Senior Manufacturing Process Development Automation Engineer - Mechanical

Senior Manufacturing Process Development Automation Engineer - Electrical & Electronics

Account Manager

Supply Planning Leader

Customer Engineer

Supplier Development Process Engineer

Finance Analyst III (Plant Operations)

Engineering Development Associate

Operations Development Associate

Production Supervisor

Responsibilities: <ul><li>Lead Automation Development for Cable Assembly Manufacturing - develop, implement, and validate cable assembly automation lines in accordance with LEANPD principles, driving productivity, quality, and manufacturing efficiency.</li><li>Drive Innovation in Automation Technologies - continuously improve existing automation methods and introduce new technologies, including robotics, machine vision, sensors, motion control, and advanced process controls to enhance capability and tolerance management.</li><li>Support Product Development and DFM - partner with Product Development teams to optimize product designs for automated manufacturing, develop proof-of-concept tooling, prototypes, and ensure successful new product introduction (NPI).</li><li>Design and Qualify Manufacturing Tooling &amp; Processes - design, develop, and validate tooling, fixtures, and automated processes that meet quality, reliability, and production requirements while driving process capability improvements.</li><li>Leverage Strong Mechanical Engineering Expertise - Apply deep knowledge of mechanical design principles, machine mechanisms, robotics integration, pneumatic and servo-actuated systems, material selection, tolerance analysis, and manufacturing processes to solve manufacturing challenges, integrate automation solutions, and assess supplier technical capabilities and compliance.</li></ul> Requirements:&nbsp;<ul><li>Bachelors Degree or higher in Mechanical Engineering, Mechanical Design Engineering, Mechatronics Engineering, Manufacturing Engineering, Automation Engineering, or a closely related discipline.&nbsp;</li><li>Strong preference for candidates with Mechanical Engineering education and hands-on experience in automation equipment design and development.&nbsp;</li><li>Minimum 7 years of experience in automation engineering, manufacturing engineering, process development, machine design, or related fields.&nbsp;</li><li>Strong knowledge of: Automated assembly equipment and manufacturing systems; mechanical design and machine mechanisms; robotics and automation integration; servo motion systems, linear motion components, and drive technologies; pneumatic and electromechanical systems; GD&amp;T, tolerance stack-up analysis, Design for Manufacturability (DFM); and automation equipment qualification</li></ul>

Responsibilities: <ul><li>Lead Automation Development for Cable Assembly Manufacturing - develop, implement, and validate cable assembly automation lines in accordance with LEANPD principles, driving productivity, quality, and manufacturing efficiency.</li><li>Drive Innovation in Automation Technologies - continuously improve existing automation methods and introduce new technologies, including robotics, machine vision, sensors, motion control, and advanced process controls to enhance capability and tolerance management.</li><li>Support Product Development and DFM - partner with Product Development teams to optimize product designs for automated manufacturing, develop proof-of-concept tooling, prototypes, and ensure successful new product introduction (NPI).</li><li>Design and Qualify Manufacturing Tooling &amp; Processes - design, develop, and validate tooling, fixtures, and automated processes that meet quality, reliability, and production requirements while driving process capability improvements.</li><li>Leverage Strong Electrical &amp; Electronics Engineering Expertise - apply deep knowledge of electrical and electronic systems, automation controls, PLCs, sensors, machine vision, and robotics to solve manufacturing challenges, integrate automation solutions, and assess supplier technical capabilities and compliance.</li></ul> Requirements:&nbsp;<ul><li>Bachelors Degree or higher in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, Automation Engineering, or a closely related discipline.</li><li>Strong preference for candidates with Electrical &amp; Electronics (E&amp;E) engineering education and hands-on automation controls experience.&nbsp;</li><li>Minimum 7 years of experience in automation engineering, manufacturing engineering, process development, or related fields.</li><li>Strong knowledge of Industrial automation systems; PLCs, motion control systems, and industrial networks; sensors, actuators, and electrical control systems; robotics and automated assembly equipment; servo systems and electrical drive technologies</li></ul>

