Reliability Technician

Electrical Design Engineer

Sr Power Services Tech - AOC

Civil & Structural Engineer

ASC Civil Structural Design Engineer

Project Engineer (Process / Chemical)

Mechanical Piping Engineer

Instrumentation Lead

Technical Writer

Civil & Structural Engineer - ASC - USA

Responsibilities:The Technician III, Reliability performs facility reliability maintenance activities in accordance with approved procedures requiring limited supervision. Proficient at analyzing and troubleshooting the root cause of facility, manufacturing and packaging equipment problems. Implements effective preventive and/or corrective maintenance repairs to provide increased reliability. Identifies maintenance improvements that increase efficiency, throughput, and quality. May train others in setting up equipment. Identifies and solves complex problems. Understands the practical application to problems and situations ordinarily encountered and makes decisions that require choosing from several options.Requirements:May be required to be proficient in troubleshooting & repair in 4 or more of the following areas:ElectricalHydraulicsPneumaticsMechanicalPLC'sProficient in following areas:Ability to read and follow blueprints and engineered drawings.Ability to use theBMS (Bldg. Management System) for HVACSpecialized in at least 4 of the following 5 areas:Utility – purified water systems, compressed air, boiler, chilled water, electrical distribution, product dust collection systems.Building Maintenance – sewers, electronic card readers (when applicable), lighting.Fire suppression systems.HVAC competence and certification, as required.General building & grounds maintenance.Basic math, writing skills, problem solving.Basic computer skills.Ability to use hand tools.Control Precision - ability to quickly and repeatedly adjust the controls of a machine to exact positions.Basic math, writing skills, problem solving.Education & Experience:A High School Diploma or equivalent is required.Level 3 TechSeven years related experience and certification in assigned area(s), as required.ACCP-Level II Certification or equivalent experience

Responsibilities:Design & Development of Electrical Drawings –SLD’s, wiring diagrams, cable routing layouts, lighting & earthing layouts etc. based on Scope & inputs provided.Design & development of I/O list, instrument loop diagrams, instrument location layouts, JB connection diagrams & PLC enclosure layouts etc.Collaborate with inter disciplines to get the required inputs to update the drawings.Ensure quality of the drawings as per Standards.Requirements:Candidate with 4-6 years’ experience in electrical design & detail engineering in Oil & gas/Chemical/refinery industry.Expertise in AutoCAD/MicroStation tool Hands on experience in designing the electrical and instrumentation drawings like single line diagrams, schematic diagrams, GA’s, Panel drawings, cable routing drawings, loop diagrams & connection diagrams etc. Familiar with electrical design calculations (Cable& conduit sizing, Transformer sizing, lighting calculations, earthing etc.) Able to manage multiple projects at the same time.Good at communication skills.Ability to work collaboratively in a team environment

