Compounding Technician

Filling Technician

Manufacturing Engineer II - CCD Support

Principal R&D Innovation Engineer

Operations Manager

Quality Engineer

Senior Systems Analyst – DotNet Developer Full stack

Docusign Developer

Senior Microbiology Technician

Production Supervisor

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills / Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications / Experience&nbsp; <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging. Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Overview: <ul><li>Design and developed electrical control system,testing and qualification introduce advanced electrical control technology with the objective of ensuring new assembly equipment meets schedule and requirements from customers and ECO within the direction of department manager and staff manufacturing engineer.&nbsp;</li><li>Manage and trouble shooting of CCD and cost saving within direction of policies.</li></ul> Responsibilities: <ul><li>Trouble shooting, Modify or Create Machine PLC program to suit the need of the plant.</li><li>Responsible for repair and maintenance of the CCD System of the production line.</li><li>PLC system of the automation debugging and improve the sequencing.</li><li>Suggest improvement of automation PLC program to improve productivity and OEE.</li><li>Train technician to resolve the issues encountered between the production.</li><li>CCD light adjustments to improve the performance.</li><li>Responsible to resolve all issues encounter during production run.&nbsp;</li><li>Support on resolving CCD issues encounter during production run and documenting.&nbsp;&nbsp;</li><li>Impart trainings and development for new joiners, Technical Trainees etc.</li><li>Review of deployment</li><li>Review ISO documents and update, Engage in ISO audits.</li></ul> Requirements:&nbsp; <ul><li>Bachelor in Major in Electrical/Electronics</li><li>5+ years’ experience and practitioner in the automation assembly and Tooling Design &amp; Development</li><li>Computer Knowledge, MS Office etc, SAP knowledge added advantage</li><li>Integrity, Accountability, innovation, Communication.&nbsp;</li><li>Strong background in PLC programming: capable of programming, debugging, editing, and creating new PLC logic.&nbsp;</li><li>Familiar with CCD (Charge-Coupled Device) cameras, especially those used in automated measurement systems (e.g., Autoline).&nbsp;</li><li>Experience with vision system programming tools such as Visco, Keyence, and Datalogic.&nbsp;</li><li>Solid programming skills required; CCD-specific knowledge can be trained.&nbsp;</li><li class="ql-align-justify">Willingness to work on Saturdays when needed</li></ul>

Responsibilities: <ul><li>In conjunction with sales and product management, engage and partner with customer innovators and influencers to understand their challenges, their needs, the value they provide, and their future requirements.</li><li>Analyze emerging technologies to identify potential technology integration and product opportunities.</li><li>Contribute to the creation and maintenance of technology roadmaps.</li><li>Collaborate with cross-functional teams to develop and refine new product concepts.</li><li>Define, coordinate, and execute technology development projects in line with the technology roadmaps.</li><li>Stay current with industry developments, competitive landscape, end users’ system architecture and industry standards.</li><li>Drives the spirit of innovation into the organization to design and launch differentiated products.</li></ul> Requirements:&nbsp; <ul><li>Bachelors degree in an Engineering discipline (Master’s degree, preferred).</li><li>12+ years’ relevant experience including new product development, technology development &amp; demonstration, and customer-facing or customer collaboration roles.</li><li>Ideal candidate will have a deep knowledge of the utility, industrial and renewable industries.</li><li>Demonstrated ability to think creatively and solve complex problems.</li><li>Possesses high degree of initiative, technical competence, hands-on experience and engineering process knowledge.</li><li>Excellent communication and presentation skills.</li><li>A professional level of business acumen.</li></ul>

