EMEA Field Service Power Distribution Lead Engineer- Switchgear

Packaging Technician

Warehouse Technician

Finance Specialist (6 Months Contract)

General Accounting Senior Analyst

Service Technician

Senior Product Development Engineer

Maintenance Manager

Staff Manufacturing Engineer – Bulk Cable

Senior / Lead Maintenance Technician

Overview: <ul><li>On-site customer work across the EMEA region (Data Centers, Utilities, Oil &amp; Gas) Remote work handling administrative and planning tasks</li><li>Candidates can be based in Ireland, the UK, Netherlands, Poland, or Romania, ideally near a major airport.</li></ul> Responsibilities: <ul><li>Lead installation, maintenance, commissioning, testing, and fault-finding of MV and HV equipment</li><li>Lead installation projects, oversee third-party providers, support fellow engineers, and ensure equipment operates at optimal performance.</li><li>Perform site testing (e.g., insulation resistance, primary/secondary injection, functional testing)</li><li>Provide advanced technical support and root cause analysis for complex power distribution fault</li><li>Review and approve service documentation, test reports, and commissioning records</li><li>Act as the primary customer contact during project execution</li><li>Support and mentor service engineers, promoting safety and best practices</li><li>Collaborate with project teams to meet delivery targets and ensure customer satisfaction</li></ul> Requirements: <ul><li>Higher Diploma or Degree in Electrical Engineering</li><li>Proven experience in power distribution testing and commissioning</li><li>Ability to test and commission large MV to HV installations</li><li>Experience with protection relay programming</li><li>Strong IT skills and attention to detail</li><li>This is a hands-on, customer-facing position suited for candidates with a strong technical background. Skills:</li><li>Strong troubleshooting and problem-solving abilities</li><li>Leadership mindset with the ability to coach and develop others</li><li>Flexibility to travel extensively across the EMEA region</li></ul>

Role Description: <ul><li>The Production Technician II is an advanced-level technician role responsible for sterile pharmaceutical manufacturing operations, with additional expectations for technical troubleshooting, routine maintenance, and active support of qualification activities.</li><li>This position operates in an isolator-based manufacturing environment, works with high potent APIs and controlled substances, and plays a key role in ensuring compliance with cGMP, safety, and site procedures. </li><li>The Production Technician II serves as a technical resource within the production team and supports continuous improvement of manufacturing processes.</li></ul> Responsibilities: <ul><li>Operate, monitor, and adjust sterile manufacturing equipment for formulation, filling, and packaging of IV bag products in compliance with SOPs, cGMP, and safety requirements.</li><li>Perform routine preventive maintenance and minor repairs on production equipment to maintain optimal operating conditions.</li><li>Serve as first-line troubleshooting support for equipment and process issues, escalating to engineering or maintenance as required.</li><li>Support equipment and process qualifications, including protocol review, execution participation, and documentation completion.</li><li>Assist in the creation, revision, and implementation of SOPs and production-related procedures.</li><li>Provide training, guidance, and on-the-job support to Production Technician I personnel.</li><li>Perform cleaning, changeover, and line clearance activities to maintain manufacturing operations.</li><li>Accurately complete batch records, logbooks, and production documentation in compliance with data integrity requirements and cGMP practices.</li><li>Review documentation completed by fellow members of the production team.</li><li>Collaborate with Quality Assurance during in-process checks, deviation investigations, and CAPA activities.</li><li>Adhere to DEA and site procedures for controlled substance handling, including documentation and security protocols.</li><li>Work closely with cross-functional teams including Engineering, Validation, and Quality to support operational readiness.</li><li>Operate isolator technology, including performing and verifying sanitization steps, and supporting advanced troubleshooting.</li><li>Ensure controlled substances are handled, documented, and stored per DEA and site requirements.</li><li>Participate in continuous improvement and lean manufacturing initiatives to enhance safety, quality, and efficiency.</li></ul> Requirements: Qualifications/Experience <ul><li>High school diploma or equivalent required; associate degree or technical certification in a mechanical, engineering, or life sciences discipline preferred.</li><li>Minimum of 5 years’ experience in pharmaceutical or regulated manufacturing in areas of compounding, filling, inspection, and secondary packaging.</li><li>Experience with sterile products or IV bag production preferred.</li><li>Demonstrated mechanical aptitude with hands-on equipment troubleshooting and maintenance skills.</li><li>Knowledge of cGMP, aseptic processing, and controlled substance handling requirements.</li><li>Minimum of 3 years’ experience working with automated production equipment utilizing HMI or SCADA interface required.</li><li>Experience with isolator-based manufacturing strongly preferred.</li><li>Experience reading and following technical documents such as SOPs, maintenance procedures, electrical drawings, equipment arrangements, piping diagrams, and qualification protocols</li></ul> Skills/Competencies <ul><li>Demonstrated problem-solving and mechanical troubleshooting skills.</li><li>Ability to mentor and train less experienced technicians.</li><li>Excellent attention to detail and documentation accuracy.</li><li>Effective communication and teamwork skills.</li><li>Commitment to safety, quality, and data integrity.</li><li>At home working in cleanroom environments with PPE requirements.</li></ul>

