MGR II Qlty & Reliability Engineering

Senior Engineer, Global Facilities Central Engineering, Construction - Mechanical

Operations Manager

Principal/Staff Engineer – Firmware Development

Principal NAND Reliability Product Engineer

Staff/Principal Engineer - CMP Advanced NAND

Fronted End Central Process Integration Senior Engineer

MTS – FECOS CPIE Device

Stamping Manager

Customer Process Engineer(Mandarin Speaker)

Responsibilities: <ul><li>Primary responsibility for developing and driving standardized Design for Reliability Engineering (DfRE) and Robustness Validation (RV) Methodologies for all Power Products.</li><li>Drive a DFSS culture, one of innovation, constant learning, and continuous improvement that aspires to deliver "First Time Right"; provide product development and DFSS training, coaching, and mentoring to product design teams to create a world class product development organization.</li><li>Drive excellence in Design for Reliability ensuring comprehensive utilization of modeling and simulation, structured DOE approaches, robust product validation including HALT/HAST and Test to Failure (TTF) methodologies.&nbsp;Oversee integrating reliability considerations during technology &amp; product evaluation, NPI product development from receipt of Customer Spec (Mission Profile) through Product Release into mass production; will have T&amp;V Plan + Reliability Test Plan Finalization Authority for Power Products.</li><li>Partner with PDE’s to quickly produce and evaluate first samples to expedite speed to market and drive fast and iterative product design improvements; drive Early Concept Testing identifying potential weaknesses and failure mechanisms in the product design and validating all improvements through testing and capability analysis.</li><li>Work very closely with MPDE about Process Developments and Equipment Developments, developing comprehensive test plans to ensure capability to six sigma standards and driving world-class Simultaneous Engineering (Concurrent Engineering).</li><li>Support Mfg Quality with failure analysis (F/A) and Root Cause and Corrective Action (RCCA) of line scrap and customer returns as well as competitive benchmarking activities.</li><li>Lead the identification of special testing needs and requirements and partner with Global R&amp;T COE to develop Custom Test Equipment, Tests &amp; Test Specifications.&nbsp;Oversee all application testing for Power Products.</li><li>Drive high performance organization by providing your team routine coaching and feedback, holding your team accountable to meet performance objectives, and providing meaningful development to increase individual/team capability.&nbsp;</li><li>Manage employee well-being by prioritizing work, effectively managing resource loading, and providing flexibility to enable employees to successfully balance their work and personal lives.</li><li>Drive organization effectiveness by structuring your organization in a way that best enables the BU strategy, maximizes resource efficiency and productivity, and provides role clarity and clear lines of accountability.</li><li>Manage the talent in your organization to support the business now and to proactively prepare for the future by identifying organization skillset/role gaps, implementing plans to fill any skillset/role gaps, and assessing current talent fit to ensure the right talent is matched to the right roles to best meet the needs of the business.</li></ul> Requirements: <ul><li>Bachelor/ Master’s degree in technical discipline (Electrical Engineering, Electronics, Mechatronics)</li><li>10+ years of Experience in all aspects of reliability engineering for electronic or mechatronics products from reliability estimation to reliability calculation and risk identification.</li><li>Must also have many years of experience working with test equipment, test systems, test labs, development and deployment of HALT/HAST testing, Test &amp; Validation Plans, development of custom test systems and performing “application tests.”&nbsp;Must have a good balance between theory and practice.</li><li>Experience interacting with global cross-functional engineering teams in multi-site global organization.</li><li>Excellent English, both verbal and written, and the ability to interact professionally with customers, leadership, stakeholders, cross functional teams and subject matter experts.</li><li>Exceptional analytical, critical thinking, and problem-solving skills and ability to make decisions when presented with a series of challenges, conflicts and constraints.&nbsp;Ability to drive to big picture goals and milestones while valuing and maintaining strong attention to the details.</li><li>Knowledge on FIT estimation methodology, statistical analysis for reliability calculation such as Weibull-analysis or 2-statistics, application of Bayes theorem, random failure principle, FMEDA, FTA</li><li>Reliability Engineering training from company, ASQ, TUV, Reliasoft or equivalent</li><li>Experience with custom product development, working closely with customers to define mission profile of the end application and optimizing reliability strategy based on customer needs.</li><li>Experience in running statistical analysis for reliability calculation for mechatronic products.</li><li>A high curiosity in understanding how systems/products work along with a reverse engineering mindset.</li><li>Willingness to travel as required, ~20%&nbsp;</li></ul>

