responsibilities: olicies And Procedures, Quality System: <ul><li>Implement quality policies, procedures and systems; maintain/update quality engineering work instruction in order to ensure the business procedures in line with QS and global standards.</li><li>Involve in customer audit, implement responsible procedures and facilitate other departments to close their actions on time and fulfil requirement to our products and process in order to meet customer requirement and our quality system"</li></ul> Incoming Materials Quality Issue Handling: <ul><li>Analyze and identify material issues found in production line, drive SQE for supplier improvement in order to maintain incoming material quality."&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li></ul> Process Quality Issues Handling: <ul><li>Handle quality issues occurred in process in order to improve and maintain product quality performance, perform risk assessment to take proper disposition, develop improvement action to prevent the occurrence.</li><li>Drive improvement for nonconformance detected by QC.</li><li>Lead team to develop error-proof and mistake proof solution for quality risk identified. In order to achieve good quality performance of product.</li></ul> Customer Complaints/Feedback Handling: <ul><li>Handle customers complaints including develop and implement customer complaints corrective and preventive action plan in order to maintain the relationship with customers and provide extraordinary customer experience to customer.</li></ul> Quality documents and criteria setting: <ul><li>Develop quality engineering documents (QIP,WI,VA), set up and develop quality inspection criteria, prepare COC format in order to maintain product quality performance.</li></ul> Quality Improvement: <ul><li>Develop and track assigned process quality improvement plan according to product quality performance and implement situation in order to improve and maintain product quality performance. Using the DMAIC method to drive the improvement.</li><li>Work with team to qualify the process change/new line qualification/new machine, foresee quality risk and advise robust tooling/process design, identify the risk/gap and drive proper improvement action, follow up until action closed in order to improve and maintain product quality performance.</li></ul> Scrap control and improvement: <ul><li>Review and approve WIP scrap application</li><li>Monitor WIP scrap and take proper countermeasures</li><li>Follow up top failures in process, identify root cause and major contributor, drive team to take solid improvement action to improve</li><li>Validate the improvement action and follow up the result</li><li>in order to maintain product quality performance&nbsp;</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>College diploma major in engineering</li><li>3 years electronics industry quality related working experience, 1 year SMT experience is preferred.</li><li>Green belt/Black belt certification is preferred, can lead the team to do the DOE/GR&amp;R and data analysis ability.</li><li>Familiar with manufacturing process of cable assembly, such as terminal and IDC crimping, soldering, electrical testing, signal integrity etc.</li><li>Familiar with electrical industry specification such as IPC620, IPC610 etc.&nbsp;&nbsp;</li></ul>

Role Description:&nbsp; <ul><li>As a Wire/Cable Senior R&amp;D/Product Development Engineer at our clienty, you will work in a dynamic, diverse environment focusing on the development and qualification of high-speed bulk cable products.</li><li>This role supports the full product lifecycle—from concept and design through testing, production, and release—while collaborating across engineering, manufacturing, and customer teams.</li></ul> Responsibilities:&nbsp; <ul><li>Lead the design, specification, and documentation of bulk cable Signal Integrity (SI) and physical testing interfaces for high-speed bulk cable applications.</li><li>Interact with Cable Assembly SI teams to correlate bulk cable data with cable assembly SI/physical test results.</li><li>Collaborate with customers and end-users to understand use case requirements and establish test specifications aligned with industry standards.</li><li>Work with internal and external vendors to design and implement test equipment and fixtures.</li><li>Develop, document, and maintain bulk cable SI/physical test protocols.</li><li>Train bulk cable test personnel across all our client DDN bulk cable locations on the use of testing fixtures and procedures.</li><li>Deliver technical presentations to both internal teams and external customers as needed.</li><li>Support and participate in company safety (SAFE) and ISO compliance activities.</li><li>Provide technical support for maintenance and calibration of bulk cable test equipment.</li><li>Contribute to cross-functional projects and initiatives supporting business objectives.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of circuit analysis&nbsp;</li><li>Experience with reliability testing and engineering.</li><li>Proficient in using Network Analyzers and working with S-Parameters.</li></ul>

