Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

Senior Electrical Engineer

HR Business Partner IV

Operations Manager

Procurement Manager

Assembly Supervisor

Quality Engineer

Strategic Sourcing Analyst

Senior Project Manager Engineer

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Role Description: <ul><li>As a member of our ISC Global Automotive team, you will focus on enhancing our S&amp;OE process and driving the successful implementation of SAP APO PP/DS or S4 ePPDS as well as SAP IBP in our manufacturing plants.</li><li>Leveraging your extensive experience with advanced planning software, you will help define business requirements, ensure system readiness, and guide local teams through adoption and optimization processes.</li></ul> Responsibilities: <ul><li>Drive initiatives in automation and advanced planning systems to enhance and refine S&amp;OE processes.</li><li>Lead cross-functional teams - including project managers, subject matter experts, and IT partners - in defining business requirements, designing.</li><li>Provide project updates to various stakeholders at different levels of the organization.</li><li>Focus on timely project completion, resource deployment, staying within budget and appropriate adoption by end users.</li><li>Develop comprehensive training materials for end users and deliver training sessions and champion best practices and contribute to the development of standardized processes</li></ul> Requirements: <ul><li>Master’s degree or equivalent in Supply Chain, Materials Management, Business, Logistics, Engineering, or related field.</li><li>5 years’ hands-on experience in supply chain and operations, ideally manufacturing planning.&nbsp;</li><li>Extensive user-side experience in SAP APO PP/DS or S4 ePPDS implementation (essential); experience with SAP IBP Response is highly desirable.</li><li>Proven ability to use and train others on APO PP/DS and/or S4 ePPDS tools.</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures. Ensuring all tests and procedures meet company and industry standards.</li><li>Preparing test reports for management.</li></ul> Requirements: <ul><li>BS Degree in Engineering or Science, 5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li></ul>

Responsibilities: <ul><li>The ICT business unit HRBP – Plant serves as a strategic business partner and trusted thought partner to Plant Leaders and in country senior Management.</li><li>This position is located on-site, but a hybrid work schedule will also be considered Serve as the HR site leader for the Tullahoma facility, acting as a trusted advisor to site leadership and aligning HR support with key business initiatives.</li><li>Partner with the broader HR network to deliver strategic talent solutions, organizational design, and effectiveness initiatives, fostering a One HR mindset.</li><li>Provide guidance on leadership development, succession planning, and talent pipeline strategies to support long term organizational growth. </li><li>Champion diversity, engagement, and inclusion efforts, with a global mindset and focus on creating equitable access to development and information.</li><li>Coach and support managers on performance, team effectiveness, and employee development to enhance leadership capability and culture. </li><li>Lead and resolve complex employee relations matters, ensuring legal compliance and a respectful, inclusive workplace.</li><li>Design and implement talent development initiatives including stretch assignments, mentoring, and targeted training programs. </li><li>Lead HR project management efforts related to workforce transitions, organizational change, and process improvement initiatives.</li><li>Collaborate with cross-functional partners to deliver high-impact HR initiatives, ensuring clear communication, risk management, and timely execution.</li><li>Preferred: Experience supporting M&amp;A activities, including HR due diligence, integration planning, and workforce impact assessments. </li><li>Develop and manage detailed project plans for HR initiatives, including milestones, communications, and risk mitigation strategies.</li></ul> Requirements: <ul><li>Bachelor’s or Master`s degree in business, Human Resource Management, Psychology, or any related field 10+ years of progressive, international, HR related experience; breadth of HR knowledge and skills in a variety of fields in international context, including Business Partner; Experience in a manufacturing and or operations environment is strongly preferred.</li><li>Executive level and leadership experience; Experience influencing without authority.</li><li>Ability to influence, lead and drive execution into the functions/region through close partnership and collaboration with the broader HR function Proved track record in Organization Design, Change Leadership, Talent Management, and Organizational Development Ability to multi-task and work efficiently in a fast-paced, international matrix organization.</li><li>Strong project management and organizational skills Fluent English language skills Has advanced knowledge of regional labor laws and obligations and uses this knowledge to advise management, especially in conflict situations Excellent interpersonal, negotiation, and communication Ability to travel up to 10%</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Role Description: <ul><li>Reporting to the Head of Procurement, the Manager, Procurement is responsible for overseeing and managing all procurement activities within the indirect categories in the organisation. </li><li>This role encompasses the development and execution of procurement strategies, supplier management, supply chain optimization, compliance, process excellence, and end-to-end procurement life cycle management.</li></ul> Responsibilities: <ul><li>Develop and implement a comprehensive procurement strategy on indirect spend aligned with the organizations goals and objectives.</li><li>Provide strategic guidance and support to the procurement team and collaborate with senior leadership to align procurement goals with broader business objectives.</li><li>Engage with stakeholders to understand business needs, ensure that procurement policy and guidelines support the needs of the organization, and that best practice is delivered</li><li class="ql-align-justify">Develop sustainability strategy within the procurement function in collaboration with key critical vendors</li><li>Conduct industry research to identify potential suppliers and support the vendor qualification process</li><li class="ql-align-justify">Identify and eliminate waste and/or variability in the supply chain.</li><li class="ql-align-justify">Conduct due diligence on selected third-party providers to ensure quality is achieved at a reasonable cost and that transactions are legally and financially viable.</li><li class="ql-align-justify">Ensure processes and procedures are fully documented and followed. Support in audit gaps closure</li></ul> Requirements: <ul><li class="ql-align-justify">University Degree in Supply Chain and Logistics or related field</li><li class="ql-align-justify">5 years demonstrated experience in end-to-end supply chain management&nbsp;</li><li class="ql-align-justify">Professional qualification in Supply Chain and Logistics (CIPS level 5 or above)</li><li class="ql-align-justify">Knowledge of SAP ERP is an added advantage</li></ul>

