Instrument Engineering (FGP)

Instrumentation Lead

Metering Engineer

Corrosion Engineer

Instrument & Electrical Reliability Engineer

Instrument Engineering

ASC - Control System DCS

Instrumentation Engineer

Control System Engineer

Electrical Design Engineer

Responsibilities: Candidate main duties and responsibilities will include and limited to: <ul><li>Develop Engineering Design scopes and packages.</li><li>Preform control and relief valves sizing.</li><li>Troubleshoot and investigate systems malfunction and provide recommendations to resolve them.</li><li>Conduct engineering job evaluation for plant modifications proposals.</li><li>Perform and coordinate engineering studies.</li><li>Provide Engineering Support for approved Capital Projects.</li><li>Maintain engineering drawings and Mark-up PFD’s, P&amp;ID’s, ILD’s and data sheets.</li><li>Participate in HAZOP review sessions and ensure that all issues are addressed.</li><li>Work closely with vendors, and consultation departments as needed.</li><li>Conduct and Review major studies and Incident Investigations.</li><li>Assist and provide technical consultation to Maintenance and Operation teams.</li></ul>&nbsp;Requirements: <ul><li>As successful candidate you must have a Bachelors degree in Electrical/Instrumentation Engineering with minimum of (15) years of experience as field technical support, in the Oil/Gas industry. Candidate should have hands-on and in-depth knowledge of international standards and codes instrumentation national code (ENC) and NEMA and instrumentation/control systems such as process measurements, Relief/ control/ ESD valves, analyzers, equipment protection system (Vibration/temperature), fire systems and PLCs.</li><li>Participated in HAZOP, PHA, SIS, SIL, Design Review, Lesson learned workshops.</li><li>Knowledge and experience working with instrumentation &amp; control systems such as process instrumentation, DCS, Fire &amp; Gas, ESD Systems, Analyzers &amp; Valves.</li><li>Hands on experience in design calculations for different instrumentation systems such as analyzers, flowmeters, control valves and others.</li><li>Experience in Procurement support is required for RFQ, Technical Evaluations and Vendor Document Reviews.</li><li>Knowledge and experience working with custody metering systems including flow computers, PLC, HMI and other related software and hardware.</li><li>Advanced knowledge of International and our client Standards</li><li>Familiarity with field instrument types and applications is a must.</li></ul> International certifications <ul><li>Certified Automation Professional (CAP)</li><li>Certified Measurement &amp; Verification Professional (CMVP)</li><li>Certified Automation Engineer (CAE)</li></ul>

Responsibilities: <ul><li>Lead the development and implementation of instrumentation design strategies for capital projects, including the specification, selection, and procurement of all related equipment.</li><li>Collaborate with multi-disciplinary engineering teams to ensure the integration of instrumentation and control systems with other plant components.</li><li>Manage and mentor a team of instrumentation engineers and designers, setting clear goals and ensuring professional development.</li><li>Sound understanding I&amp;C Deliverables and managing the delivery for scope of work such as P&amp;ID Development, Control System Architecture &amp; Drawing, Instrument sizing calculations, Instrument Data sheets and Specifications for all inline and Online Instruments, Instrument Installation &amp; Bulk Material Specification/TBE, Vendor drawing reviews, Instrument Index, I/O List, Hook-up Drawings and Installation drawings, Interface drawing/scheme of DCS &amp; PCC/MCC, Interlock logic, terminal details, 3D Modelling (Instruments, Cable Trays, Manifolds etc.), All Layouts - Instrument Location, Junction Box, Cable Trays etc., Instrument Power consumption, Cable Schedule, JB Schedule, Panel Schedule Etc., Cable Block Diagram, JB Wiring Diagram, Instrument Wiring Diagrams, Loop Drawings, Develop Control Narratives, Cause &amp; Effects, &amp; Alarm Points, SIL Study &amp; Report, Telecom &amp; CCTV system and associated wiring, Control Panel Specifications, Layout and Drawings etc.</li><li>Knowledge on AVEVA P&amp;ID, AVEVA Instrumentation, and AVEVA Engineering modules, including the creation of datasheet formats and preparation of I/O lists, instrument lists, electrical load lists, and instrument data browsing.</li><li>&nbsp;Ensure compliance with industry standards, safety regulations, and environmental guidelines.</li><li>&nbsp;Conduct technical reviews, risk assessments, and validation of instrumentation designs.</li><li>Manage vendor relationships to ensure the delivery of high-quality and cost-effective instrumentation solutions.</li><li>Serve as the primary technical contact for instrumentation in project meetings and liaise with counterparts to understand their requirements and provide technical support.</li><li>Monitor project progress, budgets, and schedules, ensuring timely and within-budget delivery of instrumentation scopes.</li><li>Evaluate and implement new technologies and practices to enhance efficiency and effectiveness in instrumentation design.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical, Electronics, or Instrumentation Engineering.</li><li>Minimum of 10 years of experience in instrumentation design for chemical process plants, with at least 4 years in a leadership role.</li><li>Extensive experience with AVEVA Instrumentation and AVEVA Engineering software.</li><li>Strong knowledge of relevant industry standards (ISA, IEC, ANSI, API).</li><li>Proficient with instrumentation design tools and software (e.g., INTOOLS, AutoCAD, MicroStation).</li><li>Excellent leadership, communication, and organizational skills.</li><li>Proven ability to manage and prioritize multiple projects simultaneously.</li><li>Critical thinking and problem-solving skills.</li></ul>

