Procurement Operations Manager

Finance Controller

Manager - Environmental Health & Safety (EHS)

VAVE Staff Product Development Engineer

Senior Business Intelligence Analyst

Quality Associate I

Card Authorisation & Fraud Detection Analyst

Continuous Improvement Analyst III

Senior Manufacturing Engineer

HR Business Partner IV

Responsibilities: Primary Function : <ul><li>Lead the procurement function for Pringles plant at Bandar Enstek, Malaysia. Act as focal point between regional procurement and local plant team</li><li>Manage all local procurement activities, including ad hoc sourcing, negotiations and contracting for items not in scope for regional category manager, issue resolution, local supplier management, shipment expediting, materials claim management and etc.</li><li>Support the sourcing strategy of the regional and global procurement sourcing team.</li><li>Connect plant stakeholders with MSP (managed service provider) for IDM STP support (Source-to-PO)</li><li>Advocate the global procurement policies (GPP) and responsible to educate the BU requesters on the GPP policy and compliances</li><li>Work with BU stakeholders, Category Managers, Process and Systems Lead, Procurement Operations Lead to identify efficiency and cost reduction opportunities</li><li>Manage supplier relationship and performance</li></ul> Principal Duties &amp;&nbsp;Responsibilities : <ul><li>Deliver upon targets and KPIs set by snacks supply chain and regional procurement</li><li>Attend plant supply chain deployment meetings</li><li>Comply with GMP and continuously improve our Food Safety Programme</li><li>Participate in Regional Sourcing activities and ensure regional / local execution knowledge and strategic input</li><li>Lead the execution and implementation of procurement sourcing strategy</li><li>Leverage regional procurement team to drive values</li><li>Aid in local supplier searches</li><li>Manage interactions with key suppliers</li><li>Manage financial reporting of procurement function</li><li>Manage transactional coordinators and balances workload within the team</li><li>Ensure compliance with policies and procedures</li><li>Deliver policy and process trainings to key stakeholders</li><li>Work closely with key customers to communicate process</li><li>Use data from Process and Systems team to set targets and drive KPIs</li><li>Work with shared services to standardize and automate tactical activities over time</li><li>Suppliers KPIs and service quality and performance improvement plan</li></ul> Requirements: Professional : <ul><li>Undergraduate Degree Required and minimum of 7 years of related work experience within Procurement</li></ul> Technical/Functional: <ul><li>More of Procurement generalist than a specialist.</li><li>Knowledge of order to payment technologies (P2P, SAP) and other procurement digital tools.</li><li>Sound procurement skills (negotiation, supplier management).</li><li>General knowledge of the supplier market in associated country.</li><li>Comprehensive knowledge of purchasing and basic understanding of supply chain management.</li><li>Financial tracking and reporting skill.</li><li>Team player.</li><li>Passionate about process improvement.</li><li>Strong detail orientation.</li><li>Excels at continuous cost reduction/process improvement.</li><li>Excellent communication skills.</li><li>Strong stakeholder management skill.</li><li>Effective at cross-functional teamwork.</li><li>Computer literate with working knowledge of Microsoft Office including Word, Powerpoint and Excel.</li><li>Ability to navigate with ambiguity.</li><li>Ability to multi-task in a fast paced environment.</li><li>Ability to work independently and with a sense of urgency.</li><li>Comfortable with conflict.</li><li>Strong service oriented approach, with timely responsiveness.</li><li>Ability to engage and collaborate with team members and stakeholders from a distance.</li></ul>

