General Manager – Mechanical Reliability

Reliability Engineer

Head - Engineering Design

Deputy General Manager - PV Module

Head of IoT

Subject matter Expert - Electronics

Quality Director

Contract Engineer

Manager Utilities & Maintenance

Mobile App Developer

ResponsIbilities : <ul><li>Maintaining 100 % compliance in SHEQ (Safety Health Environment &amp; Quality) requirements related to Mechanical rotary and static equipment and human safety aspects</li><li>Drive and Perform reliability / Safety Audit of Mechanical systems and related workflows. Define and follow up on the resulting actions.</li><li>Ensure Mechanical systems support is provided to the operating sites on timely manner.</li><li>Develop &amp; implement a strategy for the sourcing, replacement, engineering, maintenance and troubleshooting of mechanical systems. This includes:</li><li>defining which activities should be insourced or outsourced standardization of equipment and service providers (incl. rate contracts / Blanket orders etc)</li><li>identification, selection &amp; development of service providers</li><li>identification of obsolescence issues and planning &amp; execution of suitable upgrade &amp; exchange programs application and ongoing management of condition-based maintenance strategies and the associated data</li><li>Ensure that the competence of maintenance personnel for mechanical systems (internal or external) is assessed and gaps between the actual and the required competence are closed.</li><li>Ensure that maintenance for mechanical systems is adequate, cost efficient and in compliance to</li><li>Our client work processes</li><li>Review and approve mechanical scope of major turnarounds</li><li>Ensure the site teams get adequate expert support in emergency situations</li><li>Support the investigation of mechanical system related trips</li><li>Prepare the contingency plan template to be used at sites</li><li>Lead the root cause failure analysis for major incidents and repeated downtimes</li><li>Feedback learnings from incidents to Reliability Improvement team / POL</li><li>Reporting &amp; Performance Management</li><li>Review downtime reporting of mechanical system failures at sites in the region</li><li>Review internal and external maintenance costs and look for cost reduction opportunities</li><li>Review open actions for sites and track them to closure</li><li>Report implementation status of initiatives resulting from alerts, technical bulletins, Lessons from</li><li>Reliability events and directives</li><li>Modifications:</li><li>Review and/or approve all major modifications and configuration changes to the mechanical&nbsp;systems.</li><li>ensure update of the related plant documents in document management system after modification</li><li>Lead region implementation of initiatives resulting from alerts, Lessons From Reliability Events and directives</li><li>For regionally driven projects work with project management function to provide expert input to scope definition, costing &amp; scheduling etc. Testing and commissioning of major modifications of the existing mechanical systems including emergency situations</li><li>For mechanical systems of new plants or process units ensure that:</li><li>relevant requirements are defined and reviewed by members of the team</li><li>Mechanical system structures &amp; vendors are compliant with our client standards and specific project/site requirements team members participate in relevant project reviews and acceptance (incl. factory and site acceptance tests, handover of systems) respective team members and maintenance teams are trained to operate, maintain and</li><li>troubleshoot the new systems.all necessary documents are handed over, are of good quality and are stored in the our client Gas</li><li>Global Document Management system in a standardized way vendors &amp; service providers are aligned with our client maintenance teams for troubleshooting and service.</li><li>the Integrate new assets workflow is applied through the Country Cluster with respect to mechanical systems</li></ul> Requirements : <ul><li>Ability to lead and develop a distributed cross cultural multilocational team</li><li>Ability to take right decision based on facts under pressure</li><li>Establish and maintain collaborative authority with contractors/suppliers</li><li>Ability to influence/convince cross functional teams including superiors</li><li>Strong problem solving and project management skills.</li><li>Good negotiation skills</li><li>Excellent oral &amp; written communication skills in English language to explain and document reasoning for decisions</li><li>Experience in operating, maintaining, troubleshooting and design of rotary and static equipment and systems.</li><li>Experience with mechanical isolation and re-commissioning.</li><li>Knowledge of relevant mechanical equipment and systems.</li><li>Good background in mechanical safety with knowledge of hazards involved in operation and maintenance of rotary and static pressure and vacuum systems.</li><li>In depth-knowledge of predictive and preventative maintenance techniques including the use of EAM / SAP PM to manage these processes.</li><li>Familiarity with relevant national and international codes and standards.</li><li>Basic Knowledge of ASU / HYCO / CO2 plants including the associated hazards</li><li>Familiarity with Process &amp; Instrumentation (P&amp;I), logics and control loop diagrams with knowledge of control systems.</li><li>Experience in root cause failure analysis</li><li>Capability to do risk assessments and make calculated risk decisions</li><li>Experience in designing and building mechanical systems would be an advantage.</li><li>Experience of using Computerized Maintenance Management System</li><li>Bachelors / Masters degree in Mechanical Engineering or related subject.</li><li>12 - 15 years of experience in maintenance function of Air Separation / Fertilizer / Chemical / process plants</li></ul>

