Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Finance Controller

QC Chemist

Docusign Developer

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures. Ensuring all tests and procedures meet company and industry standards.</li><li>Preparing test reports for management.</li></ul> Requirements: <ul><li>BS Degree in Engineering or Science, 5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li></ul>

Responsibilities: <ul><li>Assist the CEO in reviewing plant performance, production data, and technical reports from steel and power units.</li><li>Coordinate with project, maintenance, and operation teams for updates on production, energy consumption, and process optimization.</li><li>Serve as the liaison between the CEO’s office and functional heads, ensuring timely follow-up and closure of key action items.</li><li>Organize and document strategic meetings, board reviews, and inter-departmental coordination discussions.</li><li>Draft high-quality communications, reports, and briefing materials for the CEO.</li><li>Analyse operational KPIs and provide insights or recommendations for productivity and efficiency improvements.</li><li>Track progress of ongoing expansion, modernization, or efficiency projects.</li><li>Manage CEO’s schedule, travel plans, and meeting coordination where required.</li><li>Ensure confidentiality and proper handling of sensitive business information.</li><li>Support in preparation for stakeholder meetings (investors, government, JV partners, etc.).</li></ul> Requirements: <ul><li>B.E./B.Tech in Mechanical / Metallurgy / Electrical / Industrial Engineering, MBA or PGDM in Operations / Strategy (preferred from top ranked institutes)</li><li>Minimum 5–10 years of experience in plant operations, project management, or technical coordination roles in the steel/power sector.</li><li>Strong analytical, communication, and presentation skills.</li><li>High proficiency in MS Office (Excel, PowerPoint, Project) and ERP systems.</li></ul>

Role Description: <ul><li>We are seeking a qualified and experienced Corporate Legal Counsel to join our Legal team in Egypt.</li><li>This middle management role supports corporate legal operations across Egypt and support MENAT region, with a focus on contract management, governance, regulatory compliance, and internal advisory.</li><li>The successful candidate will report directly to the Head of Legal and act as a legal business partner to internal stakeholders.</li></ul> Responsibilities: Corporate and Regional Support <ul><li>Assist in reviewing corporate processes and documentation within Egypt.</li><li>Support legal coordination and compliance efforts across the MENAT region.</li><li>Maintain and update corporate records and filings in accordance with internal and regulatory requirements.</li><li>Support corporate secretarial functions across the region and ensure timely documentation.</li></ul> Contract Management and Documentation <ul><li>Draft, review, and revise legal documents including but not limited to contracts, NDAs, service agreements, B2B/B2C agreements, and purchase orders.</li><li>Collaborate with internal teams and external counsel to ensure contractual terms meet legal and business objectives.</li><li>Maintain organized records of executed agreements and develop standardized templates.</li></ul> Governance and Compliance <ul><li>Assist in implementing internal governance policies and monitor compliance.</li><li>Conduct legal research and support risk assessments related to business decisions.</li><li>Identify potential legal risks and escalate issues to the Head of Legal with recommended solutions.</li></ul> Legal Advisory and Communication <ul><li>Provide clear explanations of legal terms and obligations to internal stakeholders.</li><li>Provide legal opinion and consultations to internal stakeholders.</li><li>Act as a liaison between the legal department and other business units.</li><li>Prepare legal summaries and reports for senior legal review.</li></ul> Regulatory and Governmental Affairs <ul><li>Support corporate matters including GAFI documentation and authentication processes.</li><li>Liaise with governmental authorities regarding licensing and regulatory compliance.</li><li>Ensure adherence to company HSE policies and contribute to legal compliance in risk assessments.</li><li>Handle external law firms and corporate secretariate work and have the ability to draft bilingual OGMs, EGMs and BoDs.</li></ul> Requirements: <ul><li>Bachelor of Law (LL.B.) or Juris Doctor (J.D.) with a minimum grade of “Good”.</li><li>Master of Laws (LL.M) or equivalent postgraduate qualification is a plus.</li><li>4 – 7 years of experience in corporate law within a reputable law firm or multinational organization.</li><li>Admitted to the Egyptian Bar Association.</li><li>Fluent in English and Arabic (written and spoken).</li><li>Strong knowledge of contract law, corporate governance, licensing, and regulatory frameworks.</li><li>Familiarity with GAFI procedures and governmental dealings.</li><li>Litigation experience is a plus.</li></ul> Skills and Competencies <ul><li>Legal research, drafting, and negotiation.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and presentation abilities.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>High attention to detail and sound judgment.</li><li>Proficiency in Microsoft Office applications (Word, Excel, PowerPoint).</li></ul>

