Pipeline Corrosion Engineer

Plant Corrosion Engineer

Piping & Valves Engineer

Quality Control

Non-Destructive Testing (NDT) Engineer

Business Control Manager

Risk and Control Lead

Chemist III

Flight Control Law Engineer

Flight Control Systems Engineer

Role Description: <ul><li>We are seeking a Pipelines Corrosion Engineer to join the Northern Area Corrosion &amp; Inspection Division (NAC&amp;ID), under Northern Area Technical Support Department (NATSD).</li><li>NATSD provides engineering support for the Northern Area Oil Operations with specialized engineering and technical knowledge in the areas of various disciplines to maximize profitability and meet the highest standards of safety and environment.&nbsp;</li></ul> Responsibilities: <ul><li>Develop Pipelines Corrosion Integrity Management Plans (PCIM) for the operating facilities as per our client and international standards.</li><li>Develop, implement and maintain corrosion mitigation plans for the operating pipelines through chemical treatment (corrosion inhibitors, scale inhibitors, biocides, oxygen scavenger etc.), coating, CP and material selection</li><li>Conduct corrosion mitigation and integrity review to optimize the inspection and corrosion programs to maintain the integrity.</li><li>Carry out failure investigation and provide recommendations to prevent failures and improve integrity of the field piping and pipelines.</li><li>Develop, maintain and optimize On-Stream Inspection (OSI) programs for the field piping</li><li>Support facility improvements by reviewing design packages for maintain potential and new projects and providing comments related to corrosion monitoring, corrosion mitigation plans including but not limited to material selection, installation of Corrosion Monitoring systems (CMS), Chemical Treatments, Corrosion Risk Management, OSI etc.</li><li>Work with inspection during plant shutdown and during turnaround and inspection (T&amp;I) for evaluation of internal and external corrosion issues and coating assessments Work with inspection on all corrosion and inspection programs related to field piping and pipelines such as OSI program, dead leg program, IOW, KPIs etc.</li></ul> Requirements: <ul><li>Shall hold a Bachelor’s degree in materials, metallurgical, chemical engineering or Msc. in corrosion engineering Shall have NACE Pipeline Corrosion Integrity Management (PCIM) Technologist certification, NACE Senior Corrosion Technologist certification or NACE Senior Internal Corrosion Technologist certification.</li><li>NACE specialist certifications would be considered advantageous</li><li>Should have a Minimum of 15 years’ experience in the oil &amp; gas industry.&nbsp;</li><li>At least 5 years’ experience in pipelines inspection, corrosion and integrity management including Inline Inspection (ILI) data evaluation and direct assessment examination</li><li>Must have a Knowledge of internal and external corrosion mechanisms common to upstream oil and gas pipelines and corresponding pipelines corrosion Integrity management</li><li>Must have a Knowledge of corrosion mitigation (coating, cathodic protection, chemical inhibition and material selection, scraping) &amp; corrosion monitoring techniques (coupons, probes, on-stream inspection, in line inspection, etc.)</li><li>Must be familiar with government regulations and industry codes and standards (NACE, API, ASME, etc.), specifically pipelines integrity</li><li>Must have a working experience of reviewing pipelines inline Inspection data, fitness for service, corrosion mitigation program and integrity management development&nbsp;</li></ul>

