Field Engineer - SR Engineer

Reliability Engineering (HdGP)

Process Engineer

Estimator

Safety Engineer - Drilling Workover Operation

Safety Engineer (Loss Prevention) 

Cost Engineer ( GM )

Corrosion Engineer

ASC Cost Engineer

Chemical Engineer

Responsibilities: <ul><li>Leads and recommends new continuous improvement solutions for installations or modifications to improve existing facilities and standardization within specific fields of endeavor.&nbsp;</li><li>Estimates costs, prepares justifications and completes expenditure requests as required.</li><li>Supports project execution and project proposals and initiates detailed work outline and makes decision as to basic processes, and/or equipment.&nbsp;</li><li>Performs work and or delegates work to other engineers and final development of specialized or technical proposals and studies of proposed projects.</li><li>Prepares approvals of the problem-solving report plans, schedules and provides coordination and work direction as required for the preparation of designs, processes, reports, correspondence and related data and assures the efficiency, adequacy and conformance to overall objectives of project.</li><li>Formulates the basis for an engineering study or project or design in any basic or special engineering field by analyzing and evaluating all data pertinent to assignment.&nbsp;</li><li>Evaluates data as to scope, effect on existing installation, economic value, long range planning and budgetary considerations.&nbsp;</li><li>Coordinates and resolves problems with concerned entities throughout and subsidiaries and with outside of Company organizations.</li><li>Reviews work of engineers directed.&nbsp;</li><li>Checks that reports are written according to established methods of good report presentation.&nbsp;</li><li>Makes recommendations for future study or report changes.</li><li>Conducts peer-review of technical reports and reviews work of third party, technology reports, and engineering standards.</li><li>Leads the implementation and operation of all kind of recommended solutions.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor degree in Electrical Engineering from a recognized and approved program.&nbsp;</li><li>You will have minimum of 7 years of experience in Electrical Engineering</li><li>It is preferred to have Fundamental of Engineers (FE) license.</li><li>you must have a thorough knowledge of engineering practices &amp; economic principles, calculation methods, design details, US/Codes, Standards &amp; Specifications.</li><li>It is a requirement to be full professional proficiency in English language skills.</li><li>It is preferred to be full professional proficiency in Arabic language skills.</li></ul>

Responsibilities: <ul><li>Provide technical expertise to reduce repetitive failures of rotating equipment in addition of supporting plant maintenance activities implanting reliability program to improve plant performance.</li><li>Coordinates maintenance programs with user units to determine relative priorities and on-time completion of work in critical operating facilities with available work force.</li><li>Plans assigned T&amp;Is field-wide, analyses and sequences all work requests; estimates required manpower, justifying when necessary requests for additional manpower, overtime or extension of unit downtime.</li><li>Assures that all details of material and equipment are available at jobsite. On major T&amp;Is, he may direct one or more Maintenance Engineer III in accomplishing this phase of the work.</li><li>Execute the actual work during a T&amp;I period, coordinates activities of assigned craftsmen and such other personnel as are assigned (night shift coordination, etc.) to assist in the execution of the work.</li><li>Incumbent may act as the day shift coordinator on T&amp;Is or direct the activities of one or more Maintenance Engineer IIIs assigned to this phase of the work.</li><li>Report to concerned Maintenance Supervisor on quality and quantity of workmanship and adherence to standards by Maintenance Engineer III and craftsmen within his assigned areas and recommends improved work methods.</li><li>Reports on deviation from approved schedules and assists in the correction of such deviations</li><li>Review Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Coordinate maintenance work between Maintenance Divisions when services from various divisions are required.</li><li>Perform special assignments as directed, utilizing his engineering knowledge and experience. </li><li>Such assignments may include work direction to one or more Maintenance Engineer IIIs.</li><li>Application of Maintenance Engineer when specializing in Digital Maintenance Engineering Performs engineering analysis of real time, process control digital systems in central operations facilities to aid in fault diagnosis. Evaluates</li><li>Maintenance activity on digital systems.</li><li>Provides professional level expertise to the solution of complex hardware problems.&nbsp;</li><li>Responsible, under the general direction of Superintendent in assigned Maintenance Division and with work direction from maintenance.</li></ul> Requirements: <ul><li>The successful candidate should hold a minimum of Bachelor Degree in Mechanical Engineering. Fifteen (15) years of experience in Oil &amp; Gas or Petrochemical Industry.</li><li>In addition, the candidate should be certified Maintenance &amp; Reliability Professional (CMRP) and TapRooT Analyst.</li><li>Also, the candidate should be good spoken and written of English language.</li></ul>

