Senior Microbiology Technician

Front of House Coordinator

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

Supplier Quality Engineer

Client Advisor/Senior Client Advisor - Full Time/Part time

Responsibilities: <ul><li>Perform and oversee complex microbiological activities, including environmental monitoring (viable and non-viable), utility sampling (e.g., water, compressed gases), and aseptic process support in areas utilizing isolator technology.</li><li>Conduct and review microbiological testing for bioburden, endotoxin (LAL), sterility, and microbial identification on raw materials, in-process samples, and final products.</li><li>Support and lead aspects of aseptic process simulations (media fills) including planning, execution, incubation, and interpretation of results within isolator systems.</li><li>Assist in the startup and qualification of the microbiology laboratory including equipment qualification, SOP development, method verification/validation, and environmental monitoring qualification.</li><li>Contribute to investigations, non-conformances, and microbiological excursions by providing subject matter expertise and supporting root cause analysis and CAPA implementation.</li><li>Ensure accurate and timely documentation of laboratory data in compliance with data integrity principles and cGMP guidelines.</li><li>Mentor and provide technical guidance to junior microbiology staff, fostering a culture of scientific excellence, compliance, and continuous learning.</li><li>Maintain laboratory readiness for internal and external audits by following and enforcing good laboratory practices and cGMP expectations.</li><li>Participate in ongoing improvements to laboratory procedures, contamination control strategies, and sterility assurance programs.</li><li>Interface cross-functionally with Quality Assurance, Manufacturing, Validation, and Engineering to support cleanroom and equipment qualifications, isolator decontamination cycles, and site expansion activities.</li></ul> Requirements: Qualifications/Experience: <ul><li>Bachelor’s degree in microbiology, Biology, Life Sciences, or a related field.</li><li>Minimum of 3-5 years of microbiology laboratory experience in a cGMP pharmaceutical or biotechnology manufacturing environment.</li><li>Experience with isolator-based sterile manufacturing processes and aseptic support activities is strongly preferred.</li><li>Working knowledge of cGMPs, FDA and EU Annex 1 requirements, and microbiological standards (USP &lt;61&gt;, &lt;62&gt;, &lt;71&gt;, &lt;85&gt;, &lt;1116&gt;).</li><li>Experience supporting laboratory equipment startup, qualification, and routine maintenance preferred.</li><li>Prior experience with high potent APIs and/or controlled substances is desirable.</li></ul> Skills/Competencies: <ul><li>Advanced technical skills in environmental monitoring, microbial testing, and aseptic processing support.</li><li>Strong documentation and data integrity skills with a meticulous attention to detail.</li><li>Demonstrated ability to troubleshoot microbiological and laboratory equipment issues.</li><li>Effective time management and prioritization skills in a fast-paced environment.</li><li>Strong communication skills with the ability to train and mentor junior staff.</li><li>Proactive, collaborative, and compliance-oriented mindset.</li><li>Comfortable working in cleanroom environments and adhering to gowning and contamination control protocols.</li></ul>