Responsibilities: <ul><li>Provide technical guidance, support, training, and expertise to facility metering team.</li><li>Monitor Instrumentation and metering system performance.</li><li>Assess metering and Instrumentation performance and recommend improvements for system optimization.</li><li>Develop and maintain lifecycle management activities for metering and instrumentation systems.</li><li>Establish and implement auditing guidelines and perform frequent metering systems and instruments audits.</li><li>Lead the development of new strategies and validate the feasibility of improving company productivity.</li><li>Ensure manufacturing knowledge is captured in the knowledge repository and continuous improvement is delivered by benchmarking and best practices.</li><li>Provide awareness sessions and lead technical exchanges and conferences.</li><li>Act as a subject matter expert in Instrumentation and metering systems and contribute to the troubleshooting activities.</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Electrical Engineering, Electronics Engineering, instrumentation and control engineering or equivalent.</li><li>You should have a minimum of 12 years’ experience in metering systems in refining /oil and gas plants/petrochemical industries</li><li>You must have strong analytical and troubleshooting skills in the field of metering systems.</li><li>Familiarity with field instrument types and applications is essential.</li><li>Proficiency in the codes and standards in the oil and gas industry, i.e., API, BS, ISO, ASME, ANSI, IEC, ISA, IEEE, etc. is required.</li><li>You should have working knowledge of oil/gas-related plant processes.</li></ul>

Responsibilities: <ul><li>Provide expert advice and assistance to the UR, outside vendors, manufacturers, and design firms on corrosion engineering matters.</li><li>Originate and carry out engineering studies to determine potential problems and remedies to existing problems, resolve complex technical problems.</li><li>Generate and monitor corrosion monitoring programs and corrosion monitoring devices (coupons/probes).</li><li>Review and monitor pipeline corrosion management (scraping/ILI).</li><li>Inspect installations in factories and in the field and participate on the testing &amp; commissioning of new facilities and Turnaround and Inspection (T&amp;I).</li><li>Investigate and analyze failures in operational facilities and provide remedial actions.</li><li>Review and monitor cathodic protection (CP) performance.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Evaluate and introduce best practices and new technologies from all over the world to help the UR to achieve best in class positions.</li><li>Work on or with task forces assigned to investigate incidents or solve specific problems.&nbsp;</li><li>Perform cost analyses and value engineering studies as appropriate.&nbsp;</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Conduct seminars in the resolution of technical problems with personnel in other engineering organizations.&nbsp;</li><li>Write papers for peer-reviewed journals on engineering studies and projects the candidate has overseen.</li></ul> Requirements:&nbsp; <ul><li>A bachelor’s degree in engineering.&nbsp;</li><li>A master’s degree or a Ph.D. in corrosion engineering is highly desirable as well as a Professional Engineer (P.E.) license, NACE and API certifications.</li><li>Minimum 15 years of professional experience in the field of corrosion engineering, including experience as an engineer in charge of technical work in corrosion engineering.&nbsp;</li><li>Experience working with unconventional resources would be an advantage.</li><li>You will have achieved industry recognition through activities in professional societies and industrial organizations, such as ASME, ASCE, ASTM, API, NACE, SEI, and others.</li><li>As the successful candidate you will be expected to work in remote areas depending on the project you are assigned to.</li></ul>