Overview: We are seeking a Corrosion Engineer to join the Northern Area Corrosion &amp; Inspection Division (NAC&amp;ID), under Northern Area Technical Support Department (NATSD). NATSD provides engineering support for the Northern Area Oil Operations with specialized engineering and technical knowledge in the areas of various disciplines to maximize profitability and meet the highest standards of safety and environment. Responsibilities: <ul><li>Develop Corrosion Management Plans (CMP) for the operating facilities as perstandards</li><li>Develop, implement and maintain corrosion mitigation plans for the operating facilities through chemical treatment (corrosion inhibitors, scale inhibitors, biocides, oxygen scavenger etc.), coating and material selection</li><li>Conduct assessments for onshore and offshore facilities.</li><li>This includes scheduling the implementation of initial/evergreening assessments, facilitating the data collection and entry into the software etc.</li><li>Develop and implement corrosion monitoring plans for the operating facilities using corrosion coupons, corrosion probes</li><li>Carry out failure investigation and provide recommendations to prevent failures and improve integrity of the plants and pipelines Develop, maintain and optimize On-Stream Inspection (OSI) programs for the facilities</li><li>Support facility improvements by reviewing design packages for maintain potential and new projects and providing comments related to corrosion monitoring, corrosion mitigation plans including but not limited to material selection, installation of Corrosion Monitoring systems (CMS), Chemical Treatments, Corrosion Risk Management, OSI etc.</li><li>Work with inspection during plant shutdown and during turnaround and inspection (T&amp;I) for evaluation of internal and external corrosion issues and coating assessments</li></ul> Requirements: <ul><li>As the successful candidate you Will hold a Bachelor’s degree in materials, metallurgical or chemical engineering (or other relevant discipline) with a focus on corrosion.</li><li>Shall have NACE senior Corrosion Technologist certification. NACE specialist certifications would be considered advantageous</li><li>Should have a Minimum of 15 years’ experience in the oil &amp; gas industry.&nbsp;</li><li>At least 5 years’ experience in Risk-Based Inspection analysis methodology including qualitative and quantitative/semi-quantitative assessment skills of the probability of failure (PoF) and the consequence of failure (CoF).</li><li>You should have API-580 certification.</li><li>Must have a Knowledge of internal and external corrosion mechanisms common to upstream oil and gas industry and corresponding corrosion management</li><li>Must have a Knowledge of corrosion mitigation (coating, cathodic protection, chemical inhibition and material selection) &amp; corrosion monitoring techniques (coupons, probes, on-stream inspection, in-line inspection, etc.)</li><li>Are familiar with government regulations and industry codes and standards (NACE, API, ASME, etc.), specifically regarding equipment integrity</li><li>Have a working experience of reviewing the project proposal, projects design, and detail design and construction stages</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: Process Quality Control: <ul><li>Periodic Inspection and analysis of Beverages, fruit drinks. Juices, Soymilks, Ketchups &amp; instant tea &amp; Coffee premixes.</li><li>Analysis of online blend samples and finished products for physicochemical and sensory parameters.</li><li>Periodic Checks for Finished Goods during packing operations.</li><li>Checks of finished Goods in warehouse, first pass &amp; second pass quality checks &amp; analysis.</li><li>Monitoring &amp; analysis of Water treatment plant (Coagulation Water/ RO water).</li><li>Verification of records pertaining to Quality &amp; food safety.</li><li>Monitoring GMP compliance.</li><li>Customer complaint analysis &amp; RCA &amp; CAPA</li><li>Timely Reporting of non-conformances observed and their resolution with RCA &amp; CAPA.</li><li>Monitor adherence to SOPs in blending and packing operations.</li><li>Understand production issues and mitigate critical issues escalated; Guide team to resolve day to day to operational issues and own the SAP release and data reporting of India production.</li></ul> Routine Audits: <ul><li>Conduct weekly and monthly audits like PHC, GMP, Super six etc.</li><li>Oversee execution of all internal audits for the Mandideep plant, including audits for global and internal systems.</li><li>Track and review all system related audit documentation: FFSC, QMS new standards, any SOPs, process change IQ/PQ/OQ and be cognizant of risks and hazards related to quality.</li></ul> Training and development <ul><li>Identify training needs for the plant based on product and quality requirements; Provide directions to the team for capability building</li><li>Oversee internal training sessions to be conducted as per agreed timelines</li><li>Plan trainings for the team to explain quality parameters and guidelines on a regular basis; Measure training effectiveness on a regular basis</li></ul> Process Improvements <ul><li>Constantly track the market to understand best practices in the areas of quality assurance and quality testing</li><li>Periodically review own areas of operations to seek opportunities to bring in best practices and reduce consumer complaints.</li><li>Present opportunities and benefits of incorporating newer methods to the supervisor</li><li>Assign approved initiatives to team and track progress; Actively participate in pilots and communicating initiative to other departments; Guide team as required</li></ul> Personal Capability Development: <ul><li>Responsible and committed for the training and development plan for self</li><li>Be the ‘owner’ for continuous growth under the supervision of the QRC Head</li></ul> Requirements: Knowledge: <ul><li>Basic knowledge of technology fundamentals</li><li>Deep understanding of food safety and Quality</li><li>Understanding of FMCG Business and Financial Understanding</li><li>Experience in Project Quality Assurance, Process Quality, Supplier Technical Assurance Quality management system and regulatory compliance</li><li>Plant with co-manufacturing handling experience preferred</li></ul> Skills: <ul><li>Hands on knowledge on handling and calibration of analytical instruments.</li><li>Experience in Chemical analysis of food beverages.</li><li>Able to demonstrate knowledge on Quality Management Standards appropriate to the business with experience of their application in a large scale-manufacturing and packing environment.</li><li>Exposure/ knowledge on FSSAI and other relevant regulations of the industry</li><li>Experience on use of statistical tools and their applications</li><li>Strong interpersonal skills, good communicator, sound administrator with very good working knowledge of computer.</li><li>Should be conversant with latest best practices on quality management.</li><li>Ability to work in a collaborative manner with various functions across the organization.</li><li>Exposure in handling global clients with strong leadership skills for managing the internal teams.</li><li>Demonstrated change management abilities, including conflict resolution skills.</li></ul> Education: <ul><li>Graduate/ Postgraduate in Food/ Dairy Technology/ Microbiology or Chemistry</li></ul> Experience: <ul><li>3-5 Years of relevant experience in Quality/ manufacturing function in a food &amp; beverage industry of good repute.</li></ul>