Responsibilities: <ul><li>Management of finance team to ensure delivery of timely, accurate monthly accounts, preparation of the financial pack and KPIs.</li><li>The key focus will be to drive financial and business improvements in the Filter Products manufacturing site and to act as a business partner to the local GM and management team. Support is also required for the local Distribution business.</li><li>Review site month end financials, prepare variance analysis with supporting commentary consolidate for the Hungary region.</li><li>Drive site Gross margin and Non-productive spend initiatives.</li><li>Prepare and review customer and product analysis (pricing, revenue and margin).</li><li>Drive working capital improvements including cash collection and inventory management.</li><li>Ensure that standard costs are maintained and implemented across the product range in the Filter Products manufacturing site.</li><li>Review site control files and trial balances to ensure no financial risk to the business and instil robust financial controls.</li><li>Ensure that all sites comply with the Accounting Manual (EAM).</li><li>To support the businesses in the preparation of the annual Plan and quarterly forecasts for the region and associated presentations and packs.</li><li>Review of all capex appraisals pre sign off and follow up on actual spend v plan.</li><li>Attend and present the financials at the monthly operational reviews.</li><li>Legal and banking signatory for the Filter Products business and sign off monthly payroll run.</li><li>Review monthly FX hedging forecasts and submissions to Group Treasury</li><li>Deal with Group, SBU and Regional FD requests</li><li>Lead the preparation for the Hungarian internal and external audits.</li><li>Develop staff and identify training needs within the team. Document standard procedures.</li><li>Keeping the HSE-, fire safety- and hygiene rules, wearing the relevant personal protective equipment.</li><li>During the daily work meeting the expectations of the Integrated Management System regulations.</li></ul> Requirements: <ul><li>Educated to degree level (potentially in Finance, Accounting, or Economics); professional accounting qualification.</li><li>10 years PQ experience within a manufacturing environment is essential.</li><li>High level of numeracy and IT literate (Excel/PowerPoint).</li><li>Excellent English written and oral communication skills.</li><li>Audit background.</li><li>ERP system knowledge.</li><li>Project management knowledge and experience.</li></ul>

Responsibilities: Planning and Budgeting&nbsp;<ul><li>Initiate and execute annual EHS &amp; S improvement project plan, EHS &amp; S training plan, EHS &amp; S internal audit plan and annual EHS &amp; S budget&nbsp;</li></ul> People Management &amp; Development&nbsp;&nbsp; <ul><li>Allocate and balance work across direct reports, review and provide timely performance feedback to subordinate, coach, guide, develop and motivate them,&nbsp;</li><li>help to resolve functional issues in the team, submit manpower request and interview candidates in order to achieve targeted function performance goal.&nbsp;</li><li>Develop skills of direct reports and others with EHS &amp; S responsibilities in the organization.&nbsp;</li></ul> EHS Structure &amp; Program Management&nbsp; <ul><li>Build action plans for the implementation of the organization’s EHS &amp; S programs and take a leadership role in execution in order to deliver the organization’s EHS &amp; S goals and strategy.&nbsp;</li><li>Setting up strong Safety First culture.&nbsp;</li><li>Establish and develop procedures and teams for driving EHS improvements and managing EHS programs.&nbsp;</li><li>Communicate with all levels in the organization on EHS to engage with, influence and promote EHS culture.&nbsp;&nbsp;</li><li>Follow up internal and external audit to verify EHS performance and continue improvement&nbsp;</li><li>Maintein ISO14001 and our client compliance tools.&nbsp;</li><li>Ensure safety of construction projects in the Thailand Erni site.&nbsp;</li><li>Ensure safety of plant moving, including but not limited to moving IND equipment out and DDN equipment in. As well as its installation and&nbsp;</li><li>commissioning safety&nbsp;</li></ul> Reporting&nbsp; Implement below tasks in order to meet the requirements of reporting.&nbsp; <ul><li>Report related required EHS&amp;S data to site, BU management, BU EHS and Corporate EHS.&nbsp;</li><li>Report related EHS&amp;S data required based on applicable legal regulations and company policies.&nbsp;</li><li>Monitor and report organizational safety performance against our client Safety Tool.&nbsp;</li><li>Evaluate and report environmental performance quarterly using company environmental assessment tools.&nbsp;</li></ul> Sustainability and BCP&nbsp; Focus on GHG, energy,&nbsp;hazardous waste &amp; scope 3 reduction.&nbsp;&nbsp; <ul><li>Track energy reducion data.&nbsp;</li><li>Work with Facility team to identify opportunities of energy reduction.&nbsp;</li><li>Coordinate business contunity plan of DG site.&nbsp;</li><li>Follow BU, Seg and Corp policy and lead scope 3 reduction of the site&nbsp;</li></ul> Requirements: <ul><li>University degree or equivalent level of qualification in safety, health, environmental, chemical, mechanical or related technical discipline&nbsp;</li><li>Thailand government required qualification as company EHS manager is a MUST&nbsp;</li><li>Professional EHS Certification preferred.&nbsp;</li><li>Minimum 8+ years EHS experience required.&nbsp;</li><li>Minimum 5+ years experience in EHS management in manufacturing.&nbsp;</li><li>3+ years construction safety experience is a MUST.&nbsp;</li><li>Knowledge and experenice on scope 3 is preferred.</li></ul>

