Manufacturing Engineer(Molding)

Salesforce Administrator

Process Quality Manager

Info Connector Assembly Process Engineer

Finance Manager

Sr. Electrical Engineer

TA Coordinator

IT Engineer

Mfg & Process DVL Engineer II (Automation)

Responsibilities: <ul><li>Participate in oversea transfer program and ensure molding machines, mold tooling’s and processes are installed and qualified promptly for production.</li><li>Initiate tooling, process and quality improvements to improve productivity.</li><li>Assist production and quality departments in analyse and troubleshooting to achieve good quality products.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Provide cost estimates for new of molding projects / tooling’s to the Project Management Team for project cost simulation.</li><li>Perform DFM (design for manufacturability) on new products, participate in the concept development of molds, automations and manual processes.</li><li>Standardize, improve tool design to achieve optimized lead-time, cost and safety requirement.</li><li>Carry out qualification tests on molds, machine and manual process</li><li>Ensure that all production machines, tooling and equipment which are being procured, installed and qualified promptly for production.</li><li>Investigate identify root causes and establish Corrective, Preventive Plan with effectiveness</li><li>Participate in Process FMEA and Design FMEA</li><li>Create and maintain mold drawings, standard work for the production.</li><li>Train and guide Mold Technicians in Mold maintenance and setup.</li><li>Participate in 6-Sigma projects, Kaizen events and other Improvement activities.</li><li>Perform any other duties which may be needed by the company related to engineering and production matters.&nbsp;</li><li>Assist production and quality departments in analyses and troubleshooting to achieving good quality products.</li><li>Initiate and implement programs such as continuous improvements, scrap reduction, cost reduction of raw material, cycle time reduction.</li><li>Provide Engineering support to the production team during new product start-up and initial production.</li><li>Perform DFM, provide concept development, cost estimates for new molding tools to the Project Management Team for project cost simulation.</li><li>Develop and optimize new product manufacturing process.</li><li>Follow company specifications and comply with environmental management system’s procedures.</li><li>Follow company WSH specifications and procedures and ensure that staffs comply.</li></ul> Requirements: <ul><li>Degree or Diploma in Mechanical / Production Engineering.</li><li>2-3 years relevant working experience in a Manufacturing environment.</li><li>Familiar with Pro-E (Creo), SolidWorks or AUTOCAD.</li><li>Good knowledge in design &amp; development of Injection molds.</li><li>Good knowledge in tool making, tool-steel application / selection and heat treatment process.</li><li>Familiar with Molding automation process.</li></ul>

Responsibilities: <ul><li>Manage and optimize Salesforce functionalities to enhance operational efficiency across the organisation.</li><li>Collaborate with cross-functional team to identify and implement Salesforce best practices.</li><li>Develop and maintain reports, dashboards, and workflows to support data-driven decision-making.</li><li>Train and support end-users to ensure proficiency in Salesforce usage and tools.</li><li>Conduct regular system audits to ensure data integrity and compliance with regulatory requirements.</li><li>Maintain up-to-date knowledge of Salesforce updates and industry trends to recommend improvements.</li><li>Provide technical support and troubleshooting for Salesforce-related issues.</li><li>Work with stakeholders to gather requirements and translate them into effective Salesforce solutions</li></ul> Requirements: <ul><li>Salesforce Administrator Certification preferred.</li><li>Proficiency in Salesforce platform and tools, with a strong understanding of CRM concepts.</li><li>Excellent analytical and problem-solving skills.</li><li>Strong communication and interpersonal skills to effectively work with various stakeholders.</li></ul>

