Lead Engineer (Engineering Services)

Mechanical Engineer

Civil Materials Engineer

Workplace Experience Manager

Senior Costing Analyst

Onshore Geotechnical Engineer

Electrical Project Engineer

Fixtures Designer

Chemical Engineering (HDGP)

Responsibilities : <ul><li>Conduct analysis and design of onshore building and non-building structures using structural analysis software such as STAAD and ETABS</li><li>Perform design review of engineering packages prepared by others in support of ongoing Capital and Maintain Potential projects</li><li>Develop and interpret code and standard requirements for onshore structural designs</li><li>Assess and carry out full structural analysis, including wind/seismic/piping forces, for onshore buildings and industrial structures</li><li>Participate in Engineering Standard development and reviews</li><li>Conduct vendor technical assessments for structural steel fabricators and similar commodities</li><li>Conduct technical/structural inspections and assessments of existing structures</li><li>Support ongoing Innovation/Technology programs and strategic initiatives</li><li>Assess new and emerging technologies for civil/structural applications</li><li>Act as a professional mentor to developing structural engineers and specialists</li></ul> Requirements : <ul><li>Candidate must have a Bachelor’s Degree in Civil/Structural Engineering. Master’s Degree is a plus.</li><li>Professional Engineering or Chartered Engineering Certification</li><li>Minimum eight (8) years of professional engineering design experience in the design of onshore building and non-building structures.&nbsp;</li><li>Familiarity with AISC and ACI structural design standards</li><li>Proficient in structural engineering design software (STAAD, ETABS)</li><li>Good communication skills and be comfortable working both independently and with cross-departmental teams.</li></ul>

Responsibilities: <ul><li>Participate in refinery and petrochemical unit’s Flawless project delivery, stat up, Operation philosophy, and operation general instruction.&nbsp;&nbsp;</li><li>Provide technical support for petrochemical unit’s operation readiness, pre-commissioning&nbsp;and commissioning including start-up philosophy and spare part requirements&nbsp;</li><li>Participate in petrochemical unit’s Performance Acceptance Test (PAT), Reliability Availability Maintainability (RAM) study&nbsp;</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plants. Provides guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements</li><li>Develop coherent piping, mechanical and rotating equipment data sheet, inspection test protocols, installation procedures, technology selection, spare part philosophy and design requirements&nbsp;</li><li>Provide technical support for engineering, construction, and commissioning of the Rotating Equipment activities including design and mechanical integrity&nbsp;</li><li>Develop and implements strategies and programs to enhance plant availability and to reduce operating and maintenance costs; this includes the application of new technology</li><li>Participate in petrochemical unit’s process optimization and synergy between refinery and petrochemical</li><li>Provide piping, mechanical and rotating equipment design review, assessments, RFI’s response, scope and technology evaluation</li><li>Review and update refinery and petrochemical redline drawings&nbsp;&nbsp;</li><li>Provide technical support for capital projects involving petrochemical units at various stages of the project life cycle (pre-feasibility, feasibility, Pre-feed, feed basic design, detailed engineering and construction)</li><li>Researching new technologies, regulations, and other factors that may affect business model and reliability&nbsp;</li><li>Strong experience in Refinery-Chemicals integration strategies, competitiveness and benchmarking&nbsp;&nbsp;</li><li>Conducting research on competitors to identify opportunities for new products</li><li>Provide technical input to LP and economics modeling and capital efficiency.</li><li>Provide insights and recommendations in the financial models output and ability to guide management to select the best configurations for LTC projects cases.</li><li>Deliver the tools, templates and systems to ensure the safe, passionately and flawlessly delivery of the project.</li><li>Liaison between Project Management and technical disciplines to achieve integration across all project disciplines.&nbsp;</li><li>Ensure scope, risk and interfaces are captured, manage Interfaces between internal and external parties and documented.&nbsp;</li><li>Interface regularly with equipment vendors to resolve current problems as well as introduce and apply new technologies</li><li>Participation in all project studies such as HAZOP, SIL Study and HSSE</li><li>Liaise with site to ensure suitability of rotating equipment technical selections for maintainability and operability&nbsp;</li><li>Assist in development, implementation and ensure quality and integrating process&nbsp;</li><li>Develop maintenance philosophy spare part and material cataloging&nbsp;&nbsp;</li><li>Update, review and evaluation of equipment access and layout for maintenance purposes</li><li>Participate in and review updated Maintenance&nbsp;&nbsp;staffing plans and budget estimates</li><li>Interface with site maintenance organization to&nbsp;&nbsp;update integrated Maintenance Strategy</li><li>Develop Construction System Turnover plan for Project</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering preferred advanced degree.</li><li>At least 15 years of experience with a focus in the Refining &amp; Petrochemicals Operation.&nbsp;</li></ul>