Responsibilities: <ul><li>Lead VAVE initiatives to optimize cost, improve product performance, and enhance customer value while maintaining quality and reliability.</li><li>Go beyond traditional VAVE by driving R&amp;D in emerging materials, advanced manufacturing processes, automation, digital technologies, and innovative supplier solutions.</li><li>Collaborate with cross-functional teams, suppliers, and technology centers to identify, assess, and implement value-driven design and process improvements.</li><li>Develop and deploy tools and methods to analyze cost, performance, manufacturability, and sustainability throughout the product lifecycle.</li><li>Build and maintain a pipeline of VAVE projects in partnership with engineering, procurement, operations, and product management.</li><li>Serve as a subject matter expert in cost optimization and value engineering strategies, including advanced sourcing and alternative design concepts.</li><li>Partner with customers, sales, and product managers to gather Voice of Customer (VOC) insights and translate them into engineering solutions.</li><li>Provide technical support for cost-reduction activities, including design validation, troubleshooting, and verification of VAVE solutions.</li><li>Collaborate globally with manufacturing, procurement, and suppliers to ensure compliance with technical, quality, cost, and delivery objectives.</li><li>Introduce breakthrough engineering solutions that leverage new technologies and supplier capabilities to accelerate business growth.</li><li>Application Engineering: Understanding customer requirements and offering sustainable cost-efficient design solutions.</li><li>Engineering Management: Developing technical roadmaps aligned with market trends and effectively communicating them to business units, management, and customers.</li><li>Collaboration: Working efficiently with global teams and cross-functional stakeholders.</li><li>Technical Expertise: Adapting to new skills, futuristic materials, advanced manufacturing processes, automation, digital technologies, and innovative supplier solutions.</li><li>Quality Control: Ensuring accuracy and quality in services, documentation, and engineering outputs.</li></ul> Requirements: <ul><li>Master’s degree in mechanical engineering from premier institution.</li><li>Deep understanding of product, design, materials (metals/plastics properties), processes and manufacturing science/technology.</li><li>Knowledge of manufacturing processes such as machining, molding, stamping, and plating is advantageous.</li><li>Familiarity with material standards and agency approvals for connectors, cables, and cable assemblies.</li><li>Experience in environmental life cycle assessment, circular economy, or product stewardship/compliance.</li><li>Knowledge of ISO/IEC/UL standards related to carbon footprint and emissions reduction in industrial products.&nbsp;</li><li>Minimum of 12 years of experience in Product Development, R&amp;D and VAVE engineering.</li><li>Background in connector design (Power/Industrial/Auto connectors) is a plus.</li><li>Ability to work independently in a highly technical environment.</li><li>Expertise in Design for Cost (DFC), Design for Manufacturing (DFM), and Design for Sustainability (DFS).</li><li>Strong Presentation Skills: Proficiency in PowerPoint and effective communication of technical concepts.</li></ul>

