ASC - Control System DCS

ASC Safety Engineer

Product Stewardship Communications Specialist

Project Engineer (Process / Chemical)

Process Engineering -SAGO

Mechanical Piping Engineer

Chemical Engineer – Relief Systems Process Safety

ASC Environmental Coordinator

ASC Safety and Health Engineer

ASC Electrical Engineer

Responsibilities:Provide control system and instrumentation related technical support in Process control system activities, troubleshooting and recommend corrective actions to ensure having safely and reliably operate the facilities.Design, commission, test, configure, enhance and resolve Process control and instrumentation activities.Ensure security compliance of Process control and instrumentation activities. Additionally, analyzing relevant process data various control system for any process upsets investigation.Participate in any initiatives and studies includes but not limited to HAZOP, SIL Study, RCA analysis, innovation programs, operation excellence, knowledge sharing, self-development and others programs as required.Work with various vendors as needed to install, upgrade, update or implement new technologies for plant control and automation systems and instrumentation.Develop function and design specification for control system and instrumentationReview and validate vendors design documentations at all stage of assigned projects.Requirements:As a successful candidate you should have a BS in related engineering discipline to control system and instrumentation in relevant gas processing operation facilities in Oil/Gas Industry with (15) years of experience. You should have a recent experience with DCS and ESD (Yokogawa Centum VP / ProSafe-RS), Bentley Nevada VMS, compressor Controller (CCS), Turbine Control System (TCS) and control system security.atioYou should have excellent experience and knowledge in designing and updating/upgrading control system and strong knowledge of relevant codes and standards.

Responsibilities:Provide advice and consultation to department staff to assist them in maintaining a safe working environment in compliance with environmental/safety regulations, standards and practices.Identify and evaluate hazardous conditions and practices in the workplace.Provide advice and counsel concerning compliance with corporate safety regulation and procedures.Perform job site safety compliance inspections including hazard analyses and safe work procedures, and prepares written reports and recommendations.Measure and evaluate the effectiveness of the hazard control system, policies, and procedures and recommends changes that reflect improved opportunities to eliminate work place incidents and injuries.Prepare safety orientations, safety training, and job site inspection procedures and conduct specialized safety and environmental training programs to communicate hazard control information.Review and analyze injury, property damage, and statistical loss data and works with management to prepare comprehensive recommendations for corrective action to eliminate or minimize potential hazards.Incorporate essential safety requirements in all purchasing and contracting actions and recommend the purchase of safety equipment, related supplies, and personal protective equipment (PPE) in accordance with established company requirements.Requirements:As a successful candidate you will hold a Bachelor degree in engineering, safety engineering, industrial hygiene, or environmental science, or in a related field is preferred.You should have eight years of related safety/operational experience and/or training, preferably in the oil/gas or petrochemical industry, or in the industry related to the position placement, e.g., marine,pipelines, power distribution.You should have deep knowledge or training in occupational health, safety and environmental compliance with applicable industry, governmental and/or international standards.Must also have ability to assist with developing, implementing, and coordinating comprehensive health and safety programs.

