Chemical Engineering (HDGP)

Sr APC Engineer

Technical Safety (Process Safety)

Business Development Specialist

Process Engineer

ASC - Technical Safety (Process Safety)

Process Engineer - MPEU

Process Engineer - Utilities

Chemical Engineer

Responsibilities You will be required to perform the following: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities</li><li>Develop, review and/or validate plant mass balances</li><li>Check plant performance to ensure it is running up to its design</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test</li><li>Evaluate the catalyst recovery performance</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation</li><li>Lead process and equipment optimization studies</li><li>Lead feasibility studies</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs</li><li>Develop implementation plan for critical recommendations</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies</li><li>Lead Energy Optimization / Conservation studies</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies</li><li>perform management of change (MOC)</li><li>verify system operations and performance after implementing the recommendations</li></ul> Requirements&nbsp; <ul><li class="ql-align-justify">As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following: Streamline APC objectives with corporate objectives and develop programs, best practices, and monitor KPIs to improve APC and economic performance.</li><li>Analyze data from various sources, such as process variables, instrumentation, and control systems, to identify opportunities for improvement. Develop inferential (linear and non-linear) to improve refinery operations, efficiency and reduce costs.&nbsp;</li><li>Implement APC strategies, perform feasibility studies and establish new business cases to optimize refinery operations and maximize the yield of desired products. Conduct pilots and evaluate new APC technologies such as Real-Time optimization, Machine Learning, and AI to contribute to yield improvement.&nbsp;</li><li>Analyze chronicle problems and debottleneck complex APC to improve process operations and economic benefits.&nbsp;</li><li>Provide subject matter expertise to operating facilities Operations, Maintenance, and Engineering teams by consulting, provide awareness sessions, and participating and leading technical exchanges and conferences.&nbsp;</li><li>Lead technical sessions such as the design review, model review, and commissioning.&nbsp;</li><li>Perform periodic assessments and evaluations to assess the performance and effectiveness of real-time optimization solutions.&nbsp;</li><li>Work closely with the optimization team (Real Time optimization engineers, Simulation engineers and automation engineers and ensure optimization requirements are met.&nbsp;Lead pre-and post-performance baseline evaluation for APC technologies.&nbsp;</li><li>Monitor economic benefit Key performance indicators and provide recommendations. Review standards and General Instructions on behalf of the GME departments and act as leading SME.</li></ul> Requirements: <ul><li>You must hold a bachelors degree in Chemical Engineering, Industrial Engineering, or a related field.&nbsp;</li><li>You should have a minimum of 10 years’ experience in APC. You should be able to demonstrate expertise in APC, control systems, and OPC communication.&nbsp;</li><li>A comprehensive understanding of refinery economics, mass and energy balances is essential.&nbsp;</li><li>Familiarity with international standards and specifications for advanced process control.&nbsp;</li><li>Exceptional analytical and troubleshooting skills in the field of advanced process control. Strong leadership skills to effectively manage technical discussions and guide technical teams. Working knowledge of oil/gas-related plant processes.</li></ul>