Responsibilities :&nbsp; <ul><li>Perform review of engineering design packages prepared by others in support of ongoing Capital and Maintain Potential projects</li><li>Develop and interpret code and standard requirements for concrete and civil designs</li><li>Participate in Engineering Standard development and reviews</li><li>Conduct vendor technical assessments for manufacturers of concrete, asphalt, precast concrete and cement mortar lining and similar commodities</li><li>Conduct technical/structural inspections and assessments of existing structures.</li><li>Conduct condition assessment of existing concrete structures, infrastructure and assets.</li><li>Conduct condition assessment and failure evaluation of asphalt pavements for roads, parking and airfields.</li><li>Develop and review plans and/or scope of work for repair or rehabilitation of concrete and civil structures.</li><li>Develop and review hydrology and Storm water management plans and specifications.</li><li>Support ongoing Innovation/Technology programs and strategic initiatives</li><li>Assess new and emerging technologies for civil/structural applications</li><li>Act as a professional mentor to developing structural engineers and specialists</li></ul> Requirements :&nbsp; <ul><li>Candidate must have a Bachelor’s Degree in Civil Engineering from an accredited university. Master’s Degree is a plus.</li><li>Professional Engineering or Chartered Engineering Certification</li><li>Minimum eight (8) years of professional engineering experience</li><li>In-depth knowledge and experience in: concrete mix specifications, suitability and compliance; precast and prestressed concrete design, manufacturing and installation; concrete repair and durability; sulfur pit design and specification; specification, use and quality control of construction materials; roofing, water/weather proofing and sealing design and material specification; epoxy, grouting and adhesive materials; road design, construction and specification; asphalt pavement mix design, assessment and maintenance; Construction material testing procedures and laboratory data interpretation; hydrology and stormwater management and design principles; use of non-metallic materials in building and construction; and sustainable construction materials and methods.</li><li>Familiarity and good understanding of ACI, ASTM, ASCE, AASHTO and FAA codes and standards for concrete, pavement and civil materials</li></ul>

Responsibilities: Service Delivery &amp; Vendor Management: <ul><li>Own the IFM and Non IFM local contract(s) and manage the relationship to ensure efficient partnerships and the provision of the correct level of service and opportunities.</li><li>Lead the end-to-end delivery of WX services for all locations - including but not limited to building projects, hard services, cleaning, building services, and on-site benefits.</li><li>Lead and ensure delivery of Fleet Services.</li><li>Track service performance metrics through company recognized KPIs and methodologies and manage delivery through all third-party vendors to the agreed SLAs.</li><li>Ensure quality controls of services execution by internal staff and third party vendors.</li><li>Ensure compliance of all services with relevant norms and regulations.</li><li>Identify and highlight best practices through continuous assessment of processes.</li><li>Adapt service delivery to new ways of working and remote presence of employees on site.&nbsp;</li></ul> Project Management: <ul><li>Lead and manage all aspects of construction/refurbishment projects and capital project services for our client portfolio as well as all WX-related projects.&nbsp;</li></ul> Requirements: <ul><li>Bachelor’s degree in Business Administration, Hospitablity, Engineering or Real Estate.</li><li>5+ years of experience in multiple-vendor management.</li><li>5+ years of experience of managing service delivery.</li><li>5+ years of experience of people management.&nbsp;</li></ul>