Responsibilities: <ul><li>Manage key accounts and develop strong relationships with customer stakeholders.</li><li>Identify and pursue business development opportunities to grow revenue in the Aerospace, Defense, and Marine sectors.</li><li>Manage direct global accounts and OEM business.</li><li>Provide technical solutions to government, PSU, and defense-sector customers.</li><li>Manage customer communication and maintain regular contact with key decision-makers.</li><li>Prepare and manage quotations, proposals, offers, and project contracts.</li><li>Lead commercial discussions, pricing, and contract negotiations.</li><li>Collaborate with channel and distribution partners to support business growth.</li><li>Identify customer needs and develop solution-oriented proposals.</li><li>Generate new business opportunities and close direct sales deals.</li></ul> Requirements: <ul><li>B.Tech in Mechanical, Electrical, or Electronics Engineering.</li><li>At least 5 years of relevant experience in a customer-facing role.</li><li>Experience in key account management and business development.</li><li>Proven experience handling direct OEM business.</li><li>Demonstrated success closing direct business deals.</li><li>Experience preparing offers, quotations, proposals, and presentations.</li><li>Proficiency in Microsoft Excel and presentation tools.</li><li>Required Skills and Competencies</li><li>Strong customer relationship management skills.</li><li>Excellent communication and interpersonal skills.</li><li>Strong influencing, selling, and negotiation abilities.</li><li>Solution-oriented approach and basic problem-solving skills.</li><li>Creative approach to identifying business opportunities.</li><li>Resilience and adaptability in a changing business environment.</li><li>Ability to work effectively with customers, internal teams, and channel partners.</li></ul>

Role Description: <ul><li>Supply Planning Leader is accountable for end-to-end supply planning across an assigned product portfolio and multiple distribution centers.</li><li>The role ensures timely, cost-effective product availability while balancing customer service, inventory health, working capital, capacity, and logistics performance. This leader converts demand into feasible supply plans, manages risks and constraints, and drives cross-functional execution and continuous improvement in a global, matrix environment.</li></ul> Responsibilities: <ul><li>Develop and execute supply plans aligned with customer demand, inventory targets, business priorities, capacity, material availability, supplier constraints, and transportation lead times.</li><li>Ensure finished-goods availability and timely replenishment across distribution centers, regional warehouses, and source plants by driving MRP recommendations and monitoring plan adherence.</li><li>Lead weekly and monthly supply reviews and actively support S&amp;OP and S&amp;OE by providing supply status, reviewing demand outlook, recommending trade-offs, and driving approved actions.</li><li>Optimize safety stock, MRP policies, inventory deployment, stock coverage, turns, availability, and working capital while maintaining healthy inventory levels.</li><li>Manage phase-in and phase-out planning for the assigned portfolio.</li><li>Identify demand-supply gaps, capacity bottlenecks, material constraints, revenue risks, and service opportunities; lead root-cause analysis, recovery plans, prioritization, and allocation decisions.</li><li>Support customer-service targets, including Fill Rate, STR, OTIF, and PP Confirmation, by aligning commitments with realistic supply capabilities.</li><li>Partner with Demand Planning, Procurement, Manufacturing, Logistics, Customer Service, Product Management, and Sales on material availability, inventory strategy, supply risks, and executive reviews.</li><li>Prepare monthly and annual inventory and freight projections and improve sourcing and transportation economics, including ocean buying from source.</li></ul> Requirements: <ul><li>Bachelor’s degree in Supply Chain Management, Engineering, Operations, Business, or a related field.</li><li>10+ years of experience in supply planning, materials planning, inventory management, manufacturing, distribution, OEM, automotive, industrial, or aftermarket environments.</li><li>At least 4 years of team-leadership experience, with demonstrated stakeholder management, influencing, communication, and problem-solving capability.</li><li>Experience working effectively in fast-paced, global, matrix, and ambiguous environments.</li><li>Strong knowledge of supply and demand planning, forecasting, inventory optimization, capacity and constraint management, distribution networks, transportation, warehousing, and S&amp;OP/S&amp;OE.</li><li>Proficiency in SAP MRP and inventory planning, SAP IBP, and advanced Microsoft Excel; strong Microsoft PowerPoint and analytics capability.</li></ul>

