EMEA Field Service Power Distribution Lead Engineer- Switchgear

Warehouse Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Senior / Lead Maintenance Technician

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

Supervisor-Manufacturing Process Development Engineer

Overview: <ul><li>On-site customer work across the EMEA region (Data Centers, Utilities, Oil &amp; Gas) Remote work handling administrative and planning tasks</li><li>Candidates can be based in Ireland, the UK, Netherlands, Poland, or Romania, ideally near a major airport.</li></ul> Responsibilities: <ul><li>Lead installation, maintenance, commissioning, testing, and fault-finding of MV and HV equipment</li><li>Lead installation projects, oversee third-party providers, support fellow engineers, and ensure equipment operates at optimal performance.</li><li>Perform site testing (e.g., insulation resistance, primary/secondary injection, functional testing)</li><li>Provide advanced technical support and root cause analysis for complex power distribution fault</li><li>Review and approve service documentation, test reports, and commissioning records</li><li>Act as the primary customer contact during project execution</li><li>Support and mentor service engineers, promoting safety and best practices</li><li>Collaborate with project teams to meet delivery targets and ensure customer satisfaction</li></ul> Requirements: <ul><li>Higher Diploma or Degree in Electrical Engineering</li><li>Proven experience in power distribution testing and commissioning</li><li>Ability to test and commission large MV to HV installations</li><li>Experience with protection relay programming</li><li>Strong IT skills and attention to detail</li><li>This is a hands-on, customer-facing position suited for candidates with a strong technical background. Skills:</li><li>Strong troubleshooting and problem-solving abilities</li><li>Leadership mindset with the ability to coach and develop others</li><li>Flexibility to travel extensively across the EMEA region</li></ul>

Role Description: <ul><li>The Warehouse Technician will be responsible for executing material handling, inventory management, and warehouse operations in support of a sterile pharmaceutical manufacturing facility producing injectable IV bag products, including high potent APIs and controlled substances.</li><li>This role will ensure materials are received, stored, issued, and shipped in compliance with cGMP, DEA, and site safety requirements.</li><li>The Warehouse Technician will play a key role in maintaining accurate inventory records, supporting production schedules, and ensuring the cleanliness, organization, and security of the warehouse.</li></ul> Responsibilities: <ul><li>Receive, inspect, and verify incoming materials, components, and supplies against purchase orders and specifications.</li><li>Ensure proper storage of raw materials, packaging components, and controlled substances in compliance with cGMP, DEA, and safety requirements.</li><li>Accurately issue and deliver materials to production areas based on production schedules and work orders.</li><li>Operate warehouse equipment such as forklifts, pallet jacks, and material handling devices in a safe and compliant manner.</li><li>Perform cycle counts, physical inventory counts, and reconciliation of discrepancies in coordination with Inventory Control.</li><li>Maintain warehouse cleanliness, organization, and environmental conditions per site procedures and regulatory requirements.</li><li>Document all material transactions in the inventory management system, ensuring data accuracy and adherence to data integrity principles.</li><li>Prepare shipments of materials, components, or finished products in compliance with applicable regulations, including hazardous material handling requirements.</li><li>Support material sampling activities, including coordination with Quality Control for testing.</li><li>Assist in warehouse procedure creation, updates, and continuous improvement initiatives.</li><li>Ensure DEA security and access control measures are followed for controlled substances.</li><li>Collaborate with Production, Quality, Planning, and Procurement to ensure timely material availability for manufacturing operations.</li></ul> Requirements: Qualifications/Experience: <ul><li>High school diploma or equivalent required; Associate’s degree preferred.</li><li>Minimum of 2 years of warehouse or material handling experience in a cGMP-regulated pharmaceutical, biotechnology, or related manufacturing environment.</li><li>Experience handling controlled substances and/or high potent APIs preferred.</li><li>Knowledge of cGMP, DEA, and OSHA requirements for material handling and storage.</li><li>Experience operating forklifts and other warehouse equipment; forklift certification preferred.</li></ul> Skills/Competencies: <ul><li>Strong attention to detail and accuracy in documentation and inventory management.</li><li>Familiarity with inventory management systems and ERP software.</li><li>Ability to work effectively in a fast-paced, highly regulated environment.</li><li>Strong organizational skills with the ability to prioritize tasks.</li><li>Good communication and teamwork skills.</li><li>Commitment to safety, compliance, and maintaining a secure warehouse environment.</li><li>Ability to lift and move materials in accordance with safety guidelines.</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Responsibilities: Core / Daily Operations: <ul><li>Serve as SME for molding and cable over-molding processes</li><li>Develop, optimize, and validate manufacturing parameters and tooling</li><li>Participate in daily operations meetings to resolve process issues quickly</li><li>Ensure processes meet efficiency, quality, and output targets</li><li>Drive improvements in safety, quality, delivery, OEE, scrap, and cost using our client methodologies</li></ul> NPI &amp; Projects: <ul><li>Collaborate with Project Managers on New Product Introduction (NPI) and industrialization</li><li>Develop cost improvement roadmaps for molding, extrusion, and related technologies</li><li>Perform ROI analysis and track cost savings using our client system</li><li>Support annual cost-saving and productivity targets</li></ul> Leadership &amp; Development: <ul><li>Lead and mentor a team of 7–9 engineers/technicians</li><li>Build internal expertise in molding and related processes</li><li>Standardize processes and deliver technical training for production and NPI</li></ul> Technical &amp; Compliance: <ul><li>Support design and development of manufacturing tools and equipment</li><li>Ensure compliance with Health, Safety, and Environmental standards</li><li>Stay updated on new molding and automation technologies</li><li>Act as the regional point of contact for molding-related technical issues</li></ul>&nbsp;Requirements: Education <ul><li>Bachelor’s degree in Mechanical, Electrical, Manufacturing Engineering, or related field</li><li>Master’s degree (automation background) is a plus</li></ul> Experience <ul><li>Minimum 8+ years in manufacturing and molding processes</li><li>Strong experience in cable over-molding and extrusion</li></ul>