Role Description: <ul><li>The position is to manage Production, Quality &amp; Delivery on time Working with ME &amp; Technician team to Implement Kaizen / Poka-Yoke technics in production line to improve productivity and quality, Push or guide operators to achieve set line targets</li></ul> Responsibilities:&nbsp; <ul><li>Maintain Shop discipline, Absenteeism, unnecessary movements of operators.</li><li>Responsible for Production, Quality &amp; Delivery on time.</li><li>Allotment of work for operators.</li><li>Ensure Material availability for present &amp; next PO.</li><li>Optimum utilization of human resources.</li><li>Overtime work recommendation/planning during production criticality.</li><li>Ensure housekeeping of M/c’s &amp; Work centres.</li><li>Ensure Material variances within specified limit.</li><li>Return of in-process &amp; by-product scrap.</li><li>Timely closure of NCAs</li></ul> Requirements&nbsp; <ul><li>Experience in BE / Diploma in mechanical Engineering.&nbsp;</li><li>Require 3+ years’ experience.&nbsp;</li><li>Hands on Experience on SAP&nbsp;</li><li>Should have knowledge on reading &amp; understanding the drawings&nbsp;&nbsp;</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: Supplier Management &amp; Development: <ul><li>Identify, evaluate, and onboard new suppliers to support business requirements.</li><li>Conduct supplier audits and performance assessments to ensure quality and reliability.</li><li>Develop and maintain strong supplier relationships to improve lead times, cost, and supply chain efficiency.&nbsp;</li></ul> Cost Management &amp; Negotiation: <ul><li>Analyze cost structures and negotiate favorable terms for materials and components.</li><li>Support cost-reduction initiatives through competitive bidding, alternative sourcing, and value engineering.</li><li>Collaborate with finance and procurement teams to optimize the sourcing budget.</li></ul> Technical &amp; Cross-Functional Collaboration: <ul><li>Work closely with engineering, R&amp;D, and manufacturing teams to define sourcing requirements.</li><li>Ensure suppliers meet technical specifications and quality standards.</li><li>Support new product development by identifying suitable suppliers for prototypes and production.&nbsp;</li></ul> Supply Chain Optimization &amp; Risk Mitigation: <ul><li>Monitor market trends and risks to ensure a stable and competitive supply chain.</li><li>Develop strategies to mitigate supplier risks related to quality, pricing, and geopolitical factors.</li><li>Optimize sourcing strategies to reduce lead times and ensure on-time delivery.</li></ul> Requirements: Required Qualifications &amp; Skills: Education &amp; Experience: <ul><li>Bachelor’s degree in mechanical engineering, Electrical Engineering, Supply Chain Management, or a related field.</li><li>5+ years of experience in sourcing, procurement, or supplier management (preferably in automotive, electronics, or manufacturing industries).</li></ul> Technical &amp; Soft Skills: <ul><li>Strong negotiation and analytical skills.</li><li>Experience in working with SAP systems and sourcing tools.</li><li>Knowledge of supplier qualification processes, cost analysis, and risk assessment.</li><li>Familiarity with engineering drawings, specifications, and manufacturing processes.</li><li>Excellent communication, stakeholder management, and problem-solving abilities.</li></ul>

Responsibilities: <ul><li>Take full ownership of one or more New Product Development (NPD) projects.</li><li>Lead core teams toward achieving common project objectives.</li><li>Manage project resources effectively to ensure projects are “staffed for success.”</li><li>Collaborate and negotiate with functional managers and the Project Approval Committee (PAC) to address and resolve resource constraints.</li><li>Ensure adherence to the defined product development process and maintain project discipline.</li><li>Keep the team focused on priorities and individual responsibilities.</li><li>Present regular project status updates to the PAC following the contract date.</li><li>Proactively identify risks and drive timely actions to maintain project momentum.</li><li>Resolve conflicts and manage controversial issues constructively.</li></ul>&nbsp;Requirements: Qualifications &amp; Experience <ul><li>Education: Bachelor’s degree required.</li><li>Experience: 5–10 years of experience in project management or a related field.</li><li>Industry Experience: Manufacturing experience is required.</li><li>Proven leadership skills in developing and managing cross-functional teams.</li><li>Demonstrated ability to create effective project plans, manage risks, and handle uncertainties.</li><li>Solid understanding of project management techniques, tools, and best practices.</li><li>Knowledge of manufacturing processes and operations.</li><li>Experience working in a matrix organization and navigating cross-functional dynamics.</li><li>Expertise in balancing time-to-market goals with quality commitments.</li><li>Strong critical thinking, problem-solving, and decision-making skills.</li><li>Excellent verbal communication skills (English proficiency required).</li><li>Certifications: Qualification in Project Management or equivalent; PMP certification preferred.</li></ul>

Skills

Industry

Location

Jobtitle

167 electricalelectronic manufacturing|consumer electronics Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

Senior Electrical Engineer

HR Business Partner IV

Operations Manager

Procurement Manager

Assembly Supervisor

Quality Engineer

Strategic Sourcing Analyst

Senior Project Manager Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

167 electricalelectronic manufacturing|consumer electronics Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

Senior Electrical Engineer

HR Business Partner IV

Operations Manager

Procurement Manager

Assembly Supervisor

Quality Engineer

Strategic Sourcing Analyst

Senior Project Manager Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.