Field Engineer - SR Engineer

Process Engineering

Maintenance Manufacturing Engineer

Process Engineer

Safety Engineer - Drilling Workover Operation

Reliability Engineering (HdGP)

Field Compliance Coordinator

Corrosion Engineer

ASC Maintenance Engineering Specailist

Safety Engineer (Loss Prevention) 

Responsibilities: <ul><li>Leads and recommends new continuous improvement solutions for installations or modifications to improve existing facilities and standardization within specific fields of endeavor.&nbsp;</li><li>Estimates costs, prepares justifications and completes expenditure requests as required.</li><li>Supports project execution and project proposals and initiates detailed work outline and makes decision as to basic processes, and/or equipment.&nbsp;</li><li>Performs work and or delegates work to other engineers and final development of specialized or technical proposals and studies of proposed projects.</li><li>Prepares approvals of the problem-solving report plans, schedules and provides coordination and work direction as required for the preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of project.</li><li>Formulates the basis for an engineering study or project or design in any basic or special engineering field by analyzing and evaluating all data pertinent to assignment.&nbsp;</li><li>Evaluates data as to scope, effect on existing installation, economic value, long range planning and budgetary considerations.&nbsp;</li><li>Coordinates and resolves problems with concerned entities throughout and subsidiaries and with outside of Company organizations.</li><li>Reviews work of engineers directed.&nbsp;</li><li>Checks that reports are written according to established methods of good report presentation.&nbsp;</li><li>Makes recommendations for future study or report changes.</li><li>Conducts peer-review of technical reports and reviews work of third party, technology reports, and engineering standards.</li><li>Leads the implementation and operation of all kind of recommended solutions.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor degree in Electrical Engineering from a recognized and approved program.&nbsp;</li><li>You will have minimum of 7 years of experience in Electrical Engineering</li><li>It is preferred to have Fundamental of Engineers (FE) license.</li><li>you must have a thorough knowledge of engineering practices &amp; economic principles, calculation methods, design details, US/Codes, Standards &amp; Specifications.</li><li>It is a requirement to be full professional proficiency in English language skills.</li><li>It is preferred to be full professional proficiency in Arabic language skills.</li></ul>

Responsibilities: You will be required to perform the following: <ul><li>Handle process activities such as studies and design modifications in the operating facilities</li><li>Develop simulation models for assigned operation facilities.</li><li>Develop, review and/or validate plant mass balances.</li><li>Check plant performance to ensure it is running up to its design.</li><li>Look for opportunities to optimize operations and implement them accordingly.</li><li>Use the software simulation programs such as HYSYS and promax.</li><li>Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractors</li><li>Formulate and implement long-term strategies to improve operations and reduce costs</li><li>Lead groups of engineers in the shutdown and start-up phase of existing plants.</li><li>Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.</li><li>Provide guidance on standards development through technical committee participation.</li><li>Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.</li><li>Lead unit performance and capacity tests and prepare testing procedures.</li><li>Conduct risk assessment</li><li>Conduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,</li><li>Lead performance test for static equipment e.g. column, separator etc.</li><li>Lead performance test for fired equipment and converters including catalyst performance.</li><li>Lead driers break-through test and issue test result report including desiccant replacement plan.</li><li>Lead propane refrigeration system performance test.</li><li>Evaluate the catalyst recovery performance.</li><li>Lead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly losses.</li><li>Issue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementation.</li><li>Lead process and equipment optimization studies.</li><li>Lead feasibility studies.</li><li>Lead PHA and HAZOP studies</li><li>Initiate and coordinate ESAs.</li><li>Develop implementation plan for critical recommendations.</li><li>Ensure implementation plan is executed for the system under study and propagated to other applicable systems.</li><li>Lead Health, Safety and Environmental studies.</li><li>Lead Energy Optimization / Conservation studies.</li><li>Initiate process safety relief audit studies.</li><li>Lead Water conservation studies.</li><li>perform management of change (MOC).</li><li>verify system operations and performance after implementing the recommendations.</li></ul> Requirements: <ul><li>As a successful candidate you should have a BS in Chemical Engineering with (15) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.</li><li>You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies</li></ul>

