Reliability Engineer

Maintenance Electrical Engineer

Civil & Structural Engineer

Electrical Engineer

Civil & Structural Engineer - ASC - USA

Sr Petroleum Engineer

Geotechnical Engineer (Offshore & Onshore)

Responsibilities: You will be required to perform the following:&nbsp; <ul><li>Perform engineering studies and Identifying the reliability programs, tasks, initiatives and/or studies that are applicable to the facility</li><li>Monitor the reliability performance of the organization through reliability KPIs, and identify lower level KPIs that are applicable to the processes of the facility</li><li>Provide recommendations for bridging gaps identified both by the KPIs and by other means of assessments and provide technical support with regards to their implementation Calculate MTBFs for all equipment, Research failure data, implement and improve equipment reliability, predict equipment failures based on MTBF, vibration trend analysis, and Oil Condition Monitoring data, Introduce new technology.</li><li>Review Engineering Request/Design packages for any machinery modifications or upgrade.</li><li>Establish the level of risk for equipment failure with Maintenance Foreman and Area Maintenance Engineer as well as with the rest of OME team using a Risk Analysis program or Enterprise Asset Performance Management and Evaluate Reliability and innovation ideas pertaining to machinery equipment.</li><li>Failure Analysis Program and Equipment Criticality Assessment&nbsp;</li><li>Root Cause Analysis Taproot TapRooT®&nbsp;</li><li>PMO2000 Program, Bad Actor Program and Zero-Defect Program&nbsp;</li><li>Six Sigma Studies Six Sigma&nbsp;</li><li>Lube Oil Condition Monitoring Lube oil&nbsp;</li><li>Vibration Condition Monitoring&nbsp;</li><li>Electrical Signal Analysis Infrared Analysis</li><li>Ultrasonic Analysis</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelors degree in Mechanical Engineering/Industrial Engineering or Electrical Engineering from a recognized and approved program. </li><li>An advanced degree is preferred in Reliability Engineering.</li><li>You will have no less than 8 years of experience in Reliability Engineering including at least four years in Rotating Equipment or Valve Specialty.</li></ul>

