Facilities Supervisor III

GPS (Global Product Support) Engineer

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Customer Engineer - C3

Process Engineering Manager

Lead IT Business Consultant Service - D365

ERP Solution Architect- D365

Senior / Lead Maintenance Technician

Customer Service Specialist

Responsibilities: Safety and Legal Compliance: <ul><li>Familiarity with the operational legal requirement of the plant from DOLE, PEZA, DENR, LLDA, FPIP-DOR, BFP, FDA, PNP, PDEA, etc.</li><li>With on Safety Requirements for LOTO, Machine Guarding, Control Reliability, Work at Heights, Electrical Safety, Confined Spaces, Cyanide Alarms and sensors, etc.</li></ul> Supervision and Management of Plant Facilities Operation and Maintenance specifically the following: <ul><li>HVAC System</li><li>Compressed Dry Air</li><li>Electrical System</li><li>Water and Sewer Waste Water Operation</li><li>Plating Water and Wastewater Treatment</li><li>Building Maintenance and Building Management System</li><li>Electronic Controls and PLC System</li><li>Elevator System</li><li>Genset</li><li>Vacuum System</li><li>Fire protection and detection system</li><li>Paging System</li><li>Boiler, Scrubber and Mist Eliminator System</li><li>With ability to troubleshoot and recommend cost and life-cycle improvement for each process.&nbsp;</li></ul> Project Management and Cost Control: <ul><li>Leads the plant requirement on all its improvement project initiatives.</li><li>Highly knowledgeable on applicable engineering standards to recommend in the project design stage.</li><li>Up to date on the market costing to ensure accurate project cost estimation.</li><li>Recommend and review third party contracts.</li><li>With technical know-how to recommend fastest approach in meeting the deadline without issue on project quality.&nbsp;</li><li>Cost Cost Reduction Recommendation and Implementation:</li><li>Reviews plant performance related to power, water and expenses and recommend cost reduction measures.</li><li>Lead the plant to all Energy Conservation and Reduction programs.</li><li>Knowledgeable in Digital factory deployment such as Hydra Traceability, MES, Machine Connectivity for OEE tracking.</li></ul> Requirements: <ul><li>Licensed Engineer (ME, EE, ECE) with more than 10 years’ experience in Facilities Operation and Management in manufacturing set-up.&nbsp;</li><li>Able to communicate his/her idea to all levels of the organization.&nbsp;</li><li>Highly technical and analytical with People Management Skills.&nbsp;</li><li>Must have negotiation skills and able to work under pressure with ease and confidence.</li></ul>

Responsibilities: <ul><li>Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.&nbsp;&nbsp;</li><li>Participate in or own first chamber Build &amp; Test in Apps lab. Solve issues, or work with Engineering to address issues identified.&nbsp;</li><li>Work with Manufacturing to develop procedures and participate (if required) on New Product final test</li><li>Partner with Quality &amp; Reliability (Q&amp;R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed</li><li>Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)</li><li>Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required</li><li>Collect process and qualification data to create product Best Known Methods (BKMs)</li><li>Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping</li><li>Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations</li></ul> Requirements: <ul><li>More than 5 years of relevant equipment experiences in the semiconductor industry</li><li>Strong understanding of Vacuum chambers used in PVD or CVD, wet cleans products as well as hands-on skills in Electro mechanical semiconductor assemblies</li><li>Excellent communication and interpersonal skills</li><li>Confident in liaising with internal and external stakeholders of various seniorities</li></ul>