Responsibilities: <ul><li>Build effective collaboration across facilities, procurement, manufacturing, IT, and operations teams</li><li>Communicate project updates, risks, and key milestones to stakeholders and leadership</li><li>Identify risks, escalate issues proactively, and recommend mitigation strategies</li><li>Support root cause analysis and technical problem-solving across global sites</li><li>Contribute to development and standardization of Best Known Methods (BKMs)</li><li>Drive alignment of engineering priorities with global facilities strategies</li><li>Lead or support capacity planning and scenario analysis across site networks</li><li>Support sustainability initiatives aligned with corporate goals</li><li>Lead construction engineering activities for semiconductor facilities across design, construction, commissioning, and operations phases</li><li>Provide technical engineering support to construction teams to drive project execution and operational excellence</li><li>Manage scope, schedule, cost, and quality to meet project and business requirements</li><li>Support large-scale greenfield fab projects across U.S. and Asia, ensuring compliance with standards and regulatory requirements</li><li>Review engineering design packages and provide timely, documented feedback</li><li>Monitor construction progress and resolve technical issues during project execution</li><li>Support cost estimation, scheduling, and business case development</li><li>Coordinate with internal teams and external consultants to ensure alignment with project goals</li><li>Drive continuous improvement in construction practices with a focus on efficiency, innovation, and sustainability</li></ul> AI Responsibilities: <ul><li>Integrate AI-assisted tools into engineering and project workflows to enhance efficiency, quality, and decision-making</li><li>Identify opportunities to apply AI-driven insights in construction engineering, data analysis, and project planning</li><li>Contribute to continuous improvement by sharing AI-enabled best practices within the team</li></ul> Requirements: <ul><li>Minimum Required Qualifications / Experience</li><li>Bachelors degree in Mechanical Engineering, Construction, Building Services, or related field.</li><li>Minimum 8 years of mechanical engineering experience, including 5 years supporting construction projects.</li><li>Strong semiconductor facilities and process systems design experience (Cleanroom HVAC, CHW, PCW, Exhaust, CDA, Vacuum, etc.).</li><li>Experience working in EPCM project environments.</li><li>Ability to review engineering drawings, specifications, and technical designs.</li><li>Experience in project execution, including cost control, scheduling, commissioning, and handover.</li><li>Strong knowledge of construction engineering practices within semiconductor or similar industries.</li><li>Excellent technical problem-solving and root-cause analysis skills.</li><li>Strong communication, stakeholder management, and cross-functional leadership abilities.</li><li>Ability to work effectively in a global, multicultural environment.</li><li>Ability to apply baseline digital fluency and AI literacy to utilize AI-enabled tools for engineering analysis, problem-solving, and operational efficiency</li><li>Highly Desirable / Preferred Skills or Experience</li><li>Professional certification or membership in a recognized engineering body</li><li>Experience working on semiconductor fab or large industrial projects</li><li>Experience in greenfield construction projects</li><li>Knowledge of sustainability practices in construction and facilities</li><li>Experience working across global or regional teams</li></ul>