Role Description:Northern Area Power Operation Department under Power Systems Organization is looking for a candidate who can perform as a fully skilled and experienced Power Services Technician able to perform specialized installation or diagnosis and repair on all types of electrical systems.Provides highly skilled expertise and work direction in commissioning, fault diagnosis, testing, repairing, preventive maintenance and routine maintenance on transformers, large circuit breakers and ancillary equipment for substations, switching stations, power plants and large motor controls and underground power cable including fault locating. Frequently provides work direction to lower-classified Power Services Unit personnel.Responsibilities:As the successful candidate you will be required to perform the following:Perform preventive maintenance, installation, commissioning, testing, repairing, analyze results and troubleshooting the following types of equipment: 480V through 230KV switchgear, oil/air/gas/vacuum circuit breakers, substation power transformers, pad-mounted transformers, pole-mounted transformers, load break switches, high and low voltage disconnect switches, oil switches, circuit switchers, transformer tap changers (auto and manual), reclosers, cooling fans, substation lighting, substation civil maintenance, emergency lighting, bus ducts and insulators, electric and hydraulic maintenance on heavy equipment.            Perform repairs, installs/maintains all types of transmission and distribution high voltage cables such as, solid dielectric (rubber and synthetics) cables, paper insulated lead covered (PILCA) cables, low pressure oil filled (LPOF) cables, and submarine cables and testing of high-pressure oil filled (HPOF) cables. Conduct field repairs on electrical and mechanical components of oil circuit breakers, which include air compressors, hydraulic pumps, mechanical springs, and air systems. Also adjust mechanism on breaker linkage as required.                        Perform commissioning tests on new equipment, recommending final acceptance list exception items, if any.                               Supervise excavation to expose cable faults and loaded/unloaded cable.Perform potential testing, Hi-POT testing on Power Cables.Revise existing equipment and systems to conform to verbal instructions, revised drawings, and work orders; then makes operational test runs for satisfactory repair and acceptance.Acquire clearances, performs switching, receives work permits, and restores equipment to service.Requirements:Minimum Years of Experience: 12Special Field of Experience: Twelve (12) years in power system construction, commissioning, maintenance and operation with emphasis on transmission and distribution.Certified for: BLS/FA, Fire Protection, Work Permit Receiver, cable splicing, test for potential and valid Saudi Arabia Heavy Equipment Driving license (2Xlicense.)Fluent command of the English language, oral and written.Has thorough knowledge of equipment and underground cable safety requirements and U.S. & Saudi Electrical Codes.Ability to read work orders, work permits, vendors’ manuals, and schematic diagrams and to communicate with fellow workers on technical aspects of the job.Good knowledge of Safety Management System and relevant PDI'S.

Responsibilities:You will be required to perform the following:Execute capital projects according to the scope, schedule and budget.Perform complex technical and administrative tasks relative to the Design and coordination of civil & structural packages.Provide technical input and review of the design, construction, pre-commissioning, commissioning and startup of facilities.Address technical issues arising in all phases of the project development related to civil & structural packages of the facilities.Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.Review/provide input to the design of civil/structural packages that fully complies with standards and specifications.Manage GES design contractor activities during the development of Pre-FEED & FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.Have full understanding of contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.Review and resolve day to day contractors’ activities related to assigned project work during construction and ensure HSE compliance.Participate in developing civil/structural packages deliverables and others such as plot plans, Piping Plans, foundation details, load assessments, stress analysis, Data Sheets, structural details, BRAs, geotechnical & soil tests, etc.Provide design input in identification, sizing, selection, procurement of civil/structural material.Provide design input to facilities such as pipe racks, substations, PIBs, control buildings, valve stations, process plants of Oil, Gas, refining, NGL, utilities etc.Perform change order scope definition, cost estimation and assist the PM or Company representative in change management process.Review weekly/monthly reports on the status/progress of contracts, including project costs and schedule. Attend project meetings e.g. progress, stakeholders, design review, value improvement.Review project schedule, coordinate/monitor assigned project progress and challenge below par performance of contractor.Review, coordinate, monitor invoices (claimed vs actual) and contractor’s submittals.Perform Project Reporting and implementation of company initiatives during project execution.Review design/study civil & structural modifications to the facilities.Provide routine civil & structural (design and construction) support to facilities.Develop and/or review testing procedures for civil & structural packages.Requirements:As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. An advanced degree is preferred.You will have fifteen years of experience in the Oil, Gas, and refining industries with a specialty in Civil & Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field