Overview: <ul><li>The Reliability Engineer will apply technical knowledge to deliver continuous improvement in process and asset reliability through the detection and elimination of defects.&nbsp;</li><li>In this role, you will partner with the team to ensure the fulfillment of reliability engineering strategies.</li></ul> Responsibilities: <ul><li>Implement moderately complex reliability excellence activities and identify and prioritize reliability engineering value creation opportunities.</li><li>Execute the development, design and installation of predictive maintenance programs and technology in alignment with the area procedures.</li><li>Prepare technical reviews of moderately complex projects and collaborate with related areas on new equipment reliability specifications.</li><li>Perform the identification and elimination of bad actors and the optimization of equipment availability.</li><li>Collaborate with and provide guidance to maintenance repairs and production in reliability related processes and the identification of critical spares.</li><li>Independently solve moderately complex issues with minimal supervision, while escalating more complex issues to appropriate staff.</li><li>Other duties as assigned</li></ul> Requirements: Minimum Qualification: <ul><li>Bachelor’s degree in a related field or equivalent experience</li><li>Minimum of two years of related work experience</li><li>Other minimum qualifications may apply.</li></ul> Preferred Qualification: <ul><li>BE Mechanical or Electrical with overall 9 plus years’ experience in reliability excellence.</li><li>Shall be able to work in CMMS, conversant on working out Asset framework, criticality ranking of assets.</li><li>Shall prepared and implement EMS (Equipment Maintenance Strategy)</li><li>Shall be able to work out RCM FULL (Reliability Centred Maintenance), scheduling, QPM.</li><li>Preparing and ensuring compliance to standard maintenance procedures, preventive, predictive maintenance schedules to increase machine uptime &amp; equipment reliability.</li><li>Address breakdown incidents in incident management system and conduct root cause failure analysis and capture lessons learned for system improvement.</li><li>Provide input for preparation of the Department/ Section budgets and assist in the implementation of the approved Budget and work plans to deliver Section objectives.</li><li>Ability to handle work force and impart training to the shop floor technicians and Engineers.</li><li>Shall have a good Management Information system.(MIS) related to Reliability Excellence.</li></ul>

Responsibilities: <ul><li>Engineering designs and processes - design, engineering analysis, prototypes, testing, process</li><li>Design systems and components that meet the needs &amp; requirements of the new products &amp; technologies</li><li>Identify, formulate and produce effective solutions to emerging problems/ requirements</li><li>Alter and modify design to meet requirements and to eliminate potential failures through design solutions</li><li>DFMEA and design analysis to build optimum designs. Test and evaluate theoretical concepts &amp; designs</li><li>Evaluate final product’s overall performance, reliability and safety</li><li>Product Packaging designs</li><li>Bill of Materials and BOM Costs</li><li>Manage the design data and issuance of controlled design documents</li></ul> Requirements:&nbsp; <ul><li>Working experience in mechanical design engineering</li><li>Clear understanding of core concepts like mechanics, kinematics, fluid dynamics, thermodynamics, materials science etc. and other design elements like GD&amp;T, production processes</li><li>Hands on fluency with 2D/ 3D engineering design and manufacturing tools like AutoCAD, ProE , Solidworks etc</li><li>Adept at product lifecycle management (PLM), Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)</li><li>Adequate knowledge of engineering analysis tools like ANSYS, ProMechanica or similar ones</li><li>Exposure to computer-aided engineering (CAE) and computer-aided manufacturing (CAM) is a desirable</li><li>Creativity and analytical skills</li><li>Ability to communicate technical concepts in a clear manner</li><li>Technical writing skills</li></ul>