Role Description: <ul><li>The driving force behind the scanning platform at Client Dive into the forefront of innovation with our Gateway Security team, where we scan massive volumes of email traffic for our customers! Our pioneering Email Platform pushes on the boundaries of what’s possible, leveraging the latest technologies and tooling in AWS. Why Join Our Team? “The Gateway Security team, within the Threat Protection group, is responsible for developing the cutting edge scanning technology at the heart of Client protection stack, scanning over 2 billion emails, files, and URLs daily.</li><li>If you’re interested in solving customer challenges at immense scale, then this is the role for you!”</li></ul> Responsibilities: <ul><li>Initial point of contact for all Client in the Bengaluru office.</li><li>Be part of the global Client facilities team and assist the teams in other regions as required.</li><li>Coordinate first aid and fire safety as per building and statutory requirements.</li><li>Meet and greet clients and visitors, ensure Client visitor processes are followed.</li><li>Ensure effective and professional telephone communications by answering any incoming calls, taking messages and/or forwarding to the individual.</li><li>Sort daily post/deliveries/couriers, manage invoicing from landlord and suppliers.</li><li>Arrange catering for meetings and events as required.</li><li>Ensure daily checks of offices and kitchen areas, purchase office consumables as required, including beverages and food items and refreshment facilities.</li><li>Ensure the office is consistently kept in the best state including periodic checks of cleaning and maintenance with landlord and appointed contractors.</li><li>Liaise with building management, submitting maintenance request’s and raising permits.</li><li>Work with Regional IT and liaise with regional team and suppliers, including issuance of staff access passes, assist with supply and return of IT equipment and access for maintenance contractors.</li><li>Help out with planning of company events.</li><li>Within this position, the successful candidate will also be tagging assets, taking count of returned items - fixed asset management duties are listed in the job spec.</li><li>Including: new assets being purchased and a log of asset tags will need to be maintained.&nbsp;</li></ul> Requirements: <ul><li>2 – 4 years of administrative experience.&nbsp;</li><li>Proficiency with Microsoft Office, Word, Excel, and PowerPoint&nbsp;</li><li>Outstanding organizational skills, accuracy and attention to detail and the ability to multitask.</li><li>Written and verbal skills with strong grammatical, proofreading, typing and note taking skills.</li><li>Ability to work independently, flexibly and use discretion.</li><li>Excellent interpersonal skills, including a pleasant positive demeanor and a proactive approach.</li><li>A solid understanding of the goals and objectives of the business and their own personal goals.</li><li>Recognize that customer satisfaction is a principle measure of our business and our values.</li><li>Instinctively find practical solutions to complex problems.</li><li>Expect to encounter change and take ownership of your job.&nbsp;</li><li>Find new ways to win and share those victories with the team.&nbsp;</li></ul>

Responsibilities: <ul><li>At our client, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.&nbsp;</li><li>Drives the implementation of programs and projects to improve products and processes and develops deployment plans.&nbsp;</li><li>Digital Factory transformation project followed APAC and Internal plant.direction.&nbsp;</li><li>Daily trouble shooting in production, provide short term &amp; long term solution to team.&nbsp;</li><li>Suggest &amp; drive improvements digital solution.&nbsp;</li><li>Support project assignment.&nbsp;</li></ul> Requirements:&nbsp; <ul><li>Plant digitals, cooperate with APAC and our client service team for transformation project.&nbsp;</li><li>Digital factory transformation project implementation, Identify and resolve issue during implementation.&nbsp;</li><li>Training on new digital tools and technologies. Develop training material and provide training to ensure fully utilization.&nbsp;</li><li>Maintain and troubleshooting for exiting digital tools, AGV, Material Calling System, Hydra, dPIM etc.&nbsp;</li><li>Continuous Improvement, identify new opportunities and innovation in operation processes.&nbsp;</li><li>Data analysis and monitoring, Operations Scorecard, Operation Dashboard (SCCOP, SHE, OEE) and advise weakness areas for improvement.&nbsp;</li><li>Handle on CER related /CI working with operations and cross functional team.&nbsp;</li><li>Support operations project assignment.&nbsp;</li></ul> What your background should look like&nbsp; <ul><li>Bachelor’s Degree in Information Technology, Computer science or related field.&nbsp;</li><li>Strong knowledge and experiences in Digital transformation projects.&nbsp;</li><li>Familiarity with digital tools and technologies used in manufacturing.&nbsp;</li><li>Minimum 3 to 6 years working experience in manufacturing sector.&nbsp;</li><li>Knowledge of in cloud technology, virtualization, mobile application, IOT, SQL Server.&nbsp;</li><li>Reporting Services, Power BI, Tableau.&nbsp;</li><li>Good knowledge in Data Storage, Cloud, Microsoft Power Apps.&nbsp;</li><li>Good knowledge in Dashboard creation, Graphic and User Interface (UI) design.&nbsp;</li><li>New enhancement for new functionality in SAP and Hydra.&nbsp;</li><li>OEE, Utilization analysis skill.&nbsp;</li><li>Knowledge and experiences in Enterprise Resource Planning software – SAP/BOM/Routing will be advantage.&nbsp;</li><li>Logical thinking with Project Management Skill.&nbsp;</li><li>Fluent in English and good communication.&nbsp;</li><li>Interpersonal skills.&nbsp;</li></ul>

