Electrical Project Engineer

Electrical Engineer

Senior Project Engineer Electrical (Unconventional)

Project Engineer

Head of Quality Assurance and Management Technology

Cost Engineer ( GM )

Role Description: <ul><li>The Electrical Project Engineer will primarily be responsible for the conception, design, development, and implementation of electrical systems within the constraints defined by a given contract.</li><li>The candidate should have extensive knowledge of electrical power systems, as well as AC and DC drive technology.</li><li>The candidate should also possess the ability to apply mathematical and engineering principles.&nbsp;</li><li>This role will work under the direction of the Engineering Manager.</li></ul> Responsibilities: <ul><li>Responsible for designing and developing electrical systems including: generator controls, switchboards, AC or DC drives, motor control systems, panel boards and other components required for a functioning system according to customer specification.</li><li>Ensure electrical designs conform with applicable regulatory requirements.</li><li>Create custom electrical schematics/wiring diagrams, bills of material, networking schematics, and any other items necessary for a system that conforms to customer specifications.</li><li>Communicate with customer regarding scheduling, project progress, design questions, specification questions, customer changes, new project quotations and other items that may come up during the course of a project.</li><li>Responsible for tracking contractual requirements from customers including specifications, deliveries, and other communications.</li><li>Responsible for tracking project costs and selecting components that fit within project budgets</li><li>Responsible for performing detailed electrical analysis of power systems including short circuit studies, coordination studies, load flow studies, etc.</li><li>Create both in-house and customer FAT test procedures as required by customer contract/in-house test requirements.</li><li>Perform testing in accordance with FAT and in-house test procedures when needed otherwise ensure that testing is performed per procedures.</li><li>Create field commissioning plan for equipment after leaving the facility.</li><li>Provide continued support for projects after completion and field commissioning by phone in the form of troubleshooting or in person onsite when required.</li><li>Generate work tasks, organize the ordering and delivery of equipment and materials, and facilitate the efficient assembly of the designed system.&nbsp;</li></ul> Requirements: <ul><li>Work independently as well as part of a team, managing multiple tasks and working on multiple projects simultaneously to meet challenging deadlines.</li><li>Demonstrate clear written and verbal communication skills and ability to promptly give, and follow directions when working with others.</li><li>Safely navigate the work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather).</li><li>Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Word, Excel, Power Point, etc.).</li><li>Lift and carry 50 pounds independently while walking on uneven surfaces.</li><li>Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas.</li><li>Listen for unusual noises that signify equipment and or machinery problems.</li><li>Stay alert and focused including during occasional extended work periods.</li><li>Maintain spatial orientation and awareness to safely move around work environment with many moving objects including overhead machinery.</li><li>Wear Personal Protective Equipment (PPE) at all designated times.</li><li>Ability to work on weekends and be on call after hours as needed.</li></ul> Minimum Qualifications <ul><li>Bachelor’s Degree in Electrical Engineering or similar degree with focus on Electrical Systems</li><li>2+ years of proven experience with electrical power system design.</li><li>Experience with AutoCAD Electrical.</li></ul> Preferred Qualifications&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>4+ years of proven experience with electrical power system design.</li><li>Proven experience with VFD drives and DC drives.</li><li>Proven experience with equipment used in the drilling, marine, and mining industries.</li></ul> Additional Details: <ul><li>This position requires the person to work in both office locations and outdoors in all types of weather conditions, including precipitations, cold / heat, high winder, and turbulent conditionals.</li><li>They must work with an emphasis on safety for themselves and others including coworkers and third parties.</li><li>They must be able to work closely with others and under deadlines including time-sensitive response situations.</li><li>They must be willing to work extended schedules that will include working days; and occasionally nights, weekends and holidays.</li></ul>

Responsibilities: <ul><li>You will be required to perform the following:</li><li>Prepare estimates and proposals for projects.</li><li>Apply technical standards and procedures to carry out tasks.</li><li>Ensure all techniques, procedures, and designs meet appropriate compliance standards.</li><li>Troubleshoot and solve any electrical system errors.</li><li>Provide input over the design and development of equipment designs as they progress through the structural design process.</li><li>Manage and oversee the work of Junior Electrical Engineers.</li><li>Support the manufacturing of components and resolving any manufacturing queries</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor degree in Electrical Engineering from a recognized University having proven track record in working with any reputable oil &amp; gas companies, MSc is a plus.</li><li>You will have minimum five (5) years of experience in Field Electrical Engineering.</li><li>You will have proven expertise as an electrical engineer preferably in project management field.&nbsp;</li><li>You must have deep knowledge of electrical manufacturing processes.</li><li>You will be able to demonstrate understanding of electrical engineering codes and safety standards.</li><li>Strong organizational and communication skills are required.</li><li>You will also have attention to detail.</li><li>You will have the ability to resolve project problems.</li></ul>

Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance Units to troubleshoot and fix electrical systems including reporting and documentation.</li><li>Provide expert advice and assistance to design, construction, maintenance engineers and operation personnel on all matters related to electrical systems.</li><li>Develop engineering conceptual plans for the new installation and upgrade projects including development of work scopes, calculations and detailed technical specifications.</li><li>Review Project Proposals and Detailed Designs packages for new facilities.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for Energy saving.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li><li>Regularly interact with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Electrical Engineering from an accredited university. A higher degree is preferred. A Professional Engineer (P.E.) registration is desirable but is not essential.</li><li>Minimum of 15 years working experience in Electrical engineering, with at knowledge and experience in the field of Oil and Gas Industry.</li><li>You must be conversant and have working knowledge of industry codes and standards, such as NFPA, ANSI IEEE, IEC, API, NEC, NACE and others.</li><li>Experience with specifications and data sheets for Electrical equipment like EHV GIS/AIS Switchgear, Power Transformers, large synchronous/induction motors, HV/LV Switchgears and Control gears, EHV/HV/LV Cables, Bus ducts, EHV GIBs, UPS, Battery Charger, NGR, Panel boards is a requirement.</li><li>You should also have experience in preparation of Single line diagrams, protection and metering schemes, motor schematics, Hazardous area classification drawings, substation automation architecture, synchronizing and bus changeover schemes.</li><li>Experience in electrical engineering calculations like Grounding/Earthing, Battery charger/Battery sizing, Transformer sizing, Cable sizing, Electrical Load schedules, Lighting. Also knowledge of Electrical Power system studies including Short Circuit, Load Flow analysis, Motor starting, Arc Flash Hazard studies, Relay coordination and setting using software like ETAP is essential.</li><li>You must also demonstrate the ability to work with design contractors to review contractor design packages, provide input to FEED packages, introduce new technology to enhance company productivity, suggest innovative solutions to optimize equipment performance, demonstrate safe working practices.</li><li>Be able to conduct failure analysis and provide recommendations for failed electrical equipment. Experience with electrical equipment field Installation, Commissioning and testing as well as in Electrical Equipment layouts, plant cable routing layouts, lighting and grounding layouts is preferred.</li><li>You should be able to communicate with multidiscipline engineers to complete projects.</li><li>Have proven ability to communicate effectively with strong written and oral communication skills.</li><li>You must be willing to work in remote areas depending on the project or task assignments.</li></ul>

About : <ul><li>Saudi Aramco Global Manufacturing is seeking an experienced Electrical Engineer to work under Assets Technical Solutions Department (ATSD)&nbsp;to handle electrical engineering aspects.The successful candidate should have a minimum of 15 years work experience preferably in oil and gas refining/petrochemical industries(20+ years is preferred) The candidate should be familiar with the topics of electrical safety and arc flash hazards mitigations, hazardous area classification, power generation, distribution and protection, motors and motors controls, AC/DC Systems, electrical studies and industry standards (NEC, IEC, NFPA, IEEE, NEMA, API, etc.).The electrical engineer main responsibility is to develop plans and processes to ensure facilities’ electrical equipment and systems throughout its lifecycle to reduce safety, environmental and economic risk, while maintaining compliance with all applicable codes and standards.&nbsp;The engineer will be responsible for providing technical support on major and critical electrical issues. The applicant should be a strong team player who will interface and work with multiciliary teams.&nbsp;</li></ul> Responsibilities: <ul><li>Develop and maintain lifecycle management program and database for critical electrical equipment.</li><li>Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.</li><li>Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.</li><li>Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.</li><li>Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.</li></ul> Requirements: <ul><li>Bachelor’s degree of Electrical Engineering.</li><li>Minimum 15 years of experience (20+ preferable) in refining/petrochemical industries</li><li>Experience performing electrical power system studies utilizing ETAP modeling (preferred)</li><li>Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.</li><li>Experience with specification, application and maintenance up to 15kV class electrical equipment.</li><li>Knowledge of power generation (cogeneration), power distribution and power automation (preferred).</li><li>Fluent in English, oral and written.</li></ul>