Responsibilities:Assists in the planning, development, maintenance, and implementation of the SDS authoring process.Partners across all areas of expertise within the PSRA organization to monitor, promote, and deliver high quality, and fully compliant SDSs.Identifies key measures to assist in driving continuous improvements and adherence to applicable regulatory requirements.Actively fosters an organizational culture that is based on collaboration, partnership, innovation, customer service, driving change, and teamwork.SDS and label data maintenance for new and existing products, intermediates and experimental products. Position works under direct supervision as needed.Maintain regulatory and compositional information from raw materials suppliers and our businesses.Manage our translation process with a 3rd party vendor.Enter and maintain hazard assessment and regulatory data into product compliance support and MSDS authoring systems.Provide internal and external customer support related to hazard communication including SDS distribution.Actively participate in projects to continue to maintain compliance with global hazard communication regulations and related regulatory requirements.Use product compliance tools to retrieve/query production models, specifications, recipes, labeing information, global database searches.Support company Product Stewardship and Regulatory Affairs activities.Assist in special assignments and accepting new responsibilities as needed.Contribute to group projects by offering proposed solutions to problems and methods to accomplish the goals of the Product Stewardship and Regulatory Affairs GroupRequirements:Associate’s degree in Chemistry, Biological Sciences, Toxicology or HSE related field, computer technologies or equivalent experience in these fields.Minimum 5 years of experience, desired.Ability to multi-task and adapt to changing work priorities in a dynamic environmentStrong interpersonal skills required to facilitate team building and partnering with colleagues and peersDemonstrated ability to focus on details, work autonomously and lead projectsKnowledge of computers, word processing and spreadsheet software. Candidate will function using systems such as SAP, Sharepoint and Microsoft Office applications.SAP EHS module experience a plus.Results driven with excellent communication skillsAbility to handle multiple tasks/priorities and deal with ambiguity to meet specified deadlines.Good analytical, problem solving and organizational skills.Self-motivated, detail-oriented and comfortable working in a team environment.Experience with innovative methodology for capturing and identifying metrics of key performance indicators.

Responsibilities:You will be required to perform the following:Design and/or study of chemical modification to oil & gas processing, oil handling and utilizes facilities.Manage and execute capital projects according to the work scope, schedule and budget.Ensuring compliance to company standards, procedures, policies and agreed work specifications.Responsible for project development: preliminary engineering to detail designs to construction and the final and safe turnover to proponent.Manage General Engineering Services (GES) design contractor activities during the development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Develop and preparation of contracting plan and strategy for solicitation, evaluation and award of contract for detail engineering, procurement and construction.Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.Coordinate activities and resolve issues among proponents, contractors and other parties to allow construction activities to progress according to plan and final mechanical completion.Be part of critical review teams e.g. Design (30%/60%/90%), PHA / HAZOP, P&IDs, Flow Diagrams, Data Sheets, Procurement Requisitions, Vendor Data.Review and resolve day to day contractors’ claims and complaints related to assigned project work during construction and ensure HSE compliance.Fully understand contract documents (inclusive of appendices, drawings and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications and project schedule to support project manager and/or company representative in timely completion of project.Performs change order estimating and assists the Project Manager or Company representative in change order negotiations.Project Reporting and implementation of company initiatives during project execution. Review weekly and monthly reports on the status and progress of the contracts, including project costs and potential changes.Attend project meetings e.g. progress, stakeholders, design review, plot plan, value improvement.Assist in managing and reviewing the project progress i.e. planned vs actual. Review of project schedule, coordinating and monitoring the assigned project progress and challenge below par performance of the contractor.Review, coordinates and monitors invoices (claimed vs actual physical progress checks) and contractor’s submittals.Use of company systems and tools e.g. Sharek, CRM, SAP.Upholds engineering ethics and maintain high standards of professional behavior and conduct.Requirements:Engineering Design & Construction phase experience.Professionally Registered Engineer.As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized university; a higher degree is preferred.You will have Seven years of related experience, preferably in the oil industry or similar process industry.You should have experience in the support of both small and large scale capital projects.Work experience in GCC, Saudi Arabia or our client is a plus.You will be familiar with International Engineering Codes and Standards.You will have excellent English communication skills (verbal and written).Dynamic attitude towards project improvements and savings.PMP Certification is desirable but not mandatory.

