Manufacturing Engineer - Automation Mechanical

Talent Acquisition Specialist

Quality Improvement Manager

Client Advisor - Luxury Fashion Retail 

F&B Sales Engineer - South Region - Industrial Pumps

Customer Service Specialist

MPDE CA Process Design Engineer(Senior Engineer)

Industrial Sales Engineer

Process Equipment Engineer

Principal R&D/Product Development Engineer (Remote)

Responsibilities: Equipment Development, Commissioning and Acceptance <ul><li>In order to improve the efficiency for production, Work with process team and vendors to review the design of&nbsp;automation machine or fixtures; qualify and acceptance the new machine; set-up maintenance plan and implementation; improve the mass production&nbsp;machine and fixture to enhance the productivity"</li></ul> Assembly jigs: <ul><li>Evaluate new tool, fixture and equipment demand/cost for new projects;</li><li>Design and review the tool, fixture and equipment with core team members meeting engineering and EHS requirement.&nbsp;</li><li>Upload all tooling prints to data management system( PDMLink, etc.)</li><li>Discuss and review details of tool/fixture/equipment with outside supplier.</li><li>Follow up the purchasing process to fabricate new tool/fixture/equipment.</li></ul> Technical support <ul><li>In order to en sure the auto line running smoothly, Provide technical support to manufacturing team during pilot run and production start-up/change over.</li></ul> Problem Solving <ul><li>In order to ensure the production running smoothly, provide support on Problem identification and trouble-shooting with solution for a wide range of complex mechanical problems. Responsible for the effective communication across the company"</li></ul> Training Guidance: <ul><li>Line maintenance/change over together with/guiding the technicians to make sure automation machine run smoothly</li></ul> Requirements: <ul><li>Bachelor’s Degree in Mechanical Engineering or Automation;</li><li>Experience w/ automated assembly machines, skilled in fixture/jig design and trouble-shooting for automation machine;</li><li>Familiar with Vision Inspection (Keyence/Cognex), Programmable Logic Controllers (PLC), Pneumatics, sensors, motors and other motion control devices and components selection;</li><li>Robot knowledge will be a plus;&nbsp;</li><li>Interfacing knowledge between mechanical and electrical;</li><li>Familiar with Pro-E or SolidWorks, AutoCAD software to create 2D and 3D drawing</li><li>Proven strong analytical and problem solving skills, good interpersonal skills.&nbsp;</li><li>English skills, able to ready technical materials in English</li></ul>

Responsibilities: <ul><li>Manage the recruitment process end to end</li><li>Keep an overview of our recruitment needs via regular meetings with our Hiring Managers</li><li>Verify job descriptions with the hiring manager and design interview questions that reflect the positions requirements and attract talents to the company</li><li>Determining selection criteria for the open positions, in line with the organizations-culture and strategy</li><li>Sourcing of potential candidates through different sourcing channels</li><li>Screening of potential candidates and planning interviews and assessments</li><li>Run regular updates to hiring managers</li><li>Engaging with Senior Stakeholders</li><li>Organize and lead feedback sessions and coordinate the hiring decision</li><li>Propose employment offers in line with the company guidelines</li><li>Ensure that the recruitment process is efficient, effective and equitable</li><li>Foster long-term relationships with candidates</li><li>Designed and implemented innovative TA strategies for effective candidate sourcing</li><li>Developed strategic staffing plans aligned with business priorities</li></ul> Requirements: <ul><li>Minimum 7 year’s experience in recruiting for manufacturing or niche hiring along with commercial hiring.</li><li>Must have experience in recruitment metrics and analytics</li><li>Able to perform as an individual contributor and be hands-on</li><li>Well versed in social media, resume databases and professional networks</li><li>Experience with headhunting for mid-level positions</li><li>Hands-on experience with full-cycle recruiting using interview techniques</li><li>Good interpersonal and influencing skills. Has the ability to engage senior stakeholders.</li><li>Has a strong passion and desire to make a difference</li><li>Growth mindset and learning agility</li><li>Should have a recognized Masters / Bachelors degree</li><li>Proficient MS Excel</li></ul>