Responsibilities: <ul><li>Be part of a diverse and collaborative team consisting of engineers, a product manager and a designer.</li><li>Provide technical direction to the team, detecting technical improvement opportunities and taking action to design and implement them.</li><li>Mentor or coach other engineers to support their growth and bring them along</li><li>Design and develop features, APIs, and fixes to handle our current and future scale.</li><li>Help our customers have a great experience products.</li><li>Be a strong independent contributor.</li><li>Participate in and help improve the team’s agile process.</li><li>Engage with the support team as the last level of escalation for tickets.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in software development.</li><li>Must have 7+ years of experience with Node.JS/Javascript/Typescript ecosystem</li><li>5+ years of experience in Postgres and Redis.</li><li>Excellent communication and collaboration skills&nbsp;&nbsp;</li><li>Expertise in designing, building and maintaining public or internal APIs with focus on security and performance.</li><li>Solid understanding of the Node.JS/Javascript/Typescript ecosystem</li><li>A bias for well tested code and relevant unit/integration/end to end/performance testing experience</li><li>The drive for designing and building highly reliable, scalable, and secure systems</li><li>A mindset for sharing knowledge and supporting the growth of others around you</li><li>Strong context switching capabilities to be able to contribute to several projects at once, within and beyond the team subdomain</li><li>An owner mentality- you hold yourself accountable and have a relentless commitment to loving your customers</li></ul>

Responsibilities: <ul><li>Build secure, performant, cross-platform applications for both customers and internal company teams.</li><li>Collaborate across teams to solve technical and non-technical challenges.</li><li>Work closely with Product and Design to determine and optimize user experience and information architecture.</li><li>Build new features and maintain existing features by contributing across the full technical stack.</li><li>Debug and resolve production issues and implement fixes for them.</li><li>Be a part of the teams on-call rotations.</li><li>Evaluate new technologies and techniques to improve overall practices.</li></ul> Requirements: <ul><li>Must have 7+ years of expertise in full-stack development.</li><li>Have a passion for learning.</li><li>Have excellent communication and collaboration skills.</li><li>Are customer-obsessed and love helping people.</li><li>Have a good understanding of Javascript and TypeScript.</li></ul>

Responsibilities: <ul><li>Support bulk cable team by tracking quality, compiling reports, assist with DOEs and product qualification</li><li>Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Implement quality planning and controls for prototype and/or sample builds.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Coordinate sample preparation and certification for product verification and qualification testing.</li><li>Conduct and analyze process capability studies in support of Final Tool Approval (FTAR) for all tools and production lines associated with the project using the Comprehensive Tool Approval Report (CTAR).</li><li>Collaborate with MPDE, monitor process capability/data and oversee ongoing corrective actions as required.</li><li>Collaborate with corporate UL team / UL engineer/PJE/PQE for new certification. -Collaborate with PDE, analyze physical/SI data and make qualification report.</li><li>Collaborate with PDE, CA PDE/SI/MPDE, support SQE on outsourced cable quality control and improvement from bulk cable engineering side.</li><li>Preparation for prototype/sample making: -Organize and facilitate Design Review (DR) and Design Failure Modes &amp; Effects Analysis (DFMEA) reviews.</li><li>Complete measurement system analysis for inspection systems and gages to be utilized for the project.</li><li>Data Analysis:Monitor process physical/SI data.</li><li>Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.</li><li>Review 108 and finish 501 documents per customer requirement and industrial standards.</li><li>Coordinator during prototype/sample making: -Monitor process capability and oversee ongoing corrective actions as required.</li><li>Support MPDE on FACA.</li><li>Support PDE on design improvement.</li><li>Coordinator during outsourced cable qualification process:Review outsourced cable Physical data, SI data, Reliability data, stability data, give comments from bulk cable engineering side on supplier quality and product quality.</li></ul> Requirements:﻿ <ul><li>Bachelors or Masters Degree in science or technology.</li><li>10 years min. working experience in bulk cable design or manufacturing.</li><li>3 years team management experience.</li><li>Familiar with bulk cable knowledge, bulk cable manufacturing knowledge and machines knowledge.</li><li>Can work under the pressure.</li><li>Drive for results, good problem solving skills</li><li>Good communication skill, integrity, accountability and passion, Integrity, ccountability, team work</li><li>Good communication, interpersonal and management skills</li></ul>