Responsibilities: Goal Setting <ul><li>Production area Key performance setting base on Quality strategy</li><li>To let each engineer clear understand own KPI and dedicate to quality improvement toward to corporate strategy</li></ul> Customer Complaint handling <ul><li>Review 8D report, monitor customer complaint quantity, response time, 8D score, and improvement effectiveness.</li><li>To improve customer satisfaction and compliance the strategy to ECE</li></ul> COPQ Reduction <ul><li>Direct and support to analysis the production data, find the quality improvement opportunity and lead team to determine the actions, follow up and verify the improvement result, take</li><li>reaction base on the actual result.</li><li>To control scrap cost and continue improvement process quality to contribute cost saving.</li></ul> CIP <ul><li>Review historical data to identify CIP projects, and follow up the progress.</li><li>To continual reduce COPQ and prevent customer complaint as well as efficiency improvement.</li></ul> Audit supports <ul><li>Coordinate and support external and internal audits, communicate about audit findings and lead the corrective actions where appropriate to ensure that audits are completed in a timely</li><li>manner</li></ul> People Management <ul><li>Allocate work across direct reports; monitor and review their performance; mentor, coach and motivate them; and help resolve people/functional issues to achieve the targeted team</li><li>performance and retain talent</li></ul> Lesson learn <ul><li>Share experience with team to prevent potential quality risk.</li></ul> Requirements: Education:&nbsp; <ul><li>Bachelor degree or above in Mechanical, Electronics or relevant&nbsp;</li></ul> Qualification &amp; Certification: <ul><li>APQP, PPAP, FMEA, SPC, MSA certification;</li></ul> Experience: <ul><li>More than 5 years of working experience in quality process management, Automotive experience must be.&nbsp;</li></ul> Technical Skill &amp; Competencies: <ul><li>Master APQP, PPAP, FMEA, SPC, MSA,8D.&nbsp;</li><li>Process audit and product audit skills</li><li>Familiar with ISO9001, IATF16949</li><li>Familiar with 8D method</li><li>Familiar with special characteristic symbol requirements</li><li>Proficient in written and oral English</li><li>Good communication skill, integrity, accountability, logical, self-motivated, ability to work under pressure</li><li>Good interpersonal skill</li></ul>

Responsibilities: <ul><li>Work with manufacturing team to develop new manufacturing process for NPI project.</li><li>Main focus on new project process, fixture design and documentation initiate.</li><li>Evaluation and approve manufacturing process (process flow, fixture, equipment etc. before mass production started).</li><li>Monitor product line and identify opportunity for improvement.</li><li>Review the process change request from manufacturing.</li><li>Review product design and provide DFM inputs.</li><li>Follow new project schedule to ensure the manufacturing process readiness.</li></ul> Requirements: <ul><li>6+ years experiences in manufacturing industry, or relevant.</li><li>Hands-on knowledge and skills on process development including fixture design, PFMEA draft , automotive equipment design.</li><li>Prefer the candidate from auto industry.</li><li>Familiar with connector process and mechanical assembly for small unit.</li><li>Lean manufacturing expert is desirable.</li><li>Familiar with Infotainment connector manufacturing and application, relevant experience is preferred.</li><li>Be familiar with Design for Manufacture (DFM) principles, workflow, PFMEA and methodology.</li><li>Good leadership and reporting skills; ability to communicate well at all levels internally and externally.</li><li>Knowledge of production processes such as cutting, bending, stamping, plating, assembly.</li></ul>

Responsibilities: <ul><li>Support the external accounting services firm in preparation of monthly, quarterly and annual financial statements, including annual compilation of related footnote support materials</li><li>Be responsible for addressing in a timely manner assigned financial accounting and reporting control findings.</li><li>Support in SAP implementation roll out and drive accurate use of Chart of Accounts and reporting in line with the company policies.</li><li>Manage and coordinate the drafting and maintenance of Accounting Policy and Procedures for Group Entity.</li><li>Develop appropriate policies and procedures for assigned processes and take lead for certain common process across the group( Insurance, Payroll,cross Charges, etc).</li><li>Laise with auditor and ensure completion of audit on time for the Singapore group entity with ensuring all relevant supporting documentation.</li><li>Demonstrate and embed the behaviours and competencies that create a risk management mindset and take complete accountability.</li><li>Reviewing and preparing working for journal entries, reconciliations, support sales order and purchase order billing on pricing and ensure appropriate accounting of the same</li><li>Support country head, Business marketing and sales team in preparation of their Review decks and provide finance business partnering for new business proposal.</li></ul> Requirements: Qualifications &amp; Experience: <ul><li>Bachelor’s degree in Finance, Accounting, or Business Administration (CPA, CA, or CFA preferred).</li><li>6 years of experience in financial management, accounting, and reporting.</li><li>Experience in the pharmaceutical, healthcare, or medical devices industry is preferred.</li><li>Strong understanding of Singapore’s financial regulations, taxation, and compliance.</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures.</li><li>Ensuring all tests and procedures meet company and industry standards.</li><li>Creating and optimizing electrical circuits and systems to meet project requirements.</li><li>Creating prototypes and testing electrical components or systems to ensure performance, safety, and compliance with industry standards.</li><li>Preparing test reports for management.</li></ul> ﻿Requirements: <ul><li>BS Degree in Engineering or Science</li><li>5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li><li>Travel: &lt;10%.</li></ul>