Responsibilities: <ul><li>Responsible for PV module technology selection and product evaluation.</li><li>Reviewing new bids to check the PV modules technical requirements and identifies deviations for further communication with the client.</li><li>Preparing project-specific technical specifications for PV module including requirements mentioned by the client in RFQ’s.</li><li>Responsible for communicating with the module manufacturer on technical requirements and client’s deviation</li><li>To review IEC test reports, IEC certificates, and various reports before the finalization of the module vendor for the project.</li><li>To review and verify the BOM’s of the PV module with respect to IEC CDF for every project before the finalization of product and manufacturers</li><li>To review production reports received from the third-party inspection agencies and provides feedbacks on various testing results to quality team for MDCC approval.</li><li>Supporting Quality team in QAP preparation and in defining the various test plans, from manufacturing of PV modules to Site installations.</li><li>Prepares guidelines and scope of work for third-party inspection agencies specific to projects, especially for inspection and testing of PV modules.</li><li>Supporting PV module Quality team in various areas, like inspection and testing of PV modules at various levels of project.</li><li>Keeping information about new technologies of PV module and its road map.</li><li>To analyze PV module defects in case it is related to the product.</li><li>To analyze laboratory test reports of PV modules tested against the special requirement (LeTID, LID, PID, Accelerated aging tests, etc.).</li><li>Supporting the team in resolving technical queries raised by clients on the PV modules.</li><li>To prepare a project-specific requirement list for module certificates, test reports &amp; other required documents.</li><li>To follow-up with the module manufacturer for IEC certificates of new products.</li><li>To analyze PV module reports received from sites in case of failure of PV modules, for Hot spot, EL defect, BOM defects, low power etc.</li><li>Responsible for BIS certification.</li><li>Involved in BOM costing of module for new product development.</li><li>Responsible to do various reliability tests in laboratory on PV Modules and its report preparation.</li></ul> Requirements: <ul><li>Qualification should be Bachelor of Engineering - Mechanical Engineering&nbsp;</li><li>8-10 years of experience&nbsp;</li><li>Should have in-depth Experience with analytical analysis techniques in Solar Module manufacturing Technology, R&amp;D, Engineering, Product development, Equipment’s &amp; machinery Selection for PV manufacturing lines, PV Module Testing, </li><li>PV Module Design, Pre-Sales Technical, Reliability lab testing, new laboratory setup, PV module defect analysis (Specially Electroluminescence, IV, Thermography, Material degradation, Environmental testing of product). </li><li>Having in depth understanding of new technology PV modules, Bifacial, Mono PERC, TOPcon, N-type, Gallium doped cells, HJT, advanced interconnection technologies, new circuit designs etc. Having in depth expertise in PV module IV, EL, Thermography analysis, various reliability testing and degradation analysis. </li><li>Having in depth knowledge of Bill of Materials (BOM) used in PV modules. </li><li>Have worked on various International and domestic projects and having good exposures of PV module technical specifications. </li><li>Have good knowledge on the various type of defects found in the PV modules, like defects related to EL image, Hot Spot, LeTID, PID, de-lamination etc</li></ul>

Responsibilities:&nbsp; <ul><li>Responsible for designing product architecture &amp; schematic, hardware simulation, etc.</li><li>Developing design documents, product specification sheet &amp; product BOM</li><li>Designing schematics, PCB Design &amp; Architecture diagram to support development of given solution</li><li>development of hardware products starting from requirement analysis to system study, designing, components identification/procurement, prototyping, integration of units, documentation, and implementation</li><li>Identification of appropriate sensors as per product configuration for building the capabilities in the products for diagnostics &amp; data collection with digital/ analogue interfaces</li><li>Creating testing &amp; reliability plans, cases &amp; benches for conducting tests of hardware, electronic components at various stages as per the product design.</li><li>Compliance of the electronics designs &amp; components to relevant test protocols &amp; regulatory requirement</li></ul> Requirements:&nbsp; <ul><li>BE/ BTech in Electronics Engineering with 10-12 years’ experience or ME/MTech with 8-10 years of relevant industry and domain experience.</li><li>Possess thorough knowledge of Electronics Design &amp; standards for components and manufacturing processes including power component / logic circuits etc.</li><li>Strong abilities in creating, reading Schematics &amp; CAD work with proficiency in designing &amp; developing new products in conformance with pre-defined technical specificationsKnowledge of the vendor base/ Manufacturers of critical electronic and electro-mechanical components and sensors.</li><li>Significant hands-on experience and proficiency on Design, Development and testing of power supply circuits, Microcontroller based PCBA etc.</li><li>Exposure to electronic Manufacturing processes including PCB assemblies and testing.</li><li>Well versed with SMART product trends like IOT and high-end HMIs, displays etc relevant to consumer products with most recent experience on IOT, connected products and such designs.</li><li>Should have Good written / oral communication skills, inter-personnel skills and Self-motivation.</li><li>A good team player, capable of handling and motivating a team for successful project delivery</li><li>Possess good analytical skills and have flair for technical &amp; engineering aspects of product design</li></ul> Technical Skills:&nbsp; <ul><li>Deep knowledge on Microcontroller based design &amp; application knowledge, Mix signal Design, Analog &amp; Digital Circuit Design.</li><li>On Board Interface Protocols like I2C, SPI, CAN, UART, SD, LCD &amp; Memories</li><li>Communication Protocols like RS485, RS232, Ethernet, USB, Fibre-Optic, 11O7-Optical Communication &amp; ISDN-PRI</li><li>Wireless Protocols like RFID, Wi-Fi, Zig-Bee, GSM, NB-IOT</li><li>Testing Instruments like Spectrum Analyzer, LISN, ESD Gun, Digital Oscilloscope, Signal Generator, Digital Multi-Meter</li><li>Zuken CADSTAR, Altium, Mentor Graphics PADS, Xilinx ISE, Microsoft Visio, OrCAD &amp; PSPICE Simulation.</li><li>DFM &amp; DFT base design, Knowledge of reliability analysis DFMEA, MTBF, Good knowledge of EMI-EMC</li></ul>