Responsibilities: Process Documentation and Modelling: <ul><li>Collaborate with business stakeholders and process owners to understand and document existing processes using BPMN notation.</li><li>Create detailed process maps, workflows, and diagrams that accurately represent the end-to-end processes and related activities (process map should include clear RACI, Tools, WI)</li><li>Ensure that all process documentation is clear, consistent, and follows best practices in BPMN modelling.</li><li>Adopt Single Source of Truth concept, utilize BPMN-tool to create, update, and maintain process documentation in a centralized and accessible manner.</li><li>Ensure process KPI are define &amp; documented</li></ul> Process Analysis and Optimization: <ul><li>Work with process owner to analyse processes &amp; identify inefficiencies, bottlenecks, and areas for improvement.</li><li>Work with process owner &amp; cross-functional teams to propose for process optimizations and enhancements using BPMN-tool capabilities.</li><li>Validate process changes with stakeholders and ensure that process improvements align with organizational goals, including handshake process to cross functional team</li><li>Ability to perform data analysis with big data and summarize into actionable insight</li></ul> System Knowledge &amp; Analysis: <ul><li>Understand D365 system logic &amp; guide users to follow the documented purchasing processes &amp; principles during day-to-day operation</li><li>Able to drill through system data &amp; perform analysis per business request using available analytic tools (PowerBI, Excel, Power Apps, etc)&nbsp;</li></ul> Requirements: <ul><li>Bachelors degree in Supply Chain Management, Business Administration, Management, Purchasing or a related field. Masters degree is a plus.</li><li>Proven experience (typically 5+ years) in business process management, process documentation, or related roles.</li><li>At least 3 years working experience in operational supply chain functions (mainly focus on purchasing)</li><li>Excellent project management skills, planning, prioritization, ability to innovate and execute on solutions that matter, and provide timely updates/recommendations.</li><li>Good analytical, influencing and problem-solving skills and ability to handle team and client discussions.</li><li>Flexible to take on ad-hoc assignment or project as necessary.</li><li>Logical &amp; Analytical mindset with the ability to identify process improvement opportunities through data analysis.</li><li>Excellent communication skills, both written and verbal, to effectively collaborate with stakeholders and present complex concepts.</li><li>Understanding of process improvement methodologies such as Lean, Six Sigma, or Business Process Reengineering (BPR).</li><li>Familiarity with compliance and regulatory requirements related to business processes.</li><li>Experience with stakeholder management with strong influencing skillset</li></ul>

Responsibilities: Process Documentation and Modelling: <ul><li>Collaborate with business stakeholders and process owners to understand and document existing processes using BPMN notation.</li><li>Create detailed process maps, workflows, and diagrams that accurately represent the end-to-end processes and related activities (process map should include clear RACI, Tools, WI)</li><li>Ensure that all process documentation is clear, consistent, and follows best practices in BPMN modelling.</li><li>Adopt Single Source of Truth concept, utilize BPMN-tool to create, update, and maintain process documentation in a centralized and accessible manner.</li><li>Ensure process KPI are documented</li></ul> Process Analysis and Optimization: <ul><li>Work with process owner to analyse processes &amp; identify inefficiencies, bottlenecks, and areas for improvement.</li><li>Work with process owner &amp; cross-functional teams to propose for process optimizations and enhancements using BPMN-tool capabilities.</li><li>Validate process changes with stakeholders and ensure that process improvements align with organizational goals, including handshake process to cross functional team</li></ul> System Knowledge &amp; Analysis: <ul><li>Understand D365 system logic &amp; guide users to follow the documented planning processes &amp; principles during day-to-day operation</li><li>Able to drill through system data &amp; perform analysis per business request using available analytic tools</li></ul> Requirements: <ul><li>Bachelors degree in Supply Chain Management, Business Administration, Management, Information Technology, Warehouse/Logistic or a related field. Masters degree is a plus.</li><li>Proven experience (typically 5+ years) in business process management, process documentation, or related roles.</li><li>At least 3 years working experience in operational supply chain functions (Warehouse/Logistic)</li><li>Excellent project management skills, planning, prioritization, ability to innovate and execute on solutions that matter, and provide timely updates/recommendations.</li><li>Good analytical, influencing and problem-solving skills and ability to handle team and client discussions.</li><li>Flexible to take on ad-hoc assignment or project as necessary.</li><li>Logical &amp; Analytical mindset with the ability to identify process improvement opportunities through data analysis.</li><li>Excellent communication skills, both written and verbal, to effectively collaborate with stakeholders and present complex concepts.</li><li>Understanding of process improvement methodologies such as Lean, Six Sigma, or Business Process Reengineering (BPR).</li><li>Familiarity with compliance and regulatory requirements related to business processes.</li></ul>

Responsibilities: <ul><li>Install, maintain, and upgrade customer equipment</li><li>Apply basic diagnostic techniques to assess equipment and address technical issues, with assistance from Senior Field Service Engineers [Customer Engineers]</li><li>Collaborate with Senior Field Service Engineers [Customer Engineers] and/or the customer to understand roadmaps, process flows, inflection points, requirements, and business challenges&nbsp;</li><li>Train and mentor junior Field Service Engineers [Customer Engineers]</li><li>Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems</li><li>Coordinate and communicate directly with customers</li><li>Fulfill additional duties, as assigned</li></ul> Requirements: <ul><li>Completion of a Diploma and/or Bachelor’s degree, military technical training, field service experience, or trade certification</li><li>4-7 years of work experience in semiconductor industry or other equipment support industry</li><li>Advanced mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, and/or thermodynamics</li><li>Strong knowledge of hand tools and their appropriate usage, including digital multimeters</li><li>Effective written and verbal communication skills</li><li>Basic knowledge of Microsoft Excel, Word, and PowerPoint&nbsp;</li><li>Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.</li></ul>

