Maintenance Engineer (Coating & Welding)

Piping & Valves Engineer

Mechanical Inspector

Electrical Technician (Fabrication, Welding & NDT)

Plant Corrosion Engineer

Mechanical Inspection Specialist

Cost Engineer ( GM )

ASC Cost Engineer

Reliability Engineering (HdGP)

Maintenance Mechanical Engineer

Responsibilities:&nbsp; <ul><li>Provide technical supports in coating and welding, testing and issue related technical reports.</li><li>Provide technical consultation to Shops Operating Repair Units and Contractor Shops.</li><li>Support field installation, maintenance and repair of rotating equipment.</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements.</li><li>Ability to prepare design engineering packages of rotating equipment.</li><li>Preform technical investigation for shop repair return jobs to identify root cause of failure, corrective repair actions and lesson learned.</li><li>Introduce the latest technology in coating and welding methodology.</li><li>Develop and revise department’s technical procedures and standards.</li><li>Provide coaching and knowledge sharing to junior engineers, quality inspectors and technicians.</li><li>Provide technical input for purchasing specifications including technical proposal evaluation.</li><li>Liaise with Department engineers, Consulting Services Department (CSD), other Saudi Departments and manufacturers.</li><li>Liaise with In-House Repair Units, Quality Assurance units, In-Kingdom Contractors and vendor &amp; manufacture in developing, evaluation, and implementing shop repair work scopes.</li><li>Participate in vendor and customer exchange meetings.</li></ul> Requirements: <ul><li>Bachelor Degree in Welding Engineering with a minimum of 15 years’ hands on experience in thermal coating and welding field as stipulated above under position description.</li><li>Experience in thermal coating, laser cladding and welding.</li><li>Experience on rotating equipment with original equipment manufacturing facility or equivalent certified repairing facility.</li><li>Certification in welding from AWS or equivalent.</li><li>Excellent English reading and writing.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Perform external inspections for in-service equipment such as Tube Exchangers, Drums, Columns, Piping and Tanks.</li><li>Perform internal Inspections for Pressure Vessels, Storage Tanks, and Exchangers during T&amp;I.</li><li>Record the results in inspection reports, pre and post testing and inspection (T&amp;I) reports, worksheets in SAIF/SAP.</li><li>Review NDT reports.</li><li>Inspect fabrication work including welding and coatings.</li><li>Communicate defective conditions to the proponent.</li><li>Monitor/Review NDT results to determine defects and issue recommendations for repair or replacement as required.</li><li>Participate in RCA and other technical discussions.</li><li>Maintain and update static equipment/piping records and historical data.</li><li>Verify and approve repair activities on static equipment and piping.</li><li>Perform annual surveys and other field Inspections as per corporate program.</li></ul> Requirements: <ul><li>You must have graduated with a high-school diploma. Associate or Bachelor Degree is a plus but not required.</li><li>You should have a minimum of 15 years of inspection experience, including at least 10 years performing In-Service Inspection in a Refinery.</li><li>You should currently be in a Group leader or supervisory position and leading a team of not less than 10 personals.</li><li>You should have certification in a minimum of 3 API certificates. Preferably 510, 570, 653.&nbsp;</li><li>One International Welding certificate such as AWS, CSWIP or CWB is essential.&nbsp;</li><li>A Coating certificate such as CSWIP, NACE of SSPC is also required.</li><li>Relevant inspection certifications such as RT, UTSW, MT, PT, ET, IR, TOFD, PA, VT Level II are also considered a plus.</li></ul>

Responsibilities :&nbsp; <ul><li>Provides work direction for a crew of 6-10 craftsmen. Evaluates work in progress to control product quality and work team productivity.</li><li>Reviews outstanding work requests to plan manpower assignments and to determine specific requirements for materials, tools, and department.</li><li>Requests materials, tools, and equipment for fabrication work through the SAMS system or through the Maintenance Planner.</li><li>Performs administrative duties as required of Group Head, including report writing and record keeping regarding welding work performed by crews under his supervision.</li><li>Provides technical advice and guidance to lower craftsmen, operations and maintenance to assist in planning T&amp;Is or large fabrication projects.</li><li>Ensures that all craftsmen working under his direction follow safe and proper welding procedures, in adherence to all pertinent company standards.</li><li>Performs on-the-job training and mentoring for lower qualified craftsmen under his direction, and maintains records of on-job training accomplishments of all craftsmen in the unit.</li><li>Troubleshoots and performs the necessary analysis on complex projects to determine (a) if repair is required, (b) nature of repair to be made, and (c) whether repairs will be made in shop or field.</li></ul> Requirements :&nbsp; <ul><li>Associate Degree in Electrical Engineering with a minimum of 10 years’ in fabrication, welding &amp; NDT field as stipulated above under position description.</li><li>Experience in Serving as the technical authority concerning all fabrication, vessel maintenance, equipment installation and repair, and/or testing, inspection, and welding.</li><li>Responsible for directing and controlling the work of 6-10 Welders, Pipefitter/Fabricators, and Field Metals Mechanics in projects involving fabrication of pipe spools and structural steel assemblies or repair of plant piping and equipment.</li></ul>

