Manufacturing Engineer(Molding)

End-User Computing (EUC) Lead

Salesforce Administrator

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer 

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Logistics Analyst

Staff Manufacturing & Process Development Engineer – Molding

Supply Chain Continuous Improvement Leader

Responsibilities: <ul><li>Participate in oversea transfer program and ensure molding machines, mold tooling’s and processes are installed and qualified promptly for production.</li><li>Initiate tooling, process and quality improvements to improve productivity.</li><li>Assist production and quality departments in analyse and troubleshooting to achieve good quality products.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Provide cost estimates for new of molding projects / tooling’s to the Project Management Team for project cost simulation.</li><li>Perform DFM (design for manufacturability) on new products, participate in the concept development of molds, automations and manual processes.</li><li>Standardize, improve tool design to achieve optimized lead-time, cost and safety requirement.</li><li>Carry out qualification tests on molds, machine and manual process</li><li>Ensure that all production machines, tooling and equipment which are being procured, installed and qualified promptly for production.</li><li>Investigate identify root causes and establish Corrective, Preventive Plan with effectiveness</li><li>Participate in Process FMEA and Design FMEA</li><li>Create and maintain mold drawings, standard work for the production.</li><li>Train and guide Mold Technicians in Mold maintenance and setup.</li><li>Participate in 6-Sigma projects, Kaizen events and other Improvement activities.</li><li>Perform any other duties which may be needed by the company related to engineering and production matters.&nbsp;</li><li>Assist production and quality departments in analyses and troubleshooting to achieving good quality products.</li><li>Initiate and implement programs such as continuous improvements, scrap reduction, cost reduction of raw material, cycle time reduction.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Perform DFM, provide concept development, cost estimates for new molding tools to the Project Management Team for project cost simulation.</li><li>Develop and optimize new product manufacturing process.</li><li>Follow company specifications and comply with environmental management system’s procedures.</li><li>Follow company WSH specifications and procedures and ensure that staffs comply.</li></ul> Requirements: <ul><li>Degree or Diploma in Mechanical / Production Engineering.</li><li>2-3 years relevant working experience in a Manufacturing environment.</li><li>Familiar with Pro-E (Creo), SolidWorks or AUTOCAD.</li><li>Good knowledge in design &amp; development of Injection molds.</li><li>Good knowledge in tool making, tool-steel application / selection and heat treatment process.</li><li>Familiar with Molding automation process.</li></ul>

Responsibilities: <ul><li>Experience in IT, with at least 5 years in Intune and EUC management.</li><li>Strong expertise in managing Windows and Mac devices in hybrid and cloud environments.</li><li>In-depth knowledge of Azure AD, Microsoft 365, and other Microsoft ecosystem tools.</li><li>Experience with scripting and automation (e.g., PowerShell, Bash, Python).</li><li>Familiarity with EUC tools and platforms like Jamf for Mac device management.</li><li>Solid understanding of security frameworks and compliance standards.</li></ul> Microsoft Intune Management: <ul><li>Act as the primary owner for Microsoft Intune, managing its implementation, configuration, and optimization.</li><li>Design and enforce policies for device compliance, security, and conditional access for Windows, Mac, and mobile devices.</li><li>Oversee app lifecycle management, including deployment, updates, and retirement.</li></ul> EUC Leadership: <ul><li>Lead the EUC team to deliver high-quality end-user device management services across the organization.</li><li>Define and implement strategies to enhance user productivity and experience while maintaining security and compliance.</li><li>Collaborate with IT, security, and operations teams to align EUC solutions with organizational goals.</li></ul> Endpoint Lifecycle Management: <ul><li>Manage the full lifecycle of endpoints, including provisioning, patching, monitoring, and decommissioning.</li><li>Leverage automation tools and scripts (e.g., PowerShell) to streamline endpoint management processes.</li><li>Ensure seamless device onboarding for both Windows and Mac environments.</li></ul> Security and Compliance: <ul><li>Implement and manage security baselines, encryption, and data protection policies for all endpoints.</li><li>Ensure compliance with industry standards such as GDPR, ISO, and other relevant regulations.</li><li>Conduct regular audits and vulnerability assessments for endpoint devices.</li></ul> Continuous Improvement: <ul><li>Stay updated on the latest developments in Intune, EUC technologies, and device management trends.</li><li>Proactively identify opportunities to enhance the performance, reliability, and security of EUC solutions.</li><li>Lead efforts to modernize the EUC environment, including adopting zero-trust principles and cloud-based solutions.</li></ul> Team Leadership and Support: <ul><li>Provide mentorship and guidance to EUC team members, fostering a culture of innovation and collaboration.</li><li>Act as the escalation point for complex technical issues related to Intune and EUC.</li><li>Develop and maintain comprehensive documentation, including architecture diagrams, processes, and user guides.</li></ul> Requirements: <ul><li>Degree in IT or related field.</li><li>8 to 10 years’ working experience in IT companies with 5 years in Intune and EUC management.</li><li>Strong track record of managing EUC environment and executing projects.</li></ul>