Role Description: <ul><li>The Continuous Improvement EMIA team reports to Operations Automotive EMIA.</li><li>By providing new generation digital solutions to our Operational teams across EMIA, our team creates full transparency and speed in the ongoing digital &amp; lean transformation(s), which will enable all involved functions to leverage data to develop business insights and roadmap updates based upon clearly arranged and understandable data. Due to the extended scope, focusing also on the connecting processes from Supplier(s) to Manufacturing ending at the Customer(s) (internal and external) we will function as ‘the’ differentiator for our Company.</li><li>The Data Scientist Automotive EMIA will report to the Smart Factory Leader Automotive EMIA.&nbsp;</li></ul> Responsibilities:&nbsp; <ul><li>Lead projects and work together with our Automotive EMIA Operations plants, internal (IT, , Corporate Technology, CoE, SC, ..) and external partners in the area of Smart Factory (Applications, ML, AI, DL), aligned with Operations Automotive EMIA Strategy.</li><li>Lead Smart Factory improvement projects (Enhancements) of existing applications together with internal / external supplier and customers (project management) until the level of RTD (Ready To Deploy)</li><li>·Use a combined knowledge of computer science and applications, modelling, statistics, analytics and maths to solve problems.</li><li>Identify and interpret data sources, manage large amounts of data, merge data sources together, ensure consistency of datasets, create visualizations to aid in understanding data.</li><li>Develop, Validate and Deploy (including Training and Coaching of the users) until the level of RTD (Ready To Deploy), Digital Factory Applications, ML models, contributing to waste elimination and efficiency improvements within all Operations functions (Manufacturing, Quality, SC, LOG, ….), this together with our internal and external partners.</li></ul>&nbsp;Requirements: Desired candidate &amp; Qualification <ul><li>Good understanding of a technology driven manufacturing company.</li><li>Knowledge of the core manufacturing technologies: Stamping, Plating, Assembly, Molding.</li><li>Experienced with data visualization tools like PowerBi, Tableau, ThingWorx,..</li><li>Good applied statistics skills, such as distributions, statistical testing, regression, etc.</li><li>Development experience in programming languages R, Python.</li><li>Knowledge, experience in JAVA scripting</li><li>Excellent pattern recognition and predictive modelling skills.</li><li>Excellent understanding of machine learning techniques and algorithms, such as k-NN, Naive Bayes, SVM, Decision Forests, neural networks and deep learning etc.</li><li>Experience in technologies like, Jupyter Notebooks, Numpy, Pandas, Seaborn, Scikit-learn, PyTorch and TensorFlow.</li><li>Exposure to recent developments in Deep Learning, Gen AI, Agentic AI domain.</li><li>Database skills, on-premises and cloud based.</li><li>Experience in AWS is an advantage, functional knowledge of AWS platforms such as Sagemaker, S3, and RedShift.</li><li>Excellent presentation skills in both spoken en written English.</li><li>&nbsp;Excellent and strong communicator</li><li>The ability to translate, explain and bring, complex data science topics to an easy understandable level, speeding up acceptance level in general.</li><li>Bachelor or master’s in data science</li><li>Team player with a solution focused problem-solving mentality.</li><li>Change agent with high Execution level, including training and coaching talents.</li><li>Passioned about the combination of Technology, Data, Analytics and Statistics with link to Quality, Product and Process Engineering</li><li>Inspired by and searching actively for new technologies and methods.</li></ul>

Responsibilities: <ul><li>Provide daily quality oversight during manufacturing, warehousing, and qualification activities, including but not limited to line clearance and AQL sampling.</li><li>Ensure adherence to cGMP, SOPs, and regulatory standards.</li><li>Lead and execute QA review of batch records, logbooks, and related GMP documentation to support timely and accurate product disposition.</li><li>Develop, implement, and maintain site-specific quality procedures (SOPs, work instructions, forms) governing QA support responsibilities</li><li>Ensure proper execution of Good Documentation Practices (GDP)and data integrity in all manufacturing executed records.</li><li>Take active role in preparing the site for regulatory inspection.</li><li>Act as a QA representative during regulatory inspections, internal audits, and customer audits.</li><li>Contribute to the inspection readiness of the site, including periodic walkthroughs and risk-based quality improvements.</li></ul> Requirements: Qualifications / Experience <ul><li>Bachelor’s degree in a scientific or technical discipline (e.g., Biology, Chemistry, Pharmacy, Engineering).</li><li>5+ years of experience in pharmaceutical manufacturing, or QA.</li><li>Familiarity with aseptic manufacturing, sterile injectable processes, and cleanroom environments.</li><li>Knowledge of FDA cGMPs, ICH Q8-Q10 guidelines, EU Annex 1, and risk-based qualification approaches.</li><li>Experience supporting regulatory inspections and validation documentation reviews.</li></ul> Skills / Competencies <ul><li>Strong knowledge of 21 CFR part 10, and 211.</li><li>Strong knowledge of aseptic GMP manufacturing and QA shopfloor support.</li><li>Excellent organizational and communication skills with high attention to detail.</li><li>Ability to work collaboratively with operations, and engineering.</li><li>Commitment to data integrity, continuous improvement, and patient safety.</li></ul>