Role Description: <ul><li>The Unconventional Resource (UR) Operations Dept is responsible for operating all the surface facilities which include the field wells and processing facilities. Their role will be to operate the well manifolds, provide field services, maintain the facility and reduce the equipment down time, perform the PM activities, provide maintenance services in addition of providing all the technical engineering and inspection activities. Additional manpower is now required to meet the significant increase in operation activity.</li><li>They are looking to appoint a Process Engineer to lead the process design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities. The candidate will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities. In addition, the incumbent will have a detailed understanding of product properties, customer applications and requirements</li><li>The Process Engineer must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions</li></ul> Responsibilities: <ul><li>Provide day-to-day technical support to the Operation and Maintenance to troubleshoot and fix process equipment</li><li>Develop the engineering designs packages for the new installation and upgrade projects</li><li>Review Project Proposals and Detailed Designs packages for new facilities</li><li>Participate on the testing &amp; commissioning of the new facilities and Turnaround and Inspection (T&amp;I)</li><li>Update and maintain engineering documentation and drawings</li><li>Analyze system performance and find solution for Energy saving</li><li>Ensure quality, cost effective and timely solutions to any upgrade</li><li>Make recommendations for technical/economic optimization of existing facilities</li><li>Lead feasibility/profitability studies for new facilities</li><li>Assists in the training, development and mentoring of younger staff.</li><li>Provides analysis, evaluation and interpretation in support of projects, processes, and financing related to their capital investment decisions.</li><li>Maintains and expands on contacts within the industry.</li><li>Regularly interacts with other professionals in various company organizations involved in capital planning and economic analysis.</li></ul> Requirements: <ul><li>Bachelors Degree in Chemical Engineering, MS is preferred. A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential</li><li>Minimum 15 years of working experience including knowledge in the industrial operation facility, Shale gas facility is preferred.</li><li>Also, has a good knowledge of the Modular skids mounted process unit.</li><li>Detailed knowledge of industry standards and procedures such as API and ASMI codes is required to support the review of company standards, project reviews, and implementation of plant modifications to process systems.</li><li>Experience with creating/modifying PFDs, and P&amp;IDs</li><li>Experience with troubleshooting process equipment and systems failures, including pumps, compressors, pipe line/piping, and dehydration systems.</li><li>Knowledge of HYSIS and other process simulation software</li><li>Experience in creating schematics and piping diagrams</li><li>Conduct failure analysis and provide recommendations for failed process system, sequence of event reporting</li><li>Experience with process equipment and systems field Installation, Commissioning and testing</li><li>Experience in specifying piping and equipment layout</li></ul>

KEY RESPONSIBILITIES: Project Estimation <ul><li>Analysing project specifications and requirements to identify all necessary cost components. </li><li>Visit the site, review the project scope, drawings &amp; specification to develop the cost estimate for the projects through different estimate classes as per the estimate guideline.</li><li>Liaise with project engineer and other project stakeholders to convert specifications/quantities to cost estimates for projects.</li><li>Assist to build the price schedule for contracting process.</li><li>Review the engineering and construction service proposals and validate the proposals alignment with original project scope.</li><li>Assist with bid analysis and contract negotiations whenever is applicable.</li><li>Collaborating with vendors, suppliers, and subcontractors through commercial department to obtain quotes and pricing information.</li><li>Collaborating with project engineers and projects stakeholders to develop and adjust budgets based on cost estimates. Estimate Control &amp; Cost Analysis  Monitoring and updating cost estimates through all project phases and propose corrective actions if necessary.</li><li>Analyse the cost of projects by comparing the original estimate and the actual cost through all project phases and provide a regular detailed variance report by cost elements.</li><li>Control and monitor any of projects’ expenses and plan for unforeseen costs that may arise.</li><li>Collect the cost details for completed projects, analyse the projects actual Vs estimate, compile the analysis for evaluation and create a lesson learned log sheet for all variations.</li></ul> REQUIREMENTS: <ul><li>Required (Qualification1 / Discipline): Bachelor’s Degree in Engineering (any discipline)</li><li>Preferred (Qualification1 / Discipline): Bachelor’s Degree in Engineering (Mechanical/Civil)</li><li>Experience Required (Years2 / Job Level3 / Industry): 5-7 years of experience as Estimation Engineer in the Petrochemical or Oil &amp; Gas Industry. Must have 5-7 years of experience in brown field projects cost estimation.</li><li>Preferred (Years2 / Job Level3 / Industry): 7+ years of experience as Estimation Engineer in the Petrochemicals Industry.</li></ul> Other Job Specific Requirements and/or Vocational Accreditations <ul><li>Hands on experience on costing tools/software</li><li>Certificate of Cost Professional (CCP) is preferred</li><li>3rd party certification (e.g., PMP, PMI, APM etc.)</li><li>Advanced user of MS excels and other MS tools.</li></ul>

