Production Supervisor

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Senior Manager-Advanced Quality Engineering

Account Executive

Territory Sales Executive

Responsibilities: <ul><li>Plan and analyze the WIP, resources and activities in ensuring line continuity.</li><li>Effective line management and lot movement to meet OTD.</li><li>Coordinate with planner in production schedule to maximize the line utilization.</li><li>Implement effective work methodologies to ensure consistently high-quality output and productivity.</li><li>Together with engineering team, effective execution of assigned WI, SOP and target.</li><li>Drive together with Engineers in minimizing scraps and mishandling in the line.</li><li>Establish cross-training plans and proper certifications and re-certifications for respective team.</li><li>Responsible for managing the shift manpower and achieving the turnover target.</li><li>Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.</li></ul> Requirements: <ul><li>Minimum a Diploma/Degree in Electronic or Electrical Engineering or equivalent.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>Strong organizational, leadership and interpersonal skills.</li><li>Able to multi-task, set priorities and meet deadlines.</li><li>Experienced with computer systems and proficient with software applications such as MS Power Point, Excel and Word.</li><li>Ability to perform 12 hours shift</li></ul>

Responsibilities: <ul><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce online controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and teamwork.</li><li>Ensure non-conformance is dealt with in a proper and effective manner.</li><li>Establish, review and perform regular update of FMEA, OCAP, Process control, Risk Assessment and SIPOC on all critical processes to ensure a robust process.</li><li>Compliance with CSR, EHS, QM, ESD, 5S standard and cleanroom protocol.</li></ul> Requirements: <ul><li>Minimum bachelor’s degree in physics / chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>WET Process experience on Wet Etch, WET Resist Strip /Lift off (Single wafer lift off) , Wafer cleaning processes.</li><li>Able to lead and Guide Junior Engineers.</li><li>Able develop new process based on process requirements.</li><li>Good knowledge of wafer fab manufacturing processes, equipment and materials and capable of applying them effectively at work.</li><li>Experience with Microsoft applications.</li></ul>

Responsibilities: <ul><li>Process owner of dry etch/plasma ashing equipment</li><li>Drive cost reduction, weed out unwarranted expenses/wastages, find alternative sources and improve processes with innovative solutions to raise efficiency.</li><li>Drive quality investigations and continuous improvement programs to resolve chronic process and quality issues, and institute permanent resolutions to assure product quality and enhance process robustness.</li><li>Enforce on line controls and execution to conform to work instructions and procedures. Apply hands-on and with deep involvement at work.</li><li>Coach, guide and train engineers and technicians in processes and problem solving and analysis to build up their technical competencies and achieve self-sustenance.</li><li>Take accountability of work and possesses strong sense of responsibility and team work.</li></ul> Requirements: <ul><li>Minimum Bachelor’s degree in Physics / Chemistry / Material Science/ Electronic or Electrical Engineering or equivalent.</li><li>Minimum 4 years of related work experience in wafer process engineering and/or equipment maintenance.</li><li>Experience in high volume production of electronics components in an MNC or semi-conductor industry.</li><li>Possess strong technical competencies in his field of study.</li><li>Good knowledge of statistical and quality tools.</li><li>Able to work under pressure and with strong commitment at work.</li><li>Experience with software applications such as MS Power Point, Excel and Word.</li></ul>

Responsibilities: <ul><li>Develop, maintain, and deploy FDC models to monitor equipment health, detect process faults, and identify abnormal tool or process behavior.&nbsp;</li><li>Design and implement R2R control solutions using feed-forward and feedback strategies to improve recipe control, metrology target achievement, and process stability.</li><li>Deploy, validate, standardize, and scale APC/FDC/R2R models and methodologies across production tools, processes. Collaborate with global teams to standardize APC methodologies across manufacturing sites.</li><li>Design and deploy predictive maintenance models to detect early signs of degradation, anomalies, and potential failures of tools.</li></ul> Requirements: <ul><li>Bachelor’s Degree in Computer Science or&nbsp;Electronic/Electrical Engineering, with preferably min. 2 years’ experience in semiconductor field</li><li>Experience deploying production FDC and/or R2R solutions is an added advantage</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Foundational knowledge of machine learning models, algorithms, mathematics, and statistics is preferred.</li><li>Excellent knowledge of applying manufacturing statistics, preferably in Semiconductor industry.</li><li>Dynamic, initiative, resourceful, team player and highly self-motivated individual.</li><li>Strong organizational, leadership and interpersonal skills. (Senior/Staff)</li><li>Strong analytical mind. (Senior/Staff)</li></ul>