Role Description: <ul><li>Our Partner occupies a unique position in the global energy industry. They are the worlds largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer.</li><li>With their significant investment in technology and infrastructure, they strive to maximize the value of the energy they produce for the world along with a commitment to enhance our partners value to society.</li><li>Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, they combine market discipline with a generations’ spanning view of the future, born of their nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven our partner to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that they supply.</li></ul> Responsibilities: <ul><li>Identify and evaluate inspection and NDT technologies for supporting operating facilities and capital projects.</li><li>Work with new inspection technologies.</li><li>Develop engineering design, assessment and analysis of inspection technologies and propose them for procurement and deployment through the available company channels.</li><li>Perform NDT inspections and evaluate NDT technologies and systems to detect, measure, and monitor deterioration mechanisms.</li><li>Perform inspection activities which require traveling periodically to remote and offshore areas.</li><li>Provide technical support and consultation to end users and field proponents on inspection and NDT technologies.</li><li>Make recommendations to procure new Inspection and NDT technologies and/or adapt existing NDT equipment to resolve inspection challenges.</li><li>Develop Inspection Technology Strategies in alignment with corporate strategic objectives and Inspection Department vision and mission.</li><li>Explore future advancement in Inspection and NDT technologies for effective implementation.</li><li>Develop new engineering procedures and techniques to address operational inspection needs, and conduct review and update of existing engineering procedures, including reflecting the new technologies in the company engineering procedures and standards as applicable.</li><li>Establish processes and indicators to assess and monitor the effectiveness of processes and programs.</li><li>Support innovation programs and patenting of genuine ideas for development of inspection solutions, processes, tools, etc.</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Provide mentorship and guidance for young talents to develop competent NDT engineers.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical or Electrical Engineering (higher education is highly desirable) NDT certified Level III in at least two methods</li><li>Fundamentals of Engineering, Professional Engineering, Chartered Engineer, or equivalent certification is highly desirable.</li><li>Minimum 7 years of professional experience in in inspection of assets and inspection and NDT technologies.</li><li>Working knowledge of international codes and standards applicable to inspection such as (API, ASME, AWS, etc.).</li><li>Good knowledge of material engineering properties and specifications, and manufacturing process.</li><li>Knowledge of various forms of material and equipment damage mechanisms, e.g. corrosion, Stress Cracking (SCC), weld defects, High Temperature Hydrogen Attack (HTHA), etc.</li><li>Knowledge of In line inspection (ILI) technologies that include data validation and analysis.</li><li>Knowledge in Artificial Intelligence (AI) and Machine learning for inspection and NDT technologies.</li><li>Able to perform interpretation and analysis if inspection data, using advanced computer software and data-analytics applications</li><li>Economic analysis, planning and budgeting skills</li></ul>