Responsibilities: Policies and Procedures (10%) <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan; allocate function target to subordinates; and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.</li></ul> People Management (15%) <ul><li>Allocate and balance work across direct reports;&nbsp;</li><li>Review and provide timely performance feedback to direct reports;&nbsp;</li><li>Mentor, develop and motivate them;</li><li>Help resolve people/functional issues in the team;</li><li>Submit manpower application and interview the candidates; in order to achieve targeted department performance and retain key talent.</li></ul> Production (25%) <ul><li>Supervise and monitor the production activities and process;</li><li>Help to solve critical production issues;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support; in order to ensure the normal day-to-day production.</li></ul> Assembly (25%) <ul><li>Review the maintenance plan;</li><li>Monitor the maintenance plan execution;</li><li>Approve the Purchase Request for spare parts;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution; in order to ensure the normal operation of die and improve daily operating efficiency.</li></ul> Equipment maintenance (5%) <ul><li>Review the maintenance plan;</li><li>Monitor the maintenance plan execution;</li><li>Approve the Purchase Request for equipment and parts;</li><li>Provide overall equipment maintenance instruction and monitor the execution; in order to ensure equipment operate reliably and improve daily operating efficiency.</li></ul> Engineering (10%) <ul><li>Allocate new projects to engineers;</li><li>Monitor the new project process and control the cost and schedule;</li><li>Provide cross functions/departments coordination;</li><li>Help to solve critical technical issues; in order to ensure the successful completion of the project.</li></ul> EHS (5%) <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.</li></ul> Project Management and Activity (10%) <ul><li>To reduce the&nbsp;costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc</li></ul> Requirements: <ul><li>Bachelor and above Degree.</li><li>Good English skills (written and oral).</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions.</li><li>Solid Lean/6 Sigma knowledge and project experiences.</li><li>Familiar with quality system and tools.</li><li>Rich experiences in operator training and development.</li><li>Planning knowledge and experiences.</li><li>Proficient PC skills.</li></ul>

Responsibilities: SUPPORT CUSTOMERS AND DEBUG FIRMWARE <ul><li>Customer engineering support: Act as the primary technical escalation point for Security Firmware on SSD products — triage, prioritize, and drive customer reported security issues to closure within committed response times</li><li>Security feature enablement: Guide customers through the configuration, integration, and validation of SSD security features; including, but not limited to: TCG Opal/Pyrite/Ruby and Enterprise SSC, ATA and NVMe security commands, self-encrypting drive operation, secure boot and signed firmware update, sanitize and cryptographic erase, key management, and device attestation</li><li>Debug and root cause analysis: Reproduce customer, qualification, and field failures in the lab; analyze firmware logs, traces, and bus captures; debug Security Firmware source; and deliver documented root cause and corrective action</li><li>Firmware fixes and validation: Develop, unit test, and functionally validate targeted Security Firmware changes and customer specific configurations and builds, ensuring each change meets the security, functional, performance, and quality/reliability requirements of the technical spec matrix before release</li><li>Vulnerability and incident response: Assess the impact of reported vulnerabilities and security findings on products already in the field, and support mitigation planning, remediation delivery, and customer disclosure</li><li>Customer qualification and compliance support: Support customer security audits, security questionnaires, and certification activities (e.g. TCG specification compliance, FIPS 140-3, Common Criteria), and produce the application notes, integration guides, and technical documentation customers depend on</li></ul> STAKEHOLDER MANAGEMENT <ul><li>Represent our client in direct technical engagement with customer engineering teams, translating Security Firmware behavior, constraints, and risk into terms that are clear to both engineering and non-engineering audiences</li><li>Dedicatedly provide to management, multi-functional team members, and the firmware team consistent, detailed, and properly summarized information regarding customer issues, escalation status, and the progress of firmware fixes</li><li>Maintain accurate issue records, root cause reports, and knowledge base content so that recurring customer questions are answered faster over time</li></ul> PEOPLE DEVELOPMENT <ul><li>Multi-functional Teamwork: Develop and maintain collaborative, open and, constructive relationships with peers, management, and partner teams across firmware development, product engineering, quality, and field applications</li><li>Team Development: Provide technical capability that continuously improves team involvement, morale, and productivity</li><li>Personal Development: Work to continuously improve your technical capability and communication skills</li></ul> AI UTILIZATION <ul><li>Integrates AI-assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and requirements.</li><li>Contributes to a culture of continuous improvement by identifying, testing, and sharing AI-enabled enhancements within one’s scope of work.</li></ul> Requirements: <ul><li>Bachelors/masters degree in computer or electrical engineering with 5+ years of relevant experience.</li><li>Experience in a customer facing engineering role such as customer engineering support, field applications, sustaining engineering, or escalation management is strongly preferred</li><li>Embedded Security domain knowledge and experience, including cryptography fundamentals (AES, RSA/ECC, SHA), key management, secure boot, and secure firmware update</li><li>Familiarity with storage security standards and features such as TCG Opal and Enterprise SSC, ATA Security, NVMe security and sanitize commands, and self-encrypting drives is an advantage</li><li>Expertise in the use of programming languages (eg. C, C++, RUST), programming tools &amp; environments</li><li>Experience programming in Python for test automation, log parsing, and debug tooling is an advantage</li><li>Understanding of storage interfaces including ideally PCIe/NVMe, SATA, or SAS</li><li>Experience with NAND flash and other non-volatile storage is an advantage</li><li>Experience in storage industry, storage systems, or a related technology is an advantage</li><li>Proficiency in debugging and resolving code problems for firmware applications, including the use of debuggers, firmware trace and log analysis, and protocol analyzers</li><li>Experience with defect tracking, change control, and firmware release processes in a production or sustaining environment</li><li>Excellent written and verbal communication skills, with the ability to manage multiple concurrent escalations under time pressure and stay effective in customer visible situations</li><li>Ability to apply baseline digital fluency and role-appropriate AI literacy to use AI-enabled tools responsibly and effectively for research, analysis, content creation, problem-solving, operational tasks, and achieving business outcomes.</li></ul>