Responsibilities: People Management <ul><li>Advise and assist Maintenance l&amp;E Engineers, electricians, instrument technicians and production supervisors on complex electrical and instrument repairs and troubleshooting methodologies.</li><li>Support all the efforts towards building a harmonious work environment to promote the spirit of cooperation and team building within the l&amp;E Reliability Section.</li><li>Provide required technical support in matters requiring higher level of expertise and consultation.</li></ul>&nbsp;Instrument &amp; Electrical Assets Integrity <ul><li>Develop and implement Reliability strategies by utilizing conventional techniques such as Reliability Centred Maintenance (RCM), Root Cause Analysis (RCA), Preventive and Predictive maintenance (PPM) strategies, and other industry accepted reliability techniques to analyse l&amp;E equipment failures and produce cost effective strategies to ensure safe and reliable operation of the plant.</li><li>Implement Mechanical Integrity &amp; Quality Assurance best practices. Work with other concerned departments to develop &amp; execute appropriate Quality Assurance (QA) practices and develop a mechanism to assess the effectiveness of QA practices.</li><li>Proactively identify l&amp;E Equipment Reliability Issues and develop engineering solutions for chronic and sporadic equipment reliability problems. Work with technical, production and maintenance to implement solutions.</li><li>Lead Reliability Improvement efforts of the plant from the platform of Reliability Improvement Teams (RITs).</li><li>Perform Root Cause Failure Analysis to identify various failure modes and recommend strategies to help improve l&amp;E equipment reliability.</li><li>Evaluate RCA reports, criticality studies, equipment strategies, and risk assessments on equipment to ensure consistency and compliance with company procedures and policies.</li><li>Evaluate facility incidents that affect reliability and ensure that appropriate RCAs are performed.</li><li>Assist in tracking RCA findings and completing action items in a timely manner .</li><li>Develop Instrumented Protective Systems (IPS) related work processes in the company to comply with regulatory requirements mandated both by International Standards (IEC61511/ISA 84) and Company Standards RMS 5700.</li><li>Administer the development of detailed engineering calculations and drawings including the preparation of Single Line Diagrams, Schematic Diagrams, Cable Schedules, Interconnection drawings, loop drawings, Instrument data sheets etc.</li><li>Prepare technical inquiry requests to vendors, participate in the technical evaluation of vendor bid offers.</li><li>Review vendor drawings and documents and review design calculation. Ensure vendor equipment specifications meet the design specifications and are within budgeted costs.</li><li>Reviews equipment specs/designs to ensure equipment can meet reliability objectives.</li><li>Participate as a technical adviser on capital projects and turnarounds.</li><li>Participates in the MOCs and PSSRs of new installations to assure adherence to functional specifications.</li><li>Act as subject matter expert (SME) in performing root cause analysis (RCA) investigations and provides expertise to the RCA teams as required.</li><li>Review and optimize ITPMs for functionally critical l&amp;E equipment (MICE).</li><li>Drive consistency in l&amp;E equipment design across the site as part of projects review including consistency in maintenance strategies.</li><li>Provide communication to area resources about improvement projects.</li><li>Provide input as needed on projects to ensure design and reliability issues are considered and addressed on new projects.</li><li>Provide guidelines to Maintenance in order to ensure that Life Cycle Asset Management processes are complied with throughout the entire life cycle of new and old assets.</li><li>Champion continuous improvement fosters relationships between various plant functions to focus on total quality.</li></ul>&nbsp;Policies, Systems, Processes and Procedures <ul><li>Contribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes and practices taking into account ‘international leading practices in order to improve productivity and operational efficiency.