QE Specialist

Senior Electrical Engineer

C# Developer (SSE)

Senior Systems Analyst – DotNet Developer Full stack

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

Responsibilities: <ul><li>Provide real-time QA oversight on the production floor, in warehouse areas, and during qualification activities.</li><li>Perform batch record and logbook review, ensuring accuracy, completeness, and compliance with GDP standards.</li><li>Execute and document line clearance and room readiness inspections prior to manufacturing activities.</li><li>Review qualification and validation protocols for clarity, compliance, and alignment with regulatory and internal quality expectations.</li><li>Support execution of qualification protocols by providing on-site quality presence during testing and ensuring deviations are properly documented and escalated. 6.	Initiate, investigate, and support closure of deviations, non-conformances, and CAPAs related to manufacturing and qualification activities.</li><li>Collaborate with cross-functional teams to ensure timely and compliant execution of commissioning, qualification, and validation activities.</li><li>Support the development and maintenance of site-specific quality procedures (SOPs, work instructions, forms) governing manufacturing, warehousing, engineering, maintenance, and validation operations.</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Maintain awareness of site policies, cGMP regulations, and evolving regulatory expectations applicable to sterile injectable operations.</li><li>Participate in internal walkthroughs, audit preparations, and readiness activities for regulatory inspections.</li><li>Support the implementation of continuous improvement initiatives and site quality metrics.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in a scientific, engineering, or technical discipline (e.g., Biology, Chemistry, Pharmacy, Engineering)</li><li>2–5 years of experience in quality assurance, manufacturing, or validation in a cGMP-regulated pharmaceutical or biotech manufacturing environment</li><li>Working knowledge of FDA, EU, and ICH guidelines related to sterile manufacturing, validation, and data integrity</li><li>Experience supporting commissioning and qualification activities is strongly preferred</li><li>Familiarity with GDP, batch record review, and deviation documentation processes</li></ul> Skills/Competencies <ul><li>Strong attention to detail and commitment to compliance</li><li>Solid written and verbal communication skills</li><li>Ability to work collaboratively across departments in a fast-paced environment</li><li>Comfortable supporting shop-floor activities and cross-functional execution teams</li><li>Proficient in using quality systems and document management tools</li><li>Flexible and adaptable to changing priorities and evolving project timelines</li><li>Commitment to data integrity, continuous improvement, and patient safety</li></ul>

Responsibilities: <ul><li>Meeting with the product engineers to determine product testing parameters.</li><li>Conducting quality assurance and designing performance tests using the new testing procedures.</li><li>Troubleshooting any errors and streamlining the testing procedures. Ensuring all tests and procedures meet company and industry standards.</li><li>Preparing test reports for management.</li></ul> Requirements: <ul><li>BS Degree in Engineering or Science, 5+ years’ experience related to primary job function, Electrical Engineering preferred.</li><li>Experience with software such as Altium, Ultiboard, Multisim, AutoCAD, Space Claim, Creo, and LabVIEW desirable.</li><li>Experience with solid state power switching highly desirable.</li><li>Familiarity with 270Vdc and 1000Vdc applications desirable.</li><li>Effective communication and presentation skills required.</li><li>Ability to maintain focus and complete tasks independently and on time.</li><li>This position requires access to information which is subject to stringent controls under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Candidates must be a U.S. citizen or national, U.S. lawful permanent resident, person granted asylee status in the U.S., or person admitted into the U.S. as a refugee.</li></ul>

Responsibilities: <ul><li>Develop distributed system architecture and system integration&nbsp;&nbsp;</li><li>Design event-driven applications leveraging microservices architecture on cloud platform&nbsp;</li><li>Carry out Model and assess complex IT solutions&nbsp;&nbsp;</li><li>Work closely with platform engineers and other IT professionals to choose compatible design solutions&nbsp;</li><li>Manage and comply with release management process&nbsp;</li><li>Analyze the scope and expected organizational impact of information systems&nbsp;</li><li>Evaluate existing systems and provide advice on how to meet organizational requirements&nbsp;</li><li>Ensure that the technical components of the project are in sync with the business needs of the organization&nbsp;</li><li>Ensure that information systems are secure from threat&nbsp;</li><li>Provide advice on project design, project costs, and expected benefit&nbsp;</li><li>Identifies technical debt and proactively recommends alternatives or improvements&nbsp;</li></ul> Requirements: <ul><li>University degree in Computer Science, Computer Engineering or related subjects preferred&nbsp;&nbsp;</li><li>8+ years of work experience building applications&nbsp;</li><li>Advanced understanding of IT infrastructure and enterprise architectures&nbsp;</li><li>Proven experience with microservices-based architecture&nbsp;</li><li>Proficiency in coding with modern programming languages such as C#, Python, or Node.js&nbsp;</li><li>API-first development experience&nbsp;</li><li>Experience with Cloud Computing (Azure preferable)&nbsp;</li><li>Extensive expertise in any modern document-oriented database, with a preference for MongoDB&nbsp;</li><li>Experience in developing components for Event-Driven Architecture, with a minimum of production-level experience using Event Hubs or Event Grid (or similar technologies like Kafka)&nbsp;</li><li>Experience working in an agile environment with a focus on engineering practices like testing, continuous integration, etc.&nbsp;</li><li>Good knowledge of virtualization&nbsp;&nbsp;</li><li>Analytics mindset with critical thinking and problem-solving skills&nbsp;</li><li>Fine knowledge of industry trends and emerging technologies&nbsp;</li><li>Fluent in English&nbsp;</li></ul>