Role Information: <ul><li>The Quality Improvement Manager is responsible to drive and support improvement activities and convergent Problem-Solving competencies within AUT ASEAN, leveraging scalable methodologies and digital tools while unleashing people’s talent.</li><li>Working in collaboration with production plant at Gateway Thailand towards waste reduction and improving Incidents on our customer base.&nbsp;</li><li>She/he is the Leader in ASEAN Problem Solving Committee and leads cross functional teams to solve complex and difficult manufacturing and quality problems.</li><li>She/he contributes to the project selection that will have the highest impact on plant metrics.</li><li>She/he coaches plant problem solvers and ensures their development</li></ul> Responsibilities: <ul><li>Leader in ASEAN Problem Solving (PS) Committee.</li><li>Organize regular meeting review status &amp; planning.</li><li>Promote PS culture throughout the Plant and ASEAN at all levels.</li><li>Promote the selection of the projects that will have the highest impact on plant metrics (eg. CoPQ) and manage all PS projects including PS initiatives from Line QRM escalation to VSM/Plant Level.</li><li>Support production improvement process through PS projects.</li><li>Lead cross-functional team to apply diligently a structured problem-solving methodology that best fits the situation (Shainin, SPS, Six Sigma or other equivalent methods as described by the Shifting Gears)</li><li>Follow up all PS projects with project owner and provide coaching to ensure PS methodologies are correctly applied.</li><li>Regular project coaching with PS Master from Global, and follow-up to project closure and realize saving.</li><li>Proactively anticipate roadblocks to find solutions and escalate when needed.</li><li>Report out project progress, people development and savings to PS Committee and Management.</li><li>Tabulate and manage Plant/ASEAN people PS skill matrix and identify training needs, plan &amp; execution.</li><li>Coach, Develop and Expand local Problem Solver Practitioners.</li><li>Represent ASEAN in PS matter and report status to regional and global level.</li><li>Alignment with AP and Global PS leaders for new PS initiatives and execution.</li><li>Any other assignments as delegated by reporting Manager.</li></ul> Requirements: <ul><li>Engineering degree (Mechanical or Electrical Engineering).</li><li>Strong understanding of 6 Sigma tools and Minitab usage.</li><li>Strong understanding of engineering fundamentals and product design</li><li>Experience in taking project using structured problem-solving methodology (Shainin Red-X, 6 Sigma, etc).</li><li>Experience in coaching and training.</li></ul> Specific Requirements(Mandatory): <ul><li>Certified Red X Master or Master Candidate (ability to coach) or Kepner-Tregoe.</li><li>Strong understanding of 6 Sigma tools and Minitab usage.</li><li>Able to develop Dashboard (PowerBI) and to apply Data Science (Python, R).</li></ul>

Responsibilities: <ul><li>Executive business strategy set by the store manager to deliver business results and targets on clienteling and performance KPIs.</li><li>He/she is the role model and mentor for the team in how to boost and improve:</li><li>The delivery of a couture service, strategic zoning encouraging sales in partnership and OTO appointment routine.</li><li>A colleague centric mindset and a fluid client journey across categories.</li><li>Conversion rate, cross selling, AVT, upselling</li><li>Ensure the inclusion of digital tools and assets in the client journey and in the clientelling routine.</li><li>Ensure suitable product knowledge engaging all team members in training through morning briefs and products brief planning.</li><li>Has a key role in coaching team members to develop their skills in selling techniques and Clienteling, and support store manager in identifying appropriate career paths for every individual.</li><li>Perform effective and motivating Monthly touch bases.</li><li>Capable of being an agent of change with and impeccable colleague team player approach.</li></ul> Requirements: <ul><li>Has effective management and coaching skills, is able to follow up on results, identify, opportunities, motivate people to go beyond their comfort zone and go the extra-mile.</li><li>Communicate transparently and effectively.</li><li>Very good understanding of performance KPIs and ability to implement action plan to improve them.</li><li>Has excellent product and story telling knowledge.</li></ul>