Responsibilities: <ul><li>Collaborate with engineering, production, and planning teams to continuously improve product quality across the manufacturing process.</li><li>Supervise and manage the incoming and final inspection areas.</li><li>Drive improvement initiatives within incoming, in-process, and final inspection operations.</li><li>Prioritize inspection activities to ensure timely completion of production materials, engineering validations, and gage R&amp;Rs.</li><li>Identify and execute containment actions for nonconforming materials found during in-process or final inspections.</li><li>Work with cross-functional teams to investigate nonconforming products using root cause analysis tools (Ishikawa, 5-Whys, Is-Is Not, etc.) and implement corrective and preventive actions.</li><li>Communicate with customers regarding product-related complaints and facilitate evaluation and return of materials as needed.</li><li>Investigate product quality issues related to customer returns (e.g., nonconforming material reports, corrective actions).</li><li>Create and update operations procedures and documentation used within production.</li><li>Ensure compliance with quality assurance policies and procedures to meet or exceed customer expectations.</li><li>Implement continuous improvement initiatives to reduce defects, improve efficiency, and enhance product quality.</li><li>Conduct manufacturing and quality system audits to ensure compliance with ISO 13485.</li><li>Support operational projects such as Kaizen, data analysis, and problem-solving initiatives.</li></ul> Requirements: Qualifications/Background: <ul><li>Bachelor’s degree in Quality, Science, or Engineering preferred (High School Diploma with equivalent experience will be considered).</li><li>Prior experience as a Quality Engineer in a manufacturing environment.</li><li>5+ years of industry experience in a medical device manufacturing or pharmaceutical environment.</li><li>Supervisory or management experience preferred.</li><li>Working knowledge of FDA, ISO, and MDD quality systems applicable to medical device companies.</li><li>Excellent written and verbal communication skills.</li></ul>

