Petroleum Refining Laboratory Scientist

Onshore Geotechnical Engineer

Civil Materials Engineer

Corrosion Engineer

Principal Engineer

Analyzer Engineer

Piping & Valves Engineer

Mechanical Piping Engineer

Responsibilities: <ul><li>Calibrate and troubleshoot lab equipment, acquire new technologies and updating lab records.							</li><li>Implement lab test methods and assure the in-use lab tests methods are up-to-date.							</li><li>Train lab personnel on lab analyzers and laboratory test methods.							</li><li>Develop quality system related to lab equipment.							</li><li>Conduct Lab Analytical Studies and issue reports.							</li><li>Address lab clients’ requests.							</li><li>Implement safety rules on area of responsibility.							</li><li>Update lab management on lab operations.							</li><li>Purchasing labware materials such as; Chemicals, Equipment and others.							</li><li>Improve the safety and quality of the assigned testing areas.							</li><li>Optimize laboratory resources.							</li><li>Seek and adapt latest technologies and implement them at RTA-Lab.							</li><li>Give technical presentations and share knowledge.							</li><li>Participate in incident investigation activities concerning laboratory/ plants processes as required.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemistry.&nbsp;An advanced degree is preferred.							</li><li>You should have a minimum of 10 years’ experience working in Petroleum Refining Laboratory.							</li><li>You should be fully aware of ISO17025 – preferable a certified ISO17025 auditor.							</li><li>Experience in instrumental analytical methods such as; GC, ICP, AAS, IR, UV-VIS is required.							</li><li>Experience in tests methods related to crude oil and its refined products reference test methods like: ASTM, IP, SMS, UOP and others is also a requirement.							</li><li>You should be knowledgeable in quality control methods used at analytical laboratory.							</li><li>Experience in operating commonly used lab analyzers related to petroleum industry is preferred.							</li><li>Experience in using laboratory LIMS system is a must.							</li><li>You should have knowledge of statistical quality control laboratory methods.	</li></ul>

Responsibilities:&nbsp; <ul><li>Review and revision of capital projects and introducing qualified nonmetallic products in the engineering design packages, including; water plants, gas plants, GOSPs, and terminals. Attend project review meetings in Kingdom as needed.</li><li>Strength in offering geo-intelligence solutions for mega construction, infrastructure, and natural resources.</li><li>Lead or be a team member in specialized tasks, such as incident investigation teams, special audit teams, organizational improvement teams, etc.</li><li>Conduct analysis and design of onshore geotechnical matters using geotechnical analysis software such as Plaxis, Slope W, Apile.</li><li>Develop and interpret code and standard requirements for onshore geotechnical designs.</li><li>Assess and carry out full geotechnical analysis, including bearing capacity, settlements, liquefaction, piles, soil improvement, excavation design, etc.</li><li>Develop new specifications and update existing standards, procedures and best practices. Lead value engineering sessions for onshore geotechnical and update accordingly.&nbsp;</li><li>Serve on international standards writing bodies as the opportunity allows.</li><li>Conduct Vendor technical assessments for geotechnical related matters and commodities.</li><li>Conduct technical foundations inspections and assessments of existing structures.</li><li>Support ongoing Innovation/Technology programs and strategic initiatives.</li><li>Assess new and emerging technologies for civil/geotechnical applications.</li><li>Act as a professional mentor providing training courses to develop geotechnical engineers and specialists.</li><li>Publish technical papers in refereed journals and international conferences.</li><li>Forensic engineering studies to evaluate risk of existing sinkholes situation and feasibility of optimum treatment at various cases.</li><li>Forensic engineering studies to evaluate problems in relation to settlements, slope failure, investigations, sand movement mitigations, foundations selections.</li></ul> Requirements:&nbsp; <ul><li>Candidate must have a Bachelor’s Degree in Civil/Geotechnical Engineering. Master’s Degree is a plus.</li><li>Professional Engineering or Chartered Engineering Certification.</li><li>Minimum ten (10) years of professional engineering design experience within the oil and gas industry.</li><li>Familiarity with ASTM, BS and other geotechnical design standards.</li><li>Strong consulting experience: root cause analysis, trouble shooting, problem solving.</li><li>Excellent knowledge in advance geotechnical investigation, geophysical surveys including microgravity surveys, resistivity surveys, advanced laboratory testing and soil parameter estimation.</li><li>Knowledge in International Engineering Standards and Material Specifications, including experience in participating and developing Engineering Standards for onshore geotechnical.</li><li>Good experience in the oil and gas industry. Affiliation with professional societies is highly desirable.</li><li>Good presenter, high convincing ability, good technical report and paper writing skills, and ability to mentor and teach nonmetallic courses to engineers.</li><li>Proficient in geotechnical engineering design software (Plaxis, Slope W, Apile)</li></ul>

