Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Maintenance Technician

Air Logistics Senior Manager - JFK Express Operations

QA Associate II

Principal/Staff/Senior Engineer, APTD CEM - Advanced Packaging Wafer Level Technology Engineering

Senior Engineer, APTD CEM - Advanced Packaging Die Level Technology Engineering

HIG HBM PE Principal Component Validation Engineer

Product Specialist – Implements

Responsibilities: <ul><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce online controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and teamwork.</li><li>Ensure non-conformance is dealt with in a proper and effective manner.</li><li>Establish, review and perform regular update of FMEA, OCAP, Process control, Risk Assessment and SIPOC on all critical processes to ensure a robust process.</li><li>Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.</li></ul> Requirements: <ul><li>Minimum bachelor’s degree in physics / chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>WET Process experience on Wet Etch, WET Resist Strip /Lift off (Single wafer lift off) , Wafer cleaning processes.</li><li>Able to lead and Guide Junior Engineers.</li><li>Able develop new process based on process requirements.</li><li>Good knowledge of wafer fab manufacturing processes, equipment and materials and capable of applying them effectively at work.</li><li>Experience with Microsoft applications.</li></ul>

Responsibilities: <ul><li>Process owner of dry etch/plasma ashing equipment</li><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce on line controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and team work.</li></ul> Requirements: <ul><li>Minimum Bachelor’s degree in Physics / Chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>Possess strong technical competencies in his field of study.</li><li>Good knowledge of statistical and quality tools.</li><li>Able to work under pressure and with strong commitment at work.</li><li>Experience with software applications such as MS Power Point, Excel and Word.</li></ul>

Responsibilities: <ul><li>Develop, maintain, and deploy FDC models to monitor equipment health, detect process faults, and identify abnormal tool or process behavior.&nbsp;</li><li>Design and implement R2R control solutions using feed-forward and feedback strategies to improve recipe control, metrology target achievement, and process stability.</li><li>Deploy, validate, standardize, and scale APC/FDC/R2R models and methodologies across production tools, processes. Collaborate with global teams to standardize APC methodologies across manufacturing sites.</li><li>Design and deploy predictive maintenance models to detect early signs of degradation, anomalies, and potential failures of tools.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Computer Science or&nbsp;Electronic/Electrical Engineering, with preferably min. 2 years’ experience in semiconductor field</li><li>Experience deploying production FDC and/or R2R solutions is an added advantage</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Foundational knowledge of machine learning models, algorithms, mathematics, and statistics is preferred.</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Dynamic, initiative, resourceful, team player and highly self-motivated individual.</li><li>Strong organizational, leadership and interpersonal skills. (Senior/Staff)</li><li>Strong analytical mind. (Senior/Staff)</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment</li><li>Troubleshoot equipment failures and repair as needed</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime</li><li>Perform Lock Out / Tag Out requirements.</li><li>Work from blueprints, manuals, sketches and verbal instructions.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>Good communication skills, both oral and written</li><li>Min 1-3 years experience in manufacturing.</li><li>Ability to work independently</li><li>Must have good or corrected eyesight to insure quality of work</li><li>Ability to lift and carry 25 kg frequently</li><li>Ability to crouch, crawl, climb ladders, and work at various heights</li><li>Good basic math skills</li><li>Good mechanical aptitude, and troubleshooting ability</li><li>Must have a valid drivers license</li></ul>