Responsibilities&nbsp;: Authoriser - Card Authorisation&nbsp;<ul><li>Process and authorize credit &amp; debit card transactions in a timely and accurate manner.&nbsp;</li><li>Perform voice-authorisation and give assistance to merchants and customers at POS transactions.&nbsp;</li><li>Meeting Service Level Agreements (SLA) standards on pick-up call (for merchants and customers).&nbsp;</li><li>Manage email duties, assisting Call Centre &amp; RMs on block/unblock cards, temporary increase limit adjustment, and bypass security check for customers.&nbsp;</li><li>Support Cards &amp; Payments (CPP) Cards Operations to process Authorisation code for unsecured products.&nbsp;</li></ul> Authoriser – Merchant and Customer Support <ul><li>Establish and maintain relationships with merchants, providing support and guidance on credit &amp; debit card transaction processes.&nbsp;</li><li>Assist merchants with inquiries and resolve any issues related to card authorizations.&nbsp;</li><li>Assist in transaction code cancellation request receive from merchants, customers and Contact Centre.&nbsp;</li><li>Respond to customer inquiries regarding credit &amp; debit card transactions and account statuses.&nbsp;</li><li>Educate customers on card usage, security, and fraud prevention.&nbsp;</li><li>Assist customer to adjust Temp Increase Limit.&nbsp;</li><li>24/7 emergency card replacement support.&nbsp;&nbsp;</li><li>Act as point-of-contact with Card Scheme&nbsp;&nbsp;</li></ul> Authoriser – Card Surveillance Support (transaction monitoring)&nbsp; <ul><li>Monitor and review card transactions for potential fraud and irregularities.&nbsp;</li><li>Monitor cards transaction in real time alerts queue and identify high risk transactions.&nbsp;&nbsp;</li><li>Monitor and analyze transactions to detect fraudulent activities using Visa/Mastercard fraud detection tools.&nbsp;</li><li>Observe customer transactions and identify suspicious and fraudulent activities such as account take over (scam fraud), friendly fraud, lost &amp; stolen card, and Credit Master attacks. Block/unblock cards, and attempt transaction cancellation when necessary.&nbsp;&nbsp;</li><li>Contact customer or manually trigger SMS notification to alert customer of suspicious transaction and perform verification with customer.&nbsp;</li><li>Follow-up on uncontactable customer by calling or sending SMS to notify to mitigate losses.&nbsp;</li><li>Manage customers expectation and explain to customer on fraudulent transactions and scam activities.&nbsp;</li><li>Support Fraud Investigation Team and Fraud Issuing team when required on fraud matters.&nbsp;</li><li>Perform merchant ID blocking to prevent Bin attack fraud and support CPP on parameter maintenance for 3DS system.&nbsp;</li></ul> Requirements: <ul><li>Diploma or equivalent qualification preferred.&nbsp;</li><li>Proficient in English. Ability to converse in in Mandarin (and dialects), Bahasa Malay, Tamil will be a plus.&nbsp;&nbsp;</li><li>Able to use MS Office and possess good written and communication skills.&nbsp;</li><li>Pleasant disposition with good interpersonal skills.&nbsp;</li><li>Possess strong analytical skills.&nbsp;</li><li>Possess high standard of customer service.&nbsp;</li><li>Manage task and responsibilities with minimal supervision. Take initiative and be proactive in solving problems.&nbsp;</li><li>Be a Team player, collaborate effectively with colleagues, and assist team members when needed, fostering a&nbsp;positive team.&nbsp;&nbsp;</li><li>Ability to work both independently and collaboratively in a fast-paced environment.&nbsp;</li><li>Able to perform 24 hours rotating shift including weekend &amp; public holiday and to be on standby for recall when&nbsp;called upon.&nbsp;&nbsp;</li><li>Ability to work in a fast-paced environment with ability to take pressure and meet the demands of the job.&nbsp;</li><li>Previous experience on fraud surveillance in banking sector or law enforcement agencies will highly be&nbsp;considered.&nbsp;</li><li>Keen interest in scam prevention&nbsp;</li></ul>

