ASC Maintenance Engineering Specailist

Maintenance Engineering Specialist

ASC Manufacturing Knowledge Engineer - Maintenance

Mechanical-Rotating Equipment Engineer

Reliability Engineering (HdGP)

Cost Engineer ( GM )

ASC Cost Engineer

Mechanical Engineer

Maintenance Engineer II (Electrical)

Maintenance Electrical Engineer

Responsibilities: You are expected to be able to perform the following: <ul><li>Develop maintenance processes, maintenance management strategy, work and performance management strategy and conduct Maintenance health assessment in line with GME and corporate requirements. This includes PM and PdM strategies, Org. structures, manpower analysis, cost analysis, etc., and appraise and prepare reports on the effectiveness of such processes.</li><li>Conduct data driven analyses to benchmark maintenance organization’s performance to identify gaps then set sustainable plan to close the gaps, this includes, but not limited to: Spending Analysis, Maintenance Effectiveness, operating costs of existing assets, PM, and PdM, Wrench time analysis, SAP Taxonomy, Planning &amp; Scheduling, Personnel Competency, Budgeting Strategy, Bad Actors, and RAM Modeling.&nbsp;</li><li>Analyze facilities’ maintenance performance to establish reference baseline &amp; Issue frequent maintenance benchmarking reports to promote knowledge.</li><li>Review maintenance reporting mechanism and KPIs along with their trends to drive performance and provide recommendations accordingly.</li><li>Analyze maintenance spending in terms of manpower, equipment, materials procurement and outsource strategies.</li><li>Assist the line maintenance organizations in the implementation of approved programs such as TPRM or GM reliability model.</li><li>Develop methods and programs for handling new situations in maintenance fields. This will include prototype pumps, motors, compressors, turbines, valves, instrument systems and computer systems.</li><li>Design, in conjunction with engineering personnel and vendor representatives, alternative parts or systems.</li><li>Represent AMSD on standing Committees, Special Task Groups or Ad Hoc Committees.</li><li>Recommend work which can be economically assigned to contractor organizations and develops scope of work.</li><li>Report to concerned Maintenance Supervisor &amp; Manager on quality and quantity of workmanship and adherence to standards within his assigned areas and recommends improved work methods.</li><li>Ensure that periodic maintenance is performed in accordance with vendor recommendations and Companys procedures and that maintenance logs and records are maintained.&nbsp;</li><li>Reviews Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Prepare Engineering Reports on maintenance activities/methods and means for their improvement.&nbsp;</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Engineering from a recognized and approved program. </li><li>A Mechanical Engineering Degree is preferred.</li><li>You will have a minimum of ten years of relevant experience in the Oil &amp; Gas downstream Sector.</li><li>You will be able to demonstrate high degree of technical competence in the area of maintenance programs and practices.</li><li>You will have experience with risk-based processes such as Reliability-Centered Maintenance &amp; Risk Based Maintenance</li><li>You will have experience with TotalProductive Maintenance</li><li>You must have strong hands-on experience with Spare Parts and Materials procurement strategies</li><li>You will have Best-in-class Maintenance Planning, Scheduling and Work Prioritization experience</li><li>You must have strong Experience with Maintenance budgeting and spending control methodologies.</li><li>You will have Experience in field maintenance methodologies, processes, and procedures.</li><li>You will be able to demonstrate strong interpersonal &amp; communication skills.</li><li>You will be able to demonstrate strong analytical &amp; problem-solving skills</li><li>You will be able to demonstrate experience with CMMS such as SAP</li><li>Conversant with MS Office applications</li><li>You will be able to demonstrate ability to work under pressure and meet deadlines</li><li>You will be able to demonstrate fluency in spoken and written English</li></ul>