Responsibilities: <ul><li class="ql-align-justify">Ability to plan, organize, lead and control staff to promote a workplace culture of teamwork, self-motivation, and pride within a diversified and multi-cultural work environment.</li><li class="ql-align-justify">Develop next level leaders and managers in both leadership and management skills</li><li class="ql-align-justify">Supervise staff to meet business needs and facilitate successful outcomes by following carrier’s Service Level Agreement performance standards.</li><li class="ql-align-justify">Ensure operational leadership is monitoring and instructing Lead Agents and Warehouse Agents to follow safety rules and safety standards that are in place. Wear a safety vest at all times while working, walking, or operating equipment within a our client warehouse.</li><li class="ql-align-justify">Participate in recruiting activities, interviewing candidates and making hiring decisions.</li><li class="ql-align-justify">Assist in employee relations and/or conflict resolution, prepare performance appraisals, provide input for counseling and terminations.</li><li class="ql-align-justify">Demonstrate diligence required to maintain security under local Airport Police, Transportation Security Administration (TSA), and United States Customs/Border Protection (USCBP) Regulations and Federal Aviation Administration (FAA). Challenge any persons not displaying an airport I.D. badge within a WFS warehouse or any Airport Operational Area. (AOA).</li><li class="ql-align-justify">Prepare various operational reports, providing weekly and monthly data regularly, including special reports requested on an ad hoc basis.</li><li class="ql-align-justify">Must complete injury reports and damage reports as required.</li><li class="ql-align-justify">Authorize/ensure post-accident and post-injury testing is done as required.</li><li class="ql-align-justify">Assist customer representatives in providing information and data for various compliance reports and audits.</li><li class="ql-align-justify">Maintain records and appointments necessary for employment on the airport such as airport badge appointments, USCBP interviews, or other government-required meetings.</li></ul> Requirements: <ul><li>Bachelors degree (B. A.) from four-year College or university; or two to five years related experience and/or training; or equivalent combination of education and experience</li><li class="ql-align-justify">8-10 years of leadership and management experience withing the warehousing, logistics, or related industry.</li><li class="ql-align-justify">Must possess leadership skills with the ability to train and develop personnel.</li><li>Attention to detail: Must possess the ability to manage multiple priorities while maintaining accuracy in operations, reporting, compliance, documentation, and performance metrics.&nbsp;</li><li class="ql-align-justify">Must be able to continually respond to and prioritize within a fluid work environment.</li><li class="ql-align-justify">Must have ability to work across the 24/7 schedule based on the needs of the business.</li></ul>

Role Description: <ul><li>The Quality Associate I, Operations is responsible for actively participating in “on the floor” Quality activities during product manufacturing and/or packaging. Quality activities include product sampling and inspection, area clearance to confirm process readiness, non-conforming event support to resolve in-process issues, and process validation and qualification activities.</li><li>Communicates to multiple departments and supervision to provide timely process and issue updates.&nbsp;</li><li>Identifies and escalates issues or problems to appropriate supervision.</li><li>Participates as a team member on cross-functional teams. Participates in reviews and structured processes for continuous improvement</li></ul> Responsibilities: <ul><li>Performs physical inspection of in-process and finished product samples as assigned and according to the production schedule.</li><li>Collects samples from manufacturing and packaging according to the defined Batch Production Record and procedure requirements.</li><li>Is competent in all relevant processes (weighing, compounding, mixing, packaging, granulation, compression, coating, Liquids Mfg. and Batch Transfer, Creams &amp; Ointments Mfg. and Batch Transfer, Packaging, etc.) Follows internal processes related to controlled substances.</li><li>Performs GMP-related verifications including area, equipment and line clearances, cleaning, room inspection, material verification, etc. according to procedures</li><li>Actively participates in process validation and equipment qualification activities.</li><li>May execute computer data entries in SAP, Leucine, LIMS, and department databases.</li><li>Sampling and inspection of raw materials, packaging components, in-process, bulk, and finished drug product during manufacturing and packaging operations of commercial and non-commercial processes.</li><li>Performs manufacturing/packaging stage reviews of batch records.</li></ul> Requirements: <ul><li>High school diploma or equivalent with 4-7 years’ relevant experience OR</li><li>AA/AS degree with 3-6 years’ relevant experience OR</li><li>BA/BS degree with 2 -5 years’ relevant experienceRelated discipline and certification in assigned area a plus.</li><li>Experience with statistical sampling methods a plus.</li></ul> Knowledge &amp; Skills <ul><li>Attention to detail.</li><li>Strong documentation skills.</li><li>Ability to read and interpret SOPs and function within the scope of procedures.</li><li>Proficiency with basic math skills and basic experience with computers and software applications required.</li><li>Ability to learn new processes and procedures.</li><li>Able to communicate effectively with other departments, management and operational personnel.</li><li>Customer/Stakeholder focused (understands impact of daily work to compliance and overall business).</li><li>Proof-reading skills; ability to identify errors.</li><li>Ability to read and comprehend documentation and requirements set forth in Batch Production Records (BPRs).</li><li>Experience with Enterprise Resource Planning (ERP) system is a bonus.</li><li>Ability to work overtime as needed, including occasional weekend shifts.</li></ul> Physical Requirements <ul><li>Lift 15 lbs.</li><li>Walk across plant/warehouse.</li><li>Wear appropriate gowning as required.</li><li>Ability to read for extended periods of time.</li></ul>