Responsibilities:&nbsp; <ul><li>Lead process development, implementation, and documentation for bulk cable manufacturing.</li><li>Support product/process validation and transfer activities.</li><li>Assist with product qualification, working closely with engineering and test lab teams.</li><li>Partner with Product Development/Design Engineering to ensure manufacturability.</li><li>Interact with test laboratories on process/product qualification tasks, including DOE, PFMEA, 8D investigations, and Failure Analysis (FA).</li><li>Support tooling specification and design for manufacturing processes.</li><li>Provide engineering support to additional manufacturing sites as required.</li><li>Collaborate with suppliers to ensure process compliance and capability.</li><li>Support SAFE (Safety Activities For Employees) and ISO quality compliance initiatives.</li><li>Provide technical support for manufacturing maintenance activities.</li><li>Participate in cross-functional projects that support business growth and continuous improvement.</li></ul> Requirements:&nbsp; <ul><li>Strong knowledge of materials, processes, and systems used in wire and cable manufacturing.</li><li>Proficient in CAD software for tooling and process design.</li><li>Practical knowledge and experience with SPC (Statistical Process Control), Six Sigma, and Lean Manufacturing principles.</li><li>Ability to manage multiple projects and deliver results under tight timelines.</li><li>Willingness to travel internationally up to 30% as required.</li></ul>

Responsibilities: <ul><li>Collaborate with cross-functional teams to design, develop, and launch new power connector and cable assembly solution products for data center applications.</li><li>Provide leadership and manage the complete product development life cycle (starting from the voice of the customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), and make engineering evaluation/proposal to the customer.</li><li>Follow LEANPD Project Process to support the project team from the PDE perspective to complete the Project (NPI or Sustaining) on time, with quality, and within budget. Drive the development and release of products, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Develop and manage product documentation, including product requirements, design documents, and test plans/reports.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all technical, quality, and cost objectives.</li><li>Work closely with suppliers to identify and qualify new components and technologies.</li><li>Conduct thorough design verification and validation testing to ensure the product meets the required specifications.</li><li>Collaborate with manufacturing teams to ensure a smooth transition to production.</li><li>Mentor and guide junior engineers and technicians to develop their skills and knowledge.</li><li>Conduct competitive analysis and market research to identify opportunities for innovation and differentiation.</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams.</li><li>Maintain a System level understanding of customer application and the product design/concept necessary for providing a solution to the customers’ expectations.</li><li>Technical support to customer, sales, PM, and plant team. Conduct necessary tests, engineering analysis, troubleshooting, and verification.</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our Global competency centers to enhance business revenue &amp; growth.</li><li>Apply engineering best practices to reduce cost and sustain existing products to meet customer’s cost targets.</li></ul> Requirements: Preferred Years of Exp viz Minimum Years of Experience: <ul><li>Bachelors or Masters degree in Mechanical or Electrical Engineering.</li><li>Strong understanding of mechanical and electrical engineering principles.</li><li>Experience with product development processes, including design, prototyping, and testing.</li><li>Strong problem-solving skills and ability to work independently or as part of a team.</li></ul> Role Type: Skills: <ul><li>Minimum of 10 years of experience in product development, preferably in the technology industry with a minimum of 5 years in the Cable Assembly or connector related.</li><li>This highly technical position requires an individual who can work independently.</li><li>Experience in product compliance certification ( Product, Safety, Environmental substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM).</li><li>Capability and experience in presentation on products, solutions, and technologies.</li><li>Previous experience in working in high-performing multi-disciplinary global engineering teams.</li></ul>