Overview: We are seeking a Corrosion Engineer to join the Northern Area Corrosion &amp; Inspection Division (NAC&amp;ID), under Northern Area Technical Support Department (NATSD). NATSD provides engineering support for the Northern Area Oil Operations with specialized engineering and technical knowledge in the areas of various disciplines to maximize profitability and meet the highest standards of safety and environment. Responsibilities: <ul><li>Develop Corrosion Management Plans (CMP) for the operating facilities as perstandards</li><li>Develop, implement and maintain corrosion mitigation plans for the operating facilities through chemical treatment (corrosion inhibitors, scale inhibitors, biocides, oxygen scavenger etc.), coating and material selection</li><li>Conduct assessments for onshore and offshore facilities.</li><li>This includes scheduling the implementation of initial/evergreening assessments, facilitating the data collection and entry into the software etc.</li><li>Develop and implement corrosion monitoring plans for the operating facilities using corrosion coupons, corrosion probes</li><li>Carry out failure investigation and provide recommendations to prevent failures and improve integrity of the plants and pipelines Develop, maintain and optimize On-Stream Inspection (OSI) programs for the facilities</li><li>Support facility improvements by reviewing design packages for maintain potential and new projects and providing comments related to corrosion monitoring, corrosion mitigation plans including but not limited to material selection, installation of Corrosion Monitoring systems (CMS), Chemical Treatments, Corrosion Risk Management, OSI etc.</li><li>Work with inspection during plant shutdown and during turnaround and inspection (T&amp;I) for evaluation of internal and external corrosion issues and coating assessments</li></ul> Requirements: <ul><li>As the successful candidate you Will hold a Bachelor’s degree in materials, metallurgical or chemical engineering (or other relevant discipline) with a focus on corrosion.</li><li>Shall have NACE senior Corrosion Technologist certification. NACE specialist certifications would be considered advantageous</li><li>Should have a Minimum of 15 years’ experience in the oil &amp; gas industry.&nbsp;</li><li>At least 5 years’ experience in Risk-Based Inspection analysis methodology including qualitative and quantitative/semi-quantitative assessment skills of the probability of failure (PoF) and the consequence of failure (CoF).</li><li>You should have API-580 certification.</li><li>Must have a Knowledge of internal and external corrosion mechanisms common to upstream oil and gas industry and corresponding corrosion management</li><li>Must have a Knowledge of corrosion mitigation (coating, cathodic protection, chemical inhibition and material selection) &amp; corrosion monitoring techniques (coupons, probes, on-stream inspection, in-line inspection, etc.)</li><li>Are familiar with government regulations and industry codes and standards (NACE, API, ASME, etc.), specifically regarding equipment integrity</li><li>Have a working experience of reviewing the project proposal, projects design, and detail design and construction stages</li></ul>