Responsibilities:You will be required to perform the following:Produce a full-fledged engineering design package that includes all required documents/drawings, for all onshore and offshore oil and gas facilities throughout the Northern Area. The design work requires a thorough knowledge and familiarity with the company and industry standards.Perform structural design including production of construction documents related to onshore/offshore hydrocarbon facilities.Identify design requirements and prepare necessary design calculations using hand calculations and software such as STAADPro V8i or equivalent finite element analysis software.Perform engineering assessments for the repair of deteriorated concrete, prepare technical reports and verify ‘As-Built’ record drawings for accuracy.Prepare layout plans and structural engineering details for development by draftsmen and designers.Prepare detailed scope of work, material take-offs and cost estimates as part of the construction documents.Perform field activities such as site surveys and record existing field conditions, take and verify measurements within project area.Participate in projects walkthroughs and provide reports of findings.Provide mentoring and transfer knowledge, skills and experience to entry-level engineers and designers.Requirements:The candidate shall hold a Bachelor degree in Civil Engineering. A Master’s degree in Structural Engineering is preferred. You must have interpersonal skills including ability to communicate and contribute positively to the project design team.A minimum of ten-year experience in structural engineering design of reinforced concrete, steel, masonry and wood structures using US Design Codes and Standards. Extensive experience using industry codes such as ASCE, ACI, AISC, UBC is required. In addition, the candidate shall have basic architectural knowledge, enough to serve basic building re-designs/renovations/remodeling.You should have expertise in using STAADPro software. In addition, you should have working knowledge of Microstation or other drafting software. It is required to have a strong technical and engineering design skills in a design office environment. A Professional Engineering Registration/License from the US/CA is a plus.The candidate must be physically fit to visit offshore sites, which requires going by chopper or boat. There shall be no physical/medical restrictions.

Responsibilities:You will be required to perform the following:Design and/or study of chemical modification to oil & gas processing, oil handling and utilizes facilities.Manage and execute capital projects according to the work scope, schedule and budget.Ensuring compliance to company standards, procedures, policies and agreed work specifications.Responsible for project development: preliminary engineering to detail designs to construction and the final and safe turnover to proponent.Manage General Engineering Services (GES) design contractor activities during the development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Develop and preparation of contracting plan and strategy for solicitation, evaluation and award of contract for detail engineering, procurement and construction.Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.Coordinate activities and resolve issues among proponents, contractors and other parties to allow construction activities to progress according to plan and final mechanical completion.Be part of critical review teams e.g. Design (30%/60%/90%), PHA / HAZOP, P&IDs, Flow Diagrams, Data Sheets, Procurement Requisitions, Vendor Data.Review and resolve day to day contractors’ claims and complaints related to assigned project work during construction and ensure HSE compliance.Fully understand contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support project manager and/or company representative in timely completion of project.Performs change order estimating and assists the Project Manager or Company representative in change order negotiations.Project Reporting and implementation of company initiatives during project execution. Review weekly and monthly reports on the status and progress of the contracts, including project costs and potential changes.Attend project meetings e.g. progress, stakeholders, design review, plot plan, value improvement.Assist in managing and reviewing the project progress i.e. planned vs actual. Review of project schedule, coordinating and monitoring the assigned project progress and challenge below par performance of the contractor.Review, coordinates and monitors invoices (claimed vs actual physical progress checks) and contractor’s submittals.Use of company systems and tools e.g. Sharek, CRM, SAP.Upholds engineering ethics and maintain high standards of professional behavior and conduct.Requirements:Engineering Design & Construction phase experience.Professionally Registered Engineer.As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized university; a higher degree is preferred.You will have Seven years of related experience, preferably in the oil industry or similar process industry.You should have experience in the support of both small and large scale capital projects.Work experience in GCC, Saudi Arabia or our client is a plus.You will be familiar with International Engineering Codes and Standards.You will have excellent English communication skills (verbal and written).Dynamic attitude towards project improvements and savings.PMP Certification is desirable but not mandatory.

