Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Procurement Manager

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

Responsibilites: <ul><li>Develop and implement site-wide EHS programs aligned with federal, state, and local regulations, including OSHA, EPA, and DEA requirements for controlled substances.</li><li>Lead risk assessments, job hazard analyses (JHAs), and containment evaluations, particularly in areas handling high-potent and controlled substances.</li><li>Serve as the primary liaison for EHS-related aspects of DEA compliance, supporting controlled substance handling protocols in collaboration with Quality, Security, and Operations.</li><li>Oversee the environmental and safety controls for controlled substances, ensuring proper ventilation, storage, access restrictions, spill response, and waste disposal procedures in compliance with DEA and EPA regulations.</li><li>Develop and maintain physical and procedural controls related to controlled substance areas (e.g., vaults, restricted labs, destruction processes) in partnership with Security and Regulatory Affairs.</li><li>Lead the investigation and root cause analysis of all incidents, near-misses, and controlled substance discrepancies, and implement corrective/preventive actions.</li><li>Ensure training and education of site personnel in EHS best practices, with a focus on potent compound safety, exposure monitoring, and controlled substance handling protocols.</li><li>Implement industrial hygiene programs, including monitoring of airborne concentrations and potential operator exposure to potent and hazardous compounds.</li><li>Establish robust programs for emergency preparedness, including chemical spills, fires, security threats, and controlled substance incidents.</li><li>Maintain all required permits, records, and documentation related to hazardous waste, emissions, safety incidents, and controlled substance EHS compliance.</li><li>Partner with Engineering, Validation, and Operations to incorporate EHS and security standards into facility, utility, and equipment design and commissioning.</li><li>Foster a strong culture of safety, accountability, and environmental stewardship at all levels of the organization.</li></ul> Requirements: <ul><li>Bachelor’s degree in Environmental Science, Occupational Health &amp; Safety, Chemical Engineering, or related field (Master’s preferred).</li><li>Minimum of 7–10 years of progressive EHS experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Direct experience managing EHS compliance for controlled substances (DEA Schedules II–V) and high-potency APIs strongly preferred.</li><li>In-depth knowledge of OSHA, EPA, DEA, NJDEP, and global EHS regulations and guidelines.</li><li>Familiarity with industrial hygiene, containment technologies, and safe handling procedures for potent compounds</li><li>Experience leading EHS activities during greenfield/startup site development and qualification is a plus.</li></ul>

Role Description: <ul><li>As a member of our ISC Global Automotive team, you will focus on enhancing our S&amp;OE process and driving the successful implementation of SAP APO PP/DS or S4 ePPDS as well as SAP IBP in our manufacturing plants.</li><li>Leveraging your extensive experience with advanced planning software, you will help define business requirements, ensure system readiness, and guide local teams through adoption and optimization processes.</li></ul> Responsibilities: <ul><li>Drive initiatives in automation and advanced planning systems to enhance and refine S&amp;OE processes.</li><li>Lead cross-functional teams - including project managers, subject matter experts, and IT partners - in defining business requirements, designing.</li><li>Provide project updates to various stakeholders at different levels of the organization.</li><li>Focus on timely project completion, resource deployment, staying within budget and appropriate adoption by end users.</li><li>Develop comprehensive training materials for end users and deliver training sessions and champion best practices and contribute to the development of standardized processes</li></ul> Requirements: <ul><li>Master’s degree or equivalent in Supply Chain, Materials Management, Business, Logistics, Engineering, or related field.</li><li>5 years’ hands-on experience in supply chain and operations, ideally manufacturing planning.&nbsp;</li><li>Extensive user-side experience in SAP APO PP/DS or S4 ePPDS implementation (essential); experience with SAP IBP Response is highly desirable.</li><li>Proven ability to use and train others on APO PP/DS and/or S4 ePPDS tools.</li></ul>

