Quality Engineer

Senior Project Manager Engineer

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Mechanical Engineer

Supervisor – Quality & Reliability Engineering

Project Manager Engineer

R&D Product Development Engineer - Bengaluru

Responsibilities: Provide review and drive to approval of the validation protocols and reports for facility, equipment, laboratory instrument, and utility systems. <ul><li>Review and approval of technology/method transfer protocols and reports.</li><li>Review and evaluation of change controls</li><li>Review and approval of deviations and assurance that they define root causes and determine appropriate CAPA.</li><li>Participate in cross-functional teams to support execution of commissioning, installation qualification (IQ), operational qualification (OQ), performance qualification (PQ), and validation protocols.</li><li>Provide quality presence during qualification execution, ensuring data integrity, deviation management, and proper documentation of results.</li><li>Support the timely review and approval of executed qualification documentation and ensure readiness for inspection or submission.</li><li>Drive timely and compliant resolution of deviations, non-conformances, and CAPAs arising during operations and qualification activities.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing validation, change control, deviation, and other SOPs relevant to the responsibilities</li><li>Review and approve site procedures to ensure clarity and compliance with cGMP standards.</li><li>Ensure proper execution of Good Documentation Practices (GDP) in all QA-reviewed documents, including validation records, logbooks, and manufacturing records.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits, with emphasis on operational and qualification-related topics.</li><li>Monitor key quality metrics and drive performance improvements in areas such as deviation reduction, batch record right-first time, and qualification readiness.</li><li>Contribute to the continued inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications/Experience <ul><li>Bachelor’s degree in engineering or technical discipline (e.g., engineering, Biology, Chemistry, Pharmacy).</li><li>5+ years of experience in pharmaceutical manufacturing QA, including direct involvement in qualification/validation activities.</li><li>Prior experience reviewing or approving qualification protocols and validation reports in GMP environments.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills/Competencies <ul><li>Strong knowledge of validation principles and qualification documentation expectations.</li><li>Effective team leader with experience supervising QA staff and coordinating cross-functional support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, engineering, and validation stakeholders.</li><li>Sound judgment and decision-making under pressure in a dynamic manufacturing environment.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities: <ul><li>Take full ownership of one or more New Product Development (NPD) projects.</li><li>Lead core teams toward achieving common project objectives.</li><li>Manage project resources effectively to ensure projects are “staffed for success.”</li><li>Collaborate and negotiate with functional managers and the Project Approval Committee (PAC) to address and resolve resource constraints.</li><li>Ensure adherence to the defined product development process and maintain project discipline.</li><li>Keep the team focused on priorities and individual responsibilities.</li><li>Present regular project status updates to the PAC following the contract date.</li><li>Proactively identify risks and drive timely actions to maintain project momentum.</li><li>Resolve conflicts and manage controversial issues constructively.</li></ul>&nbsp;Requirements: Qualifications &amp; Experience <ul><li>Education: Bachelor’s degree required.</li><li>Experience: 5–10 years of experience in project management or a related field.</li><li>Industry Experience: Manufacturing experience is required.</li><li>Proven leadership skills in developing and managing cross-functional teams.</li><li>Demonstrated ability to create effective project plans, manage risks, and handle uncertainties.</li><li>Solid understanding of project management techniques, tools, and best practices.</li><li>Knowledge of manufacturing processes and operations.</li><li>Experience working in a matrix organization and navigating cross-functional dynamics.</li><li>Expertise in balancing time-to-market goals with quality commitments.</li><li>Strong critical thinking, problem-solving, and decision-making skills.</li><li>Excellent verbal communication skills (English proficiency required).</li><li>Certifications: Qualification in Project Management or equivalent; PMP certification preferred.</li></ul>