Role Description: <ul><li>The Warehouse Technician will be responsible for executing material handling, inventory management, and warehouse operations in support of a sterile pharmaceutical manufacturing facility producing injectable IV bag products, including high potent APIs and controlled substances.</li><li>This role will ensure materials are received, stored, issued, and shipped in compliance with cGMP, DEA, and site safety requirements.</li><li>The Warehouse Technician will play a key role in maintaining accurate inventory records, supporting production schedules, and ensuring the cleanliness, organization, and security of the warehouse.</li></ul> Responsibilities: <ul><li>Receive, inspect, and verify incoming materials, components, and supplies against purchase orders and specifications.</li><li>Ensure proper storage of raw materials, packaging components, and controlled substances in compliance with cGMP, DEA, and safety requirements.</li><li>Accurately issue and deliver materials to production areas based on production schedules and work orders.</li><li>Operate warehouse equipment such as forklifts, pallet jacks, and material handling devices in a safe and compliant manner.</li><li>Perform cycle counts, physical inventory counts, and reconciliation of discrepancies in coordination with Inventory Control.</li><li>Maintain warehouse cleanliness, organization, and environmental conditions per site procedures and regulatory requirements.</li><li>Document all material transactions in the inventory management system, ensuring data accuracy and adherence to data integrity principles.</li><li>Prepare shipments of materials, components, or finished products in compliance with applicable regulations, including hazardous material handling requirements.</li><li>Support material sampling activities, including coordination with Quality Control for testing.</li><li>Assist in warehouse procedure creation, updates, and continuous improvement initiatives.</li><li>Ensure DEA security and access control measures are followed for controlled substances.</li><li>Collaborate with Production, Quality, Planning, and Procurement to ensure timely material availability for manufacturing operations.</li></ul> Requirements: Qualifications/Experience: <ul><li>High school diploma or equivalent required; Associate’s degree preferred.</li><li>Minimum of 2 years of warehouse or material handling experience in a cGMP-regulated pharmaceutical, biotechnology, or related manufacturing environment.</li><li>Experience handling controlled substances and/or high potent APIs preferred.</li><li>Knowledge of cGMP, DEA, and OSHA requirements for material handling and storage.</li><li>Experience operating forklifts and other warehouse equipment; forklift certification preferred.</li></ul> Skills/Competencies: <ul><li>Strong attention to detail and accuracy in documentation and inventory management.</li><li>Familiarity with inventory management systems and ERP software.</li><li>Ability to work effectively in a fast-paced, highly regulated environment.</li><li>Strong organizational skills with the ability to prioritize tasks.</li><li>Good communication and teamwork skills.</li><li>Commitment to safety, compliance, and maintaining a secure warehouse environment.</li><li>Ability to lift and move materials in accordance with safety guidelines.</li></ul>

Responsibilities: <ul><li>Manage AR related activities in SAP including Customer Onboarding (as per policy), customer master database management, Credit Limit mapping, Pricing database update, Sales order release</li><li>Manage AR overdue status, claims processing, collection status, provisioning of doubtful debts, bad debts</li><li>Managing regularly AR balances reconciliations and liaison with commercial team and customers, consultants etc.</li><li>Support at month end for accruals, movements, documentation etc.</li><li>Support in statutory and internal audits related to above areas</li></ul> Requirements: <ul><li>Minimum 3 Years experience of SAP S4 for Sales / AR related Module</li><li>Minimum 3 Years experience of Alco Bev Industry – AR Management standpoint</li><li>Strong analytical skills with the ability to interpret data and drive business decisions.</li><li>Advanced proficiency in Excel and data analytics for reporting, forecasting, and planning.</li><li>Process-driven mindset, ensuring structured execution and business predictability.</li></ul>