Responsibilities: <ul><li>Define and implement NAND Flash reliability test flows to assess product reliability performance and prevent extrinsic/intrinsic reliability escapes.</li><li>Perform high volume statistical data analysis to evaluate NAND DPM/ intrinsic reliability risks and trends.</li><li>Drive electrical failure analysis, including advance characterization, to identify root causes and solution spaces.</li><li>Develop short term countermeasures such as targeted stresses and screens, applying knowledge of digital/analog circuits, device physics, and process engineering.</li><li>Qualify the product with innovative control measures to provide best in Class DPM and Cell reliability.</li><li>Collaborate closely with Fab, NAND Technology, NAND Design, Product Development, System Development, and Quality/Reliability teams to develop solutions and enable shipment of high quality end products.</li></ul> Requirements: <ul><li>Bachelor’s degree&nbsp;with &gt; 10 years or Master’s degree&nbsp;with &gt; 7 years or PhD with &gt; 5 years&nbsp;of relevant experience in Electrical Engineering or related field.</li><li>Experience in Semiconductor Reliability, NAND Technology, and Electrical Failure Analysis.</li><li>In depth background in NAND Design, Device Physics, Circuits,&nbsp;Process, Test, Validation.&nbsp;</li><li>Experience with application of AI tools, LLMs ,&nbsp;data analysis tools (e.g., Python, JMP, Tableau)</li><li>Strong statistical analysis, communication, and problem solving skills.</li><li>Experience in leading cross functional projects and mentoring&nbsp;junior engineers.</li><li>Strong analytical and problem solving skills.</li><li>Team player and self driver.</li></ul>