Role Description: <ul><li>We are seeking a Safety Engineer focusing on Drilling &amp; Workover Operations to join the Loss Prevention organization (LP), which is the corporate safety organization.&nbsp;</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.&nbsp;</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.&nbsp;</li><li>Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>The primary role as a Safety Engineer (Loss Prevention Engineer) is to is to provide daily support to upstream organizations to provide field and office safety support to manage safety in petroleum engineering, exploration, drilling and workover related activities, including unconventional resources and seismic operations.</li></ul> Responsibilities:&nbsp; As the successful candidate, you will have the requisite knowledge, skills, and experience to: <ul><li>Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.</li><li>Inspect to onshore and offshore drilling rigs, workover equipment, and other support facilities and have in-depth knowledge of well control equipment and procedures (i.e., attended Basic Well Control School).</li><li>Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).</li><li>Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.</li><li>Develop and/or review corporate safety standards, instructions and procedures related to upstream operations and formalize them into company-documented practices as required.</li><li>Review designs of oil and gas field facilities for compliance with company and industry safety standards.</li><li>Assist in the development of Emergency Response Plans for credible scenarios.&nbsp;</li><li>Attend emergency drills as observer and provide feedback.</li><li>Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.</li><li>Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.</li><li>Deliver Loss Prevention-specific training to employees, contractors, and outside parties.</li><li>Mentor other LP personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a bachelors degree in any engineering discipline from an Accredited Institution, and seven years of relevant oil and gas upstream industry experience, including a strong track record in delivering results.&nbsp;&nbsp;</li><li>This would include areas such as: Drilling &amp; Workover operations; well planning and approval; reservoir management; geology and geophysics; project management for upstream facilities development; oil &amp; gas field development; simultaneous operations (SIMPOS) between upstream and construction/downstream operations; offshore and onshore drilling rig safety inspections; managerial audits/assessments; and safety program and emergency response plans development.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management and be able to produce clear and concise oral and written reports in English.</li><li>Have a working knowledge of the Incident Command System (ICS).</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>Our people work on truly world-scale projects, supported by investment in capital and technology that is second to none. And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades. Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Role Description: <ul><li>We are seeking a Safety Engineer to join the Loss Prevention organization (LP), which is the corporate safety organization.</li><li>We provide both day-to-day in-field occupational and process safety support to operations, as well as centralized technical support and consulting function.</li><li>Our field offices are located in Abqaiq, Riyadh, Ras Tanura, Dhahran, Udhailiyah, Jeddah (including Yanbu and Jazan), and Tanajib.</li><li>Through these offices, LP provides its services to all facilities and departments that are located throughout the Kingdom.</li><li>Your primary role as a Safety Engineer (Loss Prevention Engineer) is to provide daily support to company facilities and departments, helping them effectively implement the Safety Management System (Occupational &amp; Process Safety) expectations and associated programs, as well as assuring compliance to all company safety requirements.&nbsp;&nbsp;</li></ul> Responsibilities: <ul><li>As the successful candidate, you will have the requisite knowledge, skills, and experience to:</li><li>Facilitate implementation of the Safety Management System, as well as its objectives and expectations, including developing associated safety processes, and participating in self-assessments.</li><li>Conduct field inspections/reviews to assess compliance to company and international codes and standards, identify safety concerns, formulate solutions, and develop practical and cost-effective corrective actions.</li><li>Identify, evaluate, recommend actions, and follow up on critical, yet universal safety tasks and control methodologies related to operational safety practices (e.g., work at height, isolation/LOTO, permit to work, hydrogen sulfide, confined space entry, excavations).</li><li>Participate in safety studies/activities using risk assessment and mitigation methodologies, such as: PHAs, HAZOPs, JSAs, incident investigations, compliance reviews, or insurance surveys.</li><li>Respond to emergency situations and incidents, either during or after regular working hours, to provide technical assistance and advice.</li><li>Participate in worksite contractor safety management activities (e.g., contractor selection and prequalification, monitoring of work site compliance, and measurement of performance).</li><li>Support the reporting, classification and investigation all incidents, and participating in incident investigations, determination of root causes, and proper recommendations to prevent recurrence.</li><li>Deliver Loss Prevention-specific training to employees, contractors, and outside parties.</li><li>Mentor other Loss Prevention personnel.</li></ul> Requirements: <ul><li>As the successful candidate, you will hold a Bachelor degree in Engineering or Engineering Technology from an Accredited Institution, and seven years of experience as a safety professional in the oil and gas, petrochemicals, or related industries, including a strong track record in delivering results.</li><li>The experience should be comprehensive, covering both occupational and process safety.