Responsibilities : As the successful candidate you will be required to perform the following:&nbsp; <ul><li>Provide expert advice and guidance in project planning, project execution, and/or project control.&nbsp;</li><li>Assist in resolving project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.&nbsp;</li><li>Work closely with project engineers and other project professionals to provide work direction and guidance. Formulate and implement strategies to improve project planning, cost, schedule, and/or quality.&nbsp;</li><li>Evaluate existing tools and methodologies in your area of expertise and make recommendations on their implementation at </li><li>Lead internal or external problem-solving teams as directed by management. Conduct training courses in your area of expertise.&nbsp;</li><li>Train and mentor developing engineers and other project management professionals. Participate in the development of standards, guidelines, instructions, policies and procedures on an as-required basis.&nbsp;</li><li>Participate in the review and evaluation of the capabilities of E&amp;C contractors, suppliers, and project management related service providers.</li></ul> Requirements: <ul><li>You must hold a Bachelor degree in Electrical/instrumentation Engineering. A higher degree would be preferred.</li><li>You should have a minimum of 15 years’ experience, including at least 6 years in your main field with an emphasis on initial engineering stages with Project Management Professional certification by AACE, PMI, or a professional engineering board is required.</li><li>You must be capable of evaluating and consulting on project problems where precedents are lacking or on problems where a high degree of specialized knowledge is required.</li><li>You should be familiar with planning and scheduling methods such as CPM and PERT, company accounting practices, project accountability budgeting and the expenditures and financials portions of the project.</li></ul>

Responsibilities: As the successful candidate, you will be required to perform the following: <ul><li>Provide expert advice and guidance in project planning, project execution, and/or project control.</li><li>Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.</li><li>Work closely with project engineers and other project professionals to provide work direction and guidance.</li><li>Develop and implement strategies to improve project planning, cost, schedule, and/or quality.</li><li>Participate in the development of standards, guidelines, instructions policies and procedures on an as-required basis.</li><li>Participate in the reviews and evaluation of the capabilities of Engineering &amp; Construction contractors, suppliers, and project management related service providers.</li></ul> Requirements: <ul><li>You must hold a Bachelor’s degree in engineering, preferably in mechanical, industrial or electrical engineer.</li><li>You should have a minimum of 10 years experience in project management events in the petroleum or related industry including direct experience with Pre-Commissioning, Commissioning, and Start-up.</li></ul>

Responsibilities: <ul><li>Management responsibility for hardware quality assurance, software quality assurance and quality control (15 employees).</li><li>Ongoing planning, maintenance, monitoring, continuous improvement and further development of quality for the Development &amp; Production departments.</li><li>Co-designing and implementing the quality objectives developed with the management system managers.</li><li>Defining and ensuring quality requirements in product development, product procurement and production (software and hardware).</li><li>Processing and analysis of material returns and support in eliminating the causes of complaints.&nbsp;</li><li>Conducting internal product/process audits and responsible for implementing improvements across the entire product life cycle.</li><li>Responsibility for issuing EU Declarations of Conformity and generating compliance verification documentation.</li><li>Participation in standards committees and ensuring the CE conformity of products.</li><li>Production support for issues relating to RoHS, REACH, SVHC, POP,PFAS, etc., as well as Conflict Minerals.</li><li>Support of the procurement department regarding supplier audits, quality and environmental contracts.</li><li>Supporting the OEM department and the subsidiary in the UK on various topics.</li><li>Responsibility for the procurement of product approvals.</li><li>Contact point for test centers and authorities. (TÜV, UL, CSA, etc.).</li></ul> Requirements: <ul><li>Completed training as an engineer specializing in electronics, mechatronics, electrical engineering or comparable training.</li><li>Additional training in EMC, electrical safety, quality assurance, environmental management.</li><li>Relevant knowledge of the current laws and standards for the abovementioned specialist areas.</li><li>Management experience in the above-mentioned disciplines is an advantage.</li><li>Project manager experience with technical responsibility for a project team</li><li>Good application knowledge of Windows, MS Office.</li><li>Strong communication and presentation skills.</li><li>High level of comprehension and analytical thinking</li><li>Resilience and stamina.</li><li>Very good knowledge of German and English. French an advantage.</li></ul>