</li><li>Provide critical input to support the development of l&amp;E Reliability Section’s systems, policies, processes, and procedures in order to meet business requirements.</li><li>Ensure team members comply with all l&amp;E Reliability Section’s policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner.</li></ul>&nbsp;Reporting <ul><li>Prepare relevant reports in a timely and accurate manner in order to meet the departmental</li><li>Prepare relevant reports in a timely and accurate manner in order to meet the departmental requirements, policies and standards.</li><li>Support supervisor in the preparation of the annual operating and capital budgets. Ensures reliability projects and activities are completed on time and within budget.</li><li>Communicate ideas, present, and explain technical knowledge to stakeholders.</li><li>Communicate to Supervisor to inform on issues that require additional follow up.</li><li>Report incidents and near misses and participate in investigations as required.</li></ul>&nbsp;Quality, Health, Security, Safety and Environment <ul><li>Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high quality products/ services.</li></ul>&nbsp;Requirements: Experience <ul><li>Required (Years2 / Job Level3 / Industry): Total of 7-10 years of experience in the fields of Electrical equipment &amp; systems maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position.</li></ul>&nbsp;Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals IndustryOther Job Specific Requirements and/or Vocational Accreditations<ul><li>Well conversant with protection and control systems of a large process plant involving High and Medium Voltages (132/33/6KV).</li><li>Solid understanding of the concepts of electrical protection system design and intelligent protection relays operation.</li><li>Experience in failure mode &amp; effect analysis and good understanding of failure mechanisms of Electrical equipment.</li><li>Troubleshooting techniques and ability to analyze and resolve engineering problems independently.</li><li>Knowledge of relevant IEC and IEEE Standards and or other well recognized standards.</li><li>Familiarity with ETAP and similar system modeling and analyzing tools would be an additional advantage.</li><li>Relevant experience in having performed load flow &amp; short circuit studies, Relay discrimination and coordination studies for an industrial electrical distribution system.</li><li>Familiarity with CMMS preferably SAP.</li><li>Sound understanding of industrial PLC and Packaged control systems.</li></ul>&nbsp;Education Required (Qualification1 / Discipline): <ul><li>﻿Bachelor’s degree in electrical/ Electronics/Instrumentation Engineering.</li></ul>&nbsp;Experience Required (Years2 / Job Level3 / Industry): <ul><li>Total of 7-10 years of experience in the field of Instrumentation &amp;</li><li>Controls maintenance and technical support preferably in a process industry, out of which 5-7 years at a similar position. Experience in Petrochemicals Industry.</li></ul>&nbsp;Other Job Specific Requirements and/or Vocational Accreditations <ul><li>Knowledge of automation/control systems, including: DCS, PLC, Safety Instrumented Systems, function block and ladder logic programming, industrial instrumentation, electrical equipment and process analytical systems.</li><li>Experience with design and maintenance of Plant Instrumentation, Control Valves, and Safety Instrumented Systems and process safety management programs.</li><li>Functional Safety Certification as Functional Safety Engineer (FS Eng.) preferred.</li><li>Hands on experience on the use of ExSILentia software preferred.</li><li>Working Knowledge on International Standards related to Instrumentation and Controls design and maintenance such as IEC, ISA, FCI etc. as well as Functional Safety standards IEC61511/ISA 84.</li><li>Experience in failure mode &amp; effect analysis and good understanding of failure mechanisms of instruments employed in a process industry.</li><li>Troubleshooting techniques and ability to analyse and resolve engineering problems independently.</li></ul>&nbsp;