Responsibilities: <ul><li>The Talent Attraction Coordinator performs the end-to-end administrative support for the recruitment processes, including candidate invitations, travel coordination and the application management in Applicant Tracking System, as well as pre-onboarding.</li><li>As a coordinator you closely co-operate with the Talent Attraction Partner on the one side and with the Hiring Manager as well as with candidates to ensure a smooth and professional</li></ul> Addition Responsibilities: <ul><li>Additionally, you will maintain all required actions to pre-onboard new hires with the help of vendor and the local HR and HR Services teams.</li><li>As part of Global Talent Attraction team, you will be responsible to ensure that both, candidate and hiring manager, have all required information at hand and feel comfortable within their respective roles during the recruitment cycle.&nbsp;</li><li>Rely on Coordinators to maintain a high level of accuracy and quality for the processes.</li><li>Review applications and conduct interviews.</li><li>Ensure compliance with institutional hiring policies</li></ul> Requirements: <ul><li>Hiring for highly skilled professionals and therefore need a coordination team that has a sense for people and a strong service orientation.</li><li>You bring 2-5 years of work experience in the administrative support field, ideally in Human Resources and you are fluent in English which is a must.</li><li>Your communication skills are excellent, as you will also partner with (Executive) Hiring Managers.</li><li>You have the passion and mindset to work in an international, industrial oriented environment. You are a creative problem solver and a great team player.</li><li>You are flexible and have an eye for detail and at the same time a strong business acumen with excellent organizational and multi-tasking skills.</li><li>You are motivated and eager to take the initiative working independently as well as in a team.</li><li>You are fit in MS Office applications (esp. Outlook), calendar management and experienced with an Applicant Tracking System (e.g. SuccessFactors).</li><li>You demonstrate high appreciation of our core values: Teamwork, Accountability, Innovation, Inclusion, and Integrity.</li></ul>

Responsibilities: <ul><li>Be part of the IT support team works in manufacturing environment and handles IT tickets</li><li>Attend to tickets for incidents, service requests and alerts or problems with IT system.</li><li>Maintain ownership of issues until resolution and ensure close timely.</li><li>Collaborate and work closely with global teams, application teams and third party vendors to resolve issue and minimal downtime.</li><li>Log tickets and set priority in ticketing tool and escalate for next level support if needed.&nbsp;</li><li>Contribute ideas to enhance application to minimize repeating support issues.</li><li>Work on IT enhancement projects and deliver as per schedule.&nbsp;</li><li>Work as part of a global team to support manufacturing environment.</li><li>Provide after-hours support for manufacturing related emergencies.</li><li>Monitor IT incident tickets trending and ensure KPI is achieved.</li></ul> ﻿Requirements: <ul><li>Working knowledge of IT Hardware and basic understanding of network concept.</li><li>At least 3 years of experience supporting endpoints</li><li>Ability to learn and master applications used in manufacturing.</li><li>Willing to work on 12-hour shift patterns</li><li>At least 3 years of working experience in clean room environment.</li><li>Excellent analytical and troubleshooting skill.&nbsp;</li><li>Ability to manage and meet customer expectation and high customer orientation.</li><li>Excellent communication and logical thinking mind set.</li><li>Bachelor’s Degree in Computer Science, Information Technology or related fields.</li></ul>