Responsibilities: <ul><li>Install, maintain, and upgrade customer equipment&nbsp;</li><li>Apply basic diagnostic techniques to assess equipment and address technical issues, with assistance from Senior Field Service Engineers [Customer Engineers]&nbsp;</li><li>Collaborate with Senior Field Service Engineers [Customer Engineers] and/or the customer to understand roadmaps, process flows, inflection points, requirements, and&nbsp;</li><li>business challenges&nbsp;&nbsp;</li><li>Train and mentor junior Field Service Engineers [Customer Engineers]&nbsp;</li><li>Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems&nbsp;</li><li>Coordinate and communicate directly with customers&nbsp;</li><li>Fulfill additional duties, as assigned.&nbsp;</li></ul> Requirements: <ul><li>Completion of a Diploma and/or Bachelor’s degree, military technical training, field service experience, or trade certification&nbsp;</li><li>4-7 years of work experience in semiconductor industry or other equipment support industry&nbsp;</li><li>Advanced mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, and/or thermodynamics&nbsp;</li><li>Strong knowledge of hand tools and their appropriate usage, including digital multimeters&nbsp;</li><li>Effective written and verbal communication skills&nbsp;</li><li>Basic knowledge of Microsoft Excel, Word, and PowerPoint&nbsp;&nbsp;</li><li>Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.&nbsp;</li></ul>

Responsibilities: Cross function collaboration: <ul><li>Coordinate Procurement, SQE, PDE, MPDE, Engineering Assess and document manufacturing capability, process maturity, and QMS compliance during PCBA new supplier qualification/Development.</li><li>Engage upstream and downstream raw material partners to improve delivery capability, capacity alignment, and supplier responsiveness.</li><li>Organize and lead regular cross-functional reviews with PDE, MPDE, and suppliers to address delivery risks, manufacturing readiness, and improvement actions.</li><li>Track and drive closure of cross-functional and supplier action items, escalating gaps as needed.</li></ul> NPI stage: <ul><li>Provide early manufacturing and engineer support for PCBA commodities from a sourcing and supply chain perspective to support supplier selection decisions (critical).</li><li>Conflict Management: Coordinate and facilitate DFM (Design for Manufacturing) discussions with suppliers, and Engineering to ensure manufacturing requirements are clearly understood and accepted (no design decision ownership).</li><li>Assess and document manufacturing capability, process maturity, and QMS compliance during PCBA new supplier qualification.</li><li>Act as a coordination interface between Procurement and Engineering, ensuring alignment on quality, commercial, and technical expectations without assuming design ownership.</li></ul> Approved Supplier Management: <ul><li>Drive yield, process stability, and delivery performance improvements at supplier sites.</li><li>Collaborate with suppliers and key supply chain nodes to improve lead time and delivery reliability, supporting company sample and production needs.</li><li>Partner with CM and Procurement to support SRM programs for strategic PCBA suppliers, with close tracking of action plan execution.</li><li>Facilitate cross-functional supplier improvement workshops (e.g. CoPQ reduction, lead time optimization) as a neutral coordinator, ensuring clear ownership and accountability.</li><li>Monitor progress and escalate unresolved issues where action items are not closed as committed.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical / Automation/ Mechanical or any Engineering related majors.</li><li>At least 7 years of MPDE experience within PCBA (Industry relevant), connector and cable assembly Quality Management portion. Procurement, supply chain experience OR Total years of experience 10+ years in various industries including PCBA.</li><li>Knowledge on specific product and process as required (Connectors, Cable and Cable Assemblies, PCBA Tolerances and Cost Drivers)&nbsp;</li><li>In-depth knowledge of electronic manufacturing processes such as PCBA assembly (SMT/THT), box build, testing, and packaging</li><li>Understanding of supplier capabilities, capacity planning, and EMS operating models</li><li>Familiarity with DFM/DFA (Design for Assembly), component sourcing, and BOM management</li><li>Awareness of quality systems, certifications (ISO 9001,IATF 16949 and IPC- Association Connecting Electronics Industries), and related compliance standards</li><li>Ability to work with EMS partners on cost, yield, lead time, and continuous improvement</li><li>Experience supporting NPI, supplier qualification, and scale-up to mass production</li><li>Expert level with the tools related to supplier APQP process, include but not limited to PPAP, FMEA, CP, MSA, SPC, R@R and 8D methodology is a Plus.</li><li>Thorough knowledge of Problem-Solving tools (5-Why, Ishikawa/Fishbone diagrams, Fault Tree</li><li>Analysis)</li></ul>