Role Overview: <ul><li>The Product Manager / Senior Product Manager – Hospital &amp; Oncology will be responsible for driving strategic and operational marketing initiatives for the Hospital Care portfolio across the Malaysian market.&nbsp;</li><li>This role focuses on developing and executing brand strategies, launching new products, and expanding the business through data-driven insights and strong cross-functional collaboration. The incumbent will play a key role in ensuring successful brand performance, portfolio growth, and alignment with corporate objectives within the hospital and institutional healthcare segments.</li></ul> Responsibilities: Marketing Planning (40%) <ul><li>Lead the development and execution of brand strategies and marketing plans to achieve business objectives and ensure effective market penetration.</li><li>Formulate pre-launch preparedness and go-to-market strategies for new and existing hospital care products.</li><li>Design and implement initiatives to enhance field force effectiveness, including sample strategy, sales meetings, and other sales-related marketing activities.</li><li>Develop and manage the annual brand business plan, including strategic priorities, objectives, and budget allocation.</li><li>Optimize resource planning and allocation to address evolving market dynamics and competitive challenges.</li></ul> New Portfolio Exploration &amp; Business Development (35%): <ul><li>Conduct in-depth product and market analyses to forecast demand, patient flow, and revenue potential for new products.</li><li>Generate actionable market insights through data analysis and engagement with healthcare professionals (HCPs).</li><li>Develop robust business cases for potential new portfolio additions, encompassing both prescription and hospital-based products.</li><li>Present business proposals and feasibility assessments to principals and senior management for approval and alignment.</li></ul> Marketing Implementation (25%): <ul><li>Plan, coordinate, and execute marketing campaigns and customer engagement activities to support product launches and ongoing brand promotion.</li><li>Build and strengthen relationships with key stakeholders including KOLs, hospital administrators, and healthcare associations to enhance brand reputation and visibility.</li><li>Implement and manage KOL engagement strategies aligned with brand objectives.</li><li>Manage brand budgets effectively and ensure timely development and rollout of marketing and promotional materials.</li><li>Support Continuing Medical Education (CME) programs and conduct product training sessions for the sales and medical teams to ensure consistent brand messaging and clinical accuracy.</li></ul> Requirements: <ul><li>Bachelor’s degree in Science or a related field.</li><li>Minimum of 2–3 years of experience as a Product Manager in a multinational pharmaceutical company.</li><li>Prior experience in a generic pharmaceutical company (in sales or product management) is an added advantage.</li><li>Strong understanding of key healthcare channels including general practitioners, private hospitals, public hospitals, and retail pharmacies.</li><li>Proven track record in brand management, product launches, and marketing strategy execution within the hospital or institutional care segment.</li><li>Customer-oriented with excellent interpersonal and communication skills.</li><li>Demonstrated ability to work collaboratively within cross-functional teams.</li><li>Exposure to digital marketing initiatives and analytics-driven campaigns is preferred.</li><li>Highly detail-oriented, with strong problem-solving and analytical skills.</li><li>Excellent verbal, written, and presentation abilities.</li><li>Strategic thinker with a performance-driven approach.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: Supplier Management &amp; Development: <ul><li>Identify, evaluate, and onboard new suppliers to support business requirements.</li><li>Conduct supplier audits and performance assessments to ensure quality and reliability.</li><li>Develop and maintain strong supplier relationships to improve lead times, cost, and supply chain efficiency.&nbsp;</li></ul> Cost Management &amp; Negotiation: <ul><li>Analyze cost structures and negotiate favorable terms for materials and components.</li><li>Support cost-reduction initiatives through competitive bidding, alternative sourcing, and value engineering.</li><li>Collaborate with finance and procurement teams to optimize the sourcing budget.</li></ul> Technical &amp; Cross-Functional Collaboration: <ul><li>Work closely with engineering, R&amp;D, and manufacturing teams to define sourcing requirements.</li><li>Ensure suppliers meet technical specifications and quality standards.</li><li>Support new product development by identifying suitable suppliers for prototypes and production.&nbsp;</li></ul> Supply Chain Optimization &amp; Risk Mitigation: <ul><li>Monitor market trends and risks to ensure a stable and competitive supply chain.</li><li>Develop strategies to mitigate supplier risks related to quality, pricing, and geopolitical factors.</li><li>Optimize sourcing strategies to reduce lead times and ensure on-time delivery.</li></ul> Requirements: Required Qualifications &amp; Skills: Education &amp; Experience: <ul><li>Bachelor’s degree in mechanical engineering, Electrical Engineering, Supply Chain Management, or a related field.</li><li>5+ years of experience in sourcing, procurement, or supplier management (preferably in automotive, electronics, or manufacturing industries).</li></ul> Technical &amp; Soft Skills: <ul><li>Strong negotiation and analytical skills.</li><li>Experience in working with SAP systems and sourcing tools.</li><li>Knowledge of supplier qualification processes, cost analysis, and risk assessment.</li><li>Familiarity with engineering drawings, specifications, and manufacturing processes.</li><li>Excellent communication, stakeholder management, and problem-solving abilities.</li></ul>