Responsibilities: <ul><li>Region coverage South India (Andhra Pradesh / Telangana /Karnataka / Tamil Nadu / Kerala).&nbsp;</li><li>Conduct market research to identify potential customers in the F&amp;B&amp;S Sector in South India.</li><li>Develop and implement targeted marketing strategies to reach potential customers in these sectors.</li><li>Key account management including End Users, OEMs &amp; System Integrators</li><li>Build long-term customer business relations right from the concept phase and ensure product standardization at customer sites.</li><li>Build and maintain relationships with existing customers in these sectors, identifying opportunities for cross-selling and upselling.</li><li>Attend industry events and exhibitions to showcase company products and engage with potential customers.</li><li>Provide technical expertise and assistance to customers, helping them to select the most suitable equipment for their specific applications in these sectors.</li><li>Act as the customers advocate and ensure their technical needs are met.&nbsp;</li><li>Work closely with the company product development team to identify and develop new products that meet the specific needs of the PI - F&amp;B&amp;S in India.</li><li>Produce and maintain detailed documentation on all customer interactions, including project timelines, equipment specifications, and budget constraints.</li><li>Provide ongoing technical support and guidance to other departments within the company as required to ensure that all customers receive the highest level of service and support.</li><li>Provide high-quality technical support to prospects and customers during pre- and post-sales situations.&nbsp;</li><li>Understand and solve challenging application problems by recommending appropriate company solutions.&nbsp;</li><li>Update records in CRM interface for opportunity pipeline, appointments, lead and present business analytical data through CRM&nbsp;</li></ul> Requirements:﻿ <ul><li>Hold relevant Diploma Mechanical / Bachelor of Engineering, Qualifications and a strong business background.</li><li>Preferably have at least 10 -15 years of experience in the Fluid Handling Industry.&nbsp;</li><li>Possess excellent written and spoken English communication skills.</li></ul>

Responsibilities: <ul><li>Manage incoming customer orders, phone and email enquires relating to price, delivery and product selection.</li><li>Respond to customer technical enquiries with information provided from Hub TSE’s and/or Product Management.</li><li>Update key accounts with regular open order status reports.</li><li>Work closely with Industrial and Utility Sales teams as required to support the allocated customer base.</li><li>Identify new business opportunities and engage with relevant team members to close opportunities.</li><li>Help clients identify additional needs from our product portfolio.</li><li>Review the Daily Booking Reports – Commercial and Scheduling and check for order entry accuracy and highlight delivery concerns to Logistics.</li><li>Attend to customer queries on outstanding orders. For Key Account Customers (KAC), proactively feedback rescheduled delivery information to the customer as advised by the Supply Department.</li><li>Provide accurate information in a timely manner to Logistics, Stores and Production to enable despatch to meet customer request.</li><li>Complete paperwork interfacing with other Departments, - requests for credit and customer returns. Ensure approval by the appropriate level as defined in the DOA.</li><li>Attend the meetings chaired by the Supply Chain Manager &amp; Sales Manager for updates on sales performance and Key Account Customer sales strategy. Be prepared to discuss any issues affecting the customer service function.</li><li>Undertake other duties as required from time to time by the Sales Operations Manager</li><li>Provide input on key accounts directly to the Supply Chain Manager as part of the Sales and Operations planning process.</li><li>Be involved in continuous improvement programmes that are aimed at achieving excellence in customer service.</li><li>Follow all company internal procedures and policies.</li><li>At all times act in the best interest of both internal and external customers.</li><li>Support CSS other team members as required.</li><li>Ensure all relevant sales documentation is filed accurately to align with company CRD Order Management Policy.</li><li>Ensure customer returns (RMA’s) are managed from initial enquiry through to credit issue.</li><li>Ensure adequate notice of absence is provided to allow coverage of the role.</li></ul> Requirements: <ul><li>Secondary Education Level.</li><li>High proficiency with SAP Microsoft &amp; MRP applications</li><li>Ability to organise self and manage multiple tasks.</li><li>Previous Customer Service / Sales experience essential.</li><li>The ability to adapt to different types of customers</li><li>Manage high workload with quick accurate responses to customer inquiries</li><li>Be able to communicate confidently and effectively.</li><li>Work as part of a close Customer Service team to provide an Exceptional Customer Experience</li></ul>