Responsibilities :&nbsp; <ul><li>Perform review of engineering design packages prepared by others in support of ongoing Capital and Maintain Potential projects</li><li>Develop and interpret code and standard requirements for concrete and civil designs</li><li>Participate in Engineering Standard development and reviews</li><li>Conduct vendor technical assessments for manufacturers of concrete, asphalt, precast concrete and cement mortar lining and similar commodities</li><li>Conduct technical/structural inspections and assessments of existing structures.</li><li>Conduct condition assessment of existing concrete structures, infrastructure and assets.</li><li>Conduct condition assessment and failure evaluation of asphalt pavements for roads, parking and airfields.</li><li>Develop and review plans and/or scope of work for repair or rehabilitation of concrete and civil structures.</li><li>Develop and review hydrology and Storm water management plans and specifications.</li><li>Support ongoing Innovation/Technology programs and strategic initiatives</li><li>Assess new and emerging technologies for civil/structural applications</li><li>Act as a professional mentor to developing structural engineers and specialists</li></ul> Requirements :&nbsp; <ul><li>Candidate must have a Bachelor’s Degree in Civil Engineering from an accredited university. Master’s Degree is a plus.</li><li>Professional Engineering or Chartered Engineering Certification</li><li>Minimum eight (8) years of professional engineering experience</li><li>In-depth knowledge and experience in: concrete mix specifications, suitability and compliance; precast and prestressed concrete design, manufacturing and installation; concrete repair and durability; sulfur pit design and specification; specification, use and quality control of construction materials; roofing, water/weather proofing and sealing design and material specification; epoxy, grouting and adhesive materials; road design, construction and specification; asphalt pavement mix design, assessment and maintenance; Construction material testing procedures and laboratory data interpretation; hydrology and stormwater management and design principles; use of non-metallic materials in building and construction; and sustainable construction materials and methods.</li><li>Familiarity and good understanding of ACI, ASTM, ASCE, AASHTO and FAA codes and standards for concrete, pavement and civil materials</li></ul>

Responsibilities: <ul><li>Provide expert advice and assistance to the UR, outside vendors, manufacturers, and design firms on corrosion engineering matters.</li><li>Originate and carry out engineering studies to determine potential problems and remedies to existing problems, resolve complex technical problems.</li><li>Generate and monitor corrosion monitoring programs and corrosion monitoring devices (coupons/probes).</li><li>Review and monitor pipeline corrosion management (scraping/ILI).</li><li>Inspect installations in factories and in the field and participate on the testing &amp; commissioning of new facilities and Turnaround and Inspection (T&amp;I).</li><li>Investigate and analyze failures in operational facilities and provide remedial actions.</li><li>Review and monitor cathodic protection (CP) performance.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Evaluate and introduce best practices and new technologies from all over the world to help the UR to achieve best in class positions.</li><li>Work on or with task forces assigned to investigate incidents or solve specific problems.&nbsp;</li><li>Perform cost analyses and value engineering studies as appropriate.&nbsp;</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Conduct seminars in the resolution of technical problems with personnel in other engineering organizations.&nbsp;</li><li>Write papers for peer-reviewed journals on engineering studies and projects the candidate has overseen.</li></ul> Requirements:&nbsp; <ul><li>A bachelor’s degree in engineering.&nbsp;</li><li>A master’s degree or a Ph.D. in corrosion engineering is highly desirable as well as a Professional Engineer (P.E.) license, NACE and API certifications.</li><li>Minimum 15 years of professional experience in the field of corrosion engineering, including experience as an engineer in charge of technical work in corrosion engineering.&nbsp;</li><li>Experience working with unconventional resources would be an advantage.</li><li>You will have achieved industry recognition through activities in professional societies and industrial organizations, such as ASME, ASCE, ASTM, API, NACE, SEI, and others.</li><li>As the successful candidate you will be expected to work in remote areas depending on the project you are assigned to.</li></ul>