Responsibilities: <ul><li>At our client, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.&nbsp;</li><li>Drives the implementation of programs and projects to improve products and processes and develops deployment plans.&nbsp;</li><li>Digital Factory transformation project followed APAC and Internal plant.direction.&nbsp;</li><li>Daily trouble shooting in production, provide short term &amp; long term solution to team.&nbsp;</li><li>Suggest &amp; drive improvements digital solution.&nbsp;</li><li>Support project assignment.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Plant digitals, cooperate with APAC and our client service team for transformation project.&nbsp;</li><li>Digital factory transformation project implementation, Identify and resolve issue during implementation.&nbsp;</li><li>Training on new digital tools and technologies. Develop training material and provide training to ensure fully utilization.&nbsp;</li><li>Maintain and troubleshooting for exiting digital tools, AGV, Material Calling System, Hydra, dPIM etc.&nbsp;</li><li>Continuous Improvement, identify new opportunities and innovation in operation processes.&nbsp;</li><li>Data analysis and monitoring, Operations Scorecard, Operation Dashboard (SCCOP, SHE, OEE) and advise weakness areas for improvement.&nbsp;</li><li>Handle on CER related /CI working with operations and cross functional team.&nbsp;</li><li>Support operations project assignment.&nbsp;</li></ul> What your background should look like&nbsp; <ul><li>Bachelor’s Degree in Information Technology, Computer science or related field.&nbsp;</li><li>Strong knowledge and experiences in Digital transformation projects.&nbsp;</li><li>Familiarity with digital tools and technologies used in manufacturing.&nbsp;</li><li>Minimum 3 to 6 years working experience in manufacturing sector.&nbsp;</li><li>Knowledge of in cloud technology, virtualization, mobile application, IOT, SQL Server.&nbsp;</li><li>Reporting Services, Power BI, Tableau.&nbsp;</li><li>Good knowledge in Data Storage, Cloud, Microsoft Power Apps.&nbsp;</li><li>Good knowledge in Dashboard creation, Graphic and User Interface (UI) design.&nbsp;</li><li>New enhancement for new functionality in SAP and Hydra.&nbsp;</li><li>OEE, Utilization analysis skill.&nbsp;</li><li>Knowledge and experiences in Enterprise Resource Planning software – SAP/BOM/Routing will be advantage.&nbsp;</li><li>Logical thinking with Project Management Skill.&nbsp;</li><li>Fluent in English and good communication.&nbsp;</li><li>Interpersonal skills.&nbsp;</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Build secure, performant, cross-platform applications for both customers and internal company teams.</li><li>Collaborate across teams to solve technical and non-technical challenges.</li><li>Work closely with Product and Design to determine and optimize user experience and information architecture.</li><li>Build new features and maintain existing features by contributing across the full technical stack.</li><li>Debug and resolve production issues and implement fixes for them.</li><li>Be a part of the teams on-call rotations.</li><li>Evaluate new technologies and techniques to improve overall practices.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in full-stack development.</li><li>Have a passion for learning.</li><li>Have excellent communication and collaboration skills.</li><li>Are customer-obsessed and love helping people.</li><li>Have a good understanding of Javascript and TypeScript.</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Role Description: <ul><li>We are seeking a talented Mechanical Engineer to join our team in the food manufacturing industry.</li><li>The successful candidate will be responsible for designing, developing, and maintaining mechanical systems and equipment to ensure efficient and reliable production processes.</li></ul> Responsibilities: <ul><li>Conduct feasibility studies and cost analyses for new projects and equipment upgrades.</li><li>Oversee the installation, commissioning, and testing of new mechanical equipment and systems.</li><li>Troubleshoot and resolve mechanical issues to minimize downtime and ensure continuous operation.</li><li>Develop and implement preventive maintenance programs to extend the lifespan of equipment and reduce the risk of breakdowns.</li><li>Collaborate with cross-functional teams, including production, quality control, and safety, to ensure reliable operations.</li><li>Maintain accurate records of engineering activities, including design specifications, maintenance logs, and equipment status.</li><li>Provide technical support and training to maintenance and production staff.</li><li>Evaluate production line postures to develop strategies aimed at minimizing unplanned downtime, enhancing Mean Time Between Failures (MTBF), and reducing Mean Time To Repair (MTTR).</li><li>Led Natural Resources Conservation (NRC) initiatives to enhance sustainability within the plant.</li><li>Direct the implementation of Working Standards within the team’s capabilities</li></ul> Requirements: <ul><li>Engineering degree.</li><li>Minimum 1 year to maximum 4 years of work experience required.</li><li>Preferred Industry--FMCG, Manufacturing</li><li>Team Management experience is preferred but not mandatory to have.</li></ul>

Responsibilities: <ul><li>Collaborate with engineering, production, and planning teams to continuously improve product quality across the manufacturing process.</li><li>Supervise and manage the incoming and final inspection areas.</li><li>Drive improvement initiatives within incoming, in-process, and final inspection operations.</li><li>Prioritize inspection activities to ensure timely completion of production materials, engineering validations, and gage R&amp;Rs.</li><li>Identify and execute containment actions for nonconforming materials found during in-process or final inspections.</li><li>Work with cross-functional teams to investigate nonconforming products using root cause analysis tools (Ishikawa, 5-Whys, Is-Is Not, etc.) and implement corrective and preventive actions.</li><li>Communicate with customers regarding product-related complaints and facilitate evaluation and return of materials as needed.</li><li>Investigate product quality issues related to customer returns (e.g., nonconforming material reports, corrective actions).</li><li>Create and update operations procedures and documentation used within production.</li><li>Ensure compliance with quality assurance policies and procedures to meet or exceed customer expectations.</li><li>Implement continuous improvement initiatives to reduce defects, improve efficiency, and enhance product quality.</li><li>Conduct manufacturing and quality system audits to ensure compliance with ISO 13485.</li><li>Support operational projects such as Kaizen, data analysis, and problem-solving initiatives.</li></ul> Requirements: Qualifications/Background: <ul><li>Bachelor’s degree in Quality, Science, or Engineering preferred (High School Diploma with equivalent experience will be considered).</li><li>Prior experience as a Quality Engineer in a manufacturing environment.</li><li>5+ years of industry experience in a medical device manufacturing or pharmaceutical environment.</li><li>Supervisory or management experience preferred.</li><li>Working knowledge of FDA, ISO, and MDD quality systems applicable to medical device companies.</li><li>Excellent written and verbal communication skills.</li></ul>