Responsibilities: <ul><li>Finance Partner for site leadership, pro-actively taking responsibility for strategy, budgeting, forecasting processes and business decisions</li><li>Support plant operations with timely and accurate financial reporting and analysis of results (a.o. cost control versus budget, efficiencies &amp; variance reporting, and providing cost forecasts)&nbsp;</li><li>Support site in Sustainability Development Planning plus reporting and analyses of the sites Sustainability performance</li><li>Maintain strong control and reporting of Capital Expenditures, in particular a large on-going expansion.</li><li>Analyse site financials with strong business acumen and guide leadership to make informed, financially sound decisions&nbsp;</li><li>Oversee financial internal and external controls regarding assets (including inventory) and spend</li><li>Collaborate with site Operations Controller on cost price calculations, evaluating inventory and challenging supply chain to maintain proper stock levels, complying with internal control guidelines</li><li>Collaborate with Finance Control Team which is also based in Rayong</li><li>Member of Site Management Team at manufacturing facility</li></ul> Requirements: <ul><li>You hold a University Degree in Accounting.&nbsp;</li><li>Master’s degree in accounting, MBA or CPA preferred.</li><li>Eight plus years of progressive experience in Accounting/Finance environment and international manufacturing or food production required;</li><li>Strong business, financial acumen with demonstrated ability to provide in-depth analysis</li><li>Working knowledge of controlling large CAPEX projects is a plus</li><li>Team player who is adaptable, flexible and comfortable presenting/communicating to various levels of the organization with a variety of goals and purposes&nbsp;</li><li>Experience with ERP, SAP preferred, and advanced Microsoft Excel and PPT skills.</li><li>Experience with dealing with a Board of Investment (BOI) is considered beneficial</li><li>Fluent in English , both in speech as well as in writing.</li></ul>

