Customer Engineer - C3

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Chemist Data Reviewer

Responsibilities: <ul><li>Install, maintain, and upgrade customer equipment</li><li>Apply basic diagnostic techniques to assess equipment and address technical issues, with assistance from Senior Field Service Engineers [Customer Engineers]</li><li>Collaborate with Senior Field Service Engineers [Customer Engineers] and/or the customer to understand roadmaps, process flows, inflection points, requirements, and business challenges&nbsp;</li><li>Train and mentor junior Field Service Engineers [Customer Engineers]</li><li>Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems</li><li>Coordinate and communicate directly with customers</li><li>Fulfill additional duties, as assigned</li></ul> Requirements: <ul><li>Completion of a Diploma and/or Bachelor’s degree, military technical training, field service experience, or trade certification</li><li>4-7 years of work experience in semiconductor industry or other equipment support industry</li><li>Advanced mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, and/or thermodynamics</li><li>Strong knowledge of hand tools and their appropriate usage, including digital multimeters</li><li>Effective written and verbal communication skills</li><li>Basic knowledge of Microsoft Excel, Word, and PowerPoint&nbsp;</li><li>Possession of a valid driver’s license and the ability to obtain a passport, if travel is required.</li></ul>

Overview: <ul><li>On-site customer work across the EMEA region (Data Centers, Utilities, Oil &amp; Gas) Remote work handling administrative and planning tasks</li><li>Candidates can be based in Ireland, the UK, Netherlands, Poland, or Romania, ideally near a major airport.</li></ul> Responsibilities: <ul><li>Lead installation, maintenance, commissioning, testing, and fault-finding of MV and HV equipment</li><li>Lead installation projects, oversee third-party providers, support fellow engineers, and ensure equipment operates at optimal performance.</li><li>Perform site testing (e.g., insulation resistance, primary/secondary injection, functional testing)</li><li>Provide advanced technical support and root cause analysis for complex power distribution fault</li><li>Review and approve service documentation, test reports, and commissioning records</li><li>Act as the primary customer contact during project execution</li><li>Support and mentor service engineers, promoting safety and best practices</li><li>Collaborate with project teams to meet delivery targets and ensure customer satisfaction</li></ul> Requirements: <ul><li>Higher Diploma or Degree in Electrical Engineering</li><li>Proven experience in power distribution testing and commissioning</li><li>Ability to test and commission large MV to HV installations</li><li>Experience with protection relay programming</li><li>Strong IT skills and attention to detail</li><li>This is a hands-on, customer-facing position suited for candidates with a strong technical background. Skills:</li><li>Strong troubleshooting and problem-solving abilities</li><li>Leadership mindset with the ability to coach and develop others</li><li>Flexibility to travel extensively across the EMEA region</li></ul>

Job Summary: <ul><li>This position is dedicated to the review, verification, and assessment of analytical data generated within the Quality Control laboratory.&nbsp;</li><li>The role ensures that all laboratory documentation meets cGMP, regulatory, and internal quality standards.&nbsp;</li><li>Responsibilities do not include performing laboratory testing, operating instruments, or releasing materials or products.</li></ul> Responsiblities: <ul><li>Review complete analytical data packages generated from a wide range of QC laboratory instrumentation, including HPLC, UPLC, GC, UV?Vis, FT?IR, Dissolution, X?Ray Diffraction (XRD), pH meters, Karl Fischer, ICP-MS, and other compendial or platform - specific systems.</li><li>Verify calculations, chromatographic integrations, peak assignments, system suitability criteria, and instrument audit trails across software platforms such as Empower, ChemStation, LabSolutions, ICP?MS data systems, and dissolution software.</li><li>Assess data for compliance with approved analytical methods, compendial requirements, SOPs, and cGMP expectations, ensuring consistency across diverse analytical techniques.</li><li>Evaluate raw data outputs such as chromatograms, spectra (UV, IR), dissolution profiles, XRD patterns, elemental analysis reports, pH logs, and mass spectrometry data for accuracy and scientific soundness.</li><li>Identify discrepancies, atypical trends, integration anomalies, missing data, or potential data integrity concerns and escalate findings promptly.</li><li>Confirm that all raw data, worksheets, logbooks, electronic records, and metadata comply with ALCOA+ principles and meet internal documentation standards.</li><li>Review LIMS entries for accuracy, completeness, and proper linkage to supporting raw data and metadata.</li><li>Ensure instrument-specific parameters (e.g., wavelength accuracy for UV, calibration curves for ICP?MS, dissolution run conditions, GC column performance) are appropriately documented and meet acceptance criteria.</li></ul> Requirements: Education &amp; Experience: <ul><li>Minimal acceptable level of education, work experience and certifications required for the job</li><li>Bachelor of Science Degree in chemistry, chemical engineering or related field with 4+ years’ relevant analytical laboratory experience OR</li><li>Master’s Degree in above disciplines with 2+ years’ relevant analytical lab experience</li></ul> Knowledge: <ul><li>Has strong knowledge of laboratory software and has expanded knowledge of chromatographic software (e.g. Waters Empower, Agilent ChemStation and Sotax WinSotax), using custom fields, custom calculations and custom reports</li><li>Full proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc.</li><li>Thorough knowledge of applicable safety and standards guidelines, such as SOP, cGMP, GLP, DEA regulations and/or MSDS</li><li>Has demonstrated competence in conducting chemical analyses</li><li>Strong knowledge of wet chemistry techniques</li><li>Competency in Microsoft Office Suite</li></ul> Skills &amp; Abilities: <ul><li>Ability to critically review and analyze data, interpret information, and draw conclusions from relevant or missing information, reporting to management</li><li>Ability to display and analyze data in a logical manner</li><li>Ability to critically review, analyze data, interpret information, and draw conclusions from relevant or missing information</li><li>Ability to display and analyze data in a logical manner</li><li>Strong verbal and written communication skills as well as good computer skills</li><li>Strong attention to details and accurate record keeping</li><li>Establish and maintain cooperative working relationships with others</li><li>Solid organizational skills</li><li>Ability to coach less senior staff and develop laboratory skills and ability</li><li>Ability to take initiative, set priorities and follow through on assignments</li></ul> Physical Requirements: <ul><li>Extended periods of sitting, standing, walking, reaching, climbing/balancing, kneeling/crouching/crawling, looking at monitor for extended periods, moderate noise levels and potential business travel.&nbsp;</li><li>Work is in an FDA and DEA-regulated pharma lab environment with risk of exposure to various chemicals</li><li>Must occasionally lift and/or move up to 15-25 lbs.</li><li>Ability to wear personal protective equipment, including respirators, gloves, etc.</li><li>Specific visions abilities are required by this job include close vision and color vision</li><li>Ability to occasionally tolerate significant differences in temperature and/or humidity for short periods</li></ul>

Skills

Industry

Location

Jobtitle

3 gas chromatography Jobs found

Customer Engineer - C3

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Chemist Data Reviewer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

3 gas chromatography Jobs found

Customer Engineer - C3

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Chemist Data Reviewer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.