Responsibilities: Project Timeline: <ul><li>Identify and align projects goals and scope with PJM and PM, and breakdown tasks of tooling/process developments and qualification</li><li>Make/align tooling development and qualification timeline, assign tasks to Ops team include tooling development, materials purchase</li><li>Track and manage core team to execute project progress based on committed project schedule</li></ul> Project Cost: <ul><li>Lead Ops to simulate sample cost and production cost to achieve project landing zone target, lead Ops to optimize launch cost to the best</li><li>Budget and control scrap cost though leverage design and manufacturing process to meet project target during NPI phase</li></ul> Project Execution: <ul><li>Guide capacity planning, materials sourcing and manpower to support all builds in the plant.</li><li>Oversee the progression of tooling/process development, identify bottleneck and issues, organize Ops team to improve those bottleneck and issues.</li><li>Oversee risks assessment in project execution, stay interlock with PJM to make multination plan and conduct the planned activities in Ops.</li><li>Finalize the Safe Launch plan for the appropriate mix of product, tool capability and demand with the approval of the PjM, Quality, MDPE, and PjE. a. Lead Safe Launch team meetings to ensure successful HVM startup and manufacturing process qualification for attainment of required metrics for successful G5 handoff.</li><li>Align the budget with the Ops team with the tooling list provided by MPDE-A, control total capital spending against CER.</li><li>Lead and coordinate line setup to conduct LVM sample builds and coordinate HVM tool builds.</li><li>Lead Ops to make ramp up plan, include materials, operations and tool capacity ramp up, ensure manufacture team take over production control smoothly after G5.</li></ul> Product Sustaining: <ul><li>Product migration, as a receiving or sending leader to execute product move in or move out, including project timeline, investment, cost control, machine/material/manpower preparation, safety stock, safe launch, etc.</li><li>Lead product capacity analysis and expand it through re-investment per estimation.</li></ul> Requirements: <ul><li>Bachelor’s degree, engineering background is better</li><li>PMP certification preferred</li><li>At least 5 years related working experience in project management, 1~2 years’ experience in connector/cable/cable assembly is better</li><li>Fluent oral and written/reading in English</li><li>Experience in IT Project Manager, Data Center Business or digital networking project is an advantage.</li></ul>

Role Description:&nbsp;<ul><li>Design &amp; Development of automotive connector system.</li></ul> Responsibilities: <ul><li>Responsible for mechanical design of Connectors based on customer requirement for TS.</li><li>Responsible to carry out detailed mechanical design work including 3D modelling, Proposal /detail drawings for costing / production, initiating simulation and prepare design verification / product validation plan per requirement.</li><li>Responsible for choosing standard parts, features, material as per internal guidelines which would meet the internal / customer target process and cost.</li><li>Responsible for preparing and presenting design reviews per manufacturability, update design per suggestion and keep record.</li><li>Responsible for carrying out design change requests in a timely manner / own the product responsibility&nbsp;</li></ul> Requirements: <ul><li>B.E/B. Tech in Mechanical Engineering (equivalent) / Diploma with Post graduation&nbsp;</li><li>Knowledge about various phases of product realization / product development.</li><li>Knowledge of state-of-the-art design tools such as Creo / CAD tools,</li><li>Basic knowledge in manufacturing process (Machining, Molding, Stamping, Plating, etc.,)</li><li>Following are added advantage - Geometric Dimension &amp; Tolerancing (GD&amp;T), GPS, Electrical &amp; Electronic Components design and Development.</li><li>1-4 years of experience in Concept Design and Development of products preferably in plastic and stamped parts.</li><li>Good knowledge in Creo software / CAD tools, PDM windchill / Similar,</li><li>Basic knowledge about Tolerance stack-up and GD&amp;T / GPS</li><li>Basic knowledge on Plastics &amp; Sheet Metal components will be added advantage.</li><li>Good Conceptual, problem solving and Analytical Skills.</li><li>Ability to communicate effectively and accurately across multi-cultural groups.</li><li>Excellent Communication and Presentation skills.</li></ul>

Skills

Industry

Location

Jobtitle

110 instrument engineer Jobs found

Quality Engineer

Senior Project Manager Engineer

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Mechanical Engineer

Supervisor – Quality & Reliability Engineering

Project Manager Engineer

R&D Product Development Engineer - Bengaluru

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

110 instrument engineer Jobs found

Quality Engineer

Senior Project Manager Engineer

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Mechanical Engineer

Supervisor – Quality & Reliability Engineering

Project Manager Engineer

R&D Product Development Engineer - Bengaluru

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.