Responsibilities: <ul><li>Own and lead the process engineering function for cleanroom assembly, end-of-line test and pre-packing, ensuring safe, compliant and capable processes that meet cost, quality, safety and delivery targets.</li><li>Define department objectives, KPI dashboard and governance (e.g., NPI definition and handover lead times, first pass yields, failure rates, quality qppm) and drive execution through standard routines and reviews.</li><li>Lead, coach and develop a team of process engineers / technicians; set clear expectations, provide performance feedback, support competency development and ensure effective succession and talent retention.</li><li>Plan and manage resources (headcount, skills, priorities) to support daily manufacturing needs, escalations, and strategic projects; balance workload across product series and value streams.</li><li>Own process engineering deliverables for NPI or transfer projects: feasibility, process concept, capacity planning, industrialization roadmap, and readiness reviews to ensure on-time SOP.</li><li>Lead cross-functional collaboration with Product Design, Quality, Production, Maintenance, Supply Chain and global counterparts to deliver robust processes supported by Design for Manufacturing / Assembly / Test (DFM / DFA / DFT) improvements.</li><li>Own the strategy and budget for process equipment, tools, fixtures, testers and workstations; approve specifications, manage procurement, acceptance, validation and release to production.</li><li>Drive continuous improvement programs (CIP / Darwin) to improve throughput, cycle time, productivity and cost; support CIP events and ensure sustained gains through standardization.</li><li>Ensure effective utilization of PFMEA and other quality tools to manage and mitigate quality risks during process development, acceptance and production release.</li><li>Develop engineering procedures to govern end-to-end process engineering activities across process design, definition, industrialization, handover, sustainment and continuous improvements.&nbsp;</li><li>Ensure upkeep of process work instructions in D365 via Process Control System as per global standards, including revisioning control based on valid change management procedures.</li><li>Ensure robust management of engineering changes (ECR), process changes and deviations, including impact assessment, validation and controlled implementation.</li><li>Own 8D problem-solving governance for process-related issues, ensure timely root-cause containment / corrective and preventive actions, lessons learned, and clear communication to stakeholders.</li><li>Drive safety, ergonomics and regulatory / ISO compliance for process engineering scope; ensure safe equipment and process design through risk assessments.</li><li>Drive the sustainable deployment of state-of-the-art engineering solutions on the assembly shop floor to enhance quality control through robust error-proofing (poka‑yoke) mechanisms and digitalizations.</li><li>Act as the site focal point to align with global and process engineering counterparts on technology roadmaps, best practices and standardization.</li><li>Manage departmental reporting, change control and communication: provide clear status updates, risks and mitigation plans to operations and leadership.</li><li>Support ad hoc tasks as assigned by superior.</li></ul> Requirements: <ul><li>8–12+ years’ experience in manufacturing/precision mechanical assembly (high-mix preferred), with demonstrated ownership of end-to-end process engineering (process development/industrialization, cleaning / helium leak testing, and controlled-environment or cleanroom assembly where applicable).</li><li>Bachelor’s/Master’s degree in Mechanical, Manufacturing, Industrial Engineering or equivalent; formal training in Lean/Six Sigma and structured problem solving will be added advantage.</li><li>Proven people leadership experience (hiring, coaching, performance management) with the ability to lead technical teams and influence cross-functional stakeholders to deliver manufacturing results.</li><li>Strong written and spoken English communication skills, including the ability to produce clear technical documentation, present KPI performance, and communicate risks / mitigation to leadership.</li><li>Strong understanding of mechanical / pneumatic / electromechanical systems, process equipment and tooling, with experience defining specifications, commissioning, qualification / validation and release to production.</li><li>Demonstrated ownership and governance mindset - sets clear standards, drives disciplined execution, and maintains strong internal / external customer focus.</li><li>Strong prioritization, planning and project management skills to manage multiple workstreams (daily support, escalations, NPI, CIP) under tight timelines and resource constraints.</li><li>Strong technical acumen in quality planning processes especially in definition of process controls based on PFMEA.</li><li>Data-driven operational leadership: builds KPI dashboards, drives root-cause problem solving (8D / A3), and delivers sustained improvements in yield, throughput / cycle time and qppm.</li><li>Strong stakeholder management and change leadership - able to drive alignment across Production, Quality, Maintenance, Supply Chain and global counterparts; comfortable leading reviews and escalations.</li></ul>

