Maintenance Mechanical Engineer

Cost Engineer ( GM )

Maintenance Engineer III (Mechanical)

ASC Cost Engineer

Reliability Engineering (HdGP)

Piping & Valves Engineer

Senior Project Engineer

Mechanical Engineer

Reliability Engineer

Reliability/Mechanical Engineer

Responsibilities :&nbsp; <ul><li>Provide technical supports to repair and overhaul of rotating equipment such as dismantling, diagnosing, assembling, testing and issue related technical reports.</li><li>Provide technical consultation to Shops Operating Repair Units and Contractor Shops.</li><li>Support field installation, maintenance and repair of rotating equipment.</li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements.</li><li>Ability to prepare design engineering packages of rotating equipment.</li><li>Preform technical investigation for shop repair return jobs to identify root cause of failure, corrective repair actions and lesson learned.</li><li>Introduce the latest technology in repair methodology.</li><li>Develop and revise department’s technical procedures and standards.</li><li>Provide coaching and knowledge sharing to junior engineers, quality inspectors and technicians.</li><li>Provide technical input for purchasing specifications including technical proposal evaluation.</li><li>Liaise with Department engineers, Consulting Services Department (CSD), other Saudi our client Departments and manufacturers.</li><li>Liaise with In-House Repair Units, Quality Assurance units, In-Kingdom Contractors and vendor &amp; manufacture in developing, evaluation, and implementing shop repair work scopes.</li><li>Participate in vendor and customer exchange meetings.</li></ul> Requirements :&nbsp; <ul><li>Bachelor Degree in Mechanical Engineering with a minimum of 15 years’ hands on experience in Mechanical field as stipulated above under position description.</li><li>Experience in the mechanical design, troubleshooting and major repair of oil and gas rotating equipment such as gas compressors, steam turbine and pump and gearbox.</li><li>Experience on rotating equipment with original equipment manufacturing facility or equivalent certified repairing facility for steam turbines and gas compressors and diesel engines.</li><li>Excellent English reading and writing</li></ul>

Responsibilities: <ul><li>As the successful candidate you will be required to perform the following:</li><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul>&nbsp;Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities : <ul><li>Provide consultation in all aspects of normal and emergency plant maintenance procedures and standards</li><li>Provide technical support to maintenance and machine shop daily operation</li><li>Support installation, maintenance and repair of rotating equipment </li><li>Troubleshoot, repair, modify existing equipment and Identify cost reductions &amp; process improvements </li><li>Introduce the latest technology in repair methodology</li><li>Ability to design engineering packages</li><li>Provide coaching and knowledge sharing to Junior Engineers</li><li>Participate in vendor and customer exchange meetings</li><li>Participate in standards value engineering</li></ul> Requirements : <ul><li>Bachelor’s Degree in Mechanical Engineering with a minimum of Five years’ hands on experience in Mechanical field as stipulated above under position description. Candidate must have the following the field experience requirements.</li><li>Experience in the mechanical design, troubleshooting and major repair of oil and gas rotating equipment such as Gas and Steam turbine.&nbsp;</li><li>Experience in manufacturing with OEM (original equipment manufacturing) facility such as, GE, Siemens, MHI, BH etc.</li><li>Excellent English reading and writing.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Assist in establishing estimating standards and strategies for maintenance work and turnaround in order to optimize cost and reduce risks.</li><li>Review bottom up estimate for yearly budget for maintenance.</li><li>Review bottom up estimate for planned turnaround.</li><li>Assist in establishing guidelines for yearly budgeting for maintenance and turnaround.&nbsp;&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to prepare / review / finalize initial yearly maintenance budget and turnaround budget.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to review / finalize mid-year and Year-end budget.</li><li>Carryout spending analysis and find out areas of improvement for cost savings and improvement.</li><li>Carryout replacement vs maintenance cost of assets.&nbsp;</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer / Contract Advisor to estimate contract cost in proposal stage.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to evaluate price bid from cost engineering point of view.</li><li>Coordinate and work closely with Contract Advisor / Contract Engineer to prepare and establish cost evaluation criteria.</li><li>Assist in preparing, developing and measuring Key Performance Indicators for cost performance.&nbsp;</li><li>Maintain computer records of cost estimating standards and guidelines.</li><li>Coordinate and work closely with Maintenance Engineer / Turnaround Engineer to monitor cost at regular interval and produce periodic cost report.</li></ul> Requirements: <ul><li>As the successful candidate you must hold a Bachelor degree in Engineering, preferably in Mechanical, Electrical, Industrial, Construction, Production or closely related discipline.</li><li>You should have Minimum of 10 years cost engineering experience in maintenance and turnaround.</li><li>Experience in cost benchmarking such as Solomon will be an advantage.</li><li>You should be familiar &amp; experienced with contracting process and cost engineering in contracting.</li><li>You should be experienced in carrying out bottom up estimate for yearly budget for maintenance as well as planned turnaround.</li><li>You should also be experienced in the use of cost estimating tools and the application of market conditions and risk management to estimates.</li><li>Experienced &amp; knowledge in computer-estimating programs, such as Aspentech CCE (Capital Cost Estimator), etc. and shall be familiar with estimate databases such as Richardson or similar is required.</li><li>You should be experienced with SAP system.&nbsp;</li><li>Certification in Project Management Professional (PMP), AACE-CCP (American Association of Cost Engineers – Certified Cost Professional) or AACE-CEP (American Association of Cost Engineers – Certified Estimating Professional) will be preferred.</li></ul>