Responsibilities: <ul><li>The ICT business unit HRBP – Plant serves as a strategic business partner and trusted thought partner to Plant Leaders and in country senior Management.</li><li>This position is located on-site, but a hybrid work schedule will also be considered Serve as the HR site leader for the Tullahoma facility, acting as a trusted advisor to site leadership and aligning HR support with key business initiatives.</li><li>Partner with the broader HR network to deliver strategic talent solutions, organizational design, and effectiveness initiatives, fostering a One HR mindset.</li><li>Provide guidance on leadership development, succession planning, and talent pipeline strategies to support long term organizational growth. </li><li>Champion diversity, engagement, and inclusion efforts, with a global mindset and focus on creating equitable access to development and information.</li><li>Coach and support managers on performance, team effectiveness, and employee development to enhance leadership capability and culture. </li><li>Lead and resolve complex employee relations matters, ensuring legal compliance and a respectful, inclusive workplace.</li><li>Design and implement talent development initiatives including stretch assignments, mentoring, and targeted training programs. </li><li>Lead HR project management efforts related to workforce transitions, organizational change, and process improvement initiatives.</li><li>Collaborate with cross-functional partners to deliver high-impact HR initiatives, ensuring clear communication, risk management, and timely execution.</li><li>Preferred: Experience supporting M&amp;A activities, including HR due diligence, integration planning, and workforce impact assessments. </li><li>Develop and manage detailed project plans for HR initiatives, including milestones, communications, and risk mitigation strategies.</li></ul> Requirements: <ul><li>Bachelor’s or Master`s degree in business, Human Resource Management, Psychology, or any related field 10+ years of progressive, international, HR related experience; breadth of HR knowledge and skills in a variety of fields in international context, including Business Partner; Experience in a manufacturing and or operations environment is strongly preferred.</li><li>Executive level and leadership experience; Experience influencing without authority.</li><li>Ability to influence, lead and drive execution into the functions/region through close partnership and collaboration with the broader HR function Proved track record in Organization Design, Change Leadership, Talent Management, and Organizational Development Ability to multi-task and work efficiently in a fast-paced, international matrix organization.</li><li>Strong project management and organizational skills Fluent English language skills Has advanced knowledge of regional labor laws and obligations and uses this knowledge to advise management, especially in conflict situations Excellent interpersonal, negotiation, and communication Ability to travel up to 10%</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Role Description: <ul><li>Reporting to the Head of Procurement, the Manager, Procurement is responsible for overseeing and managing all procurement activities within the indirect categories in the organisation. </li><li>This role encompasses the development and execution of procurement strategies, supplier management, supply chain optimization, compliance, process excellence, and end-to-end procurement life cycle management.</li></ul> Responsibilities: <ul><li>Develop and implement a comprehensive procurement strategy on indirect spend aligned with the organizations goals and objectives.</li><li>Provide strategic guidance and support to the procurement team and collaborate with senior leadership to align procurement goals with broader business objectives.</li><li>Engage with stakeholders to understand business needs, ensure that procurement policy and guidelines support the needs of the organization, and that best practice is delivered</li><li class="ql-align-justify">Develop sustainability strategy within the procurement function in collaboration with key critical vendors</li><li>Conduct industry research to identify potential suppliers and support the vendor qualification process</li><li class="ql-align-justify">Identify and eliminate waste and/or variability in the supply chain.</li><li class="ql-align-justify">Conduct due diligence on selected third-party providers to ensure quality is achieved at a reasonable cost and that transactions are legally and financially viable.</li><li class="ql-align-justify">Ensure processes and procedures are fully documented and followed. Support in audit gaps closure</li></ul> Requirements: <ul><li class="ql-align-justify">University Degree in Supply Chain and Logistics or related field</li><li class="ql-align-justify">5 years demonstrated experience in end-to-end supply chain management&nbsp;</li><li class="ql-align-justify">Professional qualification in Supply Chain and Logistics (CIPS level 5 or above)</li><li class="ql-align-justify">Knowledge of SAP ERP is an added advantage</li></ul>