Responsibilities: Performance &amp; Continuous Improvement: <ul><li>Maintain and improve existing products, processes, and specifications</li><li>Drive quality improvements and cost reduction initiatives</li><li>Support product extensions to meet specific customer requirements</li></ul> Daily &amp; Ongoing Activities: <ul><li>Manage engineering change processes (ECR/ECN)</li><li>Lead Product Change Notifications (PCN) to customers</li><li>Conduct root cause analysis and implement corrective actions</li><li>Redesign products to resolve customer complaints and manufacturing challenges</li><li>Coordinate with cross-functional teams for seamless implementation</li></ul> Periodic Responsibilities; <ul><li>Support supplier development and consolidation initiatives</li><li>Participate in A3 problem-solving, Material Review Board, and Rapid Response Board</li><li>Assist manufacturing facilities with processing issues</li><li>Collaborate with product management, sales, and customer service teams</li><li>Develop and execute product testing plans</li><li>Ensure compliance with military specifications (MIL-STD)</li></ul>&nbsp;Requirements: Education <ul><li>Bachelor’s Degree in Mechanical Engineering, Mechatronics Engineering, or equivalent</li></ul> Experience &amp; Skills <ul><li>2–3 years in product engineering or packaging engineering</li></ul> Strong expertise in: <ul><li>3D Modeling (CREO / SolidWorks / Pro-E)</li><li>GD&amp;T (Geometric Dimensioning &amp; Tolerancing)</li><li>Engineering Change Management (ECR/ECN/PCN)</li><li>Lean Manufacturing &amp; Continuous Improvement</li><li>Root Cause Analysis (A3 / 8D methodologies)</li><li>Supplier Development</li><li>Microsoft Office tools</li><li>Knowledge of military specifications (MIL-STD) is a strong advantage&nbsp;</li></ul>

Position Summary: <ul><li>The Senior Maintenance Technician will lead maintenance activities in a GMP-regulated pharmaceutical manufacturing environment, ensuring reliable operation of production and facility systems.&nbsp;</li><li>This role focuses on equipment uptime, preventive maintenance, troubleshooting, and continuous improvement of utilities and process equipment—including tablet presses, granulation systems, and HVAC systems supporting cleanroom operations.</li></ul> Responsibilities: <ul><li>Perform and oversee preventive, predictive, and corrective maintenance on pharmaceutical manufacturing and facility equipment.</li><li>Lead troubleshooting and repair efforts on tablet presses, granulators, blenders, fluid bed dryers, coating machines, and other process equipment.</li><li>Maintain and repair facility utilities such as HVAC systems, compressed air, purified water, steam, chilled water, and vacuum systems.</li><li>Support calibration and mechanical integrity programs to ensure GMP compliance.</li><li>Collaborate with Production, Engineering, and Quality departments to minimize downtime and ensure regulatory requirements are met.</li><li>Review and update maintenance SOPs, work orders, and documentation in accordance with cGMP and FDA standards.</li><li>Train and mentor junior technicians and provide technical guidance during shifts or project work.</li><li>Participate in capital projects, equipment installation, and commissioning/qualification activities (IQ/OQ/PQ).</li><li>Identify and implement process improvements to increase reliability and reduce maintenance costs.</li><li>Support environmental monitoring and cleanroom operation standards through proper maintenance of HVAC and filtration systems.</li></ul> Requirements: <ul><li>Associate’s or Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering (or equivalent technical discipline) preferred.</li><li>Experience: Minimum 5–8 years in a maintenance or engineering role within a pharmaceutical, biotech, or GMP manufacturing environment.</li><li>Strong hands-on experience with tablet compression, granulation, and packaging equipment.</li><li>Working knowledge of HVAC systems, cleanroom environments, and associated regulatory requirements (ISO 14644, cGMP).</li><li>Familiarity with CMMS systems (e.g.,, BMRAM, Maximo, SAP PM) and maintenance documentation practices.</li><li>Strong understanding of electrical, mechanical, and pneumatic systems.</li><li>Excellent problem-solving, communication, and leadership skills.</li></ul> Preferred Skills: <ul><li>Knowledge of PLCs and control systems troubleshooting.</li><li>Experience with aseptic or sterile manufacturing utilities.</li><li>Understanding of 21 CFR Part 11 and data integrity principles.</li><li>Root cause analysis and reliability-centered maintenance experience. Key Responsibilities</li></ul>