Responsibilities: <ul><li>Manage and optimize Salesforce functionalities to enhance operational efficiency across the organisation.</li><li>Collaborate with cross-functional team to identify and implement Salesforce best practices.</li><li>Develop and maintain reports, dashboards, and workflows to support data-driven decision-making.</li><li>Train and support end-users to ensure proficiency in Salesforce usage and tools.</li><li>Conduct regular system audits to ensure data integrity and compliance with regulatory requirements.</li><li>Maintain up-to-date knowledge of Salesforce updates and industry trends to recommend improvements.</li><li>Provide technical support and troubleshooting for Salesforce-related issues.</li><li>Work with stakeholders to gather requirements and translate them into effective Salesforce solutions</li></ul> Requirements: <ul><li>Salesforce Administrator Certification preferred.</li><li>Proficiency in Salesforce platform and tools, with a strong understanding of CRM concepts.</li><li>Excellent analytical and problem-solving skills.</li><li>Strong communication and interpersonal skills to effectively work with various stakeholders.</li></ul>

Responsibilities: <ul><li>Non-standard automatic equipment design and development, execute machine mechanism detail design and drawing, build, and execute automation design standard.</li><li>Handle machine or auto assembly line establish by external automation suppliers.</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements: <ul><li>Experience in automating machinery. Strong programming capabilities, expertise in machine design, and a solid understanding of all machine components, including mechanical, electrical, and programming aspects.&nbsp;</li><li>Hands-on experience working with these components and the ability to drive improvements and automation within the system.</li><li>Background in automating assembly machines, as well as experience with molding, stamping, and plating machines.</li><li>Familiar with these processes—assembly, plating, molding, and stamping. But overall, the key requirement is strong machine automation experience.</li><li>Background in machine design and a strong understanding of machine components, including electrical, mechanical, and programming capabilities.</li><li>Candidates should present detailed portfolios showing their involvement in designing complex machinery, including visual representations like jigs and machine designs.</li><li>Knowledge in PLC programming, Human machine interface. Know how to use 2D . 3Dsoftware</li><li>Familiar with key manufacturing and engineering documents such as PFMEA, DFMEA, DFM, and FAA, which are critical for this role.</li><li>Proficient in mechanical aspects, with the ability to work with 2D and 3D software such as Creo, Autodesk, and AutoCAD. These skills will be key in ensuring the candidate can contribute to both the design and automation processes effectively.</li></ul>

Responsibilities: Manufacturing Process Development: <ul><li>Define, review and confirm the entire manufacturing process from start to finish.</li><li>Coordinate Design for Manufacturing (DFM) review, and initiate Process Failure Modes and Effects Analysis (PFMEA) with core team members.</li><li>Prepare documentations and process specifications for production.</li><li>Lead team in identification, tracking and resolution of engineering issues using the Failure Analysis and Corrective Action (FACA) form.</li><li>Continuous manufacturing process improvement with company OA tools for cost reduction.</li></ul> Assembly Tool, Fixture and Equipment Development: <ul><li>Evaluate new tool, fixture, and equipment demand/cost for new projects.</li><li>Design and review the tool, fixture and equipment with core team members meeting company engineering and EHS requirement.&nbsp;</li><li>Upload all tooling prints to company data management system(DM.TEC, PDMLink, etc.)</li><li>Discuss and review details of tool/fixture/equipment with outside supplier.</li><li>Follow up the purchasing process to fabricate new tool/fixture/equipment.</li></ul> Qualification for Manufacturing process, Tool, Fixture, and Equipment: <ul><li>Condition all tool, fixture and equipment, lead the tool/fixture/equipment qualification by running samples or LVM.&nbsp;</li><li>Follow up the documentations for qualification, using company standard format and follow up the approval.</li><li>Coordinate pilot run for new products and solve engineering issues, make sure the manufacturing process capability meet engineering, quality and customer requirement.</li></ul> Technician Guidance: <ul><li>Coach, train and develop operator and technician in order to ensure their technique could be succeed and get continuous upgraded.</li></ul> Requirements: <ul><li>Bachelor degree or above. Mechanism engineering related background. </li><li>5 years’ working experiences in related field.</li><li>Good coordination and communication skill, accountability, integrity, customer focus.</li></ul>