Role Description: <ul><li>We are seeking a qualified and experienced Corporate Legal Counsel to join our Legal team in Egypt.</li><li>This middle management role supports corporate legal operations across Egypt and support MENAT region, with a focus on contract management, governance, regulatory compliance, and internal advisory.</li><li>The successful candidate will report directly to the Head of Legal and act as a legal business partner to internal stakeholders.</li></ul> Responsibilities: Corporate and Regional Support <ul><li>Assist in reviewing corporate processes and documentation within Egypt.</li><li>Support legal coordination and compliance efforts across the MENAT region.</li><li>Maintain and update corporate records and filings in accordance with internal and regulatory requirements.</li><li>Support corporate secretarial functions across the region and ensure timely documentation.</li></ul> Contract Management and Documentation <ul><li>Draft, review, and revise legal documents including but not limited to contracts, NDAs, service agreements, B2B/B2C agreements, and purchase orders.</li><li>Collaborate with internal teams and external counsel to ensure contractual terms meet legal and business objectives.</li><li>Maintain organized records of executed agreements and develop standardized templates.</li></ul> Governance and Compliance <ul><li>Assist in implementing internal governance policies and monitor compliance.</li><li>Conduct legal research and support risk assessments related to business decisions.</li><li>Identify potential legal risks and escalate issues to the Head of Legal with recommended solutions.</li></ul> Legal Advisory and Communication <ul><li>Provide clear explanations of legal terms and obligations to internal stakeholders.</li><li>Provide legal opinion and consultations to internal stakeholders.</li><li>Act as a liaison between the legal department and other business units.</li><li>Prepare legal summaries and reports for senior legal review.</li></ul> Regulatory and Governmental Affairs <ul><li>Support corporate matters including GAFI documentation and authentication processes.</li><li>Liaise with governmental authorities regarding licensing and regulatory compliance.</li><li>Ensure adherence to company HSE policies and contribute to legal compliance in risk assessments.</li><li>Handle external law firms and corporate secretariate work and have the ability to draft bilingual OGMs, EGMs and BoDs.</li></ul> Requirements: <ul><li>Bachelor of Law (LL.B.) or Juris Doctor (J.D.) with a minimum grade of “Good”.</li><li>Master of Laws (LL.M) or equivalent postgraduate qualification is a plus.</li><li>4 – 7 years of experience in corporate law within a reputable law firm or multinational organization.</li><li>Admitted to the Egyptian Bar Association.</li><li>Fluent in English and Arabic (written and spoken).</li><li>Strong knowledge of contract law, corporate governance, licensing, and regulatory frameworks.</li><li>Familiarity with GAFI procedures and governmental dealings.</li><li>Litigation experience is a plus.</li></ul> Skills and Competencies <ul><li>Legal research, drafting, and negotiation.</li><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and presentation abilities.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>High attention to detail and sound judgment.</li><li>Proficiency in Microsoft Office applications (Word, Excel, PowerPoint).</li></ul>

Role Overview: <ul><li>The Product Manager / Senior Product Manager – Hospital &amp; Oncology will be responsible for driving strategic and operational marketing initiatives for the Hospital Care portfolio across the Malaysian market.&nbsp;</li><li>This role focuses on developing and executing brand strategies, launching new products, and expanding the business through data-driven insights and strong cross-functional collaboration. The incumbent will play a key role in ensuring successful brand performance, portfolio growth, and alignment with corporate objectives within the hospital and institutional healthcare segments.</li></ul> Responsibilities: Marketing Planning (40%) <ul><li>Lead the development and execution of brand strategies and marketing plans to achieve business objectives and ensure effective market penetration.</li><li>Formulate pre-launch preparedness and go-to-market strategies for new and existing hospital care products.</li><li>Design and implement initiatives to enhance field force effectiveness, including sample strategy, sales meetings, and other sales-related marketing activities.</li><li>Develop and manage the annual brand business plan, including strategic priorities, objectives, and budget allocation.</li><li>Optimize resource planning and allocation to address evolving market dynamics and competitive challenges.</li></ul> New Portfolio Exploration &amp; Business Development (35%): <ul><li>Conduct in-depth product and market analyses to forecast demand, patient flow, and revenue potential for new products.</li><li>Generate actionable market insights through data analysis and engagement with healthcare professionals (HCPs).</li><li>Develop robust business cases for potential new portfolio additions, encompassing both prescription and hospital-based products.</li><li>Present business proposals and feasibility assessments to principals and senior management for approval and alignment.</li></ul> Marketing Implementation (25%): <ul><li>Plan, coordinate, and execute marketing campaigns and customer engagement activities to support product launches and ongoing brand promotion.</li><li>Build and strengthen relationships with key stakeholders including KOLs, hospital administrators, and healthcare associations to enhance brand reputation and visibility.</li><li>Implement and manage KOL engagement strategies aligned with brand objectives.</li><li>Manage brand budgets effectively and ensure timely development and rollout of marketing and promotional materials.</li><li>Support Continuing Medical Education (CME) programs and conduct product training sessions for the sales and medical teams to ensure consistent brand messaging and clinical accuracy.</li></ul> Requirements: <ul><li>Bachelor’s degree in Science or a related field.</li><li>Minimum of 2–3 years of experience as a Product Manager in a multinational pharmaceutical company.</li><li>Prior experience in a generic pharmaceutical company (in sales or product management) is an added advantage.</li><li>Strong understanding of key healthcare channels including general practitioners, private hospitals, public hospitals, and retail pharmacies.</li><li>Proven track record in brand management, product launches, and marketing strategy execution within the hospital or institutional care segment.</li><li>Customer-oriented with excellent interpersonal and communication skills.</li><li>Demonstrated ability to work collaboratively within cross-functional teams.</li><li>Exposure to digital marketing initiatives and analytics-driven campaigns is preferred.</li><li>Highly detail-oriented, with strong problem-solving and analytical skills.</li><li>Excellent verbal, written, and presentation abilities.</li><li>Strategic thinker with a performance-driven approach.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: Supplier Management &amp; Development: <ul><li>Identify, evaluate, and onboard new suppliers to support business requirements.</li><li>Conduct supplier audits and performance assessments to ensure quality and reliability.</li><li>Develop and maintain strong supplier relationships to improve lead times, cost, and supply chain efficiency.&nbsp;</li></ul> Cost Management &amp; Negotiation: <ul><li>Analyze cost structures and negotiate favorable terms for materials and components.</li><li>Support cost-reduction initiatives through competitive bidding, alternative sourcing, and value engineering.</li><li>Collaborate with finance and procurement teams to optimize the sourcing budget.</li></ul> Technical &amp; Cross-Functional Collaboration: <ul><li>Work closely with engineering, R&amp;D, and manufacturing teams to define sourcing requirements.</li><li>Ensure suppliers meet technical specifications and quality standards.</li><li>Support new product development by identifying suitable suppliers for prototypes and production.&nbsp;</li></ul> Supply Chain Optimization &amp; Risk Mitigation: <ul><li>Monitor market trends and risks to ensure a stable and competitive supply chain.</li><li>Develop strategies to mitigate supplier risks related to quality, pricing, and geopolitical factors.</li><li>Optimize sourcing strategies to reduce lead times and ensure on-time delivery.</li></ul> Requirements: Required Qualifications &amp; Skills: Education &amp; Experience: <ul><li>Bachelor’s degree in mechanical engineering, Electrical Engineering, Supply Chain Management, or a related field.</li><li>5+ years of experience in sourcing, procurement, or supplier management (preferably in automotive, electronics, or manufacturing industries).</li></ul> Technical &amp; Soft Skills: <ul><li>Strong negotiation and analytical skills.</li><li>Experience in working with SAP systems and sourcing tools.</li><li>Knowledge of supplier qualification processes, cost analysis, and risk assessment.</li><li>Familiarity with engineering drawings, specifications, and manufacturing processes.</li><li>Excellent communication, stakeholder management, and problem-solving abilities.</li></ul>