Responsibilities: <ul><li>Defines design requirements and hardware specifications based on customer or user requirements.</li><li>Contributes to the development and documentation of electronic system architectures.</li><li>Lead the creation of designs of analog and digital electronic circuit schematics for microcontroller based systems, meeting performance objectives.</li><li>Analyzes circuits using calculation and simulation methods to assess performance limits, effects of environmental and load stresses, and timing interfaces to ensure consistent performance in safety critical applications.&nbsp;</li><li>Good knowledge on Power Integrity, Power Sequencing, LTSpice, Pspice.</li><li>Ensures successful integration of electrical design with mechanical and software elements of the system.</li><li>Completes deliverables related to design of systems and sub-systems of the overall electrical architecture.</li><li>designing product with multiple power sources like AC/DC, DC/DC, Battery Pack, AA Battery.</li><li>Develops, modifies, and approves electrical design documentation, specifications, and drawings.</li><li>Supervises/coordinates an engineer and/or technician on assigned work</li><li>Defines appropriate test methods to verify designs meet their performance requirements.</li><li>Directs the layout of circuit assemblies to meet emissions and immunity performance requirements and design for manufacturability guidelines.</li><li>Transitions products to manufacturing and ensures robust products and manufacturing processes.</li><li>Develops and maintains an effective and corroborative working relationship with internal and external development partners.</li><li>Resolves competing constraints between interrelated functions (engineering, purchasing, manufacturing, regulatory, marketing, etc.) required to deliver the product to market.</li><li>Executes protocols and testing required to validate the safety and effectiveness of the design(s).</li><li>Leads the troubleshooting and problem-solving efforts related to electrical aspects of devices and associated systems.</li><li>Creates and communicates design/test plans, tasks, deliverables and status.&nbsp;</li><li>Manages time and resources tomeet committed schedule milestones.&nbsp;</li></ul> Requirements: <ul><li>A demonstrated track record in electromechanical hardware development, preferably medical devices or other highly regulated products such as military hardware.</li><li>Knowledge and experience in design of embedded microcontroller-based electronics products.&nbsp;</li><li>Knowledge of FPGA-based controller design and implementation is an added advantage.</li><li>Experience testing of electronics components/devices to meet Safety regulatory requirements e.g. Immunity, emission, partial discharge etc.</li><li>Knowledge and experience using CAD systems for printed circuit board schematic design and layout (Altium Designer, preferred), Matlab and data acquisition software (LabVIEW)</li><li>Good knowledge of standards such as IEC 60601, IEC 61010, UL, ANSI, AIM and ASTM.</li><li>Specific experience in design and development of sensing subsystems is highly desirable.</li><li>Good experience in designing product with multiple power sources like AC/DC, DC/DC, LithiumIon Battery Pack, AA Battery is highly desirable.&nbsp;</li><li>Graduate or Post Graduate in Electrical or Electronics or related Engineering and 11 to13 years of experience.&nbsp;</li><li>Prior experience in infusion pump domain is a plus</li></ul>