Responsibilities: <ul><li>Act as a single-point-of-contact for topics and issues related to supplier quality within the Heredia, Costa Rica facility.</li><li>Lead supplier-related activities to ensure incoming quality is proactively planned, prepared, and ensured in advance before production part is approved and released.</li><li>Continually improve supplier performance through coaching, training, consequence enforcement, supplier awards and motivation, supplier restriction and disqualification, etc.</li><li>Measure and communicate supplier performance to those suppliers and the organization.</li><li>Evaluate, qualify, approve appropriate new, competitive suppliers (including search for new suppliers), in collaboration with the procurement teams.</li><li>Review and approve/reject/amend supplier Production Part Approval Process (PPAP) submissions for new product releases and qualifying changes to existing components.</li><li>Monitor quality data within the operating systems to ensure data accuracy and develop reporting systems to accurately document and record supplier trends and performance.</li><li>Periodically monitor quality specifications to ensure supplier compliance.</li><li>Work with engineering to clarify and change specifications regarding incoming goods when necessary.</li><li>Clearly communicate (and enforce) company requirements and expectations to suppliers.</li><li>Solicit, drive, monitor, review, approve, and validate containment/corrective/preventive actions by suppliers.</li><li>Facilitate supplier quality roadmaps leading to improved supplier performance.</li><li>Conduct process and system audits of suppliers and maintain working knowledge of ISO and TS quality system requirements.</li><li>Serve as Supplier Quality Lead / SME during internal audits and 3rd party inspections/audits (FDA, BSI).</li><li>Chair QBRs (Quarterly Business Reviews) with key suppliers.</li><li>Validate manufacturing and supplier processes, including activities associated with equipment installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ).</li><li>Interact with cross-functional teams to resolve supplier-related quality issues.</li></ul> Requirements: Qualifications &amp; Background: <ul><li>Bachelor’s degree in Process Engineering, Manufacturing Engineering, or other engineering discipline plus 5+ years’ experience in a manufacturing environment.</li><li>Working knowledge and understanding of the Food and Drug Administration (FDA) 21 CFR 820 and International Organization for Standardization (ISO) – ISO 13485 and ISO 14971.</li><li>Bilingual (English / Spanish).</li><li>Experience in a Supplier Management role.</li><li>Experience conducting quality audits in a manufacturing environment.</li><li>Lean Six Sigma Green Belt Certification.</li><li>Proficiency in Microsoft Office.</li><li>Strong problem-solving and analytical skills for compiling and analyzing data.</li><li>Knowledge of DOE, SPC, Gage R&amp;R, and sampling plans.</li><li>Effective time management skills, applied to fast-moving and high-pressure environments.</li><li>Ability to work independently with little or no supervision, as well as in teams.</li><li>Willingness to travel (approximately 10%) to visit suppliers.</li></ul>

Responsibilities: <ul><li>Develops store business through excellent clienteling and KPIs performance (conversion rate, cross selling, AVT, upselling, strategic zoning).</li><li>Offer and excellent level couture service at all times across all categories.</li><li>Mentors other client advisors on journey and KPI improvement and is a key teamplayer</li><li>Foster sales in partnership and OTO appointment routine.</li><li>Naturally integrates digital tools in selling and clienteling activities.</li></ul> Requirements: <ul><li>Has a proven selling and clienteling skills.</li><li>Has a collaborative mindset.</li><li>Has excellent communication and story telling skills.</li><li>Is able to sell all categories.</li><li>Strong product knowledge to support the team in product maintenance, replenishment, display.</li><li>Is a contributor to the correct operations of the store.&nbsp;</li></ul>

Responsibilities: <ul><li>Develops store business through excellent clienteling and KPIs performance (conversion rate, cross selling, AVT, upselling, strategic zoning).</li><li>Offer and excellent level couture service at all times across all categories.</li><li>Mentors other client advisors on journey and KPI improvement and is a key teamplayer</li><li>Foster sales in partnership and OTO appointment routine.</li><li>Naturally integrates digital tools in selling and clienteling activities.</li></ul> Requirements: <ul><li>Has a proven selling and clienteling skills.</li><li>Has a collaborative mindset.</li><li>Has excellent communication and story telling skills.</li><li>Is able to sell all categories.</li><li>Strong product knowledge to support the team in product maintenance, replenishment, display.</li><li>Is a contributor to the correct operations of the store.&nbsp;</li></ul>

Skills

Industry

Location

Jobtitle

148 maintenance engineer upstream Jobs found

Senior Microbiology Technician

Front of House Coordinator

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

Supplier Quality Engineer

Client Advisor/Senior Client Advisor - Full Time/Part time

Client Advisor/Senior Client Advisor - Full Time/Part time

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

148 maintenance engineer upstream Jobs found

Senior Microbiology Technician

Front of House Coordinator

Digital Factory Engineer

Staff Software Engineer(Enterprise)

Staff Software Engineer (Auth0)

Staff Quality & Reliability Engineer

Supervisor – Quality & Reliability Engineering

Supplier Quality Engineer

Client Advisor/Senior Client Advisor - Full Time/Part time

Client Advisor/Senior Client Advisor - Full Time/Part time

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.