Role Description: <ul><li>The Entry-Level Associate, Quality Assurance supports the Quality Management System (QMS) and documentation processes at the Chestnut Ridge site.</li><li>This role is designed for individuals beginning their career in pharmaceutical quality assurance and provides hands-on experience in maintaining compliance and supporting documentation workflows in a regulated environment.</li></ul> Responsibilities: <ul><li>Assist in organizing and maintaining QMS documentation including SOPs, CAPAs, deviations, and complaints.</li><li>Support the preparation and tracking of quality metrics and trending reports.</li><li>Help coordinate internal audits and document audit responses.</li><li>Participate in documenting product quality complaints and adverse event records.</li><li>Aid in digitizing logbooks and checklists using electronic systems.</li><li>Collaborate with cross-functional teams to ensure timely and accurate documentation updates.</li><li>Provide administrative support for change control processes and quality-related meetings.</li><li>Assist in preparing documentation for regulatory inspections and external audits.</li><li>Maintain document control systems and ensure timely review and archival of QA records.</li><li>Support training documentation and tracking for QA-related procedures.</li><li>Help with data entry and analysis for quality reports using basic statistical tools.</li><li>Monitor document lifecycle and ensure version control compliance.</li><li>Participate in continuous improvement initiatives related to documentation and QMS processes.</li></ul> Requirements: Education &amp; Experience <ul><li>Required Education: Bachelor’s degree in Pharmaceutical Sciences or a related field.</li><li>Preferred Education: Master’s degree is a plus.</li><li>Experience: 1–3 years in a pharmaceutical or regulated industry (internships or co-op experience acceptable).</li><li>Tools/Technologies: Familiarity with QMS platforms and electronic documentation systems preferred.</li></ul> Physical Requirements <ul><li>On-site role at Chestnut Ridge, NY.</li><li>Standard work hours: 8 AM to 5 PM.</li><li>No travel required.</li><li>No lifting or driving responsibilities.</li></ul>

Skills

Industry

Location

Jobtitle

193 field safety compliance Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Procurement Manager

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

193 field safety compliance Jobs found

Environmental Health and Safety (EHS) Manager

Supply Chain Business Process Expert

HR Business Partner IV

Operations Manager

Procurement Manager

Corporate Legal Counsel

Product Manager / Senior Product Manager (Hospital & Oncology)

Quality Engineer

Strategic Sourcing Analyst

Associate, Quality Assurance (QMS)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.