Responsibilities: <ul><li>Analyze maintenance spending in terms of manpower, equipment, materials procurement and outsource strategies.</li><li>Assess planning and scheduling, wench time, benchmarks, KPI, PM and predictive maintenance (PdM) effectiveness.&nbsp;</li><li>Assure completion of assigned maintenance work for a given maintenance function, cascade to team and mentor the requirement to junior GC maintenance engineers.</li><li>Conduct a data driven analysis to benchmark maintenance organization’s performance to identify gaps then set a sustainable plan to close the gaps, in fields including: Total spend analysis, Maintenance programs effectiveness, Total life-cycle costs of new assets, Current operating costs of existing assets, Preventive and predictive maintenance strategies, Value creation as cost saving / cost avoidance, Wench time vs plan, SAP structure table and equipment classification, Planning and schedule effectiveness, Technician competency and qualification program, Maintenance budget strategy, Capital project and Reliability, Availability and Maintainability (RAM) model amongst others.</li><li>You will benchmark and prepare reports on the effectiveness of such processes.</li><li>Work on enterprise level to forecast procurement (materials and services) strategy for annual demand per facility.</li><li>Assist in the implementation of approved programs information, authoritative interpretation, operating pilot runs, conducting training sessions.</li><li>Assess T&amp;I and turnaround programs per facility.</li></ul> Requirements: <ul><li>You must hold a bachelor degree in Mechanical / Industrial Engineering.</li><li>You should have a minimum of 10 years’ work experience in refining or petrochemical facilities.</li><li>You should be able to demonstrate the highest degree of technical competence in the area of maintenance programs and activities.</li></ul> Strong hands-on experience in oil &amp; gas maintenance organization in following fields is preferred: <ul><li class="ql-align-justify">Risk-based processes such as Reliability-Centered Maintenance,</li><li class="ql-align-justify">Risked Based Maintenance</li><li class="ql-align-justify">Totally Productive Maintenance.</li><li class="ql-align-justify">Spare parts, general materials procurement strategies</li><li class="ql-align-justify">Maintenance techniques and programs</li><li class="ql-align-justify">Best-in-class Maintenance Planning, Scheduling and work prioritization</li><li class="ql-align-justify">Maintenance budgeting and spending control methods</li><li class="ql-align-justify">Field maintenance methodology</li></ul>

Responsibilities: You are expected to be able to perform the following: <ul><li>Produce KM SOPs to guide KM efforts within the organization and assist implementation of the KM structure, practices, and governance model.</li><li>Provide leadership and technical advisory for the assigned CoPs/Networks and expert forums to share lessons at scale&nbsp;</li><li>Publish CoPs/Networks minutes and recommendations</li><li>Manage the outcome of the assigned CoPs/Networks including the actions and AFIs monitoring as well as Publishing CoPs/Networks minutes and recommendations</li><li>Conduct site visits and workshops to capture tacit knowledge&nbsp;</li><li>Develop structured processes and tools to document best practices for the CoPs/Networks.</li><li>Contribute to the design and content of GME Knowledge Hub platforms</li><li>Assist with training programs and ensure adoption of expertise</li><li>Manage the outcome of the assigned CoPs/Networks including the actions and AFIs monitoring.&nbsp;&nbsp;</li><li>Track metrics that demonstrate knowledge impact on KPIs</li></ul> Requirements: <ul><li>As the successful candidate you will hold Bachelor’s degree in Mechanical or Electrical Engineering or similar. An advanced degree is preferred.&nbsp;</li><li>You will have a minimum of ten years of experience in assets or maintenance management in the refining business along with the associated Maintenance solutions, Turnaround and Reliability management systems in order to be able to manage the related CoPs/Networks.&nbsp;</li><li>Knowledge Management Professional Certification (KMP) from the (KMPro) is preferred.&nbsp;</li><li>Project Management Professional Certification (PMP) from the (PMI) is preferred.&nbsp;</li><li>You will have Expertise in 2+ key manufacturing domains such as operations, maintenance, HSE</li><li>You will have Experience leading multi-site continuous improvement projects</li><li>You be able to demonstrate proficiency in knowledge engineering methodologies and digital tools</li><li>You will be able to demonstrate strong communication, collaboration and change management skills</li><li>You will have the ability to distill technical expertise for multi-disciplinary audiences</li><li>Fluency in multiple languages is a plus given global responsibilities.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix Rotating Equipment and mechanical systems</li><li>Develop the engineering designs packages for the new installation and upgrade projects</li><li>Review Project Proposals and Detailed Designs packages for new facilities</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I)</li><li>Update and maintain engineering documentation and drawings</li><li>Analyze system performance and find solution for Energy saving</li><li>Ensure quality, cost effective and timely solutions to any upgrade</li><li>Make recommendations for technical/economic optimization of existing facilities</li><li>Lead feasibility/profitability studies for new facilities</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provides analysis, evaluation and interpretation in support of projects, processes, and financing related to companies capital investment decisions.</li><li>Maintains and expands on contacts within the industry.</li><li>Regularly interacts with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>A bachelors Degree in Mechanical Engineering from an accredited university, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential</li><li>Minimum of 15 years of work experience including experience years in the industrial operation facility, Shale gas facility is preferred. Also, has a good knowledge of the Modular skids mounted unit.</li><li>Must have a working knowledge of industry codes and standards, such as ASME and API, such as API-STD-610 and 617</li><li>Experience with creating/modifying PFDs, and P&amp;IDs</li><li>Experience with troubleshooting and major repair of oil and gas rotating equipment, such as air compressors, pumps and Diesel generators</li><li>Experience in creating schematics and piping diagrams</li><li>Conduct failure analysis and provide recommendations for failed rotating equipment</li><li>Experience with rotating equipment and piping field Installation, Commissioning and testing</li><li>Experience in specifying piping and equipment layout</li><li>Capable of communicating with multidiscipline engineers to complete projects</li><li>Proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organization</li><li>Strong written and oral communication skills. Able to communicate what are frequently complex technical, economic and commercial concepts in a clear and succinct manner to individuals and groups from diverse professional backgrounds.</li></ul>