Responsibilities: <ul><li>Responsible for designing product architecture &amp; schematic, hardware simulation, etc.</li><li>Developing design documents, product specification sheet &amp; product BOM</li><li>Designing schematics, PCB Design &amp; Architecture diagram to support development of given solution</li><li>Identification of appropriate sensors as per product configuration for building the capabilities in the products for diagnostics &amp; data collection with digital/ analogue interfaces</li><li>Creating testing &amp; reliability plans, cases &amp; benches for conducting tests of hardware, electronic components at various stages as per the product design.</li><li>Compliance of the electronics designs &amp; components to relevant test protocols &amp; regulatory requirements.</li><li>Project Management Activities.</li></ul> Requirements: <ul><li>BE/ BTech in Electronics Engineering with 10-12 years’ experience or ME/MTech with 8-10 years of relevant industry and domain experience.</li><li>Possess thorough knowledge of Electronics Design &amp; standards for components and manufacturing processes including power component / logic circuits etc.</li><li>Knowledge of the vendor base/ Manufacturers of critical electronic and electro-mechanical components and sensors.</li><li>Significant hands-on experience and proficiency on Design, Development and testing of power supply circuits, Microcontroller based PCBA etc.</li><li>Exposure to electronic Manufacturing processes including PCB assemblies and testing.</li><li>Well versed with SMART product trends like IOT and high-end HMIs, displays etc relevant to consumer products with most recent experience on IOT, connected products and such designs.</li><li>Should have Good written / oral communication skills, inter-personnel skills and Self-motivation.</li><li>A good team player, capable of handling and motivating a team for successful project delivery</li><li>Possess good analytical skills and have flair for technical &amp; engineering aspects of product design</li><li>Deep knowledge on Microcontroller based design &amp; application knowledge, Mix signal Design, Analog &amp; Digital Circuit Design.</li><li>On Board Interface Protocols like I2C, SPI, CAN, UART, SD, LCD &amp; Memories</li><li>Communication Protocols like RS485, RS232, Ethernet, USB, Fibre-Optic, 11O7-Optical Communication &amp; ISDN-PRI</li><li>Wireless Protocols like RFID, Wi-Fi, Zig-Bee, GSM, NB-IOT</li><li>Testing Instruments like Spectrum Analyzer, LISN, ESD Gun, Digital Oscilloscope, Signal Generator, Digital Multi-Meter</li><li>Zuken CADSTAR, Altium, Mentor Graphics PADS, Xilinx ISE, Microsoft Visio, OrCAD &amp; PSPICE Simulation.</li><li>DFM &amp; DFT base design, Knowledge of reliability analysis DFMEA, MTBF, Good knowledge of EMI-EMC</li><li>Skilled in the development of hardware products starting from requirement analysis to system study, designing, components identification/procurement, prototyping, integration of units, documentation, and implementation</li><li>Strong abilities in creating, reading Schematics &amp; CAD work with proficiency in designing &amp; developing new products in conformance with pre-defined technical specifications</li></ul>