Responsibilities: <ul><li>Provide technical expertise to reduce repetitive failures of rotating equipment in addition of supporting plant maintenance activities implanting reliability program to improve plant performance.</li><li>Coordinates maintenance programs with user units to determine relative priorities and on-time completion of work in critical operating facilities with available work force.</li><li>Plans assigned T&amp;Is field-wide, analyses and sequences all work requests; estimates required manpower, justifying when necessary requests for additional manpower, overtime or extension of unit downtime.</li><li>Assures that all details of material and equipment are available at jobsite. On major T&amp;Is, he may direct one or more Maintenance Engineer III in accomplishing this phase of the work.</li><li>Execute the actual work during a T&amp;I period, coordinates activities of assigned craftsmen and such other personnel as are assigned (night shift coordination, etc.) to assist in the execution of the work.</li><li>Incumbent may act as the day shift coordinator on T&amp;Is or direct the activities of one or more Maintenance Engineer IIIs assigned to this phase of the work.</li><li>Report to concerned Maintenance Supervisor on quality and quantity of workmanship and adherence to standards by Maintenance Engineer III and craftsmen within his assigned areas and recommends improved work methods.</li><li>Reports on deviation from approved schedules and assists in the correction of such deviations</li><li>Review Project Proposals to assure that maintenance aspects are considered in final design.</li><li>Coordinate maintenance work between Maintenance Divisions when services from various divisions are required.</li><li>Perform special assignments as directed, utilizing his engineering knowledge and experience. </li><li>Such assignments may include work direction to one or more Maintenance Engineer IIIs.</li><li>Application of Maintenance Engineer when specializing in Digital Maintenance Engineering Performs engineering analysis of real time, process control digital systems in central operations facilities to aid in fault diagnosis. Evaluates</li><li>Maintenance activity on digital systems.</li><li>Provides professional level expertise to the solution of complex hardware problems.&nbsp;</li><li>Responsible, under the general direction of Superintendent in assigned Maintenance Division and with work direction from maintenance.</li></ul> Requirements: <ul><li>The successful candidate should hold a minimum of Bachelor Degree in Mechanical Engineering. Fifteen (15) years of experience in Oil &amp; Gas or Petrochemical Industry.</li><li>In addition, the candidate should be certified Maintenance &amp; Reliability Professional (CMRP) and TapRooT Analyst.</li><li>Also, the candidate should be good spoken and written of English language.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: <ul><li>Working with team to carry out related projects</li><li>Getting