Responsibilities: <ul><li>Supervise the general accounting team with 2-7 direct reports, providing leadership, mentorship, and fostering a collaborative work environment to drive performance and professional development.</li><li>Oversee daily financial data entry in the ERP system, ensuring accuracy and completeness. Prepare and post journal entries and manage general ledger account reconciliations to maintain financial integrity.</li><li>Lead the monthly, quarterly, and annual closing processes, ensuring all financial activities are accurately captured. </li><li>Prepare detailed financial data for management review and facilitate necessary adjustments.</li><li>Analyze balance sheet and income statement accounts, providing insightful variance analysis and reports that deliver actionable insights for informed decision-making.</li><li>Review and present financial reports to ensure compliance with accounting standards and local regulations. </li><li>Collaborate with cross-functional teams to integrate financial data and streamline reporting processes.</li><li>Contribute to the development and implementation of policies and procedures for the general accounting function, ensuring alignment with the company’s financial goals and risk management strategies.</li><li>Develop ad-hoc reports and support special projects, such as financial data analysis and process improvements</li></ul> Requirements: <ul><li>Bachelor’s degree in Accounting</li><li>Minimum four (4) years of relevant experience with general accounting.</li><li>Strong analytical skills with the ability to interpret financial data and generate reports.</li><li>Excellent attention to detail and ability to work under tight deadlines</li><li>Demonstrates strong organizational skills with the ability to juggle multiple tasks</li><li>Able to take initiative while fostering a cooperative work environment</li></ul>

Responsibilities: Commissioning &amp; Startup: <ul><li>Installing new UPS systems and energy storage solutions at client sites.
</li></ul> Preventive &amp; Corrective Maintenance:: <ul><li>Conducting battery replacements, system audits, and component repairs to maintain high availability.</li></ul> Troubleshooting: <ul><li>Diagnosing complex electrical and software issues on critical power systems.</li></ul> Customer Support: <ul><li>Delivering technical feedback, creating service reports, and offering solutions to meet customer needs.</li></ul> Safety Compliance: <ul><li>Ensuring all work complies with health and safety standards. </li></ul> Requirements: <ul><li>Technical Education: Background in electrical engineering or equivalent technical field.</li><li>Experience: Previous experience with UPS or power electronics, with roles ranging from entry-level to experienced technicians.</li><li>Skills: Strong diagnostic ability, proficiency with diagnostic tools, and customer service skills.</li><li>Travel: Ability to travel to customer sites as needed</li></ul>

Responsibilities: <ul><li>Manage the complete product development life cycle (starting from voice of customer, ideation, Design Conceptualization, Creation of product specifications, 3D design, Prototyping, Product testing, Product qualification, Project Execution &amp; Sustenance till product end of life)</li><li>Build a deep understanding of market and customer needs by fostering a connection between the business engineering teams and the customer engineering teams</li><li>Work closely with customer/sales/PM in getting the right and clear VOC (voice of customer), make engineering evaluation/proposal to customer.</li><li>Maintain a System level understanding of customer application and the cable design/concept necessary for providing a solution to the customers’ expectation.</li><li>Follow LEANPD Project Process to support project team from PDE perspective to complete Project (NPI or Sustaining) on time, quality and budget.&nbsp;</li><li>Drive the development and release of product, scale-up through stage-gate reviews, ensuring milestone commitments are maintained.</li><li>Technical support to customer, sales, PM and plant team.&nbsp;</li><li>Conduct necessary test, engineering analysis, trouble shooting and verification.</li><li>Work with global manufacturing resources, procurement, and outside suppliers to meet all company technical, quality, and cost objectives</li><li>Introduce breakthrough technologies by partnering technically with our customers worldwide and with our company Global competency centers to enhance business revenue &amp; growth.</li></ul> Requirements: <ul><li>Bachelor degree (Mechanical) required and Master is preferred</li><li>Knowledge about various phases of product realization and product development</li><li>Knowledge of state-of-the-art design tools such as 3D Computer Aided Design (CAD), modelling, Geometric Dimension &amp; Tolerancing (GD&amp;T), electrical &amp; electronic design and Simulation</li><li>Basic knowledge in manufacturing process (machining, molding, stamping, plating, etc.) will be a plus.</li><li>Basic knowledge in material (metal/plastic) properties will be a plus.</li><li>Knowledge of power distribution system and connection components.</li><li>Familiarity with power safety standards and agency approval of power connector/cable/cable assembly.</li><li>Basic FEA simulation on mechanical, mold-flow, and Thermal.</li><li>Familiarity with quality tools (FMEA, 6sigma, DOE, 8D…) will be a plus.</li><li>10+ years working experience as new product development related position and 5+ years of working experience on product developing of RF Products/Antennas.</li><li>Connector, especially Power/Industrial/Auto connector design background will be a plus.</li><li>Experience on power distribution inter/intra system is required.</li><li>This position is highly technical and requires an individual who can work independently.</li><li>Experience on product compliance certification (Product, Safety, Environment substance control)</li><li>Experience in design for manufacturing and assembly (DFMA), design for cost (DFC), design for manufacturing (DFM)</li><li>Application Engineering: Ability to understand customer requirements &amp; offer engineering solutions</li><li>Engineering management across cross functional teams: Developing technical roadmaps to align with market direction &amp; communicating it across business units, management &amp; customers to share applicable technology</li><li>Working together with global team.</li><li>Optimizing engineering &amp; innovation: Defining &amp; managing IP strategy &amp; constantly improving products through R&amp;D</li><li>Quick learning capability: Acquire the necessary skill set, assuring succession &amp; phase in the organization, procedure and culture.</li><li>Quality controller: Ability to assure quality for services, documents and prints.</li><li>Good presentation skills with usage of PowerPoint</li></ul>