Responsibilities:Design or study mechanical modification to oil and gas processing, oil and gas handling and utilities facilities. Execute capital projects according to the work scope, schedule, and budget.Responsible for project development and completion: Preliminary engineering to detail designs to construction and the final and safe turnover to proponent.Design development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Participate in HAZOP Studies, FEED review and Detailed Engineering.Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.Provide input to develop and prepare contracting plan and strategy for solicitation, evaluation, and award of contract for detail engineering, procurement, and construction.Review the project schedule, and coordinate and monitor the assigned project’s progress, and challenge below par performance of the contractor.Review and resolve day to day contractors’ claims and complaints related to the assigned project (mechanical) work during construction, and ensure HSE complianceEnsure compliance to company standards, procedures, policies, and agreed work specifications. Fully understand contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications, and project schedule, to support the project manager and/or company representative in the timely completion of project.Project Report and implementation of company initiatives during project execution.Uphold engineering ethics and maintain high standards of professional behavior and conduct.Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Lead multiple concurrent projects, each potentially with one or more support engineersDevelop and apply piping material classes based on product and project requirementsSpecify insulation, paint, and protective coatings on Piping & Instrumentation Diagrams (P&ID)Select and specify manual valves and piping specialty itemsCreate and maintain internal specifications, work instructions, and job aidsResolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Develop and implement strategies to improve project planning, cost, schedule, and/or quality.Evaluate existing tools and methodologies in your area of expertise and make recommendations on your implementation.Conduct special studies in the field of Project Management.Participate in the reviews and evaluation of the capabilities of Engineering & Construction contractors, suppliers, and project management related service providers.Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractors companies to maintenance prior to field installation.Review detailed drawings and material specification from Layout Group for piping modifications as requested.Participate in HAZOP Studies, FEED review.Requirements:As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized and approved program. A higher degree is preferred. Ideally a Professional Registered Engineer. PMP Certification is desirable but not mandatory.You will have seven years of related experience, preferably in the oil industry or similar process industry working in the engineering design and construction phase of projects.As a subject matter expert;You will have experience in the support of both small- and large-scale capital projects.You must be familiar with International Engineering Codes and Standards.You will have excellent English communication skills (verbal and written).You will have a dynamic attitude towards project improvements and savings.Experience in the GCC, Saudi Arabia, or is preferred Familiarity with standards preferred.You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software.Competencies :Plan & Organize.Analyze & Solve problems.Safety. Influence others.Communicating openly & effectively.Incorporate Technical Knowledge. Intercultural Awareness. Advanced Microsoft Excel Knowledge.

Responsibilities:Lead the development and implementation of instrumentation design strategies for capital projects, including the specification, selection, and procurement of all related equipment.Collaborate with multi-disciplinary engineering teams to ensure the integration of instrumentation and control systems with other plant components.Manage and mentor a team of instrumentation engineers and designers, setting clear goals and ensuring professional development.Sound understanding I&C Deliverables and managing the delivery for scope of work such as P&ID Development, Control System Architecture & Drawing, Instrument sizing calculations, Instrument Data sheets and Specifications for all inline and Online Instruments, Instrument Installation & Bulk Material Specification/TBE, Vendor drawing reviews, Instrument Index, I/O List, Hook-up Drawings and Installation drawings, Interface drawing/scheme of DCS & PCC/MCC, Interlock logic, terminal details, 3D Modelling (Instruments, Cable Trays, Manifolds etc.), All Layouts - Instrument Location, Junction Box, Cable Trays etc., Instrument Power consumption, Cable Schedule, JB Schedule, Panel Schedule Etc., Cable Block Diagram, JB Wiring Diagram, Instrument Wiring Diagrams, Loop Drawings, Develop Control Narratives, Cause & Effects, & Alarm Points, SIL Study & Report, Telecom & CCTV system and associated wiring, Control Panel Specifications, Layout and Drawings etc.Knowledge on AVEVA P&ID, AVEVA Instrumentation, and AVEVA Engineering modules, including the creation of datasheet formats and preparation of I/O lists, instrument lists, electrical load lists, and instrument data browsing. Ensure compliance with industry standards, safety regulations, and environmental guidelines. Conduct technical reviews, risk assessments, and validation of instrumentation designs.Manage vendor relationships to ensure the delivery of high-quality and cost-effective instrumentation solutions.Serve as the primary technical contact for instrumentation in project meetings and liaise with counterparts to understand their requirements and provide technical support.Monitor project progress, budgets, and schedules, ensuring timely and within-budget delivery of instrumentation scopes.Evaluate and implement new technologies and practices to enhance efficiency and effectiveness in instrumentation design.Requirements:Bachelor’s degree in Electrical, Electronics, or Instrumentation Engineering.Minimum of 10 years of experience in instrumentation design for chemical process plants, with at least 4 years in a leadership role.Extensive experience with AVEVA Instrumentation and AVEVA Engineering software.Strong knowledge of relevant industry standards (ISA, IEC, ANSI, API).Proficient with instrumentation design tools and software (e.g., INTOOLS, AutoCAD, MicroStation).Excellent leadership, communication, and organizational skills.Proven ability to manage and prioritize multiple projects simultaneously.Critical thinking and problem-solving skills.