Responsibilities: <ul><li>Primary responsibility is to develop applications which will be used by the operators/technicians in the manufacturing area globally by using .net platform.</li><li>Developing, testing, and maintaining software applications using .NET framework and related technologies.</li><li>Collaborating with cross-functional teams to gather and analyze requirements, and design and implement software solutions.</li><li>Maintain the existing applications and fix issues and explain the user about the timelines in resolving the issues.</li><li>Troubleshooting and debugging software issues, and providing timely resolutions.</li><li>Collaborating with peers to support/design the best solution possible.</li><li>Ensure error-free coding that adheres to best coding practices.</li><li>Implement best practices and methodologies for security, quality, and development approach.</li></ul> Requirements: <ul><li>Client is looking for a Full Stack Developers with 5 - 10years of experience in .net technology.</li><li>Strong written and verbal communication skills, with the ability to work effectively with US- based teams.</li><li>5+ years of recent hands-on experience developing ASP.NET Core and ASP.NET MVC applications.</li><li>Strong understanding of object-oriented programming (OOPs) concepts and software design principles.</li><li>Familiarity with the entire software development lifecycle (SDLC) and development methodologies.</li><li>Hands-on experience in database design, architecture, and integration.</li><li>Proficient with: WebAPI, Entity Framework, ADO.NET, SQL Server, HTML, CSS, JavaScript,jQuery, Ajax</li></ul> Preferred Qualifications: <ul><li>Knowledge in OSI Soft PI tools. - PIMS good to have</li><li>Basic SAP knowledge.</li><li>VB.net windows applications.</li><li>Blazor (server-side and/or WebAssembly) — experience building component-based UIs with Blazor</li><li>AngularJS — experience maintaining or migrating AngularJS single-page applications,VB.NET</li><li>Experience working with modern web technologies and frameworks; ability to evaluate and adopt appropriate tools for project needs.</li></ul>

Role Description: <ul><li>The QC Chemist will be a critical member of the laboratory team responsible for performing analytical testing to ensure the quality, safety, and compliance of sterile injectable IV bag products at a newly established greenfield pharmaceutical manufacturing facility.</li><li>This role will support the development, validation, and execution of analytical methods, ensure timely release of raw materials, in-process samples, and finished products, and maintain strict adherence to cGMP, FDA, and global regulatory standards.</li><li>The QC Chemist will play a key role in establishing laboratory operations during the startup phase and sustaining high standards of laboratory excellence throughout routine commercial production.</li></ul> Responsibilities: <ul><li>Perform analytical testing of raw materials, in-process samples, stability samples, and finished products using validated methods (e.g., HPLC, GC, UV-Vis, FTIR, TOC, etc.).</li><li>Develop and validate new analytical methods as required to support product development, regulatory submissions, and process optimization.</li><li>Ensure compliance with cGMP, FDA, USP, and other regulatory standards in all laboratory activities, documentation, and data integrity.</li><li>Prepare and review laboratory documentation including test protocols, reports, COAs, deviations, OOS investigations, and change control documentation.</li><li>Maintain laboratory instruments, perform routine calibrations, troubleshooting, and coordinate with vendors for preventive maintenance and repairs.</li><li>Support laboratory readiness for regulatory inspections, audits, and customer visits by maintaining audit-ready documentation and laboratory practices.</li><li>Assist in the preparation and execution of laboratory investigations, CAPA implementation, and root cause analysis for any analytical deviations.</li><li>Collaborate with cross-functional teams including Manufacturing, Quality Assurance, Validation, and Regulatory Affairs to ensure seamless batch release and product compliance.</li><li>Participate in training programs to ensure technical competency and adherence to evolving regulatory requirements.</li><li>Contribute to continuous improvement initiatives focused on laboratory efficiency, data integrity, and compliance robustness.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s or master’s degree in chemistry, Pharmaceutical Sciences, or related field.</li><li>3+ years of experience in pharmaceutical QC laboratory, preferably in sterile injectable manufacturing.</li><li>Strong hands-on experience with analytical instrumentation (HPLC, GC, UV, FTIR, etc.) and GMP-compliant laboratory operations.</li><li>Knowledge of FDA cGMP regulations, USP standards, ICH guidelines, and data integrity expectations.</li><li>Experience supporting laboratory investigations and regulatory inspections.</li></ul> Skills/Competencies: <ul><li>Strong analytical and problem-solving skills.</li><li>High attention to detail and accuracy in laboratory work.</li><li>Good understanding of data integrity and documentation practices.</li><li>Ability to work both independently and as part of a team in a dynamic startup environment.</li><li>Excellent organizational, time management, and communication skills.</li><li>Ability to adapt to evolving processes and regulatory requirements in a greenfield manufacturing setting.</li></ul>