Responsibilities: <ul><li>Develop wafer-level process technologies including wafer thinning and backside metal interconnect.</li><li>Improve process capability, yield, and manufacturing cost.</li><li>Establish process management projects supporting future technology nodes.</li><li>Evaluate, qualify, and implement new equipment and materials.</li><li>Set process parameters for semiconductor manufacturing equipment.</li><li>Drive process quality through inspection, testing, measurement, SPC, DOE, and defect analysis.</li><li>Develop advanced process controls using data analytics.</li><li>Collaborate with Package Integration, Assembly Engineering, Front-End Wafer Fab, Product Engineering, Assembly/Test Engineering, and Global Quality teams.</li><li>Support product transfer from development through qualification to High Volume Manufacturing (HVM).</li><li>Provide Process of Record (POR) and Model of Record (MOR) documentation.</li></ul> Requirements: <ul><li>B.S./M.S./Ph.D. (or equivalent) in Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or related technical discipline.</li><li>2+ years of semiconductor process development experience, preferably in wafer bonding, plating, warpage control, or advanced packaging.</li><li>Proficiency in Python, R, and SQL.</li><li>Experience with Visual Basic.</li><li>Knowledge of E3, FDC (Fault Detection &amp; Classification), and RMS (Recipe Management System).</li><li>Strong statistical analysis, process modeling, SPC, DOE, and dashboard development skills.</li><li>Strong understanding of semiconductor process interactions, yield, performance, and reliability.</li><li>Excellent problem-solving and root-cause analysis capability.</li><li>Ability to deliver results under aggressive timelines and limited resources.</li></ul>

Responsibilities: <ul><li>Develop and optimize assembly processes for advanced packaging technologies, including wafer-level packaging, Chip-on-Wafer (CoW), and Chip-to-Wafer (C2W) die stacking.</li><li>Improve product quality, yield, productivity, and manufacturing cost.</li><li>Drive process management projects supporting future technology nodes.</li><li>Evaluate, qualify, and implement new equipment and materials.</li><li>Establish process parameters for semiconductor manufacturing equipment.</li><li>Ensure robust quality through process monitoring, inspection, testing, SPC, DOE, and defect analysis.</li><li>Use data analytics to establish advanced process controls and identify improvement opportunities.</li><li>Collaborate with Package Integration, Assembly Engineering, Front-End Wafer Fab, Assembly/Test Engineering, Product Engineering, and Global Quality teams.</li><li>Support seamless transition from product development through qualification into High Volume Manufacturing (HVM).</li><li>Provide Process of Record (POR) and Model of Record (MOR) documentation.</li></ul> Requirements: <ul><li>B.S./M.S./Ph.D. (or equivalent) in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or related technical discipline.</li><li>2+ years of semiconductor process development or equipment evaluation experience, preferably in wafer bonding, die stacking, or advanced packaging.</li><li>Proficiency in Python, R, and SQL.</li><li>Experience with Visual Basic for automation and tool integration.</li><li>Knowledge of E3, FDC (Fault Detection and Classification), and RMS (Recipe Management System).</li><li>Strong data analytics capability supporting SPC, DOE, defect analysis, and dashboards.</li><li>Strong understanding of semiconductor process flows, yield, performance, and reliability.</li><li>Strong problem-solving and root-cause analysis skills.</li><li>Ability to work effectively under aggressive timelines and limited resources.</li></ul>