Role Description: <ul><li>We are seeking a Technical Safety (Process Safety) Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib. Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Technical Safety Engineer is to work with key stakeholder organizations to provide technical guidance on facility design requirements pertaining to fire prevention and process safety engineering areas, including but not limited to firewater systems, fireproofing, emergency shutdown systems, drainage systems, tank designs, electrical classifications, pipeline design factors, equipment access and layout, spacing, risk areas.</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Provide technical guidance and develop procedures for all company organizations on fire prevention and process safety engineering in facilities design and related operational requirements, including company and international standards (e.g., NFPA, API).</li><li>Review all new projects to ensure conformance to company and international engineering standards; represent LP at project proposal meetings, and provide continuing guidance through design, construction, and commissioning.</li><li>Provide company-wide technical guidance and assistance during design-related surveys of facilities for adequacy of design, operations and maintenance.</li><li>Analyze fires and process safety incidents both in the industry and to determine causes and whether company standards or other requirements require update or changes, or whether other remedial measures should be considered.</li><li>Initiate and participate in studies to resolve specific problems outside currently available technology.</li><li>Develop training programs in the field of process safety and fire prevention engineering and provide training assistance as required.</li><li>Use risk analysis techniques to identify corporate risk exposure and develop cost-effective solutions.</li><li>Assist in surveys of operations by insurance, Government, and other outside agencies, and act as the Company expert on fire prevention engineering standard requirements.</li><li>Mentor other LP personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in chemical engineering or fire protection engineering, and ten years of relevant industry experience in the oil and gas, petrochemicals, or related industries, five of which focused on addressing technical safety and fire prevention engineering issues.</li><li>Professional Engineering licensing/certification/registration in Fire Protection Engineering, or an advanced degree is highly desirable.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities: <ul><li>Provide technical input to LP and economic modeling.</li><li>Develop chemical process yields, qualities, and balances for process configurations in the refining and chemical units.</li><li>Strong experience in chemical derivative process licensor selection and technology analysis as</li><li>Provide insights and recommendations in the financial model output and the ability to guide management to select the best configurations for LTC project&nbsp; cases.</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, pre-feed, feed&nbsp;</li><li>Basic design, detailed engineering, and construction).</li><li>Analyzing the market and identifying opportunities for business growth</li><li>Conducting research on competitors to identify opportunities for new products or services.</li><li>Developing effective strategies to increase brand awareness in target markets.</li><li>Researching new technologies, regulations, and other factors that may affect business models.</li><li>Developing effective project execution strategies, plans, and teams Classification: Company General Use.</li><li>Establishing new client relationships and maintaining existing ones to generate revenue.</li><li>Deliver the tools, templates, and systems to ensure the safe, passionate, and flawless delivery of the project.</li><li>Ensure stage deliverables are developed to support estimating.</li><li>liaison between project management and technical disciplines to achieve integration across all project disciplines.</li><li>Ensure that the contractor has the appropriate tools and systems for executing the project.</li><li>Ensure scope, risk, and interfaces are captured; manage interfaces between internal and external parties and document them.</li><li>Manage scope development and its impact on cost and schedule.</li></ul> Requirements: <ul><li>Bachelor’s degree in engineering preferred chemical engineering.</li><li>At least 15 years of experience with a focus in the Refining &amp; petrochemicals business.</li><li>At least 2 years’ experience in the Linear Programming (LP) &amp; Economics Modeling.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance areas, to troubleshoot and fix process equipment.</li><li>Develop the engineering designs packages for the new installation and upgrade projects.</li><li>Review project proposals and detailed design packages for new facilities.</li><li>Participate in the testing and commissioning of the new facilities, and turnaround and inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solutions for energy savings.</li><li>Ensure quality, cost-effective, and timely solutions to any upgrade.</li><li>Ensure full HSE Compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Contribute to the business unit strategy.</li><li>Assist in the training, development, and mentoring of younger staff.</li><li>Provide analysis, evaluation, and interpretation in support of projects, processes, and financing related to capital investment decisions.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>At least 15 years of experience in the industrial operation facility, a gas plant facility is preferred.</li><li>Good knowledge of the modular skids mounted process unit.</li><li>Able to demonstrate a detailed knowledge of industry standards and procedures, such as API and ASMI codes, required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs, toubleshooting process equipment and system failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software is required.</li><li>Knowledge in creating schematics and piping diagrams.</li><li>Ability to conduct failure analysis, and provide recommendations for failed process systems, and sequence of event reporting.</li><li>Knowledge with process equipment and systems field installation, commissioning, and testing, as well as experience in specifying piping and equipment layout.</li><li>Experience in dealing with corrosion related issues, with thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities.</li><li>Ability to work with multidisciplinary teams producing reports, studies, and presentations that are pivotal in shaping management’s decisions.</li><li>Ability to communicate effectively with management at all levels within the organization, and be capable of spotting and reconciling conflicting views and interests among different parts of the organization.</li><li>Strong written and oral communication skills, and be ability to communicate complex technical, economic, and commercial concepts</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following:&nbsp; <ul><li>Review and monitor the performances of existing MEROX manufacturing facilities through key performance indicators (KPIs) representing the process plant’s optimum operability, profitability, reliability, energy efficiency and process safety etc.</li><li>Issue quarterly MEROX process unit performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.</li><li>Perform in-depth plant monitoring and optimize performance of MEROX units by overseeing unit’s operation and economics losses.</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process.</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of MEROX plants which may include but not limited to process troubleshooting, start-up and shutdown activities, capacity test runs, technology pilot testing, and process design improvements.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>Conduct internal assessments on MEROX process engineering standard using our client engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our client Central Engineering</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned process units and support techno-economic evaluations.</li><li>Maintain relevant knowledge of technology developments in the MEROX process.</li><li>Perform evaluation and approval of technology developments to Central Engineering and facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with MEROX process technology licensors and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by MEROX unit operating facilities.</li><li>Participate in incident investigation activities concerning MEROX process units as required by operating facilities.</li><li>Lead unit operations troubleshooting and investigating off-spec. products and plant trips/ upsets and manage the required deliverables.</li><li>Support Operations during turnaround and unplanned Shutdowns / Startups by understanding the unit operating conditions and transient effects to recommend operations improvements</li><li>Manage long and short-term projects by proposing major projects to improve safety, reliability and profitability. Prepare design requests, budget justifications and detailed implementation plans for economically justifiable projects.</li><li>Develop engineering design packages for in-house process-oriented projects and follow up on implementation.</li><li>Liaise with vendors and technology licensors for process enhancements and changes as well as with Engineering Services Department for any technology assessment and piloting support.</li><li>Perform benchmarking and best practices technical exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates) having MEROX process units.&nbsp;</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>An advanced degree is preferred.</li><li>You should have a minimum of 15 years’ experience within a refinery or petrochemical process unit (process engineering and operations) with at least 10 years’ experience in handling MEROX plants.</li><li>Exposure to different MEROX process licensor technologies is preferred.</li><li>You should be able to demonstrate strong mentorship skills with the ability and drive to guide the development of junior engineers that you will interact with.</li><li>Familiarity and understanding of the best practices, design principles, international engineering standards and specifications relevant to operation of the concerned process units.</li></ul>