Responsibilities: <ul><li>Facilitate, lead, or coach Kaizen and Kaizen events across the organization.</li><li>Work collaboratively with tool or element owners to implement Continuous Improvement tools.</li><li>Lead and audit Continuous Improvement tools.</li><li>Train teams in Continuous Improvement methodologies, tools, and transformation methods (e.g., 5S, TPM, Value Stream Mapping, VSM-D, CCF, 3P, Lean Manufacturing).</li><li>Facilitate and train teams for transformation Kaizen events in highly impactful areas or production cells.</li><li>Obtain internal certifications such as Novice, Apprentice, and Practitioner level in Continuous Improvement.</li><li>Provide coaching to Novice and Apprentice practitioners.</li><li>Train and coach teams on plant Key Performance Indicators (KPIs).</li><li>Report periodic progress on assigned tools, metrics, and initiatives.</li><li>Conduct capacity analysis and mentor production supervisors on managing line capacity.</li><li>Develop scenarios for capacity planning, including footprint analysis.</li><li>Apply advanced knowledge in line balancing and its implications for realistic planning (cross-training, validations, capacity planning, hiring requirements, etc.).</li></ul> Requirements: Knowledge &amp; Experience <ul><li>Bachelor’s Degree in Industrial Engineering or related field.</li><li>3–5 years of experience in continuous improvement, cost savings, or productivity improvement roles.</li><li>Lean certification required.</li><li>Green Belt or Black Belt certification is desirable.</li><li>Experience in process improvement, Six Sigma, and product/process qualification and validation.</li><li>Bilingual (English/Spanish).</li></ul> Skills <ul><li>Proficiency in Microsoft Office 365.</li><li>Strong skills in Excel (Pivot Tables, Charts, Macros), PowerPoint, MS Project, AutoCAD (or similar), Minitab, and simulation software.</li><li>Knowledge of problem-solving techniques.</li><li>Basic competency in creating dashboards using Power BI.</li><li>Basic knowledge of Power Automate or similar tools.</li><li>Ability to work under pressure with strong communication and teamwork skills.</li><li>Experience influencing all organizational levels to support an Operational Excellence culture.</li></ul>

Responsibilities: <ul><li>Lead a dedicated team of engineers and technicians within the Projects or Manufacturing group.</li><li>Ensure that engineers are fully integrated into the overall project team and production support activities.</li><li>Plan and implement training and development programs for direct reports.</li><li>Complete process design and development projects by training and guiding technicians.</li><li>Provide coaching and mentorship to team members.</li><li>Establish engineering goals and objectives aligned with business plans.</li><li>Identify and implement effective, permanent technical and system solutions to problems.</li><li>Consistently meet customer requirements, performance expectations, and deadlines.</li><li>Prepare product and process reports by collecting, analyzing, and summarizing information and trends.</li><li>Champion compliance with internal systems and processes.</li><li>Identify and develop improvements to enhance Service, Delivery, Quality, and Cost metrics using Lean/Six Sigma methodologies.</li><li>Research advanced process technologies and evaluate potential competitive advantages and cost benefits.</li><li>Lead or guide a portfolio of engineering projects in collaboration with cross-functional teams (e.g., NPI, quality engineering, design assurance, R&amp;D).</li><li>Collaborate with teams to plan, coordinate, and implement activities supporting the successful launch of new products, including make/buy analysis, new process introduction, and more.</li><li>Develop or modify manufacturing processes by studying product requirements and designing, modifying, or testing manufacturing methods and equipment.</li><li>Maintain professional and technical knowledge through workshops, publications, networking, and participation in professional societies.</li><li>Manage external relationships with key technology suppliers.</li><li>Oversee workload distribution among engineers and technicians to meet operational and business priorities.</li></ul>&nbsp;Requirements: Education &amp; Experience <ul><li>Bachelor’s degree or equivalent in an Engineering field with 5–10 years of experience in a demanding high-volume production environment or a high-mix, low-volume environment.</li><li>Experience in medical devices or similar regulated manufacturing and quality systems is essential.</li><li>Proficiency with CAD tools; SolidWorks preferred.</li><li>Experience using Minitab, MS Project, and advanced Excel.</li><li>Demonstrated ability to lead a production-focused team, drive technical problem solving, and manage line setup including equipment acquisition and process development.</li><li>Working knowledge of Lean and/or Six Sigma engineering principles with proven results.</li><li>Statistical knowledge, including data analysis and statistical software (JMP, Minitab, etc.).</li><li>Lean Six Sigma Green Belt certification preferred.</li><li>Excellent communication, planning, and organizational skills.</li><li>Self-motivated with strong decision-making abilities.</li><li>Willingness to work independently and to take on an international assignment of up to 3 months.</li><li>Fluent in English (written and verbal), &gt;80% proficiency.</li></ul>