Responsibilities:&nbsp; <ul><li>Provide technical supports to spare parts manufacturing of rotating equipment including process selection, manufacturing plans and CAM programming.</li><li>Provide technical consultation to Shops Operating Repair Units and Contractor Shops.</li><li>Support field installation, maintenance and repair of rotating equipment.</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements.</li><li>Ability to prepare design engineering packages of rotating equipment.</li><li>Preform technical investigation for shop repair return jobs to identify root cause of failure, corrective repair actions and lesson learned.</li><li>Introduce the latest technology in manufacturing methodology.</li><li>Develop and revise department’s technical procedures and standards.&nbsp;</li><li>Provide coaching and knowledge sharing to junior engineers, quality inspectors and technicians.</li><li>Provide technical input for purchasing specifications including technical proposal evaluation.</li><li>Liaise with Department engineers, Consulting Services Department (CSD), other Departments and manufacturers.</li><li>Liaise with In-House Repair Units, Quality Assurance units, In-Kingdom Contractors and vendor &amp; manufacture in developing, evaluation, and implementing shop repair work scopes.</li><li>Participate in vendor and customer exchange meetings.</li></ul> Requirements:&nbsp; <ul><li>Bachelor’s Degree in Mechanical Engineering with a minimum of 20 years’ in Manufacturing field as stipulated above under position description.</li><li>Experience in the mechanical design and manufacturing of major rotating equipment such as gas compressors, steam turbine, pump, diesel engine and gearbox.</li><li>Experience on rotating equipment with original equipment manufacturing facility or equivalent certified repairing facility.</li><li>Excellent English reading and writing.</li></ul>

Role Description: <ul><li>The Unconventional Resource (UR) Operations Dept is responsible for operating all the surface facilities which include the field wells and processing facilities. Their role will be to operate the well manifolds, provide field services, maintain the facility and reduce the equipment down time, perform the PM activities, provide maintenance services in addition of providing all the technical engineering and inspection activities. Additional manpower is now required to meet the significant increase in operation activity.</li><li>They are looking to appoint a Process Engineer to lead the process design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. The candidate will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, the incumbent will have a detailed understanding of product properties, customer applications and requirements</li><li>The Process Engineer must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions</li></ul> Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipment</li><li>Develop the engineering designs packages for the new installation and upgrade projects</li><li>Review Project Proposals and Detailed Designs packages for new facilities</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I)</li><li>Update and maintain engineering documentation and drawings</li><li>Analyze system performance and find solution for Energy saving</li><li>Ensure quality, cost effective and timely solutions to any upgrade</li><li>Make recommendations for technical/economic optimization of existing facilities</li><li>Lead feasibility/profitability studies for new facilities</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provides analysis, evaluation and interpretation in support of projects, processes, and financing related to their capital investment decisions.</li><li>Maintains and expands on contacts within the industry.</li><li>Regularly interacts with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential</li><li>Minimum 15 years of working experience including knowledge in the industrial operation facility, Shale gas facility is preferred.</li><li>Also, has a good knowledge of the Modular skids mounted process unit.</li><li>Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs</li><li>Experience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software</li><li>Experience in creating schematics and piping diagrams</li><li>Conduct failure analysis and provide recommendations for failed process system, sequence of event reporting</li><li>Experience with process equipment and systems field Installation, Commissioning and testing</li><li>Experience in specifying piping and equipment layout</li></ul>