Responsibilities: Policies and Procedures (10%): <ul><li>Develop and implement the manufacturing related policies and procedures in order to align with government regulation and corporate policy, organize the formulation of the responsibilities of management personnel at all levels, and optimize the internal structure and staffing.</li><li>Develop and implement assembly function budget and plan allocate function target to subordinates and monitor the achievement of the budget and overall performance in order to achieve targeted of Plant performance.&nbsp;</li></ul> People Management (15%): <ul><li>Allocate and balance work across direct reports&nbsp;&nbsp;</li><li>Review and provide timely performance feedback to direct reports&nbsp;&nbsp;</li><li>Mentor, develop and motivate them&nbsp;</li><li>Help resolve people/functional issues in the team&nbsp;</li><li>Submit manpower application and interview the candidates in order to achieve targeted department performance and retain key talent.&nbsp;</li></ul> Production (25%): <ul><li>Supervise and monitor the production activities and process&nbsp;</li><li>Help to solve critical production issues&nbsp;</li><li>Cooperate with other functions within molding department and other departments in getting necessary support in order to ensure the normal day-to-day production.&nbsp;</li></ul> Assembly (25%):&nbsp; <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for spare parts&nbsp;</li><li>Provide overall mold/Die/Tool maintenance instruction and monitor the execution in order to ensure the normal operation of die and improve daily operating efficiency.&nbsp;</li></ul> Equipment maintenance (5%): <ul><li>Review the maintenance plan&nbsp;</li><li>Monitor the maintenance plan execution&nbsp;</li><li>Approve the Purchase Request for equipment and parts&nbsp;</li><li>Provide overall equipment maintenance instruction and monitor the execution in order to ensure equipment operate reliably and improve daily operating efficiency.&nbsp;</li></ul> Engineering (10%):&nbsp; <ul><li>Allocate new projects to engineers&nbsp;</li><li>Monitor the new project process and control the cost and schedule&nbsp;</li><li>Provide cross functions/departments coordination&nbsp;</li><li>Help to solve critical technical issues in order to ensure the successful completion of the project.&nbsp;</li></ul> EHS (5%):&nbsp; <ul><li>Formulate and perfect the department EHS management system and operational procedures, and ensure the effective implementation.&nbsp;</li><li>Fully understand and implement EHS responsibilities to ensure EHS work in department meets relevant requirements&nbsp;</li><li>Set departmental and individual EHS performance targets according to laws and regulations and requirements of the company, and check and evaluate the completion of the targets regularly&nbsp;</li><li>Check the safety situation of production site regularly to eliminate all kinds of unsafe factors and prevent accidents.&nbsp;</li></ul> Project Management and Activity (10%):&nbsp; <ul><li>To reduce the costs and improve efficiency of the department, organize and plan key improvement projects, and monitor the implementation of these projects (Tebit Saving, Kaizen)&nbsp;</li><li>In order to improve and cooperate with the plant in implementing the excellent operation objectives, actively participate in training and use tools for improvement, such as VS Transformation, CCF, etc.</li></ul> Requirements: <ul><li>Bachelor and above Degree&nbsp;</li><li>Good English skills (written and oral)&nbsp;</li><li>Min. 10 years shopfloor management experiences in elec. Industry, above two years on managerial positions&nbsp;</li><li>Solid Lean/6 Sigma knowledge and project experiences&nbsp;</li><li>Familiar with quality system and tools&nbsp;</li><li>Rich experiences in operator training and development&nbsp;</li><li>Planning knowledge and experiences&nbsp;</li><li>Proficient PC skills.</li></ul>

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Primary responsibility is to develop applications which will be used by the operators/technicians in the manufacturing area globally by using .net platform.</li><li>Developing, testing, and maintaining software applications using .NET framework and related technologies.</li><li>Collaborating with cross-functional teams to gather and analyze requirements, and design and implement software solutions.</li><li>Maintain the existing applications and fix issues and explain the user about the timelines in resolving the issues.</li><li>Troubleshooting and debugging software issues, and providing timely resolutions.</li><li>Collaborating with peers to support/design the best solution possible.</li><li>Ensure error-free coding that adheres to best coding practices.</li><li>Implement best practices and methodologies for security, quality, and development approach.</li></ul> Requirements: <ul><li>Client is looking for a Full Stack Developers with 5 - 10years of experience in .net technology.</li><li>Strong written and verbal communication skills, with the ability to work effectively with US- based teams.</li><li>5+ years of recent hands-on experience developing ASP.NET Core and ASP.NET MVC applications.</li><li>Strong understanding of object-oriented programming (OOPs) concepts and software design principles.</li><li>Familiarity with the entire software development lifecycle (SDLC) and development methodologies.</li><li>Hands-on experience in database design, architecture, and integration.</li><li>Proficient with: WebAPI, Entity Framework, ADO.NET, SQL Server, HTML, CSS, JavaScript,jQuery, Ajax</li></ul> Preferred Qualifications: <ul><li>Knowledge in OSI Soft PI tools. - PIMS good to have</li><li>Basic SAP knowledge.</li><li>VB.net windows applications.</li><li>Blazor (server-side and/or WebAssembly) — experience building component-based UIs with Blazor</li><li>AngularJS — experience maintaining or migrating AngularJS single-page applications,VB.NET</li><li>Experience working with modern web technologies and frameworks; ability to evaluate and adopt appropriate tools for project needs.</li></ul>