Responsibilities :&nbsp; <ul><li>Provide consultation in all aspects of normal and emergency plant maintenance procedures and standards</li><li>Provide technical support to electrical maintenance and machine shop daily operation</li><li>Ability to perform a stator rewind, testing and vibration analysis for high voltage electric motor</li><li>Support installation, maintenance and repair of electric motor and generator</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements</li><li>Introduce the latest technology in repair methodology</li><li>Ability to design engineering packages</li><li>Provide coaching and knowledge sharing to junior engineers</li><li>Participate in vendor/customer exchange meetings to address questions and concerns</li><li>Participate in standards value engineering</li><li>Assist in Corrective &amp; Preventative Action resolution</li><li>Participate in internal or customer equipment drawing reviews</li><li>Provide specialized engineering assistance to the repair units. </li><li>This may be through the in-house MSSD engineering specialists or from elsewhere in the Saudi our client organization.</li></ul> Requirements :&nbsp; <ul><li>Bachelor’s Degree in Electrical Engineering with a minimum of Nine years’ hands on experience in Electrical field as stipulated above under position description.</li><li>Experience with electrical equipment with applications in the refining, petrochemical and gas processing industries.</li><li>Experience in manufacturing with original high voltage electric Motor equipment manufacturing facility such as, ABB, Siemens, WEG, Alstom, and Westinghouse for motor and generator.</li><li>Excellent command on English reading and writing.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Execute capital projects according to the scope, schedule and budget.</li><li>Perform complex technical and administrative tasks relative to the Design and coordination of civil &amp; structural packages.</li><li>Provide technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities.</li><li>Address technical issues arising in all phases of the project development related to civil &amp; structural packages of the facilities.</li><li>Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.</li><li>Review/provide input to the design of civil/structural packages that fully complies with standards and specifications.</li><li>Manage GES design contractor activities during the development of Pre-FEED &amp; FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.</li><li>Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.</li><li>Have full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.</li><li>Review and resolve day to day contractors’ activities related to assigned project work during construction and ensure HSE compliance.</li><li>Participate in developing civil/structural packages deliverables and others such as plot plans, Piping Plans, foundation details, load assessments, stress analysis, Data Sheets, structural details, BRAs, geotechnical &amp; soil tests, etc.</li><li>Provide design input in identification, sizing, selection, procurement of civil/structural material.</li><li>Provide design input to facilities such as pipe racks, substations, PIBs, control buildings, valve stations, process plants of Oil, Gas, refining, NGL, utilities etc.</li><li>Perform change order scope definition, cost estimation and assist the PM or Company representative in change management process.</li><li>Review weekly/monthly reports on the status/progress of contracts, including project costs and schedule. Attend project meetings e.g. progress, stakeholders, design review, value improvement.</li><li>Review project schedule, coordinate/monitor assigned project progress and challenge below par performance of contractor.</li><li>Review, coordinate, monitor invoices (claimed vs actual) and contractor’s submittals.</li><li>Perform Project Reporting and implementation of company initiatives during project execution.</li><li>Review design/study civil &amp; structural modifications to the facilities.</li><li>Provide routine civil &amp; structural (design and construction) support to facilities.</li><li>Develop and/or review testing procedures for civil &amp; structural packages.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. An advanced degree is preferred.</li><li>You will have fifteen years of experience in the Oil, Gas, and refining industries with a specialty in Civil &amp; Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Design or study electrical modifications to oil &amp; gas facilities, residences and utilities.</li><li>Design electrical aspects of new facilities of the type mentioned above.</li><li>Share Electrical Engineering knowledge, experience, and train young engineers.</li><li>Plan, monitor and improve Energy Management and Efficiency Programs.</li><li>Develop the department Power Reliability Programs to monitor the performance and reliability of electrical systems.</li><li>Review Engineering design packages related to Electrical aspects and appropriate material selection and cost minimization.</li><li>Issue design engineering packages for anode monitoring and Cathodic Protection (CP) systems.</li><li>Conduct electrical surveys, assessments and audits to the department assets related to DC battery systems, CP systems and Solar Systems.</li><li>Develop continuous improvements solutions for electrical challenges.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor degree in Electrical or Power Engineering from a recognized and approved program.&nbsp;</li><li>An advanced degree such as a master degree in an electrical engineering discipline will be advantageous.&nbsp;&nbsp;</li><li>Bachelor’s degree in Electrical Engineering.</li><li>Minimum 14 years of experience in Oil &amp; Gas Industry.</li><li>Must hold a valid driving license and should be medically fit for long distances driving.</li><li>Ability to communicate effectively, both orally and written, in English.</li><li>Ability to develop design packages and conduct studies for electrical systems.</li><li>Must have full knowledge of international standards and best practices such as NEC and IEEE.</li><li>Recommended to have IEEE membership.</li><li>Must have a comprehensive knowledge and practical experience in electrical engineering projects, design, maintenance, assessments, studies, investigations, analysis, optimization, troubleshooting, detailed reports and technical evaluations.</li><li>Must have detailed knowledge and background in power overhead lines, transformers, generators, solar power, battery chargers, battery banks, Cathodic protection, heat traces, pumps, motors, air blowers, power distribution, buildings electrical systems, power metering, electrical cables, electrical material selection criteria, electrical systems sizing and power optimization solutions.</li></ul>

Responsibilities: &nbsp;<ul><li>Execute capital projects according to the scope, schedule, and budget.</li><li>Perform complex technical and administrative tasks relative to the Design and coordination of civil &amp; structural packages.</li><li>Provide technical input and review of the design, construction, pre-commissioning, commissioning, and startup of facilities.</li><li>Address technical issues arising in all phases of the project development related to civil &amp; structural packages of the facilities.</li><li>Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.</li><li>Review/provide input to the design of civil/structural packages that fully complies with our client standards and specifications.</li><li>Manage GES design contractor activities during the development of Pre-FEED &amp; FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.</li><li>Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.</li><li>Have full understanding of contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. </li><li>An advanced degree is preferred.</li><li>You will have 15&nbsp;experience in years of experience in the Oil, Gas, and refining industries with a specialty in Civil &amp; Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field experience including construction, pre-commissioning, commissioning, start up, and operation.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Electrical Engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>Minimum of 15 years working experience in Electrical engineering, with at knowledge and experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with strong written and oral communication skills.</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

Responsibilities: <ul><li>Provide the required technical troubleshooting and assistance to the maintenance staff in resolving power system related problems.</li><li>Provide capital project design reviews and comments for the whole project cycle (design basis scoping paper, project proposals and detailed design packages).</li><li>Perform site activities, such as field engineering, support for pre-commissioning, commissioning and startup.</li><li>Provide all technical support for all field power systems at EWPD facilities and maintain the ETAP models for all plants.</li><li>Prepare conceptual design packages and engineering budgetary cost estimates.</li><li>Develop/review power systems designs for new projects and for extensions to existing systems.</li><li>Review installation, site commissioning and factory acceptance testing for low and high voltage transformers, switchgear, circuit breakers and control gear.</li><li>Analyze the components, design parameters, installation, operation and maintenance requirements of UPS, DC and battery systems.</li><li>Advise on calculation study results and act as leader to implement recommendations. Optimize the conceptual power system design based on system studies.</li><li>Resolve power monitoring system (PMS) software problems.</li><li>Provide project specifications and demonstrate operations and maintenance requirements for transformers, switchgear, circuit breakers and control gear.</li><li>Determine the economics of cost and operation when selecting equipment.</li><li>Assess cathodic protection system.</li><li>Analyze and develop wiring and cable systems designs for new projects and for extensions to existing projects.</li><li>Serve as a technical lead role on ETAP studies, Power Monitoring System (PMS), UPS &amp; DC systems, medium &amp; low voltage Switchgears/Transformers/MCC/Cables/Motors &amp;Generators and protection system during project design and provide support during implementations.</li><li>Analyze cathodic protection surveys and provide recommendations for CP deficiencies.</li><li>Optimize the distribution of CP systems along the pipelines corridors</li><li>Assess the reliability of emergency diesel generators.</li><li>Evaluate the remote power supply and conduct economic analysis for alternative power supply for remote sites.</li><li>Assess the plant grounding and lightning protection systems.</li><li>Assess safety and instrumentation grounding systems and provide recommendations to protect instrumentation and control system against surge and lightning issues.</li></ul>&nbsp;Requirements: <ul><li>BE / BSc in Electrical Engineering.&nbsp;</li><li>Certified as PE in Power field or equivalent, certified as NACE CP (min CP Level-II)&nbsp;</li><li>Project Management Professional (PMP)&nbsp;</li><li>Experience, preferably in the Oil Industry or similar Process Industry.&nbsp;</li></ul>

Responsibilities: As a subject matter expert, you will: <ul><li>Develop conceptual scope of work for oil and gas upstream facilities and reviewing engineering design packages.</li><li>Develop annual business plans and long-term investment plans.</li><li>Very well acquainted with risk assessment approach and HAZOP studies related to upstream facilities.</li><li>Develop and analyze pipe hydraulic simulation models of three phase flow on PC-based software packages e.g. PIPESIM, OLGA and HYSYS</li><li>Develop artificial lift studies including different scenarios of options with cost analysis.</li><li>Provide cost optimizations and perform economic analysis to identify the most cost-effective alternative for upstream facilities development.</li></ul> Requirements: <ul><li>The successful candidate should hold a bachelor degree in engineering from a recognized and approved program.</li><li>MSc or PhD is desirable, but not required.</li><li>You must have minimum of 15-year experience in an Oil&amp;Gas organization with a minimum of 5 years in project related work.</li></ul>

Responsibilities : <ul><li>Conduct analysis and design of offshore/onshore geotechnical structures using geotechnical analysis software such as Plaxis, Slope W, APILE.</li><li>Perform design review of engineering packages prepared by others in support of ongoing Capital and Maintain Potential projects</li><li>Develop and interpret code and standard requirements for offshore/onshore geotechnical designs</li><li>Assess and carry out geotechnical analysis, including offshore and onshore structures</li><li>Participate in Engineering Standard development and reviews</li><li>Conduct vendor technical assessments for geotechnical commodities</li><li>Conduct geotechnical inspections and assessments of existing structures</li><li>Support ongoing Innovation/Technology programs and strategic initiatives</li><li>Assess new and emerging technologies for civil/geotechnical applications</li><li>Act as a professional mentor to developing geotechnical engineers and specialists</li></ul> Requirements : <ul><li>A Bachelor’s Degree in Civil/Geotechnical Engineering. A Master’s Degree or PhD in Civil/Geotechnical Engineering desired but not required</li><li>Minimum eight (10) years of professional engineering design experience</li><li>Professional Engineering or Chartered Engineering Certification</li><li>Familiarity with geotechnical design standards</li><li>Proficient in geotechnical engineering design software (Plaxis, Slope W, APILE)</li></ul>

Skills

Industry

Location

Jobtitle

333 design packages Jobs found

Reliability Engineer

Maintenance Electrical Engineer

Civil & Structural Engineer

Electrical Engineer

Civil & Structural Engineer

Civil & Structural Engineer - ASC - USA

Electrical Engineer

Electrical Engineer

Sr Petroleum Engineer

Geotechnical Engineer (Offshore & Onshore)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

333 design packages Jobs found

Reliability Engineer

Maintenance Electrical Engineer

Civil & Structural Engineer

Electrical Engineer

Civil & Structural Engineer

Civil & Structural Engineer - ASC - USA

Electrical Engineer

Electrical Engineer

Sr Petroleum Engineer

Geotechnical Engineer (Offshore & Onshore)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.