Responsibilities : <ul><li>The Senior Costing Analyst is responsible to support new project quotations and conduct should-be-cost analysis to obtain cost saving opportunity. This role involves collaborating with various departments to gather information, analyze cost structures and identify opportunities for cost optimization besides able to adapt with fast paced work environment.</li><li>Evaluate Bill of Materials (BOM) input and review BOM assumptions.</li><li>Understand and adhere to standard costing processes to defined product target price and tooling cost</li><li>Estimate product unit cost and tooling cost to establish target prices and tooling costs for new project quotes on specified commodities.</li><li>Providing support of cost analysis during the sourcing phase/conduct should be cost (e.g., stamping, injection molding, die casting).</li><li>Work closely and collaborate with cross-functional teams to ensure target price achievement.</li><li>Review supplier quotes and cost breakdowns to support gap closure analysis.</li><li>Collaborating with team mates to evaluate and review different design-engineering and VAVE initiatives.</li><li>Provide support for critical project Engineering Change Notices (ECN) and conducting cost walk/ variance analysis.</li><li>Able to work under pressure and meet target deadlines.</li></ul> Requirements : <ul><li>Bachelor’s degree in engineering/Purchasing or other related course.</li><li>At least 5 years of working experience in Automotive/ Mechanism design/ Manufacturing/ Industry Engineering.&nbsp;</li><li>Experience in stamping, injection molding manufacturing and tooling design who expresses strong motivation to transfer to costing is an advantage.&nbsp;</li><li>Proficient communication skills with regional stakeholders. Fluent in both English and Mandarin to deal with China region.&nbsp;</li><li>Willing to work under pressure especially with flexible working time in China and Malaysia to adapt with dynamic changing market associated with Chinese OEM.</li><li>Excellent skill on Microsoft Excel, PPT, Word and experience with database management is plus</li></ul>

Role Description:&nbsp; <ul><li>Seeking for a Mechanical Engineers with hands on experience to work in Mechanical Services Shops Department / HIT &amp; Contractor Operations Division with experience in leading power generation companies (GE, Siemens, MHI, BH) and high proficiency in maintenance and operation of gas and steam turbines (heavy duty).&nbsp;</li><li>MSSD has state-of-the-art workshops and facilities that are driven by our most valuable asset, which is the department’s skilled and experienced workforce. Its primary responsibility is to maintain rotating and stationary equipment. The department plays a vital role in the company as it provides support to all field organizations by maintaining and repairing corporate equipment. Once qualified for the position you will be at the heart of one of the most advanced energy companies around the globe.</li></ul> Responsibilities:&nbsp; <ul><li>Provide consultation in all aspects of normal and emergency plant maintenance procedures and standards.</li><li>Provide technical support to maintenance and machine shop daily operation.</li><li>Support installation, maintenance and repair of rotating equipment.</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements.</li><li>Introduce the latest technology in repair methodology.</li><li>Ability to design engineering packages.</li><li>Provide coaching and knowledge sharing to Junior Engineers.</li><li>Participate in vendor and customer exchange meetings.</li><li>Participate in standards value engineering.</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering with a minimum of five years’ hands on experience in Mechanical field.</li><li>Candidate must have the following field experience requirements:</li><li>Candidate shall have strong background in the investigation of turbine malfunctions and incidents, turbine outages planning and execution, and field projects/activities management. Incumbents should know different turbine component repair processes and key quality control steps in addition to the ability to identify spare parts required for turbines, generators, and their auxiliary’s maintenance.&nbsp;</li><li>Experience in the mechanical design, troubleshooting and major repair of oil and gas rotating equipment such as Gas and Steam turbine.</li><li>Experience in manufacturing with OEM (original equipment manufacturing) facility such as, GE, Siemens, MHI, BH.</li><li>Excellent English reading and writing</li></ul>