Responsibilities: Lead Consultant Responsibilities <ul><li>Provide oversight and ensure solutions align with the broader business architecture, avoiding siloed approaches.</li><li>Ensure modifications to shared functionalities are evaluated holistically to avoid conflicting changes.</li><li>Establish and enforce best practices, including clear documentation, intuitive configurations, and optimized parameter settings.</li><li>Challenge business requirements to ensure cost-effective and value-driven solutions.</li><li>Harmonize design across multiple consultants, teams, and projects to enhance consistency and efficiency.</li></ul> Work closely with the ERP Solution Architect to ensure: <ul><li>Alignment with Microsoft’s roadmap and strategic ERP direction.</li><li>Architectural consistency across process areas and technical solutions.</li><li>Risk assessment for system-critical modifications.</li><li>Data migration strategies align with the overall system architecture.</li><li>Identification and resolution of conflicts with other processes, modifications, or upcoming Microsoft updates.</li></ul> Service-Specific Responsibilities <ul><li>Lead solution delivery for Service processes based on D365 Finance and Operations modules, covering:</li></ul> <ul><li>Project Management and Accounting module</li><li>HSO Service Management module</li><li>Intercompany chain</li><li>Sales orders and Return orders management</li><li>Advanced Warehousing (incl. Batch and Serial tracking)</li><li>Act as the primary owner and project lead for Service-related ERP implementations and enhancements.</li><li>Analyze business needs and develop solution concepts.</li><li>Design, configure, and document ERP solutions.</li><li>Provide detailed requirements for the development team.</li></ul> Requirements: <ul><li>Extensive experience (min. 5 years) as a Microsoft D365 ERP F&amp;O IT Consultant with a focus on Service.</li><li>Agile mindset and ability to work independently.</li><li>Strong analytical and problem-solving skills, with the ability to think critically under pressure.</li><li>Excellent communication skills, capable of engaging with stakeholders at all levels.</li><li>Leadership skills, including the ability to mentor consultants and drive best practices across teams.</li><li>Fluent in English.</li></ul>

Responsibilities: Design Authority Responsibilities <ul><li>Validate solution designs and ensure architectural consistency across modules and projects.</li><li>Conduct detailed design reviews for GAPs, FDDs, and technical specifications before Design Authority approval.</li><li>Identify integration and performance risks early in the design phase and guide mitigation strategies.</li><li>Support the Design Authority in ensuring end-to-end solution coherence, especially across Finance, SCM, Project Ops, and Sales.</li><li>Work closely with the Domain Architect ERP to ensure:</li><li>Alignment with our client ERP domain architecture and roadmap.</li><li>Adherence to Microsoft’s D365 best practices and upgrade paths.</li><li>System-critical modifications are designed and implemented with risk awareness.</li><li>Data migration and interface designs follow architectural standards.</li><li>Collaborate with Lead Consultants and Developers to ensure designs are feasible, efficient, and maintainable.</li></ul> Solution Delivery Responsibilities <ul><li>Provide hands-on architecture support to delivery teams during all project phases (Blueprint, Build, Test, Deploy).</li><li>Define and communicate solution patterns and reusable components to increase delivery efficiency.</li><li>Oversee the technical integrity of ERP solutions and their alignment with the target architecture.</li><li>Support complex problem-solving, performance optimization, and integration design.</li><li>Ensure compliance with our client ERP governance, documentation, and security standards.</li><li>Act as the quality gate for designs entering the Design Authority approval process.</li></ul> Requirements: <ul><li>Minimum 8 years of experience in Microsoft D365 ERP solution design and implementation, with deep knowledge across multiple modules (Finance, SCM, or Project Operations).</li><li>Proven experience as a Solution Architect or Senior Consultant in large-scale international ERP programs.</li><li>Strong understanding of D365 data models, integrations (Data Management Framework, Dual Write, APIs), and reporting (SSRS, Power BI).</li><li>Experience in solution governance, design validation, and architecture documentation.</li><li>Familiarity with Azure integration services, Power Platform, and lifecycle management tools (LCS).</li><li>Agile mindset, excellent problem-solving skills, and strong delivery orientation.</li><li>Ability to collaborate across functional and technical teams, ensuring alignment between design, build, and deployment.</li><li>Excellent communication skills and fluency in English (both written and verbal).</li></ul>