Responsibilities: Preventive Maintenance &amp; Operations: <ul><li>Coordinate with Production Scheduling and Value Stream teams to plan PM activities at least 72 hours in advance</li><li>Develop and manage PM schedules within CMMS systems</li><li>Ensure PMs include tasks, BOM, OEM manuals, images, and execution details</li><li>Establish PM audit processes to ensure effectiveness</li><li>Implement visual systems to communicate PM schedules to production teams</li><li>Track and report PM performance metrics (On-Time completion, Schedule Adherence)</li><li>Ensure proper closure of PM work orders to support MTBF, MTTR, and reliability improvements</li><li>Develop PM kitting processes to improve efficiency</li></ul> Leadership &amp; Team Management: <ul><li>Lead, mentor, and manage maintenance teams</li><li>Recognize and reward employee performance</li><li>Drive adherence to company policies and operational procedures</li><li>Support hiring, staffing, and equal opportunity practices</li><li>Conduct performance evaluations and identify training needs</li></ul> Safety, Compliance &amp; Continuous Improvement: <ul><li>Ensure compliance with OSHA, PPE, plant safety systems, ISO, and TS 16949 standards</li><li>Lead TPM initiatives and continuous improvement programs</li><li>Ensure timely completion of safety and quality engagement activities</li></ul> Budget &amp; Stakeholder Management: <ul><li>Manage departmental budgets and cost-saving initiatives</li><li>Prepare reports, maintain records, and handle communications</li><li>Collaborate with external suppliers and OEMs for technical support and training</li></ul>&nbsp;Requirements: Education &amp; Experience: <ul><li>Associate’s Degree + 8+ years of maintenance &amp; leadership experience</li><li>OR</li><li>Bachelor’s Degree in Engineering + 5+ years of experience</li><li>OR</li><li>Equivalent combination of education and experience</li></ul> Technical Expertise: <ul><li>Minimum 5 years of CMMS/database administration experience (Maximo, MP2, Maintenance Connection, eMaint)</li><li>Strong technical writing and documentation skills</li><li>Deep knowledge of maintenance systems, tools, and methodologies</li></ul> Hands-On Experience With: <ul><li>PLC systems</li><li>Electric motors and controllers</li><li>Mechanical, pneumatic, and hydraulic systems</li><li>Vacuum pumps and plant equipment</li></ul> Preferred Skills: <ul><li>Microsoft Office (Excel, Word, Outlook)</li><li>Lean Manufacturing, Six Sigma, 5S (Green Belt preferred)</li><li>Understanding of MTBF, MTTR, and TPM programs&nbsp;</li></ul>