Responsibilities: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs.</li><li>Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using our partners engineering standard references.</li><li>Highlight any deviations or better standards applied by affiliates for endorsement to facility management or our partners Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul> Working environment: <ul><li>Our Partners high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.</li><li>At our partner, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.</li><li>Our partner has a proud history of educating and training their workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.</li></ul> Other Information: <ul><li>Our partner occupies a unique position in the global energy industry.&nbsp;</li><li>They are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.&nbsp;</li><li>With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.</li><li>Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources.</li><li>This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.</li></ul> Organization Overview:&nbsp; <ul><li>We are seeking a Downstream Process Engineer with experience in Utilities processes (GTGs, STGs, Desalinating water unit, Raw water unit, Power generation, Boilers, Cooling water, Demineralized Water, Boiler feedwater, Waste water treatment facilities and recovery, Nitrogen generation &amp; storage, flares, etc) to join our Global Manufacturing Excellence organization under the Downstream Global Manufacturing Support Department (GMSD).</li><li>GMSD’s technical team is a multi-disciplinary team provides the required high-quality technical support to GM operating facilities (Refineries, NGLF, and petrochemical plants) inside the Kingdom of Saudi Arabia &amp; across the globe.</li><li>Your primary role will be to provide process engineering and operations expertise to monitor, optimize, and drive performance improvement programs for Utilities, including remote and field technical advisory support and benchmarking of utilities. You will drive the performance improvement programs which enhance process safety, optimize manufacturing cost, and increase utilities reliability.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Review and monitor the performances of existing Utilities through key performance indicators (KPIs) representing the optimum operability, profitability, reliability, and process safety.&nbsp;</li><li>Issue quarterly utilities performance benchmarking reports highlighting the KPIs, analysis, and performance improvement recommendations.</li><li>Monitor and support the facilities in implementing the recommendations and closing the gaps identified in the quarterly performance benchmarking reports.&nbsp;</li><li>Conduct benchmarking and best practices exchange workshops internally among Global Manufacturing facilities (wholly-owned and affiliates).</li><li>Provide on-demand remote and/or field technical advisory support to Global Manufacturing facilities on matters concerning the operation of Utilities which may include but not limited to process design, process troubleshooting, start-up and shutdown activities and capacity test runs. Issue service report for every support activity provided highlighting the facilities need, actions taken, results, and lessons learned.</li><li>In collaboration with Global Manufacturing facilities engineers, propose cost optimization or process improvement initiatives focusing on ‘low-hanging fruits’ with no or minimal capital investment required, through operational adjustment or design modification.</li><li>Conduct internal assessments on Utilities using engineering standard references. Highlight any deviations or better standards applied by affiliates for endorsement to facility management or Central Engineering.&nbsp;</li><li>Act as the overall coordinator for cascading and driving Global Manufacturing and Corporate programs for the Utilities in the operating facilities enabling their execution and effective monitoring.&nbsp;</li><li>Participate in Business Plan development and coordinate with stakeholders for any capital investments on assigned Utilities and support techno-economic evaluations.</li><li>Be aware of Utilities technology developments in the industry and endorse the evaluation and approval to Central Engineering to facilitate field deployment.</li><li>Support arrangement and facilitation of technical knowledge exchange workshops with major equipment suppliers for Utilities and Global Manufacturing facilities.</li><li>Participate in hazard operability (HAZOP) and safety integrity level (SIL) studies as required by Utility operating facilities.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in Chemical Engineering or related specialization.&nbsp;</li><li>You should have a minimum of 15 years total Utilities unit experience (process engineering and operations) with at least 10 years’ experience in handling utilities.</li><li>Exposure to major equipment suppliers / package units for Utilities is preferred.</li></ul>