Responsibilities: <ul><li>As a CMP Process Development Engineer, you will develop and optimize chemical mechanical planarization procedures. These procedures aim to improve product quality and reliability for the next generation of company memory parts.</li><li>Focus on understanding and improving the process margins required for meeting the mature yield goal for 3D NAND parts</li><li>Advanced 3D NAND CMP process development will include performing fundamental research, consumables development, and hardware evaluation, as well as testing processes for novel applications</li><li>Initiate and manage experiments to widen process margins as well as to evaluate manufacturability of next node solutions</li><li>Extensively collaborate with vendors to develop processes that meet integration requirements for current and next-generation 3-D NAND nodes</li><li>Incorporate best known manufacturing methods into early development phase of upcoming nodes</li><li>Design and implement advanced process monitoring and control methodologies</li><li>Provide strategic roadmap for N+, N++ and future NAND Nodes</li><li>Serve as a technical expert within company contributing to technical projects for improvements to processes, procedures, and equipment</li><li>Define and leads complex, multi-functional projects of critical importance to company, helps to define strategic direction</li><li>Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers</li><li>This position requires communication and collaboration with partners both locally and globally. Strict adherence to company Intellectual Property Protection policy is necessary</li></ul> Requirements: <ul><li>PhD with ≥5 years, or Master’s degree with ≥7 years, or Bachelor’s degree with ≥10 years of relevant experience in Electrical Engineering, Materials Science, Chemical Engineering, Physics, or a related field, with demonstrated expertise in semiconductor Experience in Chemical Mechanical Planarization (CMP) Process in 300mm wafer fabrication.</li><li>Hands-on experience CMP equipment operation such as AMAT (LKP), EBARA-300X and next generation CMP equipment, optical metrology, profilometry, polishing slurries, conditioners, and polishing pads</li><li>Experience in dielectrics/metals CMP process development on 3D NAND or other memory technology</li><li>Understanding of various integration and structural impacts and constraints related to film deposition and other upstream/downstream processes</li><li>An understanding of the general process steps and process flow for memory processing planar and vertical NAND memory.</li><li>Strong interest in Data science, modelling, and drive to use/adopt AI to optimize workflows.</li><li>Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.</li><li>Strong collaboration and communication skills (verbal and written).</li><li>Self-driven, adaptable, and able to manage multiple projects.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Proven ability to take calculated risks and execute novel solutions.</li><li>Recognized as a mentor, team player and technical expert with the ability to solicit feedback, accept input, and analyze success/failure.</li></ul>

Responsibilities: <ul><li>Collaborate with multi-functional network teams from PIE, Process &amp; Equipment Engineering, WLR, TD to improve product yields and reliability within your assigned process loop.</li><li>May require travel to global company sites to foster collaboration and drive execution.</li><li>Communicate module related issues to the Fab engineering and leadership teams.</li><li>Design, execute, and analyze experiments to improve fab process, yield, and quality.</li><li>Collect and interpret complex data to optimize Fab processes and increase yields.</li><li>Engage and/or lead cross-area engineering teams to tackle process issues.</li><li>Work closely with global partners to stay ahead of on module related topics and process alignment projects.</li><li>Collaborate with other PI module owners and sister fabs to drive business process alignment</li><li>Partner with IE, Process and Equipment Engineering and Production to better forecast and balance yield, output and process issues</li><li>Promote network synergy through improved benchmarking and standardization of known engineering best-known methods (BKMs), business process.</li></ul> Requirements: <ul><li>Bachelor’s or advanced degree in Engineering or Science is required</li><li>Strong analytical, logical, and critical thinking skills</li><li>Effective communicator, able to collaborate across all levels</li><li>Growth mindset with a passion for continuous learning</li><li>Internship or experience in the semiconductor industry is a plus</li><li>Demonstrated leadership and a track record of impact are highly desirable</li><li>Interest in and knowledge of the semiconductor industry and company is preferred.</li></ul>