Responsibilities: <ul><li>Management of finance team to ensure delivery of timely, accurate monthly accounts, preparation of the financial pack and KPIs.</li><li>The key focus will be to drive financial and business improvements in the Filter Products manufacturing site and to act as a business partner to the local GM and management team.</li><li>Support is also required for the local Distribution business.</li><li>Review site month end financials, prepare variance analysis with supporting commentary consolidate for the Hungary region.</li><li>Drive site Gross margin and Non-productive spend initiatives.</li><li>Prepare and review customer and product analysis (pricing, revenue and margin).</li><li>Drive working capital improvements including cash collection and inventory management.</li><li>Ensure that standard costs are maintained and implemented across the product range in the Filter Products manufacturing site.</li><li>Review site control files and trial balances to ensure no financial risk to the business and instil robust financial controls.</li><li>Ensure that all sites comply with the Filtrona Accounting Manual (EAM).</li><li>To support the businesses in the preparation of the annual Plan and quarterly forecasts for the region and associated presentations and packs.</li><li>Review of all capex appraisals pre sign off and follow up on actual spend v plan.</li><li>Attend and present the financials at the monthly operational reviews.</li><li>Legal and banking signatory for the Filter Products business and sign off monthly payroll run.</li><li>Review monthly FX hedging forecasts and submissions to Group Treasury</li><li>Deal with Group, SBU and Regional FD requests</li><li>Lead the preparation for the Hungarian internal and external audits.</li><li>Develop staff and identify training needs within the team. Document standard procedures.</li><li>Keeping the HSE-, fire safety- and hygiene rules, wearing the relevant personal protective equipment.</li><li>During the daily work meeting the expectations of the Integrated Management System regulations.</li></ul> Requirements: <ul><li>Educated to degree level (potentially in Finance, Accounting, or Economics); professional accounting qualification.</li><li>10 years PQ experience within a manufacturing environment is essential.</li><li>High level of numeracy and IT literate (Excel/PowerPoint).</li><li>Excellent English written and oral communication skills.</li><li>Audit background</li><li>ERP system knowledge</li><li>Project management knowledge and experience</li></ul>