Role Description: <ul><li>We are seeking a Safety Engineer focusing on Drilling &amp; Workover Operations to join the Loss Prevention organization (LP), which is the corporate safety organization.&nbsp;</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.&nbsp;</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.&nbsp;</li><li>Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>The primary role as a Safety Engineer (Loss Prevention Engineer) is to is to provide daily support to upstream organizations to provide field and office safety support to manage safety in petroleum engineering, exploration, drilling and workover related activities, including unconventional resources and seismic operations.</li></ul> Responsibilities:&nbsp; As the successful candidate, you will have the requisite knowledge, skills, and experience to: <ul><li>Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.</li><li>Inspect to onshore and offshore drilling rigs, workover equipment, and other support facilities and have in-depth knowledge of well control equipment and procedures (i.e., attended Basic Well Control School).</li><li>Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).</li><li>Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.</li><li>Develop and/or review corporate safety standards, instructions and procedures related to upstream operations and formalize them into company-documented practices as required.</li><li>Review designs of oil and gas field facilities for compliance with company and industry safety standards.</li><li>Assist in the development of Emergency Response Plans for credible scenarios.&nbsp;</li><li>Attend emergency drills as observer and provide feedback.</li><li>Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.</li><li>Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.</li><li>Deliver Loss Prevention-specific training to employees, contractors, and outside parties.</li><li>Mentor other LP personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in any engineering discipline from an Accredited Institution, and seven years of relevant oil and gas upstream industry experience, including a strong track record in delivering results.&nbsp;&nbsp;</li><li>This would include areas such as: Drilling &amp; Workover operations; well planning and approval; reservoir management; geology and geophysics; project management for upstream facilities development; oil &amp; gas field development; simultaneous operations (SIMPOS) between upstream and construction/downstream operations; offshore and onshore drilling rig safety inspections; managerial audits/assessments; and safety program and emergency response plans development.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.</li><li>Have a working knowledge of the Incident Command System (ICS).</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities: <ul><li>Provide technical expertise to reduce repetitive failures of rotating equipment in addition of supporting plant maintenance activities implanting reliability program to improve plant performance.</li><li>Coordinates maintenance programs with user units to determine relative priorities and on-time completion of work in critical operating facilities with available work force.</li><li>Plans assigned T&amp;Is field-wide, analyses and sequences all work requests; estimates required manpower, justifying when necessary requests for additional manpower, overtime or extension of unit downtime.</li><li>Assures that all details of material and equipment are available at jobsite. On major T&amp;Is, he may direct one or more Maintenance Engineer III in accomplishing this phase of the work.</li><li>Execute the actual work during a T&amp;I period, coordinates activities of assigned craftsmen and such other personnel as are assigned (night shift coordination, etc.) to assist in the execution of the work.</li><li>Incumbent may act as the day shift coordinator on T&amp;Is or direct the activities of one or more Maintenance Engineer IIIs assigned to this phase of the work.</li><li>Report to concerned Maintenance Supervisor on quality and quantity of workmanship and adherence to standards by Maintenance Engineer III and craftsmen within his assigned areas and recommends improved work methods.</li><li>Reports on deviation from approved schedules and assists in the correction of such deviations</li><li>Review Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Coordinate maintenance work between Maintenance Divisions when services from various divisions are required.</li><li>Perform special assignments as directed, utilizing his engineering knowledge and experience. </li><li>Such assignments may include work direction to one or more Maintenance Engineer IIIs.</li><li>Application of Maintenance Engineer when specializing in Digital Maintenance Engineering Performs engineering analysis of real time, process control digital systems in central operations facilities to aid in fault diagnosis. Evaluates</li><li>Maintenance activity on digital systems.</li><li>Provides professional level expertise to the solution of complex hardware problems.&nbsp;</li><li>Responsible, under the general direction of Superintendent in assigned Maintenance Division and with work direction from maintenance.</li></ul> Requirements: <ul><li>The successful candidate should hold a minimum of Bachelor Degree in Mechanical Engineering. Fifteen (15) years of experience in Oil &amp; Gas or Petrochemical Industry.</li><li>In addition, the candidate should be certified Maintenance &amp; Reliability Professional (CMRP) and TapRooT Analyst.</li><li>Also, the candidate should be good spoken and written of English language.</li></ul>