Responsibilities: As the successful candidate, you will be required to perform the following: <ul><li>Develop programs and best practices, monitor KPIs to improve Analyzer performance apply statistical tools to assess analyzer performance.</li><li>Develop and manage equipment strategies as per the site safety and reliability practices.</li><li>Provide subject matter expertise to operating facilities Operations, Maintenance, and Engineering teams by consulting, providing awareness sessions, and participating in and leading technical exchanges and conferences.</li><li>Conduct benchmarks, business case studies, pilot and evaluate new Analyzer technologies to contribute to yield improvement.</li><li>Lead technical sessions such as the design review, model review, and commissioning for Analyzers.</li><li>Analyze chronicle problems and debottleneck complex analyzer problems to improve process operations and economic benefits.</li><li>Review standards and General Instructions and act as leading SME in the Analyzer field.</li><li>Remain abreast of industry standards developments (e.g., ASTM, ISA, ISO, IEC).</li><li>Identify and support opportunities to improve site analyzer performance.</li><li>Lead project execution for project proposals, initiatives, studies, and continuous improvement of solutions and problem solvers.</li><li>Develop project design specifications for analyzer systems</li><li>Perform analyzer engineering calculations (e.g., fast loop lag time, probe wake frequency, ventilation requirements, phase envelopes)</li><li>Support cost estimation for analyzers and analyzer systems</li></ul> Requirements: <ul><li>You must have a bachelor’s degree in Electrical engineering, Industrial Engineering, or its equivalent.</li><li>You should have a minimum of 12 years of experience with Analyzers with at least 7 years of experience with online Process Analyzers in the oil &amp; gas, refining, or petrochemical industry, or related industries.</li><li>You must be able to demonstrate knowledge and working experience in various analytical chemistry techniques (Gas Chromatography, Mass Spectrometry, Infrared &amp; Ultraviolet Spectroscopy) Physical Property Analyzers and Gas Detectors.</li><li>As well a strong understanding in key oil and gas, petrochemical or refining processes and their associated analyzer applications.</li><li>You should be experienced in Analyzer communication/transmission protocol and networking consideration for interface to Distributed Control Systems (DCS).</li><li>And be able to demonstrate knowledge of Industry standards, country-specific regulations, and local codes.</li><li>An understanding of refinery facilities, Feedstock/products movements, refinery margins, giveaways, and process yields is essential.</li><li>You should have strong analytical and troubleshooting skills in the field of analyzers.</li><li>You should also possess strong leadership skills to manage lead technical dialogues and steer technical teams.</li></ul> Knowledge, skills, and experience in any of the following areas will be an added advantage: <ul><li>Multivariate model-based analyzer applications for unique process measurements;</li><li>Multiple open platforms (e.g., MATLAB, Pirouette) to develop models;</li><li>OPC servers/Analyzer Data Network and DCS/PLC interface</li><li>Data analytics platforms (e.g. JMP, Seeq) and data visualization tools (e.g. Tableau)</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: <ul><li>Design or study mechanical modification to oil and gas processing, oil and gas handling and utilities facilities. Execute capital projects according to the work scope, schedule, and budget.</li><li>Responsible for project development and completion: Preliminary engineering to detail designs to construction and the final and safe turnover to proponent.</li><li>Design development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.</li><li>Participate in HAZOP Studies, FEED review and Detailed Engineering.</li><li>Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.</li><li>Provide input to develop and prepare contracting plan and strategy for solicitation, evaluation, and award of contract for detail engineering, procurement, and construction.</li><li>Review the project schedule, and coordinate and monitor the assigned project’s progress, and challenge below par performance of the contractor.</li><li>Review and resolve day to day contractors’ claims and complaints related to the assigned project (mechanical) work during construction, and ensure HSE compliance</li><li>Ensure compliance to company standards, procedures, policies, and agreed work specifications.&nbsp;</li><li>Fully understand contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications, and project schedule, to support the project manager and/or company representative in the timely completion of project.</li><li>Project Report and implementation of company initiatives during project execution.</li><li>Uphold engineering ethics and maintain high standards of professional behavior and conduct.</li><li>Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.</li><li>Lead multiple concurrent projects, each potentially with one or more support engineers</li><li>Develop and apply piping material classes based on product and project requirements</li><li>Specify insulation, paint, and protective coatings on Piping &amp; Instrumentation Diagrams (P&amp;ID)</li><li>Select and specify manual valves and piping specialty items</li><li>Create and maintain internal specifications, work instructions, and job aids</li><li>Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.</li><li>Develop and implement strategies to improve project planning, cost, schedule, and/or quality.</li><li>Evaluate existing tools and methodologies in your area of expertise and make recommendations on your implementation.</li><li>Conduct special studies in the field of Project Management.</li><li>Participate in the reviews and evaluation of the capabilities of Engineering &amp; Construction contractors, suppliers, and project management related service providers.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractors companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies, FEED review.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in Engineering from a recognized and approved program. A higher degree is preferred. Ideally a Professional Registered Engineer. PMP Certification is desirable but not mandatory.</li><li>You will have seven years of related experience, preferably in the oil industry or similar process industry working in the engineering design and construction phase of projects.</li><li>As a subject matter expert;</li><li>You will have experience in the support of both small- and large-scale capital projects.</li><li>You must be familiar with International Engineering Codes and Standards.</li><li>You will have excellent English communication skills (verbal and written).</li><li>You will have a dynamic attitude towards project improvements and savings.</li><li>Experience in the GCC, Saudi Arabia, or is preferred&nbsp;</li><li>Familiarity with standards preferred.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software.</li></ul> Competencies : <ul><li>Plan &amp; Organize.</li><li>Analyze &amp; Solve problems.</li><li>Safety.&nbsp;</li><li>Influence others.</li><li>Communicating openly &amp; effectively.</li><li>Incorporate Technical Knowledge.</li><li>&nbsp;Intercultural Awareness.</li><li>&nbsp;Advanced Microsoft Excel Knowledge.</li></ul>

Skills

Industry

Location

Jobtitle

8 astm Jobs found

Petroleum Refining Laboratory Scientist

Onshore Geotechnical Engineer

Civil Materials Engineer

Corrosion Engineer

Principal Engineer

Analyzer Engineer

Piping & Valves Engineer

Mechanical Piping Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

8 astm Jobs found

Petroleum Refining Laboratory Scientist

Onshore Geotechnical Engineer

Civil Materials Engineer

Corrosion Engineer

Principal Engineer

Analyzer Engineer

Piping & Valves Engineer

Mechanical Piping Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.