Responsibilities: <ul><li>Provide technical expertise to reduce repetitive failures of rotating equipment in addition of supporting plant maintenance activities implanting reliability program to improve plant performance.</li><li>Coordinates maintenance programs with user units to determine relative priorities and on-time completion of work in critical operating facilities with available work force.</li><li>Plans assigned T&amp;Is field-wide, analyses and sequences all work requests; estimates required manpower, justifying when necessary requests for additional manpower, overtime or extension of unit downtime.</li><li>Assures that all details of material and equipment are available at jobsite. On major T&amp;Is, he may direct one or more Maintenance Engineer III in accomplishing this phase of the work.</li><li>Execute the actual work during a T&amp;I period, coordinates activities of assigned craftsmen and such other personnel as are assigned (night shift coordination, etc.) to assist in the execution of the work.</li><li>Incumbent may act as the day shift coordinator on T&amp;Is or direct the activities of one or more Maintenance Engineer IIIs assigned to this phase of the work.</li><li>Report to concerned Maintenance Supervisor on quality and quantity of workmanship and adherence to standards by Maintenance Engineer III and craftsmen within his assigned areas and recommends improved work methods.</li><li>Reports on deviation from approved schedules and assists in the correction of such deviations</li><li>Review Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Coordinate maintenance work between Maintenance Divisions when services from various divisions are required.</li><li>Perform special assignments as directed, utilizing his engineering knowledge and experience. </li><li>Such assignments may include work direction to one or more Maintenance Engineer IIIs.</li><li>Application of Maintenance Engineer when specializing in Digital Maintenance Engineering Performs engineering analysis of real time, process control digital systems in central operations facilities to aid in fault diagnosis. Evaluates</li><li>Maintenance activity on digital systems.</li><li>Provides professional level expertise to the solution of complex hardware problems.&nbsp;</li><li>Responsible, under the general direction of Superintendent in assigned Maintenance Division and with work direction from maintenance.</li></ul> Requirements: <ul><li>The successful candidate should hold a minimum of Bachelor Degree in Mechanical Engineering. Fifteen (15) years of experience in Oil &amp; Gas or Petrochemical Industry.</li><li>In addition, the candidate should be certified Maintenance &amp; Reliability Professional (CMRP) and TapRooT Analyst.</li><li>Also, the candidate should be good spoken and written of English language.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: <ul><li>Provide technical solution whenever machines experience failures, utilizing sound maintenance strategies to analyze, address and rectify the root causes in order to prevent reoccurrences.</li><li>Troubleshoot equipment failures &amp; performance.</li><li>Utilize knowledge and familiarity with the international standards in order to improve the equipment performance.</li><li>Implement the best-in-class solutions pertaining to all equipment, as foreseen by international standards and other internal company standards.</li><li>Lead efficiency improvement initiates &amp; upgrading programs &amp; project for all equipment.</li><li>Propose changes in operating modes, or technological improvement, or maintenance strategies implementation, in order to support the company vision of continuous improvement throughout collaboration and people conversation.</li><li>Utilize the best-in-class monitoring maintenance &amp; reliability tools (SAP, iMOM, GE MERIDIUM) to support decisions in case of failures, or abnormal operating conditions.</li><li>Provide technical support to the maintenance team to enhance preventive maintenance strategies and checks, along with predictive maintenance strategies and operation-based maintenance checks.</li><li>Provide mentorship to lesser-experienced engineers. Generate development plans for them, assist them during the entire path of their knowledge growth.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Mechanical or Electrical Engineering from a recognized and approved program.</li><li>You should have a minimum of 10 years’ experience in a maintenance engineering position.</li><li>You should be able to demonstrate a thorough knowledge of engineering practices.</li><li>You should be FE certified.</li><li>Preferred to be certified in CMRP or PMP.</li></ul>