Responsibilities: <ul><li>Set direction, strategies and manage the Supplier Quality Management, Quality Engineering, Failure Analysis QA, Customer Quality and Quality Management System departments.</li><li>Partner with Operations to establish, execute and maintain Quality strategies, Objectives and Processes.</li><li>Provide leadership and guidance to functional groups to improve processes and drive continuous improvement and advise other departments on matters of compliances.</li><li>Guide staff towards achievement of targets in term of personal and career development for individual as well as RF360 benefits.</li><li>Devise methods and strategies for Supplier Quality Management to support the operations effectively in controlling the quality performance of our material suppliers.</li><li>Set yearly target to develop material suppliers in meeting our quality objectives.</li><li>Device methods and quantifiable measurement in ensuring only good quality products are allowed to move and ship to customers.</li><li>Engage and be responsible actively with SQM, in-process quality Control production, and NPDI and TMS teams in delivering quality product to customer.</li><li>Together with production quality controller, NPDI, TMS and be responsible in timely disposition of questionable products and decision on quality releases to production or shipment to customers.</li><li>Organization of disposition including quarantine, release, stop ship or scrap decision on a timely manner to meet shipment demand.&nbsp;</li><li>Establish quality and reliability standard and test methods to ensure only good and reliable parts are shipped to customers.</li><li>Ensure effective corrective and preventive actions are in place for customer compliant received.&nbsp;</li><li>Manage and audit all activities to ensure compliance with internal, agreed customer’s specific requirements, corporate policies and ISO/IATF16949.</li><li>Develop training methods for ensure awareness of requirements are understood and practice in the factory.</li><li>Act as Key account holder for Company’s social corporate responsibilities for the plant</li></ul> Requirements: <ul><li>Master/Bachelor Degree in Science, electrical or mechanical engineering</li><li>At least 10 years of Quality/ Supplier Quality in manufacturing environment with min. 5 years of management experience and working in ISO regulated environment.</li></ul>

Overview: <ul><li>We are seeking a Contract Engineer to join our Global Manufacturing Admin Area.</li><li>The GM is responsible for providing the technical consultations, operational support and troubleshooting, benchmarking, building strategies, business planning, and conducting assessment in the areas of safety and environmental compliance, cyber security, advance process control and optimizations, energy and electrical efficiency, process engineering, reliability and maintenance, operational excellence etc.&nbsp;</li><li>GMSD is also instrumental to the implementation of digital transformation program</li><li>Your primary role will be to develop and prepare contracts for Turnaround Maintenance</li><li>It involves preparing contract packages including Requests for Proposals (RFPs), Preliminary Cost Estimate, Evaluation Criteria in line with approved contracting strategy and procurement manual.</li></ul> Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Coordinate and work closely with Turnaround Engineer / Planning team to prepare Requests For Proposals (RFPs) for Turnaround services.</li><li>Coordinate and prepare contract terms and conditions for the requested services for approved turnaround scope.&nbsp;</li><li>Prepare / develop Evaluation Criteria and preliminary cost estimate.</li><li>Coordinate and work closely with Contract Advisor to manage all activities related to bidding process.</li><li>Route contracts for signature, track work progress and submit regular reports.</li><li>Participate in Pre-qualification requirement and development of approved bidders list to maximize competition.</li><li>Participate in Job-Explanation meeting &amp; site visits with intended bidders.</li><li>Provide &amp; coordinate for clarifications, questions &amp; answers during bidding process.</li><li>Participate in evaluating offers, bid review team member, reviewing pre-award packages in line with approved contracting strategy and procurement manual.</li><li>Participate &amp; Coordinate Kick Off Meeting with the awarded contractor, establish deliverables for the contractors to be ready to fulfil the contract requirement.&nbsp;</li><li>Assist in preparing, developing and measuring Key Performance Indicators for contracting.&nbsp;</li><li>Maintain computer records of contract information and update all involved parties and stakeholders with current status of contracts and expectations of completion.</li><li>Assess contractor’s performance during the execution of work to ensure that all contractual requirements are being met.</li><li>Verify and review Contractors’ Proposed Variation Orders and submit a Variation Order Status Report.&nbsp;</li><li>Provide technical advice and guidance on contracting processes and related issues to Turnaround Team.</li><li>Assist in formulating and improving contracting strategies for turnaround in order to optimize cost and reducing risks in line with procurement manual.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Engineering (Mechanical / Electrical / Industrial).</li><li>You should have a minimum 10 Years of Experience in Turnaround, out of which at least 6 years in contracting.</li></ul>