Responsibilities: <ul><li>Enable technology ramp in high-volume production for CMOS and memory devices.</li><li>Improve device performance with a focus on variability reduction and robustness.</li><li>Support and execute design and test optimization to enhance manufacturability and performance.</li><li>Identify and implement process simplification and working methodology improvements.</li><li>Lead or actively contribute to cross-functional problem-solving for device, yield, and quality issues.</li></ul> Requirements: <ul><li>Minimum 5 years of relevant working experience is requiredA masters or Ph.Ddegree in Physics or Engineering areas is preferred.</li><li>Working experience in wafer fab process or process integration engineeringDirect experience in advanced CMOS device technology such as FinFET or GAA is preferable.</li><li>Proven knowledge in semiconductor physics and understanding of transistor operations, scaling limitations and reliability, basic knowledge of CMOS circuits and characterisation methods.</li><li>Understanding of wafer fabrication process areas, including tool sets, process mechanisms, tuning knobs, etc.</li><li>Excellent data analysis skills using software (JMP, SPOTFIRE, etc).</li><li>Strong task ownership, self-motivated to work with other team members to make progress collaboratively.</li><li>Open-minded attitude to learn new skills and could adapt to a new working environment swiftly.</li><li>Good digital literacy with MS OfficeProgramming capability such as Python is a plus.</li><li>Occasional international business travel is required for this position.</li></ul>

Responsibilities: Production Operations Management: <ul><li>Manage the day-to-day operations of the Stamping Department to ensure production plans are achieved and customer delivery requirements are met.</li><li>Plan and allocate production resources, monitor production progress, and promptly coordinate the resolution of operational issues.</li><li>Chair departmental GO meetings, production meetings, and operational reviews, and track performance against targets.</li><li>Monitor production data and operating metrics, driving problem resolution and implementation of improvement actions.</li><li>Review and approve production-related documents, forms, work instructions, and processes.</li></ul> Safety and Environmental Management: <ul><li>Implement company EHS policies and applicable regulatory requirements, and promote a strong safety culture.</li><li>Conduct regular workplace safety inspections and risk assessments, ensuring identified hazards are corrected and closed out.</li><li>Monitor employees safe work practices to reduce the risk of injuries and safety incidents.</li><li>Ensure effective implementation of 5S+1 and standardized workplace management.</li></ul> Quality Management: <ul><li>Take ownership of departmental quality performance and continuously reduce scrap rates and cost of poor quality (COPQ).</li><li>Drive process-quality improvements to prevent and reduce customer complaints and internal quality issues.</li><li>Lead analysis of quality issues and implementation of corrective and improvement actions.</li><li>Support customer audits, management-system audits, and management reviews.</li></ul> Continuous Improvement and Operational Excellence: <ul><li>Drive continuous-improvement projects involving OEE, QCO, VSM, automation, and related initiatives.</li><li>Apply (continuous improvement or lean improvement) tools to continuously improve production efficiency and resource utilization.</li><li>Promote digital management and visual management systems, and regularly track improvement-project progress.</li><li>Oversee key departmental improvement projects and coordinate the required resources.</li><li>Establish and advance initiatives for cost reduction, efficiency improvement, and waste elimination.</li></ul> Cost Management: <ul><li>Lead departmental budgeting and expense control.</li><li>Continuously drive cost-improvement projects to achieve annual cost-saving targets.</li><li>Optimize the utilization of labor, equipment, and materials.</li><li>Monitor departmental operating costs and return on investment.</li></ul> Team Management and Talent Development: <ul><li>Establish and maintain job-skill matrices to strengthen overall team capabilities.</li><li>Manage employee performance, talent development, and succession planning.</li><li>Guide and coach supervisors, team leaders, and key employees in their professional development.</li><li>Improve employee engagement and foster teamwork and organizational culture.</li><li>Coordinate the resolution of employee-relations and cross-team collaboration issues.</li></ul> Strategic Planning and Management Reporting: <ul><li>Develop annual departmental business objectives and action plans.</li><li>Cascade KPI targets throughout the organization and drive achievement at all levels.</li><li>Report departmental operating performance and improvement progress to management on a regular basis.</li><li>Participate in plant strategic planning and business-development projects.</li></ul> Cross-Functional Collaboration: <ul><li>Work closely with Quality, Engineering, Maintenance, Planning, Supply Chain, and other functions.</li><li>Support new-product introduction and capacity-planning projects.</li><li>Coordinate cross-functional resources to resolve major operational issues.</li><li>Drive improvement in overall plant operating performance.</li></ul> Requirements: <ul><li>15+ years of experience in the stamping industry preferred.</li><li>Bachelors degree with 5+ years of manufacturing experience; a major in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or a related discipline is preferred.</li><li>Strong knowledge of stamping processes, quality management, and equipment management.</li><li>Familiarity with or lean manufacturing tools.</li><li>Experience leading continuous-improvement projects.</li><li>Excellent team leadership and people-management skills.</li><li>Strong communication, coordination, and cross-functional collaboration skills.</li><li>Strong analytical and problem-solving abilities.</li><li>Project-management and continuous-improvement capabilities.</li><li>Data-analysis and business-management skills.</li><li>Results-oriented and customer-focused mindset.</li><li>Strong execution skills and strategic thinking.</li></ul>