Responsibilities: <ul><li>Developing and executing account strategies to meet revenue targets and increase market share for automotive connectors and other key product folio</li><li>Focus on spec in company part into customer new project</li><li>Drive, report, monitor key metrics to achieve sales KPI which aligned with organization goal, which are new business wins (TERP), Revenue achievement and margin</li><li>Building and maintaining strong relationships with existing clients, including regular communication</li><li>Identifying and pursuing new business opportunities with potential clients in the appliance industry for 5 years revenue pipeline</li><li>Drive new business with customer engineer &amp; purchasing through sales &amp; marketing activities plan</li><li>Maintaining up-to-date knowledge of industry trends, competitors, and customer needs to drive sales growth</li><li>Collaborating with cross-functional teams in ASEAN and Global team, including sales, customer service, engineering, production, and quality assurance, to ensure consistent delivery of high-quality products and services, and other Sales KPI</li><li>Negotiating pricing, contracts, and delivery terms with clients to maximize profitability and customer satisfaction</li></ul> Requirements: <ul><li>Bachelor’s Degree required, preferably in Engineering education</li><li>High degree of integrity, Teamwork, Innovation and Accountability</li><li>Language: Excellent in English. Chinese is an advantage</li><li>Able to work in cross cultural especially in ASEAN countries and travelling</li><li>Preferably at least 5 years in sales or related field automotive industry (harness maker production field)</li><li>Customer service orientation</li><li>Demonstrate ability to collaborate cross functionally, cross regions</li><li>Strong verbal and written communication skills including presentation and computer skills (i.e. Power Point, Excel, Word, Salesforce, SAP and other tools)</li><li>Must be ambitious, exhibit strong results-orientation and execution characteristics</li><li>Ability to effectively organize, prioritize and accomplish multiple conflicting tasks, make intelligent, timely decisions and solve problems independently</li><li>Ability and willingness to travel as required, Domestic/ Overseas, 25% is travelling</li></ul>

Responsibilities: <ul><li>Interact with stakeholders regarding tasks, requirements, and clarifications.</li><li>Estimate the work received from stakeholders and align deliverables with the committed timelines.</li><li>Prepare 3D models and 2D drawings in accordance with our client standards.</li><li>Handle basic stamping design and stamping process related activities.</li><li>Demonstrate a proactive approach and apply lateral thinking to solve problems and improve processes.</li><li>Manage work hours and maintain accurate records of tasks and deliverables.</li></ul> Requirements: <ul><li>2 to 4 years of relevant experience.</li><li>Proficient with CAD software – 3D modelling, 2D drafting, and assembly.</li><li>Proficient with MS Office tools.</li><li>Knowledge of basic stamping design and stamping processes.</li><li>Basic knowledge in manufacturing processes.</li><li>Good communication skills for stakeholder interaction; proactive and capable of lateral thinking.</li></ul>

Responsibilities: <ul><li>Perform evaluations and/or analyze unique problems that are new to equipment.</li><li>Perform predictive maintenance by analyzing routine failures and determining adjustments and repairs that need to be made.</li><li>Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime.</li><li>Monitor equipment operations to ensure proper usage.</li><li>Construct and/or assemble new equipment</li><li>Troubleshoot equipment failures and repair as needed</li><li>Perform specified preventative maintenance on production equipment to prevent equipment downtime</li><li>Perform Lock Out / Tag Out requirements.</li><li>Work from blueprints, manuals, sketches and verbal instructions.</li><li>Help repairing on hydraulic, pneumatic and electromechanical systems.</li><li>Perform other duties as assigned or necessary to meet business conditions or changes.</li><li>Adheres to quality and safety systems or maintenance of quality and safety standards.</li></ul> Requirements: <ul><li>Good communication skills, both oral and written</li><li>Min 1-3 years experience in manufacturing.</li><li>Ability to work independently</li><li>Must have good or corrected eyesight to insure quality of work</li><li>Ability to lift and carry 25 kg frequently</li><li>Ability to crouch, crawl, climb ladders, and work at various heights</li><li>Good basic math skills</li><li>Good mechanical aptitude, and troubleshooting ability</li><li>Must have a valid drivers license</li></ul>

Responsibilities: <ul><li>Implement quality planning and controls for prototype/sample builds; manage build documentation.</li><li>Conduct Measurement System Analysis (MSA) for inspection systems and gauges.</li><li>Analyze samples and quality issues during development; drive corrective actions.</li><li>Ensure design verification and product qualification testing prior to project Gate 5.</li><li>Perform Process Capability Studies to support Final Tool Approval (FTAR) using CTAR methodology.</li><li>Establish and maintain quality controls and documentation for production environments.</li><li>Monitor process capability and oversee corrective actions as needed.</li><li>Approve measurement and cosmetic inspection criteria.</li><li>Support internal and external audits, including customer quality system audits.</li></ul> Requirements: <ul><li>Bachelor’s degree in Electrical, Mechanical Engineering, or related field.</li><li>10+ years of experience in quality control, preferably in cable assemblies, connectors, sockets, or similar industries.</li><li>Strong leadership capability and experience in managing people leaders across cultures.</li><li>Strong communicator with excellent written and verbal English skills.</li><li>Able to communicate effectively across all levels of the organization.</li><li>Trainer of quality tools and methodologies, with experience delivering workshops or coaching teams.</li><li>Deep understanding of ISO 9001, SPC, FMEA, MSA, and 7 QC tools.</li><li>Proficient in Statistical Process Control and Design of Experiments (DOE).</li><li>Demonstrated knowledge and experience with APQP methodology and requirements.</li><li>Familiarity with Model-Based Dimensioning (MBD) and GD&amp;T standards.</li><li>Expertise in EIA-364 test procedures.</li><li>Certified Internal/External Auditor; Six Sigma Black Belt preferred.</li><li>Skilled in quality software tools such as Minitab or JMP.</li><li>Strong organizational skills, strategic planning ability, and customer focus.</li><li>Proven ability to build effective cross-functional relationships and drive results.</li></ul>