Responsibilities: Quality Documents Preparation and Revise. DQIP Workmanship Control Plan: <ul><li>Identify the key process basing on quality control and assure process quality.</li><li>Prepare DQIP, workmanship and Control Plan, and quality control document according to procedure.</li></ul> Setup &amp; FAAR: <ul><li>Basing on product, Process and procedure, review and approve Setup and FAAR report.</li></ul> MSA (GRR), gage: <ul><li>Do assessment on product and measurement tool, prepare MSA (GRR) report. </li><li>Calibrate the inspection equipment as gage and process inspection machine to assure the efficiency.</li></ul> PFMEA: <ul><li>Assure the process risk control basing on efficient PFMEA.</li></ul> NCR &amp; QA instruction: <ul><li>NCR&amp; QA instruction prepare and confirmation, assure the good control on non-confirming parts.</li></ul> Customer Quality: <ul><li>Fast response for customer complaints to drive customer satisfaction</li><li>Drive internal improvement and expansion based on customer complaints</li><li>8D report prepare and TECHS system handling.</li></ul> Process Improvement: <ul><li>In association with engineering department and production department to identify and analyze problems of production process, find out the root cause of failures.</li><li>Do process capability analysis and defect statistic analysis, to increasing the product &amp; process quality</li><li>NPI product and process study to assure the NPI goes well on quality control.</li><li>Engage process improvement, confirm implementing and tracking effects and results.</li></ul> Training: <ul><li>Providing practical training to QC and operators</li><li>Quality Improvement Summary and Sharing</li></ul> Requirements: Education, Technical Qualification &amp; Experience: <ul><li>Bachelor’s degree in technical or related major.&nbsp;</li><li>Minimum 1 year working experience in Quality management， connector working experience preferred.</li><li>English can be working language</li><li>SA、SPC、FACA, Familiar with quality management tools, such as MSA, SPC, FACA etc</li><li>Personal Attributes &amp; Competencies</li><li>Integrity; Accountability; Communication; Outgoing.</li><li>Good capability of logical thinking, self-study and independent problem solving</li></ul>

Responsibilities: <ul><li>Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.</li><li>Drives for excellence in existing Stamping technologies and methods.</li><li>Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.</li><li>Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product</li><li>Designs for manufacturability, providing stamping process expert knowledge and general knowledge of stamping processes to realize product samples and prototypes.</li><li>Provides stamping process expert knowledge and general knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams,</li><li>deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.</li><li>Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.</li><li>Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.</li><li>Documents all related processes in applicable company systems.</li><li>Supports supply chain to verify related suppliers’ compliance and capability.</li><li>Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.</li><li>Maintains and adheres to all appropriate specifications, regulatory and customer requirements.</li><li>Applies stamping process expertise to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.</li><li>Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.</li><li>Drives results primarily through collaboration and influence, not through direct reporting relationships.</li><li>Provides training and mentorship to other professional employees.</li><li>Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies.</li></ul> Requirements: <ul><li>Minimum 8 years of related experience.</li><li>Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.</li><li>Demonstrates stamping process expertise (process optimization, capability, troubleshooting)</li><li>Tight tolerance electrical connector experience is a plus!</li><li>Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!</li><li>Fluent in English (read, write, and speak).</li><li>Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.</li><li>Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;</li><li>Broad project management skill and experience – Ability to work on several projects at once.</li><li>Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.</li></ul>