Responsibilities:Handle process activities such as studies and design modifications in the operating facilitiesDevelop simulation models for assigned operation facilitiesDevelop, review and/or validate plant mass balancesCheck plant performance to ensure it is running up to its designLook for opportunities to optimize operations and implement them accordingly.Use the software simulation programs such as HYSYS and promax.Provide technical direction/support to in-Kingdom and out-of-Kingdom design contractorsFormulate and implement long-term strategies to improve operations and reduce costsLead groups of engineers in the shutdown and start-up phase of existing plants.Participate in standards reviews to assure inclusion of requirements that are of practical benefit to field operation and maintenance in regard to safety and efficiency of the plant.Provide guidance on standards development through technical committee participation. Interprets standards and recommends changes to reduce costs associated with overly stringent requirements.Lead unit performance and capacity tests and prepare testing proceduresConduct risk assessmentConduct process equipment performance test, for heat exchangers e.g. reboilers, fin-fan coolers, rotating equipment,Lead performance test for static equipment e.g. column, separator etc.Lead performance test for fired equipment and converters including catalyst performance.Lead driers break-through test and issue test result report including desiccant replacement plan.Lead propane refrigeration system performance testEvaluate the catalyst recovery performanceLead solution (DGA / TEG) filtration system performance test. Evaluate DGA/TEG monthly lossesIssue report covering bottlenecks, deficiencies, and recommendations and follow-up on the implementationLead process and equipment optimization studiesLead feasibility studiesLead PHA and HAZOP studiesInitiate and coordinate ESA'sDevelop implementation plan for critical recommendationsEnsure implementation plan is executed for the system under study and propagated to other applicable systems.Lead Health, Safety and Environmental studiesLead Energy Optimization / Conservation studiesInitiate process safety relief audit studies.Lead Water conservation studiesperform management of change (MOC)verify system operations and performance after implementing the recommendationsRequirements:As a successful candidate you should have a BS in Chemical Engineering with (10) years of experience in relevant gas processing operation facilities in Oil/Gas Industry, knowledge and experience in software simulation programs such as HYSYS and promax and strong knowledge of engineering practices and economic principles, calculation methods, design details, and aware about the processing codes and standards.You should have excellent experience and knowledge in design and modification, reviewing the standards and how to develop and evaluate studies

Responsibilities:Design or study mechanical modification to oil and gas processing, oil and gas handling and utilities facilities. Execute capital projects according to the work scope, schedule, and budget.Responsible for project development and completion: Preliminary engineering to detail designs to construction and the final and safe turnover to proponent.Design development of project proposal, include definition of project work scope and schedule requirements. Development of detailed estimate leading to funding appropriation and approval.Participate in HAZOP Studies, FEED review and Detailed Engineering.Manage contractor preparation of detailed design drawings, material specifications and procurement, and/or construction bid packages.Provide input to develop and prepare contracting plan and strategy for solicitation, evaluation, and award of contract for detail engineering, procurement, and construction.Review the project schedule, and coordinate and monitor the assigned project’s progress, and challenge below par performance of the contractor.Review and resolve day to day contractors’ claims and complaints related to the assigned project (mechanical) work during construction, and ensure HSE complianceEnsure compliance to company standards, procedures, policies, and agreed work specifications. Fully understand contract documents (inclusive of appendices, drawings, and specifications), project execution plan, interface management, change management, construction sequencing, standards specifications, and project schedule, to support the project manager and/or company representative in the timely completion of project.Project Report and implementation of company initiatives during project execution.Uphold engineering ethics and maintain high standards of professional behavior and conduct.Resolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Lead multiple concurrent projects, each potentially with one or more support engineersDevelop and apply piping material classes based on product and project requirementsSpecify insulation, paint, and protective coatings on Piping & Instrumentation Diagrams (P&ID)Select and specify manual valves and piping specialty itemsCreate and maintain internal specifications, work instructions, and job aidsResolve project management problems related to your area of expertise, including project planning deficiencies, project quality defects (in engineering, procurement, or construction), schedule slippages, and potential cost over runs.Develop and implement strategies to improve project planning, cost, schedule, and/or quality.Evaluate existing tools and methodologies in your area of expertise and make recommendations on your implementation.Conduct special studies in the field of Project Management.Participate in the reviews and evaluation of the capabilities of Engineering & Construction contractors, suppliers, and project management related service providers.Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractors companies to maintenance prior to field installation.Review detailed drawings and material specification from Layout Group for piping modifications as requested.Participate in HAZOP Studies, FEED review.Requirements:As the successful candidate, you will hold a bachelor's degree in Engineering from a recognized and approved program. A higher degree is preferred. Ideally a Professional Registered Engineer. PMP Certification is desirable but not mandatory.You will have seven years of related experience, preferably in the oil industry or similar process industry working in the engineering design and construction phase of projects.As a subject matter expert;You will have experience in the support of both small- and large-scale capital projects.You must be familiar with International Engineering Codes and Standards.You will have excellent English communication skills (verbal and written).You will have a dynamic attitude towards project improvements and savings.Experience in the GCC, Saudi Arabia, or is preferred Familiarity with standards preferred.You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software.Competencies :Plan & Organize.Analyze & Solve problems.Safety. Influence others.Communicating openly & effectively.Incorporate Technical Knowledge. Intercultural Awareness. Advanced Microsoft Excel Knowledge.