Responsibilities: <ul><li>Drive year-over-year sales growth within the assigned North Italy territory</li><li>Develop and execute strategic sales plans for residential HVAC OEM customers</li><li>Build and maintain strong relationships with key decision makers across customer organisations</li><li>Identify new business opportunities and grow existing accounts</li><li>Promote sustainable and low-GWP refrigerant solutions (e.g. CO2, R290, A2L)</li><li>Collaborate with internal teams across sales, engineering, and product management</li><li>Maintain accurate pipeline management, forecasting, and reporting</li><li>Deliver customer presentations and value-based selling approaches</li><li>Manage full sales lifecycle from prospecting through to deal closure</li></ul> Requirements: <ul><li>Proven experience in sales, account management, or business development</li><li>Experience within HVAC, refrigeration, or residential heating/cooling markets preferred</li><li>Strong commercial acumen and ability to manage complex sales cycles</li><li>Ability to develop and execute territory and account strategies</li><li>Excellent communication and stakeholder management skills</li><li>Ability to work across different cultures and manage regional accounts</li><li>Fluency in English and Italian preferred</li></ul>

Responsibilities: <ul><li>Execute the strategy defined by the Strategic Account Executive across assigned regional customer locations and branches.</li><li>Develop and maintain strong relationships with local and regional distributors within the territory.</li><li>Coordinate closely with Enterprise Account Teams to ensure effective coverage of strategic and large enterprise accounts.</li><li>Support and engage key wholesale partners and their branch networks through training, business development, and activation initiatives.</li><li>Deliver product training and technical support across distributor branches and contractor networks.</li><li>Work directly with contractors as key influencers in the sales process, ensuring they are equipped to specify and promote our solutions.</li><li>Implement channel strategies to drive revenue growth and increase market share through distribution partners.</li><li>Negotiate and manage local agreements, pricing structures, and performance metrics with distributors.</li><li>Conduct regular business reviews with partners to track performance and identify growth opportunities.</li><li>Ensure strong alignment and communication between all stakeholders across the value chain.</li><li>Promote client full portfolio, including compressors, controls, electronics, monitoring solutions, and related technologies as part of a complete customer offering.</li><li>Maintain accurate sales activity, pipeline, and account information within Salesforce CRM.</li><li>Travel extensively within the assigned territory to support customers, distributors, and contractors.</li></ul> Requirements: <ul><li>Technical qualification, degree, HNC/HND, apprenticeship, or equivalent experience in Refrigeration, HVAC, Mechanical Engineering, Electrical Engineering, or a related discipline.</li><li>Minimum of 5 years experience in technical sales, application engineering, business development, or channel sales.</li><li>Strong technical understanding of HVAC/R systems, including compressors, controls, electronics, and related solutions.</li><li>Proven experience working with distributors, wholesalers, contractors, and installation partners.</li><li>Excellent communication, relationship-building, and stakeholder management skills.</li><li>Strong commercial acumen with the ability to influence and negotiate effectively.</li><li>Ability to work independently while collaborating effectively within a matrix organization.</li><li>Proficiency in Salesforce or equivalent CRM systems.</li><li>Full UK driving licence and willingness to travel extensively.</li></ul> Preferred Qualifications and Experience: <ul><li>Experience working with enterprise-level customers and complex account structures.</li><li>Previous experience within the HVAC/R, refrigeration, building services, or industrial solutions sectors.</li><li>Exposure to regional or national sales environments.</li><li>Understanding of contractor influence models and specification-driven sales processes.</li><li>Experience delivering technical product training and supporting channel partner development.</li></ul>

Skills

Industry

Location

Jobtitle

211 instrument electrical reliability engineer Jobs found

Production Supervisor

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Senior Manager-Advanced Quality Engineering

Account Executive

Territory Sales Executive

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

211 instrument electrical reliability engineer Jobs found

Production Supervisor

Senior Process Engineer, Wet

Senior Process Engineer, Dry Etch

Product Engineer/Senior - FDC/R2R

Account Manager IV - Connected Living Solutions

MFG & Process DVL Engineer I

Maintenance Technician

Senior Manager-Advanced Quality Engineering

Account Executive

Territory Sales Executive

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.