Responsibilities: <ul><li>Process freight invoices for payment. Investigating and resolving freight invoices that are on hold for review.&nbsp;</li><li>Ensure transportation carriers are paid within established payment terms.</li><li>Audit rates and freight invoices for accuracy. Ensure systems are updated with missing and incorrect information.&nbsp;</li><li>Interface with transportation providers and company Transportation Associates to resolve invoice discrepancies and communicate payment details.</li><li>Run and distribute reports as required. Need to be MIS report savvy with understanding of all latest tools.</li><li>Support all financial audit request related to internal and external audit of freight payments.&nbsp;</li><li>Ensure to monitor &amp; work on open accruals &amp; thereby ensuring aging between accruals vs invoice postings is kept to 30days or less.</li><li>Drive, monitor &amp; track the hard copies against the transaction entries in SAP with an objective to ensure on-time payment.</li><li>Involve in VAS handling validation &amp; be primary face of contact for carriers. Proactively drive &amp; address all open issues/queries in an organized manner.</li><li>Initiate &amp; drive process improvements by standardizing &amp; defining the process.</li><li>Work in testing and give feedback.</li><li>Support on Project related queries &amp; be backup to project team member</li></ul> Requirements: <ul><li>Bachelor’s Degree in Logistics or Finance related&nbsp;</li><li>0-3 years relevant experience in logistics or accounting related activities in product/manufacturing/ Shared Services.&nbsp;</li><li>Knowledge of accounts payable functions and procedures.</li><li>Expertise on advanced excel &amp; other Microsoft tools.</li><li>Special Qualifications, Knowledge &amp; Skills</li><li>Familiarity with electronic invoicing.</li><li>Prior experience with transportation / logistics software a plus</li><li>Strong Documenting knowledge backed up with analytical skills.</li><li>Excellent interpersonal and communication skills</li><li>Language requirement: English</li></ul>

Responsibilities:•	Has strong impact in Advanced Manufacturing Technology Roadmap driven development projects.•	Drives for excellence in existing Stamping technologies and methods.•	Strives to implement optimized or new manufacturing technologies to provide improved processes and tolerance control.•	Act as a liaison between the Advance Manufacturing Process team and the manufacturing sites teams to collaborate with Product Development in the optimization of part and product designs for manufacturability, providing stamping process expert knowledge and general knowledge of stamping processes to realize product samples and prototypes.•	Provides stamping process expert knowledge and general knowledge and project management to liaise the Advance Manufacturing Process team and the manufacturing sites teams, deploying optimized or new stamping processes to realize advanced manufacturing technology development projects.•	Acts as the binding element between product development and advanced manufacturing &amp; process engineering, ensuring the effectiveness and efficiency of this critical interface.•	Designs, develops, and qualifies stamping processes in compliance with company EH&amp;S, quality and production standards, as well as recognized best in class and industry standards.•	Documents all related processes in applicable company systems.•	Supports supply chain to verify related suppliers’ compliance and capability.•	Initiates and implements stamping related programs to continuously improve quality, cost and cycle time.•	Maintains and adheres to all appropriate specifications, regulatory and customer requirements.•	Applies stamping process expertise to resolve significant / unique / complex issues, where analysis of situations or data requires an in-depth evaluation of variable factors.•	Exercises considerable latitude in determining objectives and approaches to assignment, performing work without appreciable direction.•	Drives results primarily through collaboration and influence, not through direct reporting relationships.•	Provides training and mentorship to other professional employees.•	Provides measurable input to the objectives and goals of the department in support of the function and business unit strategies. Requirements:•	Minimum 8 years of related experience.•	Bachelor’s Degree (Mechanical Engineering or related) required, Master’s preferred.•	Demonstrates stamping process expertise (process optimization, capability, troubleshooting)•	Tight tolerance electrical connector experience is a plus!•	Working knowledge with quality tools (FMEA, Six Sigma, DOE, 8D/Continuous Improvement), is a plus!•	Fluent in English (read, write, and speak).•	Broad knowledge of stamping, plating, and assembly processes for connectors and sockets is desired.•	Practical application of MS Office software (Word, Excel, PPT, Project, &amp; Outlook).&nbsp;•	Broad project management skill and experience – Ability to work on several projects at once.•	Based in China-Qingdao or the Philippines-Batangas mfg. sites and willingness to travel up to 25% average.