Responsibilities : <ul><li>Provide consultation in all aspects of normal and emergency plant maintenance procedures and standards</li><li>Provide technical support to electrical maintenance and machine shop daily operation</li><li>Ability to perform a stator rewind, testing and vibration analysis for high voltage electric motor </li><li>Support installation, maintenance and repair of electric motor and generator </li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements </li><li>Introduce the latest technology in repair methodology</li><li>Ability to design engineering packages</li><li>Provide coaching and knowledge sharing to junior engineers</li><li>Participate in vendor/customer exchange meetings to address questions and concerns</li><li>Participate in standards value engineering</li><li>Assist in Corrective &amp; Preventative Action resolution</li><li>Participate in internal or customer equipment drawing reviews&nbsp;</li><li>Provide specialized engineering assistance to the repair units. This may be through the in-house MSSD engineering specialists or from elsewhere in the Saudi Aramco organization</li></ul> Requirements : <ul><li>Bachelor’s Degree in Electrical Engineering with a minimum of Seven years’ hands on experience in Electrical field as stipulated above under position description. Candidate must have the following the field experience requirements.</li><li>Experience with electrical equipment with applications in the refining, petrochemical and gas processing industries.</li><li>Experience in manufacturing with original high voltage electric Motor equipment manufacturing facility such as, ABB, Siemens, WEG, Alstom, and Westinghouse for motor and generator.</li><li>Excellent command on English reading and writing.</li></ul>

Responsibilities :&nbsp; <ul><li>Provide consultation in all aspects of normal and emergency plant maintenance procedures and standards</li><li>Provide technical support to electrical maintenance and machine shop daily operation</li><li>Ability to perform a stator rewind, testing and vibration analysis for high voltage electric motor</li><li>Support installation, maintenance and repair of electric motor and generator</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements</li><li>Introduce the latest technology in repair methodology</li><li>Ability to design engineering packages</li><li>Provide coaching and knowledge sharing to junior engineers</li><li>Participate in vendor/customer exchange meetings to address questions and concerns</li><li>Participate in standards value engineering</li><li>Assist in Corrective &amp; Preventative Action resolution</li><li>Participate in internal or customer equipment drawing reviews</li><li>Provide specialized engineering assistance to the repair units. </li><li>This may be through the in-house MSSD engineering specialists or from elsewhere in the Saudi our client organization.</li></ul> Requirements :&nbsp; <ul><li>Bachelor’s Degree in Electrical Engineering with a minimum of Nine years’ hands on experience in Electrical field as stipulated above under position description.</li><li>Experience with electrical equipment with applications in the refining, petrochemical and gas processing industries.</li><li>Experience in manufacturing with original high voltage electric Motor equipment manufacturing facility such as, ABB, Siemens, WEG, Alstom, and Westinghouse for motor and generator.</li><li>Excellent command on English reading and writing.</li></ul>

Skills

Industry

Location

Jobtitle

473 asc maintenance engineering specailist Jobs found

ASC Maintenance Engineering Specailist

Maintenance Engineering Specialist

ASC Manufacturing Knowledge Engineer - Maintenance

Mechanical-Rotating Equipment Engineer

Reliability Engineering (HdGP)

Cost Engineer ( GM )

ASC Cost Engineer

Mechanical Engineer

Maintenance Engineer II (Electrical)

Maintenance Electrical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

473 asc maintenance engineering specailist Jobs found

ASC Maintenance Engineering Specailist

Maintenance Engineering Specialist

ASC Manufacturing Knowledge Engineer - Maintenance

Mechanical-Rotating Equipment Engineer

Reliability Engineering (HdGP)

Cost Engineer ( GM )

ASC Cost Engineer

Mechanical Engineer

Maintenance Engineer II (Electrical)

Maintenance Electrical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.