Responsibilities: Planning and Budgeting&nbsp;: <ul><li>Assist on annual budget preparation.&nbsp;</li><li>Assist on monthly forecast preparation.&nbsp;</li><li>Track weekly forecast variance. In order to provide accurate and timely reports.&nbsp;&nbsp;</li></ul> Inventory Risk tracking/Analysis&nbsp;: <ul><li>Inventory reserve preparation&nbsp;</li><li>High light inventory risks and opportunities monthly&nbsp;</li><li>Monitor inventory physical count.&nbsp;</li><li>In order to comply with corporate policies and risk control&nbsp;&nbsp;</li></ul> Costing&nbsp;accounting&nbsp;: <ul><li>Data prepare(Mater master/Routine/Std cost);&nbsp;</li><li>Month ending JE booking&nbsp;</li><li>PPV program and analysis&nbsp;</li><li>Mat. usage analyzing&nbsp;&nbsp;</li><li>Production scrap report preparing&nbsp;&nbsp;</li></ul> FA accounting&nbsp;: <ul><li>Familiar with Capital Assets policy and comply with the policy(Include local policy)；&nbsp;</li><li>Prepare FA management report(Acquisitions, disposal, transfer etc.) and leading fixed&nbsp;</li><li>assets physical count&nbsp;</li><li>Issuing Asset Tags to assets responsible department&nbsp;</li><li>Intercompany Transfers of Fixed Assets data preparing and follow to financial posting&nbsp;</li><li>Follow Open PO&amp;IO&amp;CIP tracking report by month&nbsp;</li><li>CER review and budget control with report and management.&nbsp;</li></ul> Requirements: <ul><li>At least bachelor’s degree in finance/accounting/taxation or related.&nbsp;</li><li>Over 7-10 years working experience in Finance, costing managerial position is preferred&nbsp;&nbsp;</li><li>Good knowledge and experience in costing of manufacturing.&nbsp;Understand how to manage&nbsp;</li><li>and improve Mfg. variance.&nbsp;&nbsp;</li><li>Good knowledge and experience in SAP.&nbsp;</li><li>Fluent English Mandarin, both written and oral (Added Advantage)</li><li>Strong will to learn and develop the skills.&nbsp;</li></ul>

Role Description: <ul><li>The TS Operations &amp; Engineering Rotation Program is an accelerated development program designed for high-potential early-career professionals.</li><li>Through a series of cross-functional rotations, participants gain hands-on experience across Engineering and Operations, build broad business knowledge, and develop the skills needed for future leadership opportunities.</li><li>Your first rotation will be within our Engineering organization, where you will contribute to real business challenges, collaborate with experienced professionals, and help deliver innovative solutions for global customers.</li><li>This is not a shadowing program. From day one, you will take ownership of meaningful work, use data to solve problems, and help deliver measurable business results.</li></ul> Responsibilities: <ul><li>Contribute to engineering projects from concept through implementation and validation.</li><li>Apply data-driven problem solving to improve products, processes, and business outcomes.</li><li>Partner with cross-functional teams including Manufacturing, Quality, Operations, Supply Chain, and Project Management.</li><li>Support product development, testing, and continuous improvement activities.</li><li>Participate in customer-focused engineering initiatives to help meet performance and quality requirements.</li><li>Analyze technical challenges and recommend practical, effective solutions.</li><li>Present project results, insights, and recommendations to engineering and business stakeholders.</li></ul> Responsibilities: <ul><li>Bachelors or Masters degree in Engineering or a related technical field from a highly regarded university.</li><li>1-3 years of professional work experience in engineering, manufacturing, operations, or a related technical environment.</li><li>Strong analytical and problem-solving skills with the ability to learn quickly.</li><li>Practical experience with CAD tools in design or product development, complemented by knowledge of finite element analysis (FEA) simulation.</li><li>Knowledge of AI-enabled tools and data analytics.</li><li>Ability to work effectively in cross-functional and multicultural teams.</li><li>Strong communication skills with the ability to present ideas and recommendations clearly.</li><li>Fluent English a must</li></ul>