</li><li>You will have an excellent ability to communicate in English with peers as well as members of management, and be able to produce clear and concise oral and written reports in English.</li></ul> Working Environment: <ul><li>Our high-performing employees are drawn by the challenging and rewarding professional, technical and industrial opportunities we offer, and are remunerated accordingly.</li><li>At our client, our people work on truly world-scale projects, supported by investment in capital and technology that is second to none.&nbsp;</li><li>And because, as a global energy company, we are faced with addressing some of the world’s biggest technical, logistical and environmental challenges, we invest heavily in talent development.</li><li>We have a proud history of educating and training our workforce over many decades.&nbsp;</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through our workforce development programs – one of the largest in the world.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: <ul><li>Provide expert advice and assistance to the UR, outside vendors, manufacturers, and design firms on corrosion engineering matters.</li><li>Originate and carry out engineering studies to determine potential problems and remedies to existing problems, resolve complex technical problems.</li><li>Generate and monitor corrosion monitoring programs and corrosion monitoring devices (coupons/probes).</li><li>Review and monitor pipeline corrosion management (scraping/ILI).</li><li>Inspect installations in factories and in the field and participate on the testing &amp; commissioning of new facilities and Turnaround and Inspection (T&amp;I).</li><li>Investigate and analyze failures in operational facilities and provide remedial actions.</li><li>Review and monitor cathodic protection (CP) performance.</li><li>Develop and maintain the UR engineering standards and design best practices.</li><li>Evaluate and introduce best practices and new technologies from all over the world to help the UR to achieve best in class positions.</li><li>Work on or with task forces assigned to investigate incidents or solve specific problems.&nbsp;</li><li>Perform cost analyses and value engineering studies as appropriate.&nbsp;</li><li>Undertake special assignments requiring extensive technical experience and discretion when dealing with outside organizations.</li><li>Conduct seminars in the resolution of technical problems with personnel in other engineering organizations.&nbsp;</li><li>Write papers for peer-reviewed journals on engineering studies and projects the candidate has overseen.</li></ul> Requirements:&nbsp; <ul><li>A bachelor’s degree in engineering.&nbsp;</li><li>A master’s degree or a Ph.D. in corrosion engineering is highly desirable as well as a Professional Engineer (P.E.) license, NACE and API certifications.</li><li>Minimum 15 years of professional experience in the field of corrosion engineering, including experience as an engineer in charge of technical work in corrosion engineering.&nbsp;</li><li>Experience working with unconventional resources would be an advantage.</li><li>You will have achieved industry recognition through activities in professional societies and industrial organizations, such as ASME, ASCE, ASTM, API, NACE, SEI, and others.</li><li>As the successful candidate you will be expected to work in remote areas depending on the project you are assigned to.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: <ul><li>Perform process troubleshooting and address chronic operational problems</li><li>Conduct optimization of processes through identifying improvement opportunities and implementing technically robust and cost-effective solutions</li><li>Provide technical guidance and field support for process related issues in the plant</li><li>Lead investigations and HAZOP’s</li><li>Carry out detailed design reviews of plant modifications and support the implementation of projects</li><li>Develop and execute equipment/process assessment studies as well as feasibility studies for improvements to increase plant safety, reliability or efficiency</li><li>Mentor and develop young engineers.</li><li>Maintain the highest standards of integrity, engineering ethics and professional conduct.</li></ul> Requirements: <ul><li>Hold at least a BS degree in chemical engineering from a recognized university.</li><li>Minimum of 10 years’ industry experience preferably at operating facilities</li><li>Be able to perform process simulations and carry out equipment sizing and performance calculations (e.g. Relief valve, control valves, heat exchanger performance</li><li>Have significant experience in design development, technical design reviews and project execution (pre-commissioning, commissioning &amp; startup)</li><li>Have experience in process safety management systems &amp; tools such as HAZOPs and MOC’s</li><li>Possess a thorough knowledge of industry standards (e.g. API) as well as best practices (RAGAGEP)</li><li>Professional Engineering, Chartered Engineer or equivalent certification is desirable.</li><li>Be capable of project and design assignments beyond the ability of the basic professional Engineer III or is qualified to an outstanding degree in one or another "Specialist#.</li><li>Have a thorough knowledge of English is required to perform analyses and studies in depth, make professional presentations and keep up with technical advancements</li><li>Must have a thorough knowledge of engineering practices and economic principles, calculation methods, design details, US and Codes, Standards and Specifications.</li></ul>

Skills

Industry

Location

Jobtitle

453 field engineer sr engineer Jobs found

Field Engineer - SR Engineer

Reliability Engineering (HdGP)

Process Engineer

Estimator

Safety Engineer - Drilling Workover Operation

Safety Engineer (Loss Prevention)

Cost Engineer ( GM )

Corrosion Engineer

ASC Cost Engineer

Chemical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

453 field engineer sr engineer Jobs found

Field Engineer - SR Engineer

Reliability Engineering (HdGP)

Process Engineer

Estimator

Safety Engineer - Drilling Workover Operation

Safety Engineer (Loss Prevention)

Cost Engineer ( GM )

Corrosion Engineer

ASC Cost Engineer

Chemical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.