Responsibilities: Core / Daily Operations: <ul><li>Serve as SME for molding and cable over-molding processes</li><li>Develop, optimize, and validate manufacturing parameters and tooling</li><li>Participate in daily operations meetings to resolve process issues quickly</li><li>Ensure processes meet efficiency, quality, and output targets</li><li>Drive improvements in safety, quality, delivery, OEE, scrap, and cost using our client methodologies</li></ul> NPI &amp; Projects: <ul><li>Collaborate with Project Managers on New Product Introduction (NPI) and industrialization</li><li>Develop cost improvement roadmaps for molding, extrusion, and related technologies</li><li>Perform ROI analysis and track cost savings using our client system</li><li>Support annual cost-saving and productivity targets</li></ul> Leadership &amp; Development: <ul><li>Lead and mentor a team of 7–9 engineers/technicians</li><li>Build internal expertise in molding and related processes</li><li>Standardize processes and deliver technical training for production and NPI</li></ul> Technical &amp; Compliance: <ul><li>Support design and development of manufacturing tools and equipment</li><li>Ensure compliance with Health, Safety, and Environmental standards</li><li>Stay updated on new molding and automation technologies</li><li>Act as the regional point of contact for molding-related technical issues</li></ul>&nbsp;Requirements: Education <ul><li>Bachelor’s degree in Mechanical, Electrical, Manufacturing Engineering, or related field</li><li>Master’s degree (automation background) is a plus</li></ul> Experience <ul><li>Minimum 8+ years in manufacturing and molding processes</li><li>Strong experience in cable over-molding and extrusion</li></ul>

Position Summary: <ul><li>The Senior Maintenance Technician will lead maintenance activities in a GMP-regulated pharmaceutical manufacturing environment, ensuring reliable operation of production and facility systems.&nbsp;</li><li>This role focuses on equipment uptime, preventive maintenance, troubleshooting, and continuous improvement of utilities and process equipment—including tablet presses, granulation systems, and HVAC systems supporting cleanroom operations.</li></ul> Responsibilities: <ul><li>Perform and oversee preventive, predictive, and corrective maintenance on pharmaceutical manufacturing and facility equipment.</li><li>Lead troubleshooting and repair efforts on tablet presses, granulators, blenders, fluid bed dryers, coating machines, and other process equipment.</li><li>Maintain and repair facility utilities such as HVAC systems, compressed air, purified water, steam, chilled water, and vacuum systems.</li><li>Support calibration and mechanical integrity programs to ensure GMP compliance.</li><li>Collaborate with Production, Engineering, and Quality departments to minimize downtime and ensure regulatory requirements are met.</li><li>Review and update maintenance SOPs, work orders, and documentation in accordance with cGMP and FDA standards.</li><li>Train and mentor junior technicians and provide technical guidance during shifts or project work.</li><li>Participate in capital projects, equipment installation, and commissioning/qualification activities (IQ/OQ/PQ).</li><li>Identify and implement process improvements to increase reliability and reduce maintenance costs.</li><li>Support environmental monitoring and cleanroom operation standards through proper maintenance of HVAC and filtration systems.</li></ul> Requirements: <ul><li>Associate’s or Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering (or equivalent technical discipline) preferred.</li><li>Experience: Minimum 5–8 years in a maintenance or engineering role within a pharmaceutical, biotech, or GMP manufacturing environment.</li><li>Strong hands-on experience with tablet compression, granulation, and packaging equipment.</li><li>Working knowledge of HVAC systems, cleanroom environments, and associated regulatory requirements (ISO 14644, cGMP).</li><li>Familiarity with CMMS systems (e.g.,, BMRAM, Maximo, SAP PM) and maintenance documentation practices.</li><li>Strong understanding of electrical, mechanical, and pneumatic systems.</li><li>Excellent problem-solving, communication, and leadership skills.</li></ul> Preferred Skills: <ul><li>Knowledge of PLCs and control systems troubleshooting.</li><li>Experience with aseptic or sterile manufacturing utilities.</li><li>Understanding of 21 CFR Part 11 and data integrity principles.</li><li>Root cause analysis and reliability-centered maintenance experience. Key Responsibilities</li></ul>

Skills

Industry

Location

Jobtitle

262 kronos sr technical analyst Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Packaging Technician

Warehouse Technician

Finance Specialist (6 Months Contract)

General Accounting Senior Analyst

Service Technician

Senior Product Development Engineer

Maintenance Manager

Staff Manufacturing Engineer – Bulk Cable

Senior / Lead Maintenance Technician

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

262 kronos sr technical analyst Jobs found

EMEA Field Service Power Distribution Lead Engineer- Switchgear

Packaging Technician

Warehouse Technician

Finance Specialist (6 Months Contract)

General Accounting Senior Analyst

Service Technician

Senior Product Development Engineer

Maintenance Manager

Staff Manufacturing Engineer – Bulk Cable

Senior / Lead Maintenance Technician

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.