Duties &amp; Responsibilities Location : PuneWant to build a stronger, more sustainable future and cultivate your career? Join our clients global team of 155,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in food ingredients and bio-industrial business, where we anticipate trends around taste, nutrition and safety to innovate and provide solutions to manufacturers, retailers and foodservice companies. Job Purpose and ImpactThe Utilities Maintenance and Reliability Manager will plan moderately complex maintenance on our plant assets and equipment following established program guidelines. In this role, you will work with contracted maintenance planners to develop unique job plans to improve the work force efficiency and quality by identifying the elements of an executable work package. You will oversee areas including boiler, air compressor, fire water, process water and process wastewater. You will also be working with operations to plan the maintenance of processing equipment to ensure maximum uptime, providing advanced knowledge of consistent maintenance and reliability best practices in the completion of planning and prioritizing moderately complex tasks. Key Accountabilities<ul><li>Research and compile information and feedback from crafts necessary to generate highly effective and detailed job plans.</li><li>Initiate the procurement of materials, special tools and unique items required in the job plans using relevant maintenance programs and database tools.</li><li>Transition capital improvement projects from project stage to operations and update information in the database to reflect the improvement, addition, or deletion of equipment and their associated spare parts and maintenance procedures.</li><li>Prepare and provide detailed job plans for moderately complex preventative maintenance activities that comply with fundamental plant maintenance procedures and practices.</li><li>Plan and schedule maintenance downtime and communicate cross functionally with technical and management teams to minimize production impact and improve reliability.</li><li>Maintain custom databases and computerized maintenance management system to support specific work projects and processes.</li><li>Engage in continuous improvement planning to enhance on time performance of technical activities.</li><li>Independently solve moderately complex issues with minimal supervision, while escalating more complex issues to appropriate staff.</li><li>Other duties as assigned #LI-MA3</li></ul> Position InformationRelocation assistance will be provided for this position. Qualifications <ul><li>Minimum of two years of related work experience</li><li>Bachelor’s degree in a related field or equivalent experience</li><li>Other minimum qualifications may apply</li><li>Experience with SAP</li><li>Knowledgeable within predictive and preventative maintenance practices</li><li>Ability to quickly learn and train in a hands-on environment</li><li>Experience with boiler systems, air compressors and clarifier systems.</li></ul>

Responsibilities: <ul><li>You will be a key contributor to the design, development and implementation of Mobile applications for large scale Building Automation Systems applications. This position will focus on new development of applications as well as maintenance and stewardship of existing applications. This position requires the ability to work under minimal direction in collaboration with a team of engineers to design and develop robust system solutions that meet defined system requirements.</li><li>We’re a collaborative bunch, so you’ll contribute to all phases of the SDLC, from design to implementation, testing and release</li><li>You will work closely with Scrum teams to deliver products on time with quality</li><li>You’ll also coordinate with leads to understand and maintain an in-depth understanding of the current and upcoming requirements for proposed releases</li><li>We work in a fast-moving agile set-up, so expect to pitch in with other responsibilities from time to time.</li><li>You should be hands-on working closely with your peers in development and testing to deliver to customer requirements. You will be responsible for below critical functions in helping we design leading products</li><li>Design and develop new features according to product functional specification and design requirements.&nbsp;</li><li>Able to co-ordinate with QA team on test plans and strategies.</li><li>Able to meet project plans for application development activities of a project; prioritizing work to accomplish demanding changes.</li><li>Ensuring defects are reviewed on a regular basis and resolved in the required timeframe</li><li>Must be aware and able to work in Agile, Incremental or spiral development methodology</li></ul> Requirements: <ul><li>BE/B.Tech/M.Tech/MCA</li><li>5-8 years relevant experience on Mobile development on Android and iOS platform</li><li>Must have experience in Android Java / Kotlin/Swift Languages&nbsp;</li><li>Must have experience in hybrid mobile app development i.e. React Native (JS/TS)</li><li>Unit-testing code for robustness, including edge cases, usability, and general reliability</li><li>Debugging / Bug fixing and improving application performance</li><li>Strong experience in dealing with different tools (Android Studio / XCode) and development methodologies (Agile, TDD)</li><li>Preferred knowledge of communicating with other devices peripherals over Bluetooth / NFC / RFID / WiFi / Other communication mechanisms.</li><li>Experience working with remote data via REST and JSON</li><li>Experience with third-party libraries and APIs</li><li>Must have ability to organize large-scale front-end mobile application codebases using common mobile design patterns</li><li>Continuously discover, evaluate, and implement new technologies to maximize development efficiency</li><li>Working knowledge of the general mobile landscape, architectures, trends, and emerging technologies</li></ul>

Skills

Industry

Location

Jobtitle

333 general manager – mechanical reliability Jobs found