Responsibilities: <ul><li>implementing the market strategy and ongoing enterprise risk management and internal controls activities(i.e. risk assessment, advisory and review activities) to support the R&amp;C central &amp; regional function, and enable the market management with risk-based decision-making; and</li><li>Supporting and implementing the transformational activities led by the global Risk &amp; Controls function to establish mature and industry-leading risk management and internal controls practice underpinned by efficient risk management processes.</li></ul> Principal Accountabilities&nbsp; <ul><li>Accountability 1: Drive ongoing Integrated Risk Assessment (IRA) exercise, including annual risk assessment, for the market. Ensure a process is in place to identify, assess, monitor, and recommend mitigating responses to key risks in the market. Ensure a risk-based approach is applied when defining risk responses and assigning resources, with the main focus on global risks/projects. Contribute to continuous risk assessment by sharing obtained information and insights.</li><li>Accountability 2: Ensure the IRA plan is timely executed in the market and adequate support is provided to the global projects. All changes to the risk landscape and IRA plan should be aligned with the R&amp;C Manager &amp; communicated to the Market Management Team. Perform quality checks over the reports/deliverables.</li><li>Accountability 3: Support Manager R&amp;C / Head R&amp;C / Area Head R&amp;C in preparing the regional update for the pre-close meeting. Provide changes in the risk landscape including new/emerging risks, key R&amp;C activities during the quarter, update on issues and frauds.</li><li>Accountability 4: Promote risk culture in the organization by regularly engaging with the stakeholders and communicating updates/changes in the risk landscape and related responses. Ensure full and factual information is provided to avoid confusion &amp; conflict.</li><li>Accountability 5: Conduct quarterly meetings with the market management team (MRGC meeting) to provide them updated on emerging risks, issues, and activities of the R&amp;C. Prepare and communicate easy-to-understand yet impactful risk management and internal controls related insights for the markets.</li><li>Accountability 6: Responsible for the design of financial reporting controls during the advisory engagements and communicating to the IBS team. Perform testing over SOX controls under the responsibility of market R&amp;C, report issues identified during the process, including review of the action plan, issue evaluation, etc. in line with PMI best practices and ICFR methodology.</li><li>Accountability 7: Provide support to the R&amp;C Central Team in the global projects/activities.</li><li>Accountability 8: Actively manage and contribute to employees’ engagement and wellbeing. Conduct /provide regular performance and capability assessment of the direct/indirect team members (MAP, talent reviews, etc.). For the direct reports, provide regular and transparent feedback and ensure a development plan is in place.</li><li>The Lead Risk &amp; Controls collaborates with the regional R&amp;C team members, other regional teams, central R&amp;C team members including IBS, Market Teams, other assurance functions (InfoSec, Data Privacy, Ethics &amp; Compliance, and CAD).</li></ul> Requirements: <ul><li>Relationship Building &amp; Positive Friction: Build an enduring relationship with all stakeholders. Use a data-driven approach to challenge constructively, assimilate different points of view and share your own opinion confidently.</li><li>Change Architect: Take action and guide the team in times of ambiguity and effectively work with internal stakeholders.</li><li>Business Acumen: Deep understanding of the business operation, commercial landscape, regulatory environment, and market specifics.</li><li>Bring Real Insights: Leverage data to bring insights and identify areas of elevated/emerging risks, and articulate them clearly.</li><li>Digital &amp; Technology: Understand all technology-related risks, including data protection, privacy, and impact of using technology.</li><li>Project Management: Drive, structure, oversee or support key projects and embed new ways of working.</li></ul> Risk Assurance &amp; Process Excellence:&nbsp; <ul><li>Constantly look for opportunities to increase knowledge of Risk and Controls.</li><li>Knowledge &amp; experience of the SOX program</li><li>Ensure teams are providing effective controls and process guidance with high-quality deliverables.</li><li>Share / learn from other markets/regions.</li></ul> Leadership Dimensions <ul><li>Consumer First: Put consumers/customers first to work as one PMI team. Willingness to work with other markets/regions/ central team, breaking down barriers, and working as One R&amp;C team to help achieve our goals. Champion our new ways of working to quickly adapt and meet our consumer/customer needs.</li><li>Forward Looking: Ask the right questions and then work with others to arrive at the right answers. Seek different perspectives and ideas from multiple sources. Take decisions on time to achieve timely goals/objectives.</li></ul> Empowering People:&nbsp; <ul><li>Give clear direction, measurable objectives &amp; guidance to the direct / indirect team. Proactively seek and provide feedback, and act upon it to help strengthen the organization and develop people. Motivate team members by engaging and empowering them, and ensure people know precisely what is expected of them and what success looks like.</li><li>Foster an inclusive environment enabling us to attract and retain a diverse workforce who can help deliver PMI’s vision of a smoke-free future. Create a work environment where personal situations are understood, differences are valued, and everyone is treated with fairness and respect. Everyone should feel supported, respected, and have the opportunity to achieve their full potential, regardless of their gender, age, race, nationality, gender identity, ethnicity, sexual orientation, religion, disability, or any other diverse characteristic that makes them themselves, visible or invisible.</li></ul> Other Skills <ul><li>Fluent written and verbal English language skills</li><li>Effective communication and presentation skills.</li><li>Curious mindset and positive attitude. Self-starter.</li></ul> Education <ul><li>University degree (MSc) level education (e.g. Economics, Mathematics, Finance, Informatics, etc.)</li><li>Post University Professional Certification/Education – examples: Certified Public Accountant (CPA), Executive Master Internal/Operational Auditor (EMIA), Certified Information Systems Auditor (CISA), Certified Internal Auditor (CIA), Governance Risk Compliance Professional (GRCP)Certification, etc.</li></ul> Work Experience <ul><li>5 years of experience in (Enterprise) Risk Management, Internal Controls, GRC, Audit, Accounting, Finance, or a combination of the six</li><li>‘Big Four’ and/or other public accounting/audit/consulting</li><li>Fast Moving Consumer Goods (FMGC) and Business-to-Consumer (B2C)</li><li class="ql-align-justify">Digitization and transformation projects o Multi-year international / global assignment</li></ul>