Responsibilities: <ul><li>Perform process troubleshooting and address chronic operational problems</li><li>Conduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutions</li><li>Provide technical guidance and field support for process related issues in the plant</li><li>Lead investigations and HAZOP’s</li><li>Carry out detailed design reviews of plant modifications and support the implementation of projects</li><li>Develop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiency</li><li>Mentor and develop young engineers.</li><li>Maintain the highest standards of integrity, engineering ethics and professional conduct.</li></ul> Requirements: <ul><li>Hold at least a BS degree in chemical engineering from a recognized university.</li><li>Minimum of 10 years’ industry experience preferably at operating facilities</li><li>Be able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performance</li><li>Have significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning &amp; startup)</li><li>Have experience in process safety management systems &amp; tools such as HAZOPs and MOC’s</li><li>Possess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)</li><li>Professional Engineering, Chartered Engineer or equivalent certification is desirable.</li><li>Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.</li><li>Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements</li><li>Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.</li></ul>

Skills

Industry

Location

Jobtitle

434 chemical engineering Jobs found

Chemical Engineering (HDGP)

Sr APC Engineer

Technical Safety (Process Safety)

Business Development Specialist

Process Engineer

ASC - Technical Safety (Process Safety)

Process Engineer - MPEU

Process Engineer - Utilities

Process Engineer - Utilities

Chemical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

434 chemical engineering Jobs found

Chemical Engineering (HDGP)

Sr APC Engineer

Technical Safety (Process Safety)

Business Development Specialist

Process Engineer

ASC - Technical Safety (Process Safety)

Process Engineer - MPEU

Process Engineer - Utilities

Process Engineer - Utilities

Chemical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.