Responsibilities: Process Solution Development: <ul><li>Design or optimize production process routes based on product design drawings (e.g., mechanical structures, electrical schematics), including raw material selection, process planning (e.g., cutting, wire pre-treatment, welding, forming, assembly, testing), equipment selection and parameter setting, and DOE development to ensure mass and stable production.</li><li>For new products (e.g., mechanical parts, electronic components), organize DFM reviews within the MPDE department, provide optimization suggestions from a manufacturability perspective, develop trial production process plans, participate in trial production, and resolve process issues (e.g., dimensional deviations, assembly difficulties, inefficiencies).</li></ul> Process Documentation: <ul><li>Prepare standardized process documents, such as SOPs, process flowcharts, PFMEA, and inspection standards, to clarify operational specifications and quality control points for each process, ensuring unified execution by production personnel.</li></ul> Production Efficiency and Quality Optimization: <ul><li>Analyze existing production processes, use lean production tools (e.g., 5S, value stream analysis) or technical improvements (e.g., introduction of automated equipment, process consolidation) to reduce production costs, shorten cycle times, and enhance capacity.</li><li>Collaborate with the quality department to investigate the causes of quality anomalies (e.g., excessive defect rates) from a process perspective (e.g., insufficient equipment precision, unreasonable process parameters), develop improvement measures, and validate their effectiveness through DOE.</li></ul> Cross-Department Collaboration: <ul><li>Work with R&amp;D departments, participate in product design reviews, provide suggestions from a process feasibility perspective (e.g., simplifying structures to reduce assembly difficulty), and promote Design for Manufacturability (DFM).</li><li>Communicate with supply chain departments to confirm the process compatibility of raw materials and assist in resolving process-related issues with purchased materials. Cooperate with production departments to train operators on new processes and equipment, ensuring successful implementation.</li><li>Collaborate closely with automation teams, participate in automation solution reviews, and develop validation methods.</li></ul> Technological Innovation and Cost Reduction: <ul><li>Stay updated on industry advancements (e.g., 3D printing, smart inspection equipment, laser welding), evaluate their applicability to existing production, and drive process upgrades. Achieve cost reduction through process optimization and the use of alternative low-cost materials (without compromising quality).</li></ul> Requirements: Education and Major: <ul><li>Bachelor’s degree or higher in Mechanical Engineering, Materials Science and Engineering, Industrial Engineering, Electrical Automation, or related fields.</li></ul> Knowledge and Skills: <ul><li>Mastery of fundamental manufacturing process principles (e.g., machining, electronic assembly, heat treatment) and familiarity with production processes in at least one industry (e.g., automotive parts, electronic devices, machinery manufacturing).</li><li>Strong process analysis skills, ability to interpret drawings using CAD/SolidWorks, and perform data analysis with tools like Minitab (e.g., analyzing defect rate causes).</li><li>Knowledge of quality and efficiency improvement methods such as Lean Production and Six Sigma; prior experience in process optimization projects is preferred.</li></ul> Experience Requirements: <ul><li>Typically requires 5+ years of experience in process development or production technical support in relevant industries; familiarity with high-speed cable equipment and process requirements is preferred.</li></ul>

Responsibilities: <ul><li>Conduct market research to identify potential customers in the Industrial Sector in North India.</li><li>Develop and implement targeted marketing strategies to reach potential customers in these sectors.</li><li>Key account management including End Users, OEMs &amp; System Integrators</li><li>Build long-term customer business relations right from concept phase and ensure product standardization at customer sites.</li><li>Build and maintain relationships with existing customers in these sectors, identifying opportunities for cross-selling and upselling.</li><li>Attend industry events and exhibitions to showcase company products and engage with potential customers.</li><li>Provide technical expertise and assistance to customers, helping them to select the most suitable equipment for their specific applications in these sectors.</li><li>Act as the customers advocate and ensure their technical needs are met.&nbsp;</li><li>Work closely with the company product development team to identify and develop new products that meet the specific needs of the Process Industries in India.</li><li>Produce and maintain detailed documentation on all customer interactions, including project timelines, equipment specifications, and budget constraints.</li><li>Provide ongoing technical support and guidance to other departments within the company as required to ensure that all customers receive the highest level of service and support.</li><li>Provide high-quality technical support to prospects and customers during pre- and post-sales situations.&nbsp;</li><li>Understand and solve challenging application problems by recommending appropriate company solutions.&nbsp;</li><li>Update records in CRM interface for opportunity pipeline, appointments, lead and present business analytical data through CRM&nbsp;</li></ul> Requirements:﻿ <ul><li>Hold relevant Diploma Mechanical / Bachelor of Engineering, Qualifications and a strong business background.</li><li>Preferably have at least 10 -15 years of experience in the Fluid Handling Industrial, with a specific focus on pumps used in Process Industry applications.</li><li>Possess excellent written and spoken English communication skills.</li></ul>