Role Description: <ul><li>The QC Chemist will be a critical member of the laboratory team responsible for performing analytical testing to ensure the quality, safety, and compliance of sterile injectable IV bag products at a newly established greenfield pharmaceutical manufacturing facility.</li><li>This role will support the development, validation, and execution of analytical methods, ensure timely release of raw materials, in-process samples, and finished products, and maintain strict adherence to cGMP, FDA, and global regulatory standards.</li><li>The QC Chemist will play a key role in establishing laboratory operations during the startup phase and sustaining high standards of laboratory excellence throughout routine commercial production.</li></ul> Responsibilities: <ul><li>Perform analytical testing of raw materials, in-process samples, stability samples, and finished products using validated methods (e.g., HPLC, GC, UV-Vis, FTIR, TOC, etc.).</li><li>Develop and validate new analytical methods as required to support product development, regulatory submissions, and process optimization.</li><li>Ensure compliance with cGMP, FDA, USP, and other regulatory standards in all laboratory activities, documentation, and data integrity.</li><li>Prepare and review laboratory documentation including test protocols, reports, COAs, deviations, OOS investigations, and change control documentation.</li><li>Maintain laboratory instruments, perform routine calibrations, troubleshooting, and coordinate with vendors for preventive maintenance and repairs.</li><li>Support laboratory readiness for regulatory inspections, audits, and customer visits by maintaining audit-ready documentation and laboratory practices.</li><li>Assist in the preparation and execution of laboratory investigations, CAPA implementation, and root cause analysis for any analytical deviations.</li><li>Collaborate with cross-functional teams including Manufacturing, Quality Assurance, Validation, and Regulatory Affairs to ensure seamless batch release and product compliance.</li><li>Participate in training programs to ensure technical competency and adherence to evolving regulatory requirements.</li><li>Contribute to continuous improvement initiatives focused on laboratory efficiency, data integrity, and compliance robustness.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s or master’s degree in chemistry, Pharmaceutical Sciences, or related field.</li><li>3+ years of experience in pharmaceutical QC laboratory, preferably in sterile injectable manufacturing.</li><li>Strong hands-on experience with analytical instrumentation (HPLC, GC, UV, FTIR, etc.) and GMP-compliant laboratory operations.</li><li>Knowledge of FDA cGMP regulations, USP standards, ICH guidelines, and data integrity expectations.</li><li>Experience supporting laboratory investigations and regulatory inspections.</li></ul> Skills/Competencies: <ul><li>Strong analytical and problem-solving skills.</li><li>High attention to detail and accuracy in laboratory work.</li><li>Good understanding of data integrity and documentation practices.</li><li>Ability to work both independently and as part of a team in a dynamic startup environment.</li><li>Excellent organizational, time management, and communication skills.</li><li>Ability to adapt to evolving processes and regulatory requirements in a greenfield manufacturing setting.</li></ul>

Responsibilities: <ul><li>Design, develop, and maintain integrations with DocuSign CLM+ and eSignature APIs.</li><li>Implement and customize contract lifecycle management workflows.</li><li>Develop robust backend components using Java and C# to support business logic and integrations.</li><li>Work with XML and XSLT for document transformations and data interchange.</li><li>Build and manage stored procedures, packages, and triggers using Oracle PL/SQL.</li><li>Utilize Eclipse for Java development and Visual Studio for C# development.</li><li>Configure and support CI/CD pipelines using Azure DevOps.</li><li>Collaborate closely with business analysts, architects, QA, and infrastructure teams.</li><li>Troubleshoot and resolve integration and application issues across environments.</li><li>Create and maintain technical documentation and contribute to best practices.</li></ul> Requirements: <ul><li>8+ years of experience in enterprise application development.</li><li>Proficiency with DocuSign CLM+ (contract templates, workflow design, API integration).</li><li>Strong experience with DocuSign eSignature API and embedded signing flows.</li><li>Solid programming skills in Java and C#.</li><li>Expertise in XML and XSLT for document parsing and transformation.</li><li>Strong knowledge of Oracle Database and PL/SQL development.</li><li>Experience using Eclipse IDE and Visual Studio for software development.</li><li>Hands-on experience with Azure DevOps for version control, CI/CD pipelines, and environment management.</li><li>Strong analytical, communication, and problem-solving skills.</li></ul>

Skills

Industry

Location

Jobtitle

132 analytical method validation Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Finance Controller

QC Chemist

Docusign Developer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

132 analytical method validation Jobs found

Environmental Health and Safety (EHS) Manager

Senior Electrical Engineer

Executive Assistant to Group CEO (Operations – Steel & Power)

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Finance Controller

QC Chemist

Docusign Developer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.