Repsonibilites: <ul><li>Plant serves as a strategic business partner and trusted thought partner to Plant Leaders and in country senior Management.</li><li>This position is located on-site, but a hybrid work schedule will also be considered</li><li>Serve as the HR site leader for the Tullahoma facility, acting as a trusted advisor to site leadership and aligning HR support with key business initiatives.</li><li>Partner with the broader HR network to deliver strategic talent solutions, organizational design, and effectiveness initiatives, fostering a One HR mindset.</li><li>Provide guidance on leadership development, succession planning, and talent pipeline strategies to support long term organizational growth.</li><li>Champion diversity, engagement, and inclusion efforts, with a global mindset and focus on creating equitable access to development and information.</li><li>Coach and support managers on performance, team effectiveness, and employee development to enhance leadership capability and culture.</li><li>Lead and resolve complex employee relations matters, ensuring legal compliance and a respectful, inclusive workplace.</li><li>Design and implement talent development initiatives including stretch assignments, mentoring, and targeted training programs.</li><li>Lead HR project management efforts related to workforce transitions, organizational change, and process improvement initiatives.</li><li>Collaborate with cross-functional partners to deliver high-impact HR initiatives, ensuring clear communication, risk management, and timely execution.</li><li>Preferred: Experience supporting M&amp;A activities, including HR due diligence, integration planning, and workforce impact assessments.</li><li>Develop and manage detailed project plans for HR initiatives, including milestones, communications, and risk mitigation strategies</li></ul> Requirements: <ul><li>Bachelor’s or Master`s degree in business, Human Resource Management, Psychology, or any related field</li><li>10+ years of progressive, international, HR related experience; breadth of HR knowledge and skills in a variety of fields in international context, including Business Partner;</li><li>Experience in a manufacturing and or operations environment is strongly preferred.</li><li>Executive level and leadership experience; Experience influencing without authority Ability to influence, lead and drive execution into the functions/region through close partnership and collaboration with the broader HR function Proved track record in Organization Design, Change Leadership, Talent Management, and Organizational Development Ability to multi-task and work efficiently in a fast-paced, international matrix organization Strong project management and organizational skills.</li><li>Fluent English language skills Has advanced knowledge of regional labor laws and obligations and uses this knowledge to advise management, especially in conflict situations Excellent interpersonal, negotiation, and communication.</li><li>Ability to travel up to 10%</li></ul>

Skills

Industry

Location

Jobtitle

171 intellectual property ip licensing and transactions lead toc Jobs found

Procurement Operations Manager

Finance Controller

Manager - Environmental Health & Safety (EHS)

VAVE Staff Product Development Engineer

Senior Business Intelligence Analyst

Quality Associate I

Card Authorisation & Fraud Detection Analyst

Continuous Improvement Analyst III

Senior Manufacturing Engineer

HR Business Partner IV

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

171 intellectual property ip licensing and transactions lead toc Jobs found

Procurement Operations Manager

Finance Controller

Manager - Environmental Health & Safety (EHS)

VAVE Staff Product Development Engineer

Senior Business Intelligence Analyst

Quality Associate I

Card Authorisation & Fraud Detection Analyst

Continuous Improvement Analyst III

Senior Manufacturing Engineer

HR Business Partner IV

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.