Role Description: <ul><li>The Process Equipment Engineer will be a key technical leader responsible for the design, specification, procurement, installation, qualification, and ongoing reliability of process equipment for a greenfield sterile injectable IV bag manufacturing facility.</li><li>This role will play a critical part in ensuring that all manufacturing equipment all sterile manufacturing equipment are compliant with cGMP requirements, supports aseptic processing standards, and are capable of delivering high-quality product performance from day one of commercial operations. </li><li>Equipment includes sterile isolators, compounding, automated inspection, and secondary packaging for the production of sterile IV bags.</li><li>Working cross-functionally during the startup phase, the incumbent will drive equipment readiness, validation support, and serve as a technical subject matter expert (SME) for process equipment throughout the facility lifecycle.</li></ul> Responsibilities: <ul><li>Lead the specification, selection, and procurement of sterile injectable manufacturing process equipment, including isolator filling lines, formulation vessels, mixing systems inspection equipment, secondary packaging equipment, and associated support systems.</li><li>Develop user requirement specifications (URS), functional specifications (FS), and detailed equipment design documentation in compliance with regulatory and operational standards.</li><li>Manage equipment vendors, design reviews, factory acceptance testing (FAT), site acceptance testing (SAT), and oversee equipment delivery, installation, and commissioning.</li><li>Promote and ensure adherence to safety protocols and safe work practices.</li><li>Perform risk assessments for engineering and maintenance activities.</li><li>Collaborate with Validation, Quality, and Operations teams to support equipment qualification (IQ/OQ/PQ) and ensure all systems meet regulatory expectations for sterile manufacturing.</li><li>Establish preventative maintenance programs, spare parts inventories, and equipment lifecycle management plans to ensure long-term equipment reliability and availability.</li><li>Provide technical expertise during troubleshooting, deviations, and investigations related to process equipment performance, ensuring rapid resolution of issues.</li><li>Partner with Manufacturing and Quality teams to optimize equipment performance, drive continuous improvement initiatives, and support ongoing process optimization.</li><li>Identify and implement process improvements to enhance operational safety, efficiency, and reliability.</li><li>Support development of SOPs, equipment manuals, and operator training programs to ensure safe and compliant operation of process equipment.</li><li>Ensure equipment designs fully comply with cGMP, FDA, OSHA, and all applicable regulatory and safety standards.</li><li>Contribute to capital project planning, budgeting, and project execution related to new equipment or facility expansions.</li><li>Ensure ongoing regulatory inspection readiness and serve as SME for process systems during audits and inspections.</li></ul> Requirements: <ul><li>Bachelor’s degree in mechanical engineering, Chemical Engineering, Industrial Engineering, or related field.</li><li>3+ years of experience in pharmaceutical process equipment engineering, with significant exposure to sterile injectable manufacturing strongly preferred.</li><li>Direct experience with design, procurement, and qualification of aseptic manufacturing equipment and cleanroom environments.</li><li>Solid understanding of cGMP regulations, FDA/EMA expectations, and engineering best practices for sterile operations.</li><li>Experience working in greenfield or major facility expansion projects highly desirable.</li></ul> Skills/Competencies: <ul><li>Strong technical knowledge of process equipment design, aseptic manufacturing, and utility systems.</li><li>Proven project management skills with ability to handle complex, cross-functional projects.</li><li>Excellent problem-solving abilities and root cause investigation experience.</li><li>Effective communication and vendor management skills.</li><li>Ability to work independently in a fast-paced, startup-like environment.</li><li>Strong teamwork, collaboration, and continuous improvement mindset.</li><li>High attention to detail with strong commitment to safety, compliance, and product quality.</li></ul>