Responsibilities:Evaluate, design and document vessels for potential over pressure and vacuum scenarios (new & existing) – relief device (PSV, RD, conservation vents) relief load calculation, inlet and outlet line sizing, size selection and datasheet preparation, and relief/flare load summary preparation. Design, model, document, and communicate requirements for pressure/vacuum relief devices and effluent handling.Understanding of mechanical design conditions and to utilize the process safety information in designing relief system to safeguard piping and equipment.Understanding of HAZOP, PHA report, SIL studies - provide relief system input from these reports. Design of overpressure protection for gas/vapor filled systems using Depressurization concept. Material & Energy Balance Calculation as per the process requirement to design the adequate relief systems.Work to enhance safety and protection of the environment through overall relief project development.Stay abreast of corporate and industry relief practices and standards such as API 520/521, NFPA 30, API 2000 etcRequirements:3 to 8 years of direct Relief Systems experience in process design, commissioning, start-up, or operations.Demonstrated project management skills. Proficiency with Microsoft Office programsPrefer knowledge in application and compliance requirements of regulatory codes: US Occupational Health and Safety Administration, Internal Process Safety StandardsExperience in a petrochemical plant or refinery Experience with the following software would be an advantage: SuperChems, ASPEN, HTRI, AFT ARROW, AFT Fathom.Addition Required Qualifications/Job Requirements:Master’s or bachelor’s degree in chemical engineering from accredited university or college.Understand process flow diagrams, piping and instrumentation diagram and equipment layouts, conceptual equipment layouts, process layout, utility layout and other block layouts.Understand Plant process design with equipment sizing & utility load design calculation. Must have strong interpersonal, communication, collaboration, and consultation skills. This position will interact with personnel in all organizations.Ability to organize, prioritize, and execute a heavy workload simultaneously within budget and schedule.Must have the ability to communicate effectively through verbal and written means, and able to adapt communication to best reach the intended audience within or outside the organization.Strong customer focus, with demonstrated ability to solve complex issues and work in partnership with peers, Manufacturing, and other stakeholders.Ability to compile and analyze complex data.Knowledge in application of industry standards, recommended practices, and codes (API, NFPA, ASME, etc.)Ensure regulatory compliance of process changes- Provide and communicate clear, concise, and timely reporting of project progress and accomplishments verbally and in writing. 

Responsibilities:Implements the corporate environmental policy and monitors compliance, whilst staying current with all applicable Company and National environmental regulations, standards, procedures, and guidelines as well as all Saudi environmental, environmental health and industrial hygiene programs.This includes the supervision and coordination of local surveys and sampling, the interpretation of measurement results, and reviewing (and commenting) environmental aspects of contract documents as well as monitoring the environmental performance of contractor operations.Responds to concerns and requests for information from EPD, and obtains technical advice from EPD as needed. Provides regular input to management on KPIs and other indicators used to monitor environmental and health performance.Recognizes the process and techniques used to identify, analyze and manage environmental risks as a result of business operations.Organizes and participates in major surveys such as Environmental Performance Assessments (EPAs), Naturally Occurring Radioactive Material (NORM) surveys, Occupational Health Hazard Assessments (OHHAs), HAZCOM Assessments, Chemical Handling Assessments, Waste Management Compliance Audits, and Environmental Health surveys.Actively seeks to resolve any findings from these surveys.Provides follow-up information and updates reports to EPD as required.Coordinates all EMS-related activities within the organization as appropriate, including the development of environmental objectives and indicators, tracking of performance and costs, and record-keeping and reporting functions.Requirements:Bachelors degree (or higher) in Environment or in Chemistry, Biology, civil engineering with Environment related experience or MSc in EnvironmentOver 10 years in Oil and Gas industry environment related experience.Experience in handling projects/tasks related to waste management, water conservation, energy efficiency. EMS ISO:14001 certificated or Experience in leading/conduction EMS audits & other environment related auditsProficiency in English (Read and write)Proficiency in preparing & presenting environmental reports and presentations.