Position Summary: <ul><li>The Senior Maintenance Technician will lead maintenance activities in a GMP-regulated pharmaceutical manufacturing environment, ensuring reliable operation of production and facility systems.&nbsp;</li><li>This role focuses on equipment uptime, preventive maintenance, troubleshooting, and continuous improvement of utilities and process equipment—including tablet presses, granulation systems, and HVAC systems supporting cleanroom operations.</li></ul> Responsibilities: <ul><li>Perform and oversee preventive, predictive, and corrective maintenance on pharmaceutical manufacturing and facility equipment.</li><li>Lead troubleshooting and repair efforts on tablet presses, granulators, blenders, fluid bed dryers, coating machines, and other process equipment.</li><li>Maintain and repair facility utilities such as HVAC systems, compressed air, purified water, steam, chilled water, and vacuum systems.</li><li>Support calibration and mechanical integrity programs to ensure GMP compliance.</li><li>Collaborate with Production, Engineering, and Quality departments to minimize downtime and ensure regulatory requirements are met.</li><li>Review and update maintenance SOPs, work orders, and documentation in accordance with cGMP and FDA standards.</li><li>Train and mentor junior technicians and provide technical guidance during shifts or project work.</li><li>Participate in capital projects, equipment installation, and commissioning/qualification activities (IQ/OQ/PQ).</li><li>Identify and implement process improvements to increase reliability and reduce maintenance costs.</li><li>Support environmental monitoring and cleanroom operation standards through proper maintenance of HVAC and filtration systems.</li></ul> Requirements: <ul><li>Associate’s or Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering (or equivalent technical discipline) preferred.</li><li>Experience: Minimum 5–8 years in a maintenance or engineering role within a pharmaceutical, biotech, or GMP manufacturing environment.</li><li>Strong hands-on experience with tablet compression, granulation, and packaging equipment.</li><li>Working knowledge of HVAC systems, cleanroom environments, and associated regulatory requirements (ISO 14644, cGMP).</li><li>Familiarity with CMMS systems (e.g.,, BMRAM, Maximo, SAP PM) and maintenance documentation practices.</li><li>Strong understanding of electrical, mechanical, and pneumatic systems.</li><li>Excellent problem-solving, communication, and leadership skills.</li></ul> Preferred Skills: <ul><li>Knowledge of PLCs and control systems troubleshooting.</li><li>Experience with aseptic or sterile manufacturing utilities.</li><li>Understanding of 21 CFR Part 11 and data integrity principles.</li><li>Root cause analysis and reliability-centered maintenance experience. Key Responsibilities</li></ul>

Responsibilities: <ul><li>Generate shipping documents from ERP or customer’s website.</li><li>Track order/delivery status and inform change on delivery schedule of customer.</li><li>Monthly Closing</li><li>Responding to customer questions</li><li>Preparing documents and reports</li><li>Other administrative tasks related sales operations</li></ul> Requirements: <ul><li>1 - 3 years(or above) of experience in Customer Service or Sales Admin.: Semiconductor industry is preferred.</li><li>Good English skills in writing and speaking</li><li>Open mind to cooperate with internal teams.</li><li>Good communication skill</li><li>M/S office skill, especially Excel, ERP is preferred</li><li>Receive order from customer and check details of sales order.</li><li>Enter sales order and service order in ERP.</li><li>Request delivery to logistics and customer.</li></ul>

Skills

Industry

Location

Jobtitle

15 vacuum chambers Jobs found

Facilities Supervisor III

GPS (Global Product Support) Engineer

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Customer Engineer - C3

Process Engineering Manager

Lead IT Business Consultant Service - D365

ERP Solution Architect- D365

Senior / Lead Maintenance Technician

Customer Service Specialist

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

15 vacuum chambers Jobs found

Facilities Supervisor III

GPS (Global Product Support) Engineer

Business Process Analyst – Purchasing

Business Process Analyst – Warehouse/Logistics

Customer Engineer - C3

Process Engineering Manager

Lead IT Business Consultant Service - D365

ERP Solution Architect- D365

Senior / Lead Maintenance Technician

Customer Service Specialist

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.