Responsibilities: <ul><li>Good communicator, able to explain technical concepts to both technical and non-technical audiences and collaborate effectively with global internal teams and customers.&nbsp;</li><li>Establish key customer care abouts and contributes &amp; reviews the product requirements.</li><li>Conducts joint design reviews between company and customers during product development cycles to ensure product specifications are properly defined (Design Objectives).&nbsp;</li><li>Work with local FAE and product engineering teams on new concepts.</li><li>Develop expertise in how company products are applied based on Customer’s manufacturing processes. Translates customer’s assembly process to company product design teams, assisting with crafting company Application Spec documents. Collaborates early and aligns with customers on companys final Application Spec. Conducts signoff review between company and Customer for NPI products.</li><li>Works with company engineering to integrate customer application parameters into product and application specifications.</li><li>Creates application notes, training materials, or documentation to help customers understand how to use company products. Provides product application training.</li><li>Provides internal training to company product and FAE groups showing new process technologies that our customer base is utilizing or experimenting with for future development.</li><li>Assists customers with Test methodologies to test company products. Ensures company test methodologies are consistent with Customer’s requirements.</li><li>Provides onsite support during multiple NPI stages.&nbsp;</li><li>Ensured feedback is provided to design engineers.</li><li>Must understand the SMT processes, pick and place equipment, robotics, cable routing and general PCB processes and procedures.</li><li>Assess/collaborate with customer manufacturing teams during product design phase.</li><li>Troubleshoot technical issues that customers encounter with company products during trials and production.</li></ul> Requirements: <ul><li>BS or MS in Mechanical Engineering required, 6-10 years of experience – design/field.&nbsp;&nbsp;</li><li>Fluent in Mandarin, English will be an added advantage.&nbsp;</li><li>Experience with design reviews, tolerance analysis and root cause problem-solving.</li><li>Experience in PPAP and production startup.&nbsp;</li><li>Ability to assist the Quality group in understanding potential areas of concern and the ability to relay data back to the product design teams.</li><li>Knowledge of regulatory and compliance standards is related to interconnect.</li><li>Proficiency in Creo, Ansys, and test lab equipment.</li><li>Must be able to travel within South Asia mostly.</li></ul>

Skills

Industry

Location

Jobtitle

219 gas production engineer Jobs found

MGR II Qlty & Reliability Engineering

Senior Engineer, Global Facilities Central Engineering, Construction - Mechanical

Operations Manager

Principal/Staff Engineer – Firmware Development

Principal NAND Reliability Product Engineer

Staff/Principal Engineer - CMP Advanced NAND

Fronted End Central Process Integration Senior Engineer

MTS – FECOS CPIE Device

Stamping Manager

Customer Process Engineer(Mandarin Speaker)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

219 gas production engineer Jobs found

MGR II Qlty & Reliability Engineering

Senior Engineer, Global Facilities Central Engineering, Construction - Mechanical

Operations Manager

Principal/Staff Engineer – Firmware Development

Principal NAND Reliability Product Engineer

Staff/Principal Engineer - CMP Advanced NAND

Fronted End Central Process Integration Senior Engineer

MTS – FECOS CPIE Device

Stamping Manager

Customer Process Engineer(Mandarin Speaker)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.