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Responsibilities: <ul><li>Perform routine environmental monitoring (viable and non-viable) in classified cleanroom areas (Grade A/B/C/D), including surface and personnel monitoring. Manufacturing is performed inside isolators with surrounding grade C environment.</li><li>Collect and test samples from water systems (e.g., purified water, WFI), compressed gases, and other utilities per GMP and site procedures.</li><li>Support aseptic process simulations (media fills), including preparation, execution, and recovery/interpretation of microbiological data.</li><li>Perform microbiological tests such as bioburden, endotoxin (LAL), and sterility testing for raw materials, in-process samples, and finished products.</li><li>Prepare microbiological media, perform growth promotion testing, and maintain inventory of reagents and supplies.</li><li>Maintain laboratory notebooks, logs, and electronic systems in a compliant and organized manner, ensuring adherence to data integrity standards.</li><li>Support qualification and validation activities including cleanroom and utility qualifications, method validations, and EM qualification mapping.</li><li>Assist in investigations related to microbial excursions or deviations and contribute to the development and implementation of CAPAs.</li><li>Support microbiology lab startup activities including equipment qualification, SOP development, and execution of technical transfer protocols.</li><li>Follow all safety, quality, and regulatory policies, and maintain compliance with cGMP, USP, EU Annex 1, and other applicable guidelines.</li></ul> Requirements: Qualifications/Experience: <ul><li>Associate’s or bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>1–3 years of microbiology laboratory experience in a GMP-regulated pharmaceutical or biotechnology manufacturing environment.</li><li>Experience working in sterile environments or supporting aseptic processes preferred.</li><li>Familiarity with environmental monitoring equipment (e.g., particle counters, air samplers), microbiological techniques, and lab instrumentation.</li><li>Knowledge of cGMPs, data integrity principles, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li></ul> Skills/Competencies: <ul><li>Strong attention to detail and commitment to data accuracy and integrity.</li><li>Ability to work independently while collaborating effectively within a team</li><li>Good time management and organizational skills to support multiple tasks and priorities.</li><li>Proficient in the use of Microsoft Office and basic laboratory software systems.</li><li>Willingness to work flexible shifts or weekends to support aseptic operations and testing schedules, as needed.</li><li>A proactive and patient-focused mindset with a strong sense of ownership and compliance.</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Role Description: <ul><li>We are seeking a talented Mechanical Engineer to join our team in the food manufacturing industry.</li><li>The successful candidate will be responsible for designing, developing, and maintaining mechanical systems and equipment to ensure efficient and reliable production processes.</li></ul> Responsibilities: <ul><li>Conduct feasibility studies and cost analyses for new projects and equipment upgrades.</li><li>Oversee the installation, commissioning, and testing of new mechanical equipment and systems.</li><li>Troubleshoot and resolve mechanical issues to minimize downtime and ensure continuous operation.</li><li>Develop and implement preventive maintenance programs to extend the lifespan of equipment and reduce the risk of breakdowns.</li><li>Collaborate with cross-functional teams, including production, quality control, and safety, to ensure reliable operations.</li><li>Maintain accurate records of engineering activities, including design specifications, maintenance logs, and equipment status.</li><li>Provide technical support and training to maintenance and production staff.</li><li>Evaluate production line postures to develop strategies aimed at minimizing unplanned downtime, enhancing Mean Time Between Failures (MTBF), and reducing Mean Time To Repair (MTTR).</li><li>Led Natural Resources Conservation (NRC) initiatives to enhance sustainability within the plant.</li><li>Direct the implementation of Working Standards within the team’s capabilities</li></ul> Requirements: <ul><li>Engineering degree.</li><li>Minimum 1 year to maximum 4 years of work experience required.</li><li>Preferred Industry--FMCG, Manufacturing</li><li>Team Management experience is preferred but not mandatory to have.</li></ul>

Skills

Industry

Location

Jobtitle

86 hardware testing Jobs found

QE Specialist

Senior Electrical Engineer

C# Developer (SSE)

Senior Systems Analyst – DotNet Developer Full stack

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

86 hardware testing Jobs found

QE Specialist

Senior Electrical Engineer

C# Developer (SSE)

Senior Systems Analyst – DotNet Developer Full stack

QC Chemist

Senior Microbiology Technician

Microbiology Technician

Staff Software Engineer(Enterprise)

Staff Quality & Reliability Engineer

Mechanical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.