Responsibilities: <ul><li>Review &amp; monitor quality control programs developed by construction contractors.</li><li>Review QAC programs, design drawings, engineering specifications, waiver requests &amp; standards.</li><li>Perform inspections of advanced, more complex nature.</li><li>Train personnel to develop technical ability and understanding in various disciplines and NDT methods.</li><li>Conduct mechanical inspection including tanks, vessel, coolers, exchanger, sumps, flare, piping, pipeline and …etc.</li><li>Conduct coating activities per S.A requirements.</li><li>Be familiar with SAIF/SAP system to run inspection activities such issue pre T&amp;I , T&amp;I package , Post T&amp;I , Defect Notifications , EIS review , external and .and etc…</li><li>Conduct RTR Installation &amp; Inspection</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Mechanical Engineering&nbsp;</li><li>Have SA Coating Inspector Level 1 or CSWIP-BGAS Gr2 or NACE CIP-1 or SSPC PCI-1 or equivalent,</li><li>Have CSWIP 3.1 or CWI/AWS inspector</li><li>&nbsp;Two of API 570 or API 653 or API 510</li><li>&nbsp;NDT LVL II (UT, PT, MT, VT, RTFI)</li><li>&nbsp;You will also have a minimum 5 years of inspection experience with BSc Mechanical Engineering degree or 10 years of experience with diploma in Mechanical&nbsp;&nbsp;</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: <ul><li>Provide technical expertise to reduce repetitive failures of rotating equipment in addition of supporting plant maintenance activities implanting reliability program to improve plant performance.</li><li>Coordinates maintenance programs with user units to determine relative priorities and on-time completion of work in critical operating facilities with available work force.</li><li>Plans assigned T&amp;Is field-wide, analyses and sequences all work requests; estimates required manpower, justifying when necessary requests for additional manpower, overtime or extension of unit downtime.</li><li>Assures that all details of material and equipment are available at jobsite. On major T&amp;Is, he may direct one or more Maintenance Engineer III in accomplishing this phase of the work.</li><li>Execute the actual work during a T&amp;I period, coordinates activities of assigned craftsmen and such other personnel as are assigned (night shift coordination, etc.) to assist in the execution of the work.</li><li>Incumbent may act as the day shift coordinator on T&amp;Is or direct the activities of one or more Maintenance Engineer IIIs assigned to this phase of the work.</li><li>Report to concerned Maintenance Supervisor on quality and quantity of workmanship and adherence to standards by Maintenance Engineer III and craftsmen within his assigned areas and recommends improved work methods.</li><li>Reports on deviation from approved schedules and assists in the correction of such deviations</li><li>Review Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Coordinate maintenance work between Maintenance Divisions when services from various divisions are required.</li><li>Perform special assignments as directed, utilizing his engineering knowledge and experience. </li><li>Such assignments may include work direction to one or more Maintenance Engineer IIIs.</li><li>Application of Maintenance Engineer when specializing in Digital Maintenance Engineering Performs engineering analysis of real time, process control digital systems in central operations facilities to aid in fault diagnosis. Evaluates</li><li>Maintenance activity on digital systems.</li><li>Provides professional level expertise to the solution of complex hardware problems.&nbsp;</li><li>Responsible, under the general direction of Superintendent in assigned Maintenance Division and with work direction from maintenance.</li></ul> Requirements: <ul><li>The successful candidate should hold a minimum of Bachelor Degree in Mechanical Engineering. Fifteen (15) years of experience in Oil &amp; Gas or Petrochemical Industry.</li><li>In addition, the candidate should be certified Maintenance &amp; Reliability Professional (CMRP) and TapRooT Analyst.</li><li>Also, the candidate should be good spoken and written of English language.</li></ul>

Responsibilities :&nbsp; <ul><li>Provide technical supports to repair and overhaul of rotating equipment such as dismantling, diagnosing, assembling, testing and issue related technical reports.</li><li>Provide technical consultation to Shops Operating Repair Units and Contractor Shops.</li><li>Support field installation, maintenance and repair of rotating equipment.</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements.</li><li>Ability to prepare design engineering packages of rotating equipment.</li><li>Preform technical investigation for shop repair return jobs to identify root cause of failure, corrective repair actions and lesson learned.</li><li>Introduce the latest technology in repair methodology.</li><li>Develop and revise department’s technical procedures and standards.</li><li>Provide coaching and knowledge sharing to junior engineers, quality inspectors and technicians.</li><li>Provide technical input for purchasing specifications including technical proposal evaluation.</li><li>Liaise with Department engineers, Consulting Services Department (CSD), other Saudi our client Departments and manufacturers.</li><li>Liaise with In-House Repair Units, Quality Assurance units, In-Kingdom Contractors and vendor &amp; manufacture in developing, evaluation, and implementing shop repair work scopes.</li><li>Participate in vendor and customer exchange meetings.</li></ul> Requirements :&nbsp; <ul><li>Bachelor Degree in Mechanical Engineering with a minimum of 15 years’ hands on experience in Mechanical field as stipulated above under position description.</li><li>Experience in the mechanical design, troubleshooting and major repair of oil and gas rotating equipment such as gas compressors, steam turbine and pump and gearbox.</li><li>Experience on rotating equipment with original equipment manufacturing facility or equivalent certified repairing facility for steam turbines and gas compressors and diesel engines.</li><li>Excellent English reading and writing</li></ul>

Skills

Industry

Location

Jobtitle

308 maintenance engineer coating welding Jobs found

Maintenance Engineer (Coating & Welding)

Piping & Valves Engineer

Mechanical Inspector

Electrical Technician (Fabrication, Welding & NDT)

Plant Corrosion Engineer

Mechanical Inspection Specialist

Cost Engineer ( GM )

ASC Cost Engineer

Reliability Engineering (HdGP)

Maintenance Mechanical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

308 maintenance engineer coating welding Jobs found

Maintenance Engineer (Coating & Welding)

Piping & Valves Engineer

Mechanical Inspector

Electrical Technician (Fabrication, Welding & NDT)

Plant Corrosion Engineer

Mechanical Inspection Specialist

Cost Engineer ( GM )

ASC Cost Engineer

Reliability Engineering (HdGP)

Maintenance Mechanical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.