Responsibilities: Creating and editing flight-related documents, such as POHs (Pilot’s operating handbook)/Flight manuals and related supplements.Generating content related to aircraft maintenance and continued airworthiness, such as AMMs (Aircraft maintenance manual), ICAs (Instructions for continued airworthiness)Generating/managing design data for end-user purposesDocumenting procedures in production and creating/writing procedure instructions using the data retrievedTranslating technical information into clear, readable documents for technical and/or nontechnical end usersWorking/cooperating with engineers to develop images, drawings, diagrams, charts and technical data needed for supplemental documentationWorking with structured and non structured tech. pub. authoring tools, photo&video editing tools and CAD tools Requirements An education in a technical/engineering fieldAn experience from aviation industry (desirable)Excellent technical writing skillsExcellent attention to details and highly methodical approach to internal workflow procedures Deadline-driven and goal-oriented mindsetAbove-average organizational skillsSuperb communication and interpersonal skillsKnowledge of Technical English or Simplified Technical EnglishThe ability to interpret and convey technical concepts quicklyA working knowledge of structured content authoring tools – XML based (desirable)Understanding of DITA/S1000D/DocBook specificationsUnderstanding of ATA 100/ATA 2200, GAMA and other general aviation-relevant specificationsExperience with Microsoft Office SuiteExperience with Adobe suite software (Indesign, Illustrator, Photoshop etc)A keen interest in aviation and anything to do with operation and service of the aircraftPossession of any pilot’s license (desirable)Any knowledge or experience related to aircraft maintenance (desirable) 

Responsibilities:  Execute capital projects according to the scope, schedule, and budget.Perform complex technical and administrative tasks relative to the Design and coordination of civil & structural packages.Provide technical input and review of the design, construction, pre-commissioning, commissioning, and startup of facilities.Address technical issues arising in all phases of the project development related to civil & structural packages of the facilities.Responsible for project development: engineering studies, technical bid reviews, preliminary engineering, detail designs, materials procurement, construction, pre-commissioning, handover, commissioning and startup.Review/provide input to the design of civil/structural packages that fully complies with our client standards and specifications.Manage GES design contractor activities during the development of Pre-FEED & FEED, including definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Stay up to date with international procedures of Projects Phases, Engineering Phases, Bidding procedures, Procurement Processes, Construction Requirements and up to date Best Practices.Have full understanding of contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to ensure timely completion of projects.Requirements:As the successful candidate you will hold a Bachelor’s degree in Civil/Structural Engineering from a recognized and approved program. An advanced degree is preferred.You will have 15 experience in years of experience in the Oil, Gas, and refining industries with a specialty in Civil & Structural Engineering, such that the incumbent is clearly recognized as an expert in this field, including at least five years of field experience including construction, pre-commissioning, commissioning, start up, and operation.

Skills

Industry

Location

Jobtitle

24 drawings Jobs found

Reliability Technician

Electrical Design Engineer

Sr Power Services Tech - AOC

Civil & Structural Engineer

ASC Civil Structural Design Engineer

Project Engineer (Process / Chemical)

Mechanical Piping Engineer

Instrumentation Lead

Technical Writer

Civil & Structural Engineer - ASC - USA

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

24 drawings Jobs found

Reliability Technician

Electrical Design Engineer

Sr Power Services Tech - AOC

Civil & Structural Engineer

ASC Civil Structural Design Engineer

Project Engineer (Process / Chemical)

Mechanical Piping Engineer

Instrumentation Lead

Technical Writer

Civil & Structural Engineer - ASC - USA

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.