Responsibilities: <ul><li>The Chemist III, under minimal supervision, performs QC laboratory chemical analyses of raw materials, in-process materials, stability and finished products, and testing to support process validation.</li><li>Has demonstrated competence in conducting all types of physical and chemical analyses (including complex analyses) using all equipment. Detects, conducts, and reports on OOS/OOT/NOE and other investigations.</li><li>Learns and stays current with regulatory guidances and compendia relevant to laboratories and pharmaceutical manufacturing. Participates in troubleshooting analyses and instrumentation. Trains less senior staff.&nbsp;</li><li>Conducts laboratory analyses according to approved test methods: finished product testing, stability testing, raw material testing, cleaning verification testing and manufacturing in-process testing.</li><li>Typical activities may include buffer/solution preparation, standard preparation and operating analytical instruments: HPLC, UVVis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.</li><li>Uses laboratory software for analyses.</li><li>Reviews and approves laboratory test data and documentation for completeness and compliance.</li><li>Is alert to and detects abnormalities during performances of tests and reviews.</li><li>Elevates abnormalities to Supervisor.</li><li>Performs lab methods transfer and participate in method validation/verification studies</li><li>Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping.</li><li>Cleans lab working surfaces and dispose of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals.</li><li>Troubleshoots instrument/chromatography problems and identifies improvements/CAPAs&nbsp;</li><li>Detects, conducts and reports on OOS/OOT/NOE and other investigations.</li><li>Elevates questionable sample results, OOS, and aberrant results immediately to Supervisor and recommends a course of action.</li><li>Writes, edits and reviews SOPs and laboratory investigations</li><li>Maintains assigned training records current and in-compliance</li><li>Actively assumes/demonstrates responsibility in training others in good documentation practice, practical lab skills, and chemical theories, methodologies and procedures&nbsp;</li><li>Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting.</li><li>Document accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs.</li><li>Follows internal processes related to controlled substances</li><li>Follows EH&amp;S procedures to ensure a safe work environment.</li><li>Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS</li></ul> Requirements: <ul><li>Bachelor of Science Degree in chemistry, chemical engineering or related field with 4+ years’ relevant analytical laboratory experience OR,</li><li>Master’s Degree in above disciplines with 2+ years’ relevant analytical lab experience.</li><li>Has strong knowledge of laboratory software and has expanded knowledge of chromatographic software (e.g. Waters Empower, Agilent ChemStation and Sotax WinSotax), using custom fields, custom calculations and custom reports.</li><li>Full proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.</li><li>Thorough knowledge of applicable safety and standards guidelines, such as SOP, cGMP, GLP, DEA regulations and/or MSDS.</li><li>Has demonstrated competence in conducting chemical analyses.</li><li>Strong knowledge of wet chemistry techniques.</li><li>Competency in Microsoft Office Suite</li><li>Ability to critically review and analyze data, interpret information, and draw conclusions from relevant or missing information, reporting to management</li><li>Ability to display and analyze data in a logical manner.</li><li>Ability to critically review, analyze data, interpret information, and draw conclusions from relevant or missing information.</li><li>Ability to display and analyze data in a logical manner.</li><li>Strong verbal and written communication skills as well as good computer skills.</li><li>Strong attention to details and accurate record keeping.</li><li>Establish and maintain cooperative working relationships with others.</li><li>Solid organizational skills.</li><li>Ability to coach less senior staff and develop laboratory skills and ability.</li><li>Ability to take initiative, set priorities and follow through on assignments</li></ul>