Responsibilities: <ul><li>The Talent Attraction Coordinator performs the end-to-end administrative support for the recruitment processes, including candidate invitations, travel coordination and the application management in our Applicant Tracking System, as well as pre-onboarding.</li><li>As a coordinator you closely co-operate with the Talent Attraction Partner on the one side and with the Hiring Manager as well as with our candidates to ensure a smooth and professional</li></ul> Addition Responsibilities: <ul><li>Additionally, you will maintain all required actions to pre-onboard our new hires with the help of our vendor and the local HR and HR Services teams.</li><li>As part of our Global Talent Attraction team, you will be responsible to ensure that both, candidate and hiring manager, have all required information at hand and feel comfortable within their respective roles during the recruitment cycle.&nbsp;</li><li>Rely on our Coordinators to maintain a high level of accuracy and quality for the processes.</li></ul> Requirements: <ul><li>Hiring for highly skilled professionals and therefore need a coordination team that has a sense for people and a strong service orientation.</li><li>You bring 2-5 years of work experience in the administrative support field, ideally in Human Resources and you are fluent in English which is a must.</li><li>Your communication skills are excellent, as you will also partner with (Executive) Hiring Managers.</li><li>You have the passion and mindset to work in an international, industrial oriented environment. You are a creative problem solver and a great team player.</li><li>You are flexible and have an eye for detail and at the same time a strong business acumen with excellent organizational and multi-tasking skills.</li><li>You are motivated and eager to take the initiative working independently as well as in a team.</li><li>You are fit in MS Office applications (esp. Outlook), calendar management and experienced with an Applicant Tracking System (e.g. SuccessFactors).</li><li>You demonstrate high appreciation of our core values: Teamwork, Accountability, Innovation, Inclusion, and Integrity.</li></ul>

Responsibilities: <ul><li>Non-standard automatic equipment design and development, execute machine mechanism detail design and drawing, build, and execute automation design standard.</li><li>Handle machine or auto assembly line establish by external automation suppliers.</li><li>Platforming manufacturing process development.</li><li>Challenge product design for manufacturability and cost feasibility.</li><li>Launch product at rate through FACA/QCPA tools (yield, CPK, OEE…)</li><li>Launch product on time with cross function team.</li><li>Process documentation (DFM，FMEAs, WI, FACA/QCPC…)</li></ul> Requirements: <ul><li>Experience in automating machinery. Strong programming capabilities, expertise in machine design, and a solid understanding of all machine components, including mechanical, electrical, and programming aspects.&nbsp;</li><li>Hands-on experience working with these components and the ability to drive improvements and automation within the system.</li><li>Background in automating assembly machines, as well as experience with molding, stamping, and plating machines.</li><li>Familiar with these processes—assembly, plating, molding, and stamping. But overall, the key requirement is strong machine automation experience.</li><li>Background in machine design and a strong understanding of machine components, including electrical, mechanical, and programming capabilities.</li><li>Candidates should present detailed portfolios showing their involvement in designing complex machinery, including visual representations like jigs and machine designs.</li><li>Knowledge in PLC programming, Human machine interface. Know how to use 2D . 3Dsoftware</li><li>Familiar with key manufacturing and engineering documents such as PFMEA, DFMEA, DFM, and FAA, which are critical for this role.</li><li>Proficient in mechanical aspects, with the ability to work with 2D and 3D software such as Creo, Autodesk, and AutoCAD. These skills will be key in ensuring the candidate can contribute to both the design and automation processes effectively.</li></ul>

Skills

Industry

Location

Jobtitle

156 control system engineer Jobs found

Manufacturing Engineer(Molding)

Salesforce Administrator

Process Quality Manager

Info Connector Assembly Process Engineer

Finance Manager

Sr. Electrical Engineer

TA Coordinator

IT Engineer

TA Coordinator

Mfg & Process DVL Engineer II (Automation)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

156 control system engineer Jobs found

Manufacturing Engineer(Molding)

Salesforce Administrator

Process Quality Manager

Info Connector Assembly Process Engineer

Finance Manager

Sr. Electrical Engineer

TA Coordinator

IT Engineer

TA Coordinator

Mfg & Process DVL Engineer II (Automation)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.