Responsibilities: <ul><li>As Sr Developer, responsible for contribution to technical Solution Design, carry out Development independently, Testing of Maximo 7.6 with Utility, ACM or other Maximo Addons or Industry solution.</li><li>Application design, Automation scripts using Python/Java scripts, Complex maximo configurations.</li></ul> Requirements: Major Requirements: <ul><li>Experience with object-oriented programming languages such as Java and C++.</li><li>Deep knowledge of Java programming and related technologies.</li><li>Experience in JSON, XML, XML parsers, and XSL.</li><li>Experience in ETL, Master Data Load and Data Handling (Extraction/Transformation/ Manipulation).</li><li>Experience working with Oracle, DB2 and SQL Server databases: database sizing, troubleshooting, and performance tuning.</li><li>Configuration of Web Server Application like WebLogic/WebSphere.</li></ul> Skills and Requirements: <ul><li>At least 4 years of experience in Configuration &amp; Integration, Support and Maintenance in IBM Maximo v7.x.</li><li>Hand on experience on Following:</li><li>Extensive experience on Rest and Jason based integration.</li><li>Middleware integrations ex – Mulesoft, SAP PI.</li><li>Maximo migration experience with release and deployment management activities.</li><li>Data migration experience informatica and MIF framework.</li><li>Experience in Data modeling for BI reporting and hands on BIRT experience.</li><li>Expertise &amp; working knowledge in Maximo Asset Management (Solution design, development and implementation).</li><li>Working knowledge of capabilities in the IBM Maximo EAM/APM solution and Maximo Integration Framework.</li></ul> Qualifications: <ul><li>Bachelor’s degree or foreign equivalent required from an accredited institution.</li><li>Will also consider three years of progressive experience in the specialty in lieu of every year of education.</li><li>At least 4 years of Relevant Information Technology experience.</li></ul>

Responsibilities: <ul><li>Recommend and Deploy System Solutions to improve Supply Chain Systems and resolve process issues</li><li>Conduct Business Process Reviews, identifying SAP Business Process Gaps and Deploying Best Demonstrated SAP Business Processes, maintaining consistency across SENSORS sites</li><li>Improve SAP proficiency and process knowledge across SENSORS Supply Chain Organization</li><li>Create and Maintain Training Material and Knowledge Content</li><li>Develop and Train all Supply Chain Key User Community</li><li>Develop Business Requirements Documents and Identify ROI for Systems Enhancements</li><li>Perform User Acceptance Testing and Deployment of Latest SAP Enhancements</li><li>Promote, Maintain, Enforce Master Data Integrity and Governance.</li><li>Troubleshoot, Identify, and Resolve SAP Issues as liaison to the whole Supply Chain Organization and company Information Systems.</li></ul> Requirements: <ul><li>Bachelor’s degree in Supply Chain, Industrial Engineering, Information Systems or similar&nbsp;</li><li>Working knowledge of Supply Chain processes, Materials Resource Planning Systems, Engineering Master Data including BOMs, Routes, Material Masters, Info Records, Source Lists.</li><li>Minimum of 5 years experience in Supply Chain/Logistics, Procurement or Industrial Engineering, including detailed knowledge of SAP processes and capabilities within SAP PUR/MM/MDG/ modules</li><li>Training expertise for both classroom and one on one training situations</li><li>Excellent project manager with very good organizational capabilities</li><li>Solid influencing skills, particularly where there is no reporting relationship</li><li>Problem/root cause identification and communication skills</li><li>Excellent team building skills and ability to motivate and persuade associates from the plant floor level through management. “Getting things done through other people”</li><li>Ability to translate Business needs into Business Requirements Documents</li><li>Ability to effectively conduct requirements gathering sessions and concisely documenting the outcome&nbsp;</li><li>Travel domestically &amp; internationally as needed (10-20%)</li></ul>

Skills

Industry

Location

Jobtitle

48 testing validation Jobs found

Manager, Operations

Manager/ AVP – Corporate clients

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Senior Product Development Engineer (Mechanical Design)

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Staff Power Product Development Engineer

Senior Developer (IBM Maximo)

Inventory Analyst

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

48 testing validation Jobs found

Manager, Operations

Manager/ AVP – Corporate clients

Manager Manufacturing Engineering - Mechanical Lead, Electronics Lead

Senior Product Development Engineer (Mechanical Design)

Sr Quality & Reliability Engineer

Wire/Cable Senior R&D/Product Development Engineer

Manufacturing & Process Development Engineer II (Wire & Cable)

Staff Power Product Development Engineer

Senior Developer (IBM Maximo)

Inventory Analyst

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.