Responsibilities: <ul><li>Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li>Identify and evaluate hazardous conditions and practices in the workplace. Conduct surveys to identify and evaluate occupational health, safety and environmental conditions. </li><li>Conduct and coordinate on-site inspections to audit physical conditions and safe work practices. </li><li>Provide advice and counsel concerning compliance with corporate safety regulations and procedures.</li><li>Perform construction site and/or area safety inspections of department facilities and operations. </li><li>Perform job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.</li><li>Develop controls for identified hazards. </li><li>Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.</li><li> Identify and evaluate hazardous conditions and practices in the workplace. Conduct surveys to identify and evaluate occupational health, safety and environmental conditions. </li><li>Conduct and coordinate on-site inspections to audit physical conditions and safe work practices. </li><li>Provide advice and counsel concerning compliance with corporate safety regulations and procedures.</li><li>Perform construction site and/or area safety inspections of department facilities and operations. </li><li>Perform job site safety compliance inspections, including hazard analyses and safe work procedures, and prepare written reports and recommendations.</li><li>Develop controls for identified hazards. </li><li> Coordinate the implementation of controls from the results of hazard analyses. </li><li> Measure and evaluate the effectiveness of the hazard control system, policies, and procedures and recommend changes that reflect improved opportunities to eliminate work place incidents and injuries.</li><li>Prepare safety orientations, safety training and job site inspection procedures. Direct or assist in the development of specialized education and training materials. Conduct specialized safety and environmental training programs to communicate hazard control information. </li><li>Assist local management in new employee occupational health, safety and environmental orientation.</li><li> Participate in Safe Operations Committee meetings.</li><li> Review and analyze injury, property damage, and statistical loss data and work with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.</li><li>Incorporate essential safety requirements in all purchasing and contracting actions. </li><li> Recommend the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.</li><li> Maintain awareness of corporate safety and environmental requirements and make recommendations for their implementation.</li><li> Assist management with monitoring adherence to department safety and environmental programs by employees and contractors.</li></ul> Requirements: <ul><li>As the successful candidate you will have a bachelor’s degree in engineering, safety engineering, industrial hygiene, environmental science or a related field.</li><li>You will have nine years of related safety/operational experience and/or training, preferably in the oil/gas or petrochemical industry, or in power distribution.</li><li>You must have knowledge or training in occupational health, safety and environmental compliance within power systems.</li></ul>

Responsibilities: <ul><li>Provide expert advice and assistance to the UR, outside vendors, manufacturers, and design firms on corrosion engineering matters.</li><li>Originate and carry out engineering studies to determine potential problems and remedies to existing problems, resolve complex technical problems.</li><li>Generate and monitor corrosion monitoring programs and corrosion monitoring devices (coupons/probes).</li><li>Review and monitor pipeline corrosion management (scraping/ILI).</li><li>Inspect installations in factories and in the field and participate on the testing &amp; commissioning of new facilities and Turnaround and Inspection (T&amp;I).</li><li>Investigate and analyze failures in operational facilities and provide remedial actions.</li><li>Review and monitor cathodic protection (CP) performance.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Evaluate and introduce best practices and new technologies from all over the world to help the UR to achieve best in class positions.</li><li>Work on or with task forces assigned to investigate incidents or solve specific problems.&nbsp;</li><li>Perform cost analyses and value engineering studies as appropriate.&nbsp;</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Conduct seminars in the resolution of technical problems with personnel in other engineering organizations.&nbsp;</li><li>Write papers for peer-reviewed journals on engineering studies and projects the candidate has overseen.</li></ul> Requirements:&nbsp; <ul><li>A bachelor’s degree in engineering.&nbsp;</li><li>A master’s degree or a Ph.D. in corrosion engineering is highly desirable as well as a Professional Engineer (P.E.) license, NACE and API certifications.</li><li>Minimum 15 years of professional experience in the field of corrosion engineering, including experience as an engineer in charge of technical work in corrosion engineering.&nbsp;</li><li>Experience working with unconventional resources would be an advantage.</li><li>You will have achieved industry recognition through activities in professional societies and industrial organizations, such as ASME, ASCE, ASTM, API, NACE, SEI, and others.</li><li>As the successful candidate you will be expected to work in remote areas depending on the project you are assigned to.</li></ul>