Responsibilities: <ul><li>Design, develop, and maintain integrations with DocuSign CLM+ and eSignature APIs.</li><li>Implement and customize contract lifecycle management workflows.</li><li>Develop robust backend components using Java and C# to support business logic and integrations.</li><li>Work with XML and XSLT for document transformations and data interchange.</li><li>Build and manage stored procedures, packages, and triggers using Oracle PL/SQL.</li><li>Utilize Eclipse for Java development and Visual Studio for C# development.</li><li>Configure and support CI/CD pipelines using Azure DevOps.</li><li>Collaborate closely with business analysts, architects, QA, and infrastructure teams.</li><li>Troubleshoot and resolve integration and application issues across environments.</li><li>Create and maintain technical documentation and contribute to best practices.</li></ul> Requirements: <ul><li>8+ years of experience in enterprise application development.</li><li>Proficiency with DocuSign CLM+ (contract templates, workflow design, API integration).</li><li>Strong experience with DocuSign eSignature API and embedded signing flows.</li><li>Solid programming skills in Java and C#.</li><li>Expertise in XML and XSLT for document parsing and transformation.</li><li>Strong knowledge of Oracle Database and PL/SQL development.</li><li>Experience using Eclipse IDE and Visual Studio for software development.</li><li>Hands-on experience with Azure DevOps for version control, CI/CD pipelines, and environment management.</li><li>Strong analytical, communication, and problem-solving skills.</li></ul>

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Responsibilities: <ul><li>Supervise daily manufacturing operations including formulation, filling, and packaging of sterile injectable IV bag products within cleanroom environments utilizing isolator technology.</li><li>Manage and develop production team members, providing coaching, training, and performance feedback to ensure adherence to standard operating procedures (SOPs) and quality expectations.</li><li>Author, review, and approve SOPs, batch records, and other production documentation to ensure compliance with cGMP and regulatory requirements.</li><li>Ensure compliance with cGMP, FDA, DEA, OSHA, and other regulatory requirements, particularly in handling high potent APIs and controlled substances.</li><li>Coordinate production schedules to meet demand and support planning, warehouse, and materials management functions.</li><li>Monitor key performance indicators (KPIs) for productivity, quality, and safety; implement corrective and preventive actions as needed.</li><li>Oversee line clearance, equipment setup, and cleaning activities, ensuring readiness for manufacturing operations and minimizing downtime.</li><li>Support deviations, investigations, and CAPA implementation in partnership with Quality Assurance and other support functions.</li><li>Drive continuous improvement initiatives to enhance operational efficiency, product quality, and operator engagement.</li><li>Ensure effective communication between production shifts and other departments to maintain smooth and efficient operations.</li><li>Maintain a strong safety culture, ensuring compliance with Environmental Health &amp; Safety (EHS) programs and best practices.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in engineering, Life Sciences, or a related technical field preferred; equivalent experience considered.</li><li>Minimum of 3–5 years’ experience in pharmaceutical or biotechnology manufacturing, preferably in sterile or aseptic operations.</li><li>Supervisory experience leading production teams in a regulated environment.</li><li>Knowledge of cGMP, aseptic processing, and isolator-based manufacturing.</li><li>Experience with high potent APIs and/or controlled substances preferred.</li><li>Proficiency with production documentation, batch records, SOP authoring, and deviation processes.</li></ul> Requirements: Skills / Competencies: <ul><li>Strong leadership and team management skills with a focus on employee development.</li><li>Excellent organizational and problem-solving abilities.</li><li>Ability to manage multiple priorities in a fast-paced, dynamic environment.</li><li>Clear, concise communication skills (written and verbal).</li><li>Proficiency in Microsoft Office and familiarity with manufacturing execution systems (MES) or ERP platforms.</li><li>Commitment to data integrity, safety, and continuous improvement.</li></ul>

Skills

Industry

Location

Jobtitle

88 instructional technology Jobs found

Compounding Technician

Filling Technician

Manufacturing Engineer II - CCD Support

Principal R&D Innovation Engineer

Operations Manager

Quality Engineer

Senior Systems Analyst – DotNet Developer Full stack

Docusign Developer

Senior Microbiology Technician

Production Supervisor

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

88 instructional technology Jobs found

Compounding Technician

Filling Technician

Manufacturing Engineer II - CCD Support

Principal R&D Innovation Engineer

Operations Manager

Quality Engineer

Senior Systems Analyst – DotNet Developer Full stack

Docusign Developer

Senior Microbiology Technician

Production Supervisor

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.