Responsibilities: <ul><li>Develop Improvement Strategies: Formulate and implement continuous improvement strategies to enhance supply chain performance.</li><li>Conduct thorough analyses of current supply chain processes to identify inefficiencies and areas for improvement.</li><li>Lead and manage continuous improvement projects, ensuring timely execution and measurable results.</li><li>Collaborate with Cross-Functional Teams: Work closely with procurement, logistics, manufacturing, and IT teams to ensure alignment and integration of improvement initiatives.</li><li>Apply industry best practices and methodologies (e.g., Lean, Six Sigma) to optimize supply chain processes.</li><li>Leverage data analytics to monitor supply chain performance and drive data-driven decision-making.</li><li>Promote a culture of continuous improvement by mentoring team members and encouraging innovative thinking.</li><li>Develop and track key performance indicators (KPIs) to measure the impact of improvement initiatives.</li><li>Design and implement audit processes to systematically evaluate supply chain processes and compliance. (Audit covers People, Processes for Manufacturing, Supply Chain, Production, Upstream management)</li><li>Development of Job Role Standardization, and Qualification Matrix. Drive role documentations, clarity, and accountability.</li><li>Critical Skill Mapping and Assessment: In collaboration with supply chain functional leaders, develop a comprehensive critical skills framework, which is needed to achieve Supply Chain Transformation Vision. Drive assessment of current capabilities - Identifying strengths, weaknesses, and areas for improvement.</li><li>Developing a global training strategy aligned with the SC organizations goals and objectives. Identifying skill gaps and learning needs to determine training priorities. Coordinating and facilitating training sessions, workshops, webinars, and other learning activities.</li><li>Overseeing the creation of training materials and resources.</li><li>Collaborating with subject matter experts to ensure content accuracy and relevance.</li><li>Conduct regular assessments of supply chain performance across all functions to identify strengths and areas for improvement.</li><li>Keep abreast of industry trends, best practices, and new technologies to maintain a competitive edge.</li><li>Identify and mitigate risks within the supply chain to ensure stability and resilience.</li></ul> ﻿Requirements: <ul><li>Role is 40% tactical &amp; 60% strategic</li><li>Report to Director of Supply Chain Transformation for DDN</li><li>A bachelors or masters degree in supply chain management, business administration, industrial engineering, or a related field</li><li>Proven experience (10+ years) in supply chain management, continuous improvement, or related roles.</li><li>Strong numeracy and analytical skills.</li><li>Able to translate data into high-level analysis.</li><li>Experience in developing and implementing audit processes.</li><li>Proficiency in continuous improvement methodologies (e.g., Lean, Six Sigma) and tools.</li><li>Excellent leadership as well as Change and project management skills.</li><li>Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams.</li><li>Influencing skills (build relationship, mentor, work under pressure)</li><li>Proven experience in delivering training programs.</li><li>Experience in building and maintaining a network of supply chain professionals, fostering knowledge-sharing, and facilitating collaboration.</li><li>Strong knowledge and experience in supply chain management (areas such as supply planning, production planning, inventory management, logistics, and distribution), best practices, and industry trends on a global scale.</li><li>Knowledge of supply chain management systems &amp; Tools (MES, ERP, …)</li></ul>

Skills

Industry

Location

Jobtitle

112 code versioning tools git Jobs found

Manufacturing Engineer(Molding)

End-User Computing (EUC) Lead

Salesforce Administrator

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Logistics Analyst

Staff Manufacturing & Process Development Engineer – Molding

Supply Chain Continuous Improvement Leader

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

112 code versioning tools git Jobs found

Manufacturing Engineer(Molding)

End-User Computing (EUC) Lead

Salesforce Administrator

Mfg & Process DVL Engineer II (Automation)

Cable Assembly - Senior MPD Engineer

Quality Engineer

Staff Manufacturing & Process Development Engineer – Stamping

Logistics Analyst

Staff Manufacturing & Process Development Engineer – Molding

Supply Chain Continuous Improvement Leader

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.