Responsibilities: Automation &amp; Process Development <ul><li>Lead end-to-end development of automation systems, including concept design, hardware/software selection, prototyping, testing, validation, and full-scale implementation.</li><li>Conduct hands-on experimental trials to validate manufacturing processes and gather performance data.</li><li>Collaborate with Product Development teams to ensure designs align with automation and manufacturability standards.</li><li>Develop engineering specifications, preliminary designs, and support pre-production builds and testing.</li></ul> Process Optimization &amp; Problem Solving <ul><li>Apply data-driven methodologies such as Six Sigma, DMAIC, and 8D to identify root causes and improve process capability.</li><li>Analyze yield and process data to develop optimization strategies and enhance efficiency.</li><li>Research and implement new technologies and manufacturing techniques to improve quality and reduce costs.</li></ul> Project &amp; Stakeholder Management <ul><li>Manage multiple engineering projects simultaneously in a fast-paced environment.</li><li>Collaborate with vendors and cross-functional teams to support automation and process development initiatives.</li><li>Provide technical leadership and communicate complex concepts effectively to stakeholders.</li></ul> Documentation &amp; Innovation <ul><li>Prepare detailed technical documentation, design drawings, and process implementation requirements.</li><li>Support submission of invention disclosures for innovative concepts.</li><li>Contribute to the development and deployment of next-generation manufacturing technologies, including AI-driven solutions.</li></ul> Requirements: Education <ul><li>Bachelor’s degree in Electrical, Mechanical, Robotics, Mechatronics, or Electro-Mechanical Engineering (minimum).</li></ul> Experience <ul><li>5–7 years of experience in automation systems and manufacturing engineering.</li><li>Proven experience leading automation projects from concept to implementation.</li></ul> Technical Skills <ul><li>Automation systems: PLCs, HMIs, VFDs, servo motors, sensors, and actuators</li><li>PLC programming: Omron, Siemens, Allen-Bradley</li><li>Industrial robotics troubleshooting: KUKA, ABB, EPSON</li><li>Vision systems: Keyence, Cognex</li><li>CAD tools: Creo, SolidWorks, AutoCAD (2D &amp; 3D)</li><li>Strong electrical and electronic troubleshooting skills</li><li>Experience with Six Sigma / DMAIC / 8D methodologies</li><li>Exposure to Artificial Intelligence (preferred)</li></ul>

Responsibilities: <ul><li>Design, develop and deploy process automation workflows to support Smart Factory operation.</li><li>Extract, transform and analyze data into accurate, meaningful and actionable reports to support operational and business decision making, such as yield reports with data visualizations and recommendations.</li><li>Play a role as a bridge between business, IT and vendor(s) to support new loaders, functionalities and enhancements for Yield Management System such as Discover Yield tools, Tableau dashboards as well as Advanced Yield Examination internal tools.</li><li>With Product and Process knowledge, ensure data integrity for YMS tools.</li><li>Combine statistics, machine learning and computer science to turn data into actionable insights for solving complex process issue(s).</li><li>Design, build and maintain Predictive AI Models to enable proactive decision-making.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Computer Science or&nbsp;Electronic/Electrical Engineering, with min. 2 years’ experience in Data Analytics field.</li><li>Proficiency in SQL and experience working with relational databases.</li><li>Strong working knowledge of statistics and its applications.</li><li>Experience in building automated reports.</li></ul>

