EHS Manager

Facilities & Utilities Manager

Chemical Engineer – Relief Systems Process Safety

QC Chemist I

Responsibilities: <ul><li>Lead all EHS&amp;S initiatives at the Medway site.</li><li>Build and maintain a strong safety culture across departments.</li><li>Ensure compliance with federal, state, and local regulations including OSHA, EPA (CAA, CWA, RCRA, TSCA, SARA), and internal our client standard.</li><li>Develop and implement EHS programs, training, and internal audits.</li><li>Manage environmental permits, licenses, and waste disposal practices.</li><li>Coordinate emergency preparedness and hazardous material controls.</li><li>Lead incident investigations and root cause analysis.</li><li>Maintain ISO 14001 certification and drive continuous improvement.</li><li>Prepare EHS reports and metrics for internal and external stakeholders.</li><li>Represent the site during audits by customers and regulatory agencies.</li><li>Oversee EHS budget and manage third-party consultants or vendors as needed.</li></ul> Requirements: Qualifications &amp; Experience&nbsp; <ul><li>Bachelor’s degree in Environmental, Health &amp; Safety or related field (required).</li><li>7+ years of EHS experience in a manufacturing environment.</li><li>Experience in medical devices or other highly regulated industries preferred.</li><li>CSP (Certified Safety Professional) certification preferred.</li><li>Experience with ISO 14001 implementation.</li><li>In-depth knowledge of hazardous waste, air/water compliance, chemical management, and emergency response protocols.</li></ul>

Responsibilities: <ul><li>Lead KWS RM COE and own equipment criticality element as part of the facilities and utilities operation.</li><li>Lead Facilities &amp; Utilities team insourcing maintenance strategy with a strong technical development plan</li><li>Delivery highest level of facilities and utilities machine reliability with the optimum level of preventive, corrective &amp; condition-based base maintenance strategic formulation and implementation.</li><li>Lead and implement integrated facilities management for factory-wide facilities management/maintenance. This includes the hard and soft service of the facilities management.&nbsp;</li><li>Key member and element owner of Technical COE on FUS and drive all global FUS programs.</li><li>Key member of NRC COE to drive sustainability agenda through out the factory.</li><li>Develop good relationships with other regional factories and strive for cross-learning and implementation of best practices for plant performance and KWS.</li><li>Owns engineering facilities and utilities R&amp;M cost budgeting and end-to-end management and monitoring.&nbsp;</li><li>Conducts effective cost reduction initiatives in line with ZLA &amp; KIMMS projects.&nbsp;&nbsp;</li><li>Leads ongoing cross-functional teams to conduct analyses of plant savings opportunities, identify CAPEX investment opportunities, and make strategic investments to support growth and machine reliability.</li><li>Provide coaching, and guidance &amp; lead the team towards a high-performing team.</li><li>Leads the team as the expert point of contact for facilities and utilities for the whole plant and provides support accordingly.</li><li>Owns Technician Training and development systems in support of Technician Progression</li><li>Responsible for Site Daily Meeting Cadence with Tier 1-4 meetings and ensure they are healthy for results sustainability.</li><li>To guard standards and regulations on EHS, QFS, and other fundamentals by participating in and coaching during Leader Led Observations, Safety 7, Golden 6, and other EHS and QFS activities.&nbsp;</li><li>Always maintain a good level of documentation and evidence management to support all internal and external audits. (QFS, KWS, EHS, DOSH, FSSC, HACCP, HALAL, and Global programs on FUS)</li></ul> Requirements: <ul><li>Degree in Chemical/Mechanical/Electrical Engineering or related discipline with at least 10 years of working experience.</li><li>Sound practical knowledge of mechanical engineering (rotating equipment, fasteners, bearings, gearbox, valves, thermodynamics, material strength &amp; compatibility, etc.)</li><li>Sound technical knowledge of utilities &amp; facilities equipment working mechanism and working principle (compressed air, WWTP, HVAC, chiller, coiler, hoist, rapid door, building maintenance (roof, drain, floor, etc.), electrical power supply, water supply, gas supply, nitrogen gas supply, etc.)</li><li>Preferably having work experience in F&amp;B industries with experience in SAP system</li><li>Technical experience in the following systems:&nbsp;</li><li>Six Sigma DMAIC process and strong analytical knowledge to lead and resolve complex issues.</li><li>Strong knowledge and awareness of different types of leadership and hands-on experience.&nbsp;</li><li>Capable of formulating different types of strategies to increase reliability, effectiveness, and collaboration of facilities and utilities teams to drive results in a sustainable way</li><li>Numerical literacy of basic electrical engineering (motor power, electrical load, cable sizing) and process engineering (basic mathematics related to the physics of pressure, temperature, level, force, etc.)</li><li>Sound hands-on experience in facilities &amp; utilities maintenance strategy formulation and conducting insourcing maintenance.&nbsp;</li><li>Exposed and have hands-on experience with pillar approached performance management (KWS), CI tools, analysis tools, sound problem-solving skills, and coaching skills.</li><li>Six Sigma Green Belt project implementation experience &amp; CAPEX project management will be an added advantage</li></ul>