Responsibilities: <ul><li>Contribute to projects that improve operational performance, quality, supply chain effectiveness, and manufacturing excellence.</li><li>Analyze business data and operational metrics to identify improvement opportunities and inform decisions.</li><li>Partner with Manufacturing, Quality, Supply Chain, Engineering, and Operations teams on cross-functional initiatives.</li><li>Support initiatives focused on safety, quality, supply chain, productivity, and continuous improvement.</li><li>Participate in structured problem-solving activities and help implement sustainable solutions.</li><li>Lead or support projects that improve efficiency, optimize costs, and enhance processes.</li><li>Present recommendations, project outcomes, and key insights to operational and business leaders.</li><li>Build business, technical, and leadership capabilities through rotational assignments.</li></ul> Requirements: <ul><li>Bachelor’s or master’s degree from a highly regarded university in Engineering, Supply Chain, Operations, Manufacturing, or a related field.</li><li>1–3 years of professional experience in manufacturing, operations, supply chain, quality, engineering, or another business-related environment.</li><li>Strong analytical, problem-solving, and data-interpretation skills.</li><li>Interest in developing leadership capabilities within a global manufacturing organization.</li><li>Ability to collaborate effectively across functions, teams, and cultures.</li><li>Excellent communication skills and confidence presenting ideas and recommendations.</li><li>Fluent English required.</li></ul>

Responsibilities: <ul><li>Plan and analyze the WIP, resources and activities in ensuring line continuity.&nbsp;</li><li>Effective line management and lot movement to meet OTD.&nbsp;</li><li>Coordinate with planner in production schedule to maximize the line utilization.&nbsp;</li><li>Implement effective work methodologies to ensure consistently high-quality output and productivity.&nbsp;</li><li>Together with engineering team, effective execution of assigned WI, SOP and target.&nbsp;</li><li>Drive together with Engineers in minimizing scraps and mishandling in the line.&nbsp;</li><li>Establish cross-training plans and proper certifications and re-certifications for respective team.&nbsp;</li><li>Responsible for managing the shift manpower and achieving the turnover target.&nbsp;</li><li>Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.&nbsp;</li></ul> Requirements: <ul><li>Minimum a Diploma/Degree in Electronic or Electrical Engineering or equivalent.&nbsp;</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.&nbsp;</li><li>Strong organizational, leadership and interpersonal skills.&nbsp;</li><li>Able to multi-task, set priorities and meet deadlines.&nbsp;</li><li>Experienced with computer systems and proficient with software applications such as MS Power Point, Excel and Word.&nbsp;</li><li>Ability to perform 12 hours shift&nbsp;</li></ul>

Skills

Industry

Location

Jobtitle

184 electrical components Jobs found

Senior Manufacturing Process Development Automation Engineer - Mechanical

Senior Manufacturing Process Development Automation Engineer - Electrical & Electronics

Account Manager

Supply Planning Leader

Customer Engineer

Supplier Development Process Engineer

Finance Analyst III (Plant Operations)

Engineering Development Associate

Operations Development Associate

Production Supervisor

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

184 electrical components Jobs found

Senior Manufacturing Process Development Automation Engineer - Mechanical

Senior Manufacturing Process Development Automation Engineer - Electrical & Electronics

Account Manager

Supply Planning Leader

Customer Engineer

Supplier Development Process Engineer

Finance Analyst III (Plant Operations)

Engineering Development Associate

Operations Development Associate

Production Supervisor

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.