Responsibilities You will be required to perform the following: <ul><li>Conduct performance and compliance assessments for gas plants control systems and instrumentation and generate related reports.</li><li>Participate in field investigation and troubleshooting activities when needed and provide recommendation to restore control systems.</li><li>Conduct technical evaluations of control systems and instrumentation purchases.</li><li>Perform engineering studies.</li></ul> Requirements: <ul><li>As successful candidate you must have a Bachelors degree in Electrical/Computer Engineering with minimum of (15) years of experience as field technical support, in the Oil/Gas industry.</li><li>The candidate is expected to have hands-on experience and in-depth knowledge of Distributed Control Systems (DCS), Emergency Control Systems (ESD), field sensors and measurement devices, control valves, safety valves, and process analyzers. It is also expected to have minimum knowledge of cybersecurity requirements for control systems and network.</li><li>The candidate is expected to have knowledge of drawings and international standards related to control systems, instrumentation, and electrical systems.</li></ul>

Responsibilities: <ul><li>Provide control system and instrumentation related technical support in Process control system activities, troubleshooting and recommend corrective actions to ensure having safely and reliably operate the facilities.</li><li>Design, commission, test, configure, enhance and resolve Process control and instrumentation activities.</li><li>Ensure security compliance of Process control and instrumentation activities. Additionally, analyzing relevant process data various control system for any process upsets investigation.</li><li>Participate in any initiatives and studies includes but not limited to HAZOP, SIL Study, RCA analysis, innovation programs, operation excellence, knowledge sharing, self-development and others programs as required.</li><li>Work with various vendors as needed to install, upgrade, update or implement new technologies for plant control and automation systems and instrumentation.</li><li>Develop function and design specification for control system and instrumentation</li><li>Review and validate vendors design documentations at all stage of assigned projects.</li></ul> Requirements: <ul><li>As a successful candidate you should have a BS in related engineering discipline to control system and instrumentation in relevant gas processing operation facilities in Oil/Gas Industry with (15) years of experience.&nbsp;</li><li>You should have a recent experience with DCS and ESD (Yokogawa Centum VP / ProSafe-RS), Bentley Nevada VMS, compressor Controller (CCS), Turbine Control System (TCS) and control system security.atio</li><li class="ql-align-justify">You should have excellent experience and knowledge in designing and updating/upgrading control system and strong knowledge of relevant codes and standards.</li></ul>

Responsibilities: <ul><li>Develop refinery and petrochemical unit’s control logic, philosophy, cause and effect&nbsp;</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Review and update refinery and petrochemical redline drawings&nbsp;</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction)</li><li>Researching new technologies, regulations, and other factors that may affect business model</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;&nbsp;</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines.&nbsp;</li><li>Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented.&nbsp;</li><li>Develop, install, calibrate, service, and troubleshoot a wide variety of electronic and pneumatic instrumentation</li><li>Read and interpret blueprints, schematics, and technical manuals</li><li>Perform complex mathematical calculations to determine the correct size and type of instrument required for each application</li><li>Select and specify the most appropriate instruments and components for each installation</li><li>Install, program, maintain, and repair control systems and associated equipment</li><li>Perform Factory Acceptance Tests (FAT), Site Acceptance Test (SAT), Performance Acceptance Test (PAT), control wiring design, and logic design</li><li>Prepare and review all instrumentation engineering deliverables such as design basis, specification, data sheets, instrument index, I/O schedule, logic diagram, cable / JB schedule, Instrument Datasheets and sparing strategy&nbsp;</li><li>Review and comment on project design documents for pressure, flow, temperature, level and analytical field analyzer, in addition to control valves, MOVs, AOVs, and EIVs.</li><li>Develop and update instrument loops diagrams, as well as PFDs, PIDs, ISDs, ILDs, and Data Sheets.</li><li>Lead the instrumentation design, installation, and commissioning of the wiring, cabling, and grounding systems for instrumentation following Company and international standards.</li><li>Develop and update MAC agreement, DCS, ESD, 3rd party system VMS and CCS</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning&nbsp;and commissioning including instrument loop check philosophy&nbsp;</li><li>Participation in all project studies such as HAZOP, SIL Study</li><li>Review and understanding of communication protocols like Modbus, FieldBus, TCP and General Process Automation Protocols</li></ul> Requirements: <ul><li>Bachelor’s degree in engineering preferred instrument or electric engineering.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals instrument engineering.</li></ul>