Responsibilities:&nbsp; <ul><li>Review and revision of capital projects and introducing qualified nonmetallic products in the engineering design packages, including; water plants, gas plants, GOSPs, and terminals. Attend project review meetings in Kingdom as needed.</li><li>Strength in offering geo-intelligence solutions for mega construction, infrastructure, and natural resources.</li><li>Lead or be a team member in specialized tasks, such as incident investigation teams, special audit teams, organizational improvement teams, etc.</li><li>Conduct analysis and design of onshore geotechnical matters using geotechnical analysis software such as Plaxis, Slope W, Apile.</li><li>Develop and interpret code and standard requirements for onshore geotechnical designs.</li><li>Assess and carry out full geotechnical analysis, including bearing capacity, settlements, liquefaction, piles, soil improvement, excavation design, etc.</li><li>Develop new specifications and update existing standards, procedures and best practices. Lead value engineering sessions for onshore geotechnical and update accordingly.&nbsp;</li><li>Serve on international standards writing bodies as the opportunity allows.</li><li>Conduct Vendor technical assessments for geotechnical related matters and commodities.</li><li>Conduct technical foundations inspections and assessments of existing structures.</li><li>Support ongoing Innovation/Technology programs and strategic initiatives.</li><li>Assess new and emerging technologies for civil/geotechnical applications.</li><li>Act as a professional mentor providing training courses to develop geotechnical engineers and specialists.</li><li>Publish technical papers in refereed journals and international conferences.</li><li>Forensic engineering studies to evaluate risk of existing sinkholes situation and feasibility of optimum treatment at various cases.</li><li>Forensic engineering studies to evaluate problems in relation to settlements, slope failure, investigations, sand movement mitigations, foundations selections.</li></ul> Requirements:&nbsp; <ul><li>Candidate must have a Bachelor’s Degree in Civil/Geotechnical Engineering. Master’s Degree is a plus.</li><li>Professional Engineering or Chartered Engineering Certification.</li><li>Minimum ten (10) years of professional engineering design experience within the oil and gas industry.</li><li>Familiarity with ASTM, BS and other geotechnical design standards.</li><li>Strong consulting experience: root cause analysis, trouble shooting, problem solving.</li><li>Excellent knowledge in advance geotechnical investigation, geophysical surveys including microgravity surveys, resistivity surveys, advanced laboratory testing and soil parameter estimation.</li><li>Knowledge in International Engineering Standards and Material Specifications, including experience in participating and developing Engineering Standards for onshore geotechnical.</li><li>Good experience in the oil and gas industry. Affiliation with professional societies is highly desirable.</li><li>Good presenter, high convincing ability, good technical report and paper writing skills, and ability to mentor and teach nonmetallic courses to engineers.</li><li>Proficient in geotechnical engineering design software (Plaxis, Slope W, Apile)</li></ul>

Role Description: <ul><li>The Electrical Project Engineer will primarily be responsible for the conception, design, development, and implementation of electrical systems within the constraints defined by a given contract.</li><li>The candidate should have extensive knowledge of electrical power systems, as well as AC and DC drive technology.</li><li>The candidate should also possess the ability to apply mathematical and engineering principles.&nbsp;</li><li>This role will work under the direction of the Engineering Manager.</li></ul> Responsibilities: <ul><li>Responsible for designing and developing electrical systems including: generator controls, switchboards, AC or DC drives, motor control systems, panel boards and other components required for a functioning system according to customer specification.</li><li>Ensure electrical designs conform with applicable regulatory requirements.</li><li>Create custom electrical schematics/wiring diagrams, bills of material, networking schematics, and any other items necessary for a system that conforms to customer specifications.</li><li>Communicate with customer regarding scheduling, project progress, design questions, specification questions, customer changes, new project quotations and other items that may come up during the course of a project.</li><li>Responsible for tracking contractual requirements from customers including specifications, deliveries, and other communications.</li><li>Responsible for tracking project costs and selecting components that fit within project budgets</li><li>Responsible for performing detailed electrical analysis of power systems including short circuit studies, coordination studies, load flow studies, etc.</li><li>Create both in-house and customer FAT test procedures as required by customer contract/in-house test requirements.</li><li>Perform testing in accordance with FAT and in-house test procedures when needed otherwise ensure that testing is performed per procedures.</li><li>Create field commissioning plan for equipment after leaving the facility.</li><li>Provide continued support for projects after completion and field commissioning by phone in the form of troubleshooting or in person onsite when required.</li><li>Generate work tasks, organize the ordering and delivery of equipment and materials, and facilitate the efficient assembly of the designed system.&nbsp;</li></ul> Requirements: <ul><li>Work independently as well as part of a team, managing multiple tasks and working on multiple projects simultaneously to meet challenging deadlines.</li><li>Demonstrate clear written and verbal communication skills and ability to promptly give, and follow directions when working with others.</li><li>Safely navigate the work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather).</li><li>Proficiently use MS Office Suite to develop presentations, correspondence, reports, and schedules (Word, Excel, Power Point, etc.).</li><li>Lift and carry 50 pounds independently while walking on uneven surfaces.</li><li>Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas.</li><li>Listen for unusual noises that signify equipment and or machinery problems.</li><li>Stay alert and focused including during occasional extended work periods.</li><li>Maintain spatial orientation and awareness to safely move around work environment with many moving objects including overhead machinery.</li><li>Wear Personal Protective Equipment (PPE) at all designated times.</li><li>Ability to work on weekends and be on call after hours as needed.</li></ul> Minimum Qualifications <ul><li>Bachelor’s Degree in Electrical Engineering or similar degree with focus on Electrical Systems</li><li>2+ years of proven experience with electrical power system design.</li><li>Experience with AutoCAD Electrical.</li></ul> Preferred Qualifications&nbsp;&nbsp;&nbsp;&nbsp; <ul><li>4+ years of proven experience with electrical power system design.</li><li>Proven experience with VFD drives and DC drives.</li><li>Proven experience with equipment used in the drilling, marine, and mining industries.</li></ul> Additional Details: <ul><li>This position requires the person to work in both office locations and outdoors in all types of weather conditions, including precipitations, cold / heat, high winder, and turbulent conditionals.</li><li>They must work with an emphasis on safety for themselves and others including coworkers and third parties.</li><li>They must be able to work closely with others and under deadlines including time-sensitive response situations.</li><li>They must be willing to work extended schedules that will include working days; and occasionally nights, weekends and holidays.</li></ul>