Responsibilities:Evaluate, design and document vessels for potential over pressure and vacuum scenarios (new & existing) – relief device (PSV, RD, conservation vents) relief load calculation, inlet and outlet line sizing, size selection and datasheet preparation, and relief/flare load summary preparation. Design, model, document, and communicate requirements for pressure/vacuum relief devices and effluent handling.Understanding of mechanical design conditions and to utilize the process safety information in designing relief system to safeguard piping and equipment.Understanding of HAZOP, PHA report, SIL studies - provide relief system input from these reports. Design of overpressure protection for gas/vapor filled systems using Depressurization concept. Material & Energy Balance Calculation as per the process requirement to design the adequate relief systems.Work to enhance safety and protection of the environment through overall relief project development.Stay abreast of corporate and industry relief practices and standards such as API 520/521, NFPA 30, API 2000 etcRequirements:3 to 8 years of direct Relief Systems experience in process design, commissioning, start-up, or operations.Demonstrated project management skills. Proficiency with Microsoft Office programsPrefer knowledge in application and compliance requirements of regulatory codes: US Occupational Health and Safety Administration, Internal Process Safety StandardsExperience in a petrochemical plant or refinery Experience with the following software would be an advantage: SuperChems, ASPEN, HTRI, AFT ARROW, AFT Fathom.Addition Required Qualifications/Job Requirements:Master’s or bachelor’s degree in chemical engineering from accredited university or college.Understand process flow diagrams, piping and instrumentation diagram and equipment layouts, conceptual equipment layouts, process layout, utility layout and other block layouts.Understand Plant process design with equipment sizing & utility load design calculation. Must have strong interpersonal, communication, collaboration, and consultation skills. This position will interact with personnel in all organizations.Ability to organize, prioritize, and execute a heavy workload simultaneously within budget and schedule.Must have the ability to communicate effectively through verbal and written means, and able to adapt communication to best reach the intended audience within or outside the organization.Strong customer focus, with demonstrated ability to solve complex issues and work in partnership with peers, Manufacturing, and other stakeholders.Ability to compile and analyze complex data.Knowledge in application of industry standards, recommended practices, and codes (API, NFPA, ASME, etc.)Ensure regulatory compliance of process changes- Provide and communicate clear, concise, and timely reporting of project progress and accomplishments verbally and in writing. 

Responsibilities:The Chemist I, under direct supervision, learns and performs QC laboratory chemical analyses of raw materials, in-process materials, stability and finished products, and testing to support process validation.May participate in investigations.Learns and stays current with regulatory guidances and compendia relevant to laboratories and pharmaceutical manufacturing.Conducts routine laboratory analyses: finished product testing, stability testing, raw material testing, cleaning verification testing and manufacturing in-process testing.Typical activities may include buffer/solution preparation, standard preparation and operating analytical instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc. Uses laboratory software for analyses.Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeepingCleans lab working surfaces and disposes of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.Under close supervision, learns to troubleshoot basic instrument problems.With guidance, participates in OOS/OOT/NOE and other investigations.Elevates questionable sample results, OOS, and aberrant results immediately to Supervisor.May assist in drafting, editing, and reviewing SOPs and laboratory investigations.Maintains assigned training records current and in-compliance.May assist in the training of less senior laboratory staff.Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting.Document accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.Follows internal processes related to controlled substances continuous.Follows EH&S procedures to ensure a safe work environment.Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS continuous.Requirements:Minimal acceptable level of education, work experience and certifications required for the job.Bachelor of Science Degree in chemistry, chemical engineering or related field with analytical chemistry coursework required. Some pharmaceutical laboratory experience preferred.Proficiency in a body of information required for the job.e.g. knowledge of FDA regulations, GMP/GLP/GCP, Lean Manufacturing, Six-Sigma, etc.Proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc. Basic knowledge of wet chemistry techniques.Knowledge of applicable safety and standards guidelines: SOP, cGMP, GLP, DEA regulations and/or MSDS.Competency in Microsoft Office Suite.Often referred to as “competencies”, leadership attributes, skills, abilities or behaviors that may be enterprise, functional or job specific e.g. coaching, negotiation, calibration, technical writing etc.Ability to display and analyze data in a logical manner.Good verbal and written communication skills as well as good computer skills.Attention to details and accurate record keeping.Establish and maintain cooperative working relationships with othersSolid organizational skills.Ability to take initiative, set priorities and follow through on assignments.Physical & mental requirements e.g., lift 40 pounds, walk across plant/warehouse, business travel (% of time), driving as part of work responsibilities, etc.Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel. Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicalsMust occasionally lift and/or move up to 15-25 lbs.Ability to wear personal protective equipment, including respirators, gloves, etc. Specific visions abilities are required by this job include close vision and color vision.Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods.

Skills

Industry

Location

Jobtitle

4 chemical absorption Jobs found

EHS Manager

Facilities & Utilities Manager

Chemical Engineer – Relief Systems Process Safety

QC Chemist I

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

4 chemical absorption Jobs found

EHS Manager

Facilities & Utilities Manager

Chemical Engineer – Relief Systems Process Safety

QC Chemist I

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.