Responsibilities: <ul><li>Supervise the activities and work performed by direct reports to ensure that are carried out in an efficient and effective manner, in line with the annual business plans, and departmental policies and procedures.</li><li>Recommend training and development interventions for team members to build their capabilities.</li><li>Contribute to the development of Qatari employees. </li><li>This accountability is applicable to expatriate employees only.</li><li>Monitor performance, identify upgrade needs, collect, analyze, and interpret performance data to ensure optimal control systems performance.</li><li>Monitor and participate in control system installation, modification, and upgrades to ensure effective implementation.</li><li>Work closely with Procurement team in the identification of upgrade requirements, technical qualification of vendors and final selection to ensure that services provided meet Q-Chem needs and standards.</li><li>Modify the control systems throughout the plants, by installing all parameters, carrying out procedures as per set guidelines and practices to ensure smooth operations.</li><li>Prepare spare parts management requirements at all times and monitor inventory, especially prior to major planned overhauls to avoid and minimize control system disruptions.</li><li>Plan and schedule the upgradation of DCS &amp; SIS equipment and systems and ensure alignment of all relevant stakeholders to maintain DCS &amp; SIS systems reliability and optimal operation.</li><li>Participate in developing of process and instrumentation diagrams to support clear and effective operation of control systems.</li><li>Prepare DCS &amp; SIS system specifications to ensure accurate standardization of material.</li><li>Prepare cost estimates for respective projects, review and approve documentation developed by contractors to ensure effective selection of contractors that would meet Q-Chem needs within allocated budgets.</li><li>Work closely with ICS cybersecurity team to ensure all DCS &amp; SIS assets are secured.</li><li>Participating of keeping DCS &amp; SIS assets working within the target security level.</li></ul> Policies, Systems, Processes &amp; Procedures <ul><li>Contribute to the identification of opportunities for the continuous improvement of departmental systems, policies, processes, and practices considering ‘international leading practices’ to improve productivity and operational efficiency.</li><li>Provide critical input to support the development of Section’s systems, policies, processes, and procedures to meet business requirements.</li><li>Ensure team members comply with all Section’s policies, processes, standard operating procedures, and instructions so that work is carried out in a controlled and consistent manner.</li></ul> Quality, Health, Security, Safety and Environment <ul><li>Ensure compliance with regulatory requirements and relevant quality, health, safety, security and environmental procedures and controls across the Department to guarantee employee safety and delivery of high-quality products/services.</li></ul> Requirements: <ul><li>Required (Qualification1 / Discipline): Bachelor’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Instrumentation Engineering, Engineering Technology, Physical Engineering.</li><li>Preferred (Qualification1 / Discipline): Master’s degree in Electrical Engineering, Electronic Engineering, Process Control Engineering, Software systems Engineering, or any related discipline.</li></ul> Experience: <ul><li>Required (Years2 / Job Level3 / Industry): 5 – 7 years of experience in control system function preferably in O&amp;G Industry.</li><li>Preferred (Years2 / Job Level3 / Industry): Experience in Petrochemicals Industry or DCS/SIS systems OEM experiences.&nbsp;</li><li>2-3 years at a similar position as Emerson control system engineer for our client II, Honeywell control system engineer for our client or Yokogawa control system engineer for RLOC and Triconex safety systems.</li></ul> Preferred:&nbsp; <ul><li>Functional Safety Engineer..</li><li>ISA Certified Automation Professional® (CAP®) Certification.</li><li>ICS Cybersecurity Fundamentals.&nbsp;</li></ul>

Responsibilities: <ul><li>Design &amp; Development of Electrical Drawings –SLD’s, wiring diagrams, cable routing layouts, lighting &amp; earthing layouts etc. based on Scope &amp; inputs provided.</li><li>Design &amp; development of I/O list, instrument loop diagrams, instrument location layouts, JB connection diagrams &amp; PLC enclosure layouts etc.</li><li>Collaborate with inter disciplines to get the required inputs to update the drawings.</li><li>Ensure quality of the drawings as per Standards.</li></ul> Requirements: <ul><li>Candidate with 4-6 years’ experience in electrical design &amp; detail engineering in Oil &amp; gas/Chemical/refinery industry.</li><li>Expertise in AutoCAD/MicroStation tool&nbsp;</li><li>Hands on experience in designing the electrical and instrumentation drawings like single line diagrams, schematic diagrams, GA’s, Panel drawings, cable routing drawings, loop diagrams &amp; connection diagrams etc.&nbsp;</li><li>Familiar with electrical design calculations (Cable&amp; conduit sizing, Transformer sizing, lighting calculations, earthing etc.)&nbsp;</li><li>Able to manage multiple projects at the same time.</li><li>Good at communication skills.</li><li>Ability to work collaboratively in a team environment</li></ul>

Skills

Industry

Location

Jobtitle

401 automation electrical instrumentation lead Jobs found

Instrument Engineering (FGP)

Instrumentation Lead

Metering Engineer

Corrosion Engineer

Instrument & Electrical Reliability Engineer

Instrument Engineering

ASC - Control System DCS

Instrumentation Engineer

Control System Engineer

Electrical Design Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

401 automation electrical instrumentation lead Jobs found

Instrument Engineering (FGP)

Instrumentation Lead

Metering Engineer

Corrosion Engineer

Instrument & Electrical Reliability Engineer

Instrument Engineering

ASC - Control System DCS

Instrumentation Engineer

Control System Engineer

Electrical Design Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.