Responsibilities:Ability to work at pace as a Subject matter expert in complex and multi-stakeholder environment with strong influencing and interpersonal skills.Possess a strong knowledge of industrial standards and codes including SOLAS, MARPOL, API, and IOGP.Ability with proven experience to investigate industrial incidents to identify root causes utilizing a recognized RCA methodology (preferably Taproot) and developing corrective actions to prevent reoccurrence.Ability with proven experience to lead or facilitate Operational HSE risk assessments (i.e. SIMOP studies) utilizing recognized techniques such as HAZOP, Bow-tie, QRA etc.Provide experience of developing and auditing Safety and environmental management systems. Preferably certified lead auditor of ISO 45001 and 14001. Must have experience of bridging multi-stakeholder HSE management systems.Proven experience of developing and implementing emergency management system for highly hazardous multi-site operations (including offshore facilities).Requirements:BS degree in engineering, safety engineering, industrial hygiene, or environmental science, or in a related field is preferred.10 years of related safety/operational experience and/or training in the oil/gas industry (preferably 3 years offshore).knowledge or training in the following: occupational health, safety and environmental compliance with applicable industry, governmental and/or international standards.Must have demonstrated knowledge of delivering hands on health, safety and environmental training. Must also have ability to assist with developing, implementing, and coordinating comprehensive health and safety programs.Strong communication skills, both verbal and written (training/presentations/report writing).Strong PC skills in Microsoft Office (Word, Excel and PowerPoint). Skilled in the standards, concepts, practices, and procedures within the health, safety and environmental fields.

Responsibilities:Develop and maintain lifecycle management program and database for critical electrical equipment.Manage and maintain the corporate arc flash hazard mitigation program and conduct audits.Provide technical expertise and participate in failure investigations to capture the outcome and share with other facilities to avoid recurring electrical equipment failures.Develop and Manage centralized service contract for critical assets UPS, ATS, Battery Charger, Excitation, MV cables testing.Manage the Cogeneration assets performance and lead the technical programs, studies and assessments.Requirements:Bachelor’s degree of Electrical Engineering.Minimum 15 years of experience (20+ preferable) in refining/petrochemical industriesExperience performing electrical power system studies utilizing ETAP modeling (preferred)Familiarity with electrical maintenance and troubleshooting practices for industrial electrical systems.Experience with specification, application and maintenance up to 15kV class electrical equipment.Knowledge of power generation (cogeneration), power distribution and power automation (preferred).Fluent in English, oral and written.

Skills

Industry

Location

Jobtitle

37 hazard operability hazop Jobs found

ASC - Control System DCS

ASC Safety Engineer

Product Stewardship Communications Specialist

Project Engineer (Process / Chemical)

Process Engineering -SAGO

Mechanical Piping Engineer

Chemical Engineer – Relief Systems Process Safety

ASC Environmental Coordinator

ASC Safety and Health Engineer

ASC Electrical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

37 hazard operability hazop Jobs found

ASC - Control System DCS

ASC Safety Engineer

Product Stewardship Communications Specialist

Project Engineer (Process / Chemical)

Process Engineering -SAGO

Mechanical Piping Engineer

Chemical Engineer – Relief Systems Process Safety

ASC Environmental Coordinator

ASC Safety and Health Engineer

ASC Electrical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.