Job Role: <ul><li>Bring your experience and ideas and help us develop software and hardware that will advance our future Military and Commercial products. </li><li>We are developing the future of Army Aviation with the Bell V-280 Future Long-Range Assault Aircraft (FLRAA) and the Bell 360 Invictus Future Attack and Reconnaissance Aircraft (FARA), part of the US Army’s Future Vertical Lift (FVL) modernization effort.&nbsp;</li><li>We are also developing the Bell 525 Relentless, Autonomous Pod Transport (APT), and Bells High-Speed Vertical Take-Off and Landing (HSVTOL) program, a next generation stop-fold tilt-rotor.</li></ul> Responsibilities: <ul><li>flight dynamics, and simulation modeling; understanding of Control Laws (CLAWs) design, linear and non-linear analysis techniques, time, and frequency domain analysis</li><li>the following analysis environments: desktop analysis, piloted software-in-the-loop simulation, piloted software and hardware-in-the loop test labs, and aircraft flight test</li><li>development, verification, validation, and certification of commercial or military aircraft to relevant industry or regulatory standards.</li><li>Exposure to with software development in an embedded or real-time operating systems (RTOS) environment utilizing Model Based Design (MBD) techniques with tools such as MathWorks MATLAB / Simulink with Stateflow and Embedded Coder</li><li>Exposure to the hardware and software associated with Flight Control Systems, Avionics, Electrical System, engine controllers (e.g. FADECs), inertial sensors, air data computers, analog sensors, mission systems, crew stations, and/or actuation devices</li></ul> Requirements: <ul><li>We are looking for inquisitive and driven engineers with a passion to innovate.&nbsp;</li><li>You’ll need a Bachelor’s degree, with a Major in Electrical Engineering, Computer Engineering, Aerospace Engineering, Mechanical Engineering, or Computer Science being preferred.&nbsp;</li><li>Advanced degrees will be considered as additional experience.&nbsp;</li><li>Related degrees with relevant experience will be considered.</li></ul>

Responsibilities: <ul><li>Understand and adhere to enterprise architecture principles and best practices</li><li>Developing web-based applications that interface with multiple SaaS components</li><li>Writing backend end business logic and integrating front end client UI with backend API’s</li><li>Understand overall infrastructure and success measures for designing and implementing architectures and solutions.</li></ul> Requirements: <ul><li>Bachelor of Science Degree is required</li><li>Major in Computer Engineering, Software Engineering, or Computer Science is preferred.</li><li>Bachelor’s Degree in Physics, Electrical, Aerospace, or Mechanical Engineering will be considered with sufficient software development experience.</li><li>Master’s Degree in the Engineering disciplines mentioned above is preferred.</li></ul> Position Requirements: <ul><li>Experience at all levels will be considered with a minimum of 2 years specific experience with flight controls, software, avionics, or electrical systems integration, development, and testing.</li><li>Familiarity with RTCA DO-160, MIL-STD-810, RTCA DO-178, RTCA DO-254, SAE ARP4754A, SAE ARP4761, 14 CFR Part 27 and Part 29 for commercial and military qualification and certification of aircraft systems.</li><li>Experience with Primary Development Environment:</li><li>MathWorks MATLAB / Simulink with Stateflow and Embedded Coder</li><li>C/C++ code</li><li>C# test scripts</li><li>IBM Rational DOORS</li><li>Serena Dimensions / PVCS</li><li>Git</li><li>Mentor Graphics Capital Harness System</li></ul>

Skills

Industry

Location

Jobtitle

156 corrosion control Jobs found

Pipeline Corrosion Engineer

Plant Corrosion Engineer

Piping & Valves Engineer

Quality Control

Non-Destructive Testing (NDT) Engineer

Business Control Manager

Risk and Control Lead

Chemist III

Flight Control Law Engineer

Flight Control Systems Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

156 corrosion control Jobs found

Pipeline Corrosion Engineer

Plant Corrosion Engineer

Piping & Valves Engineer

Quality Control

Non-Destructive Testing (NDT) Engineer

Business Control Manager

Risk and Control Lead

Chemist III

Flight Control Law Engineer

Flight Control Systems Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.