Responsibilities: <ul><li>Design, manage mechanical facility, tooling, jig and fixture in order to sustain and improve all operational or production/assembly relevant processes.</li><li>To perform detail designs and drafting of detail drawings (parts drawings) on time with 3D software and upon the approval of the project manager in accordance to</li><li>drawings, assembly instructions &amp; PFMEA requirements, and forward the designs to the respective vendors and suppliers for quotations &amp; fabrication.</li><li>To provide engineering solution to NPI team members for new launch products, tooling, jigs &amp; fixture setup before conducting acceptance test release for mass</li><li>production.</li><li>Ensure proper setup TPM &amp; autonomous maintenance planning on mechanical devices, tools, jig &amp; fixtures with proper procurement documentation and ensure</li><li>perform the TPM according to TPM planning.</li><li>Maintain and support jig and fixture management, e.g. jig and fixture spare part management.</li><li>Support in establishing manufacturing methods, procedures, and activities with proper document (e.g. work Instruction), these includes setting of mechanical devices,</li><li>tooling, fixture setup and clamping method</li><li>Initiate and participate in continuous improvement process and 6S at work environment to increase the productivity and maintain safety, quality, cycle time</li><li>optimization and efficiency towards meeting departmental goals.</li><li>Conduct training for production staffs in workflow and the use and applications of various jig and fixture clamping techniques.</li><li>To conduct the machine/processes capability study and machine acceptance documentation.</li><li>Provide support for internal / external process audits and ensure compliance of established process requirements in the implementation of jigs and fixtures.</li><li>Support daily task given by Superior from time to time.</li></ul> Requirements: <ul><li>1-2 years relevant professional experience in mechanical designs (automation, jigs &amp; fixtures).</li><li>Prefer Bachelor degree in Mechanical &amp; Mechatronic Engineering.</li><li>Proficient in English.</li></ul>

Responsibilities You will be required to perform the following: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities</li><li>Develop, review and/or validate plant mass balances</li><li>Check plant performance to ensure it is running up to its design</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test</li><li>Evaluate the catalyst recovery performance</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation</li><li>Lead process and equipment optimization studies</li><li>Lead feasibility studies</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs</li><li>Develop implementation plan for critical recommendations</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies</li><li>Lead Energy Optimization / Conservation studies</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies</li><li>perform management of change (MOC)</li><li>verify system operations and performance after implementing the recommendations</li></ul> Requirements&nbsp; <ul><li class="ql-align-justify">As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li></ul>

Skills

Industry

Location

Jobtitle

776 engineering design experience Jobs found

Lead Engineer (Engineering Services)

Mechanical Engineer

Civil Materials Engineer

Workplace Experience Manager

Senior Costing Analyst

Mechanical Engineer

Onshore Geotechnical Engineer

Electrical Project Engineer

Fixtures Designer

Chemical Engineering (HDGP)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

776 engineering design experience Jobs found

Lead Engineer (Engineering Services)

Mechanical Engineer

Civil Materials Engineer

Workplace Experience Manager

Senior Costing Analyst

Mechanical Engineer

Onshore Geotechnical Engineer

Electrical Project Engineer

Fixtures Designer

Chemical Engineering (HDGP)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.