Responsibilities: You are expected to be able to perform the following: <ul><li>Develop maintenance processes, maintenance management strategy, work and performance management strategy and conduct Maintenance health assessment in line with GME and corporate requirements. This includes PM and PdM strategies, Org. structures, manpower analysis, cost analysis, etc., and appraise and prepare reports on the effectiveness of such processes.</li><li>Conduct data driven analyses to benchmark maintenance organization’s performance to identify gaps then set sustainable plan to close the gaps, this includes, but not limited to: Spending Analysis, Maintenance Effectiveness, operating costs of existing assets, PM, and PdM, Wrench time analysis, SAP Taxonomy, Planning &amp; Scheduling, Personnel Competency, Budgeting Strategy, Bad Actors, and RAM Modeling.&nbsp;</li><li>Analyze facilities’ maintenance performance to establish reference baseline &amp; Issue frequent maintenance benchmarking reports to promote knowledge.</li><li>Review maintenance reporting mechanism and KPIs along with their trends to drive performance and provide recommendations accordingly.</li><li>Analyze maintenance spending in terms of manpower, equipment, materials procurement and outsource strategies.</li><li>Assist the line maintenance organizations in the implementation of approved programs such as TPRM or GM reliability model.</li><li>Develop methods and programs for handling new situations in maintenance fields. This will include prototype pumps, motors, compressors, turbines, valves, instrument systems and computer systems.</li><li>Design, in conjunction with engineering personnel and vendor representatives, alternative parts or systems.</li><li>Represent AMSD on standing Committees, Special Task Groups or Ad Hoc Committees.</li><li>Recommend work which can be economically assigned to contractor organizations and develops scope of work.</li><li>Report to concerned Maintenance Supervisor &amp; Manager on quality and quantity of workmanship and adherence to standards within his assigned areas and recommends improved work methods.</li><li>Ensure that periodic maintenance is performed in accordance with vendor recommendations and Companys procedures and that maintenance logs and records are maintained.&nbsp;</li><li>Reviews Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Prepare Engineering Reports on maintenance activities/methods and means for their improvement.&nbsp;</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Engineering from a recognized and approved program. </li><li>A Mechanical Engineering Degree is preferred.</li><li>You will have a minimum of ten years of relevant experience in the Oil &amp; Gas downstream Sector.</li><li>You will be able to demonstrate high degree of technical competence in the area of maintenance programs and practices.</li><li>You will have experience with risk-based processes such as Reliability-Centered Maintenance &amp; Risk Based Maintenance</li><li>You will have experience with TotalProductive Maintenance</li><li>You must have strong hands-on experience with Spare Parts and Materials procurement strategies</li><li>You will have Best-in-class Maintenance Planning, Scheduling and Work Prioritization experience</li><li>You must have strong Experience with Maintenance budgeting and spending control methodologies.</li><li>You will have Experience in field maintenance methodologies, processes, and procedures.</li><li>You will be able to demonstrate strong interpersonal &amp; communication skills.</li><li>You will be able to demonstrate strong analytical &amp; problem-solving skills</li><li>You will be able to demonstrate experience with CMMS such as SAP</li><li>Conversant with MS Office applications</li><li>You will be able to demonstrate ability to work under pressure and meet deadlines</li><li>You will be able to demonstrate fluency in spoken and written English</li></ul>

Role Description: <ul><li>We are seeking a Safety Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.</li><li>Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Safety Engineer (Loss Prevention Engineer) is to provide daily support to company facilities and departments, helping them effectively implement the Safety Management System (Occupational &amp; Process Safety) expectations and associated programs, as well as assuring compliance to all company safety requirements.&nbsp;&nbsp;</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.</li><li>Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.</li><li>Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).</li><li>Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.</li><li>Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.</li><li>Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).</li><li>Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.</li><li>Deliver Loss Prevention-specific training to employees, contractors, and outside parties.</li><li>Mentor other Loss Prevention personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a Bachelor degree in Engineering or Engineering Technology from an Accredited Institution, and seven years of experience as a safety professional in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results.</li><li>The experience should be comprehensive, covering both occupational and process safety.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management, and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>At our client, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.&nbsp;</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.&nbsp;</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Skills

Industry

Location

Jobtitle

431 field engineer Jobs found

Field Engineer - SR Engineer

Process Engineering

Maintenance Manufacturing Engineer

Process Engineer

Safety Engineer - Drilling Workover Operation

Reliability Engineering (HdGP)

Field Compliance Coordinator

Corrosion Engineer

ASC Maintenance Engineering Specailist

Safety Engineer (Loss Prevention)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

431 field engineer Jobs found

Field Engineer - SR Engineer

Process Engineering

Maintenance Manufacturing Engineer

Process Engineer

Safety Engineer - Drilling Workover Operation

Reliability Engineering (HdGP)

Field Compliance Coordinator

Corrosion Engineer

ASC Maintenance Engineering Specailist

Safety Engineer (Loss Prevention)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.