Responsibilities: <ul><li>Provide the required technical troubleshooting and assistance to the maintenance staff in resolving power system related problems.</li><li>Provide capital project design reviews and comments for the whole project cycle (design basis scoping paper, project proposals and detailed design packages).</li><li>Perform site activities, such as field engineering, support for pre-commissioning, commissioning and startup.</li><li>Provide all technical support for all field power systems at EWPD facilities and maintain the ETAP models for all plants.</li><li>Prepare conceptual design packages and engineering budgetary cost estimates.</li><li>Develop/review power systems designs for new projects and for extensions to existing systems.</li><li>Review installation, site commissioning and factory acceptance testing for low and high voltage transformers, switchgear, circuit breakers and control gear.</li><li>Analyze the components, design parameters, installation, operation and maintenance requirements of UPS, DC and battery systems.</li><li>Advise on calculation study results and act as leader to implement recommendations. Optimize the conceptual power system design based on system studies.</li><li>Resolve power monitoring system (PMS) software problems.</li><li>Provide project specifications and demonstrate operations and maintenance requirements for transformers, switchgear, circuit breakers and control gear.</li><li>Determine the economics of cost and operation when selecting equipment.</li><li>Assess cathodic protection system.</li><li>Analyze and develop wiring and cable systems designs for new projects and for extensions to existing projects.</li><li>Serve as a technical lead role on ETAP studies, Power Monitoring System (PMS), UPS &amp; DC systems, medium &amp; low voltage Switchgears/Transformers/MCC/Cables/Motors &amp;Generators and protection system during project design and provide support during implementations.</li><li>Analyze cathodic protection surveys and provide recommendations for CP deficiencies.</li><li>Optimize the distribution of CP systems along the pipelines corridors</li><li>Assess the reliability of emergency diesel generators.</li><li>Evaluate the remote power supply and conduct economic analysis for alternative power supply for remote sites.</li><li>Assess the plant grounding and lightning protection systems.</li><li>Assess safety and instrumentation grounding systems and provide recommendations to protect instrumentation and control system against surge and lightning issues.</li></ul>&nbsp;Requirements: <ul><li>BE / BSc in Electrical Engineering.&nbsp;</li><li>Certified as PE in Power field or equivalent, certified as NACE CP (min CP Level-II)&nbsp;</li><li>Project Management Professional (PMP)&nbsp;</li><li>Experience, preferably in the Oil Industry or similar Process Industry.&nbsp;</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Role Description: <ul><li>One of the recent Textron acquisitions is writing the future of aviation by developing and delivering cutting-edge solutions, that are personalized, safe, environmentally friendly, and enable affordable ways of flying for everyone.&nbsp;</li><li>For the company, we are looking for an electrical systems and wiring engineer to become part of the team.</li><li>The R&amp;D Electrical Department plays a key role in the realization of electric air mobility projects.</li><li>As an engineer, you will be involved in the design and assembly of electrical systems for aircraft, creating and maintaining 2D and 3D documentation, and providing engineering support.&nbsp;</li></ul> Responsibilities: <ul><li>Design and assembly of the electrical systems for aircraft (Wire harness, electrical components, avionics) according to requirements,</li><li>Creating and maintaining 2D and 3D CAD documentation,</li><li>Providing engineering support to the manufacturing and prototyping department during the manufacturing and installation phase.</li></ul> Requirements: <ul><li>Degree in Mechatronics, Electrical, or other engineering discipline,</li><li>Excellent problem solving and communication skills,</li><li>Hands-on attitude,</li><li>Familiarity with aerospace electrical system,</li><li>Experience with CAD - Solidworks 2D and 3D,</li><li>Proficient in Microsoft Office products,</li><li>Fluent in English.</li></ul> Other Information: <ul><li>Permanent and full-time employment, with an evaluation period,</li><li>Flexible working hours,</li><li>Dynamic and interesting teamwork in a young team,</li><li>Working for a creative and ambitious international company,</li><li>Access to unique knowledge, aviation information and professional training resources,</li><li>Opportunities for personal and professional growth.</li></ul>

Skills

Industry

Location

Jobtitle

446 electrical project engineer Jobs found

Electrical Project Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Senior Project Engineer Electrical (Unconventional)

Project Engineer

Head of Quality Assurance and Management Technology

Electrical Engineer

Cost Engineer ( GM )

Electrical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

446 electrical project engineer Jobs found

Electrical Project Engineer

Electrical Engineer

Electrical Engineer

Electrical Engineer

Senior Project Engineer Electrical (Unconventional)

Project Engineer

Head of Quality Assurance and Management Technology

Electrical Engineer

Cost Engineer ( GM )

Electrical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.