Role Description: <ul><li>Plans and establishes production work schedule to meet delivery times and best utilize company production capacity.</li><li>Initiate work orders and ensure that all products are produced to the specified specifications and ensure conformance to the schedule.</li><li>To manage the shift and all direct staff to ensure the smooth running of the production process, complying with the company’s Health and Safety procedures.</li></ul> Responsibilities:&nbsp; <ul><li>Plan, schedule, and manage production workflows to meet delivery timelines while ensuring all products conform to required specifications.</li><li>Supervise and lead shift teams, ensuring smooth production operations and strict adherence to all Health &amp; Safety guidelines within the plant.</li><li>Oversee material and production planning, including initiating work orders, maintaining inventory accuracy, and participating in stockroom and physical inventory processes.</li><li>Drive operational excellence through continuous improvement, supporting initiatives such as our client /Kaizen to enhance efficiency, quality, and overall production performance.</li></ul> Requirements: Leadership Experience:&nbsp; <ul><li>Deep understanding and professional experience of people management.</li><li>Excellent communication and convincing skills</li><li>Self-driven and detail-oriented</li><li>Desire to solve problems with analytical thinking</li><li>Good at people management and execution skills</li><li>Strong organizational skills and a team player</li></ul> Project Experience:&nbsp; <ul><li>Expert in material and production planning.</li><li>Knowledge of SAP</li><li>Quality and Environmental Management System knowledge</li><li>Excellent people management skills to develop and motivate direct reporting staff and to ensure that Health and Safety rules and regulations are adhered to during the shift in line with the companys Health and Safety policy.</li><li>Assist in maintaining stock rooms and inventory accuracy and participate in physical inventory counts.</li><li>Demonstrate customer customer-centric approach and adherence to customer expectations to promote a positive company image.</li><li>Play an active role in the our client plan/Kaizen initiative to achieve plans for future growth within the company.&nbsp;&nbsp;</li></ul> Education: <ul><li>Bachelor of Science or above degree and an engineering background.</li><li>Preferably Mechanical, Electrical/Electronics, and Industrial Engineer.&nbsp;</li></ul> Other Requirements:&nbsp; <ul><li>3-5+ years’ experience as a practitioner as an Engineer.</li><li>Knowledge in Mechanical, Electrical, and Pneumatic drawings.</li><li>Solid understanding of health and safety regulations and practices.</li><li>Strong decision-making and problem-solving skills.</li><li>Excellent communication and interpersonal skills.</li><li>Computer literate with capability in email, MS Office, and related communication tools.</li><li>Knowledge in various machines from Stamping, Molding, Plating, and Assembly.&nbsp;</li></ul>

Role Description: <ul><li>Manufacturing engineer is responsible for preparing the process sheets, tool design, establish overall strategic goals &amp; objectives of Manufacturing Engineering in alignment with organizational goals.&nbsp;</li><li>This role will be an individual contributor, which reports to MGR I MFG &amp; Process development engineer</li></ul> Responsibilities:&nbsp; <ul><li>Analyze new technology and manufacturing processes.</li><li>Plan and assess the feasibility of new and running projects.</li><li>Ensure good interfaces between Production, Production Planning, Engineering, QC and other functions.</li><li>Plan, design, and monitor manufacturing improvement processes using work study techniques. Ensure Day to day accountability &amp; support Production team to achieve targets by process improvements, training, FAI etc.&nbsp;&nbsp;</li><li>Develop new process and create all process documents like PFC, PFMEA, Control plan and SOP by understanding the depth of product requirements.&nbsp;</li><li>Vendor management, Programming, Installation, and commissioning of new Equipment’s and co-ordinate with CFT for complete process validation.&nbsp;</li><li>NPI/NPD projects execution, development and creation of all required FAI documentations and approvals.&nbsp;</li></ul> Requirements: <ul><li>BE/ B.Tech (Industrial/Electronics, Mechanical)</li><li>Minimum 7 to 9 years of industrial experience with 4 years of project management experience.</li><li>Experience in quality &amp; productivity improvement projects Experience in New product development from scratch i.e. customer order to Production handover</li></ul>

Skills

Industry

Location

Jobtitle

174 environmental engineer Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Warehouse Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Senior / Lead Maintenance Technician

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

Supervisor-Manufacturing Process Development Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

174 environmental engineer Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Warehouse Technician

Senior Product Development Engineer

Staff Manufacturing Engineer – Bulk Cable

Product Engineer II

Senior / Lead Maintenance Technician

Sr. Manufacturing & Process Development Engineer

Data Engineer, Senior

Supervisor Assembly III

Supervisor-Manufacturing Process Development Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.