Responsibilities: <ul><li>Lead the development of sockets, high-speed connectors, and cable assemblies from market definition to production release.</li><li>Collaborate with cross-functional teams (sales, applications, field engineers, project managers) to translate Voice of Customer (VOC) into technical concepts and specifications.</li><li>Conduct feasibility studies and generate design concepts.</li><li>Perform mechanical and thermal simulations.</li><li>Present design evaluations and proposals to customers.</li><li>Create detailed 2D/3D designs, DFMEA, and tolerance analyses.</li><li>Build and validate prototype samples.</li><li>Finalize product qualification and specifications.</li><li>Provide ongoing technical support to Operations, Quality, and Production teams.</li><li>Manage Engineering Change Notifications (ECN) and Product Change Notifications (PCN).</li><li>Maintain system-level understanding of customer applications and integrate solutions into the design process.</li><li>Drive projects through the LEANPD stage-gate process to ensure timely delivery of high-quality, cost-effective solutions.</li><li>Coordinate with manufacturing, procurement, and external suppliers to align with technical, quality, and cost targets.</li><li>Generate and manage all necessary technical documentation including design drawings, engineering changes, and design history files.</li><li>Support post-launch activities and continuous improvement initiatives.</li></ul> Requirements: <ul><li>Bachelor’s degree in Mechanical Engineering or equivalent work experience.</li><li>10+ years of relevant mechanical engineering experience involving:</li><li>Electrical components and devices.</li><li>Mechanical structure design.</li><li>Manufacturing tooling development (stamping, molding, assembly, plating).</li><li>Manufacturing process development.</li></ul> Strong knowledge in: <ul><li>Socket, connector, and cable assembly design.</li><li>Material selection.</li><li>Tolerance analysis.</li><li>DFMEA.</li><li>Product qualification.</li></ul> Expertise in 3D CAD applications (preferably Creo), including: <ul><li>3D solid modeling (sheet metal).</li><li>2D drawings.</li><li>PDM Link Data Manager.</li><li>General understanding of SpaceClaim, SolidWorks, or other conceptual design tools.</li></ul> Advanced proficiency in: <ul><li>Geometric Dimensioning &amp; Tolerancing (GD&amp;T).</li><li>Limit and fit analysis including statistical tolerance analysis.</li><li>Finite element analysis tools (e.g., Ansys, Workbench) for elastic and plastic behavior of metals.</li></ul> Proven ability to: <ul><li>Develop and write design objectives and technical product specifications.</li><li>Lead product development from concept to production.</li><li>Provide technical leadership across the full product lifecycle.</li></ul> In-depth knowledge of manufacturing processes: <ul><li>Machining, molding, stamping, plating, assembly.</li><li>Best practices in Design for Manufacturing (DFM).</li><li>Solid understanding of competitive product landscape and intellectual property considerations.</li><li>Fluent in English (verbal and written) to support global communication.</li><li>Comfortable working in a global, cross-functional team and across time zones.</li><li>Strong analytical and problem-solving skills; able to make data-driven decisions with minimal supervision.</li><li>Proficient in MS Office tools: Word, Excel, PowerPoint, Outlook, Teams, etc.</li></ul>

Skills

Industry

Location

Jobtitle

15 fluid selection Jobs found

Manufacturing Engineer - Automation Mechanical

Talent Acquisition Specialist

Quality Improvement Manager

Client Advisor - Luxury Fashion Retail

F&B Sales Engineer - South Region - Industrial Pumps

Customer Service Specialist

MPDE CA Process Design Engineer(Senior Engineer)

Industrial Sales Engineer

Process Equipment Engineer

Principal R&D/Product Development Engineer (Remote)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

15 fluid selection Jobs found

Manufacturing Engineer - Automation Mechanical

Talent Acquisition Specialist

Quality Improvement Manager

Client Advisor - Luxury Fashion Retail

F&B Sales Engineer - South Region - Industrial Pumps

Customer Service Specialist

MPDE CA Process Design Engineer(Senior Engineer)

Industrial Sales Engineer

Process Equipment Engineer

Principal R&D/Product Development Engineer (Remote)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.