Responsibilities: <ul><li>Coordinate with internal and external teams to prepare silicon validation activities.</li><li>Partner with manufacturing teams to ensure required resources are available.</li><li>Identify, evaluate, and validate HBM Component Validation equipment and testing flows.</li><li>Ensure silicon performance meets product expectations.</li><li>Debug failures, identify root causes, and implement design or process fixes.</li><li>Collaborate with Design Validation (DV), Quality Assurance (QA), and Global Quality (GQ) teams on customer returns and reliability improvements.</li><li>Partner with Engineering, Manufacturing, and Marketing organizations.</li><li>Develop, troubleshoot, and validate HBM component validation test programs.</li><li>Review datasheets and provide feedback to Application Engineers.</li><li>Prioritize activities across multiple cross-functional teams.</li><li>Provide technical leadership, mentoring, and On-the-Job Training (OJT) for engineers.</li><li>Support technical presentations, seminars, and product-specific expertise</li></ul> Requirements: <ul><li>Bachelors or Masters Degree with a minimum of 10 years of experience, preferably within the memory semiconductor industry.</li><li>Strong programming experience with Linux, Python, C/C++, Verilog, UVM, and version control systems (Git, SVN).</li><li>Excellent analytical, debugging, and problem-solving skills.</li><li>Strong communication, presentation, and data analytics capabilities.</li><li>Basic understanding of HBM and/or DRAM operation and computer networking.</li><li>Self-motivated with the ability to work effectively in collaborative team environments</li></ul>

Responsibilities: Product Planning &amp; Category Management <ul><li>Conduct category research, competitive analysis, and product benchmarking to identify market opportunities and trends.</li><li>Support product roadmap development using market insights and field feedback.</li><li>Define product requirements and specifications aligned with customer applications and regional needs.</li></ul> Technical Evaluation &amp; Product Development Support <ul><li>Evaluate product specifications to ensure performance, reliability, and cost competitiveness.</li><li>Support sourcing, capability assessment, and technical alignment of vendors.</li><li>Lead sample evaluation, field testing, and validation for product selection.</li><li>Provide technical recommendations to cross-functional teams.</li><li>Technical Documentation &amp; Knowledge Management</li><li>Develop and maintain product specs, application guides, and technical documentation.</li><li>Create training materials for internal teams and dealers.</li><li>Ensure accurate and up-to-date product information across systems.</li></ul> Technical Support &amp; Field Enablement <ul><li>Act as the escalation point for complex product issues and provide troubleshooting support.</li><li>Conduct field validations, demonstrations, and performance assessments.</li><li>Collaborate with Service and Quality teams to resolve issues and improve products.</li></ul> Requirements: Education <ul><li>Bachelors degree in Mechanical Engineering, Agricultural Engineering, or a related technical discipline.</li><li>An equivalent combination of technical education and hands-on agricultural/off-highway equipment experience may be considered.</li></ul> Requirements: <ul><li>Minimum 6+ years of experience in the agricultural equipment/tractor implements industry.</li><li>Direct experience with tractor implements and attachments.</li><li>Ability to translate market needs and technical insights into product requirements and business recommendations.</li><li>Experience collaborating with Engineering, Suppliers, Quality, Sales, and other cross-functional teams.</li><li>Strong technical curiosity and ownership mindset.</li></ul>

Skills

Industry

Location

Jobtitle

76 downhole equipment Jobs found

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Maintenance Technician

Air Logistics Senior Manager - JFK Express Operations

QA Associate II

Principal/Staff/Senior Engineer, APTD CEM - Advanced Packaging Wafer Level Technology Engineering

Senior Engineer, APTD CEM - Advanced Packaging Die Level Technology Engineering

HIG HBM PE Principal Component Validation Engineer

Product Specialist – Implements

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

76 downhole equipment Jobs found

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Maintenance Technician

Air Logistics Senior Manager - JFK Express Operations

QA Associate II

Principal/Staff/Senior Engineer, APTD CEM - Advanced Packaging Wafer Level Technology Engineering

Senior Engineer, APTD CEM - Advanced Packaging Die Level Technology Engineering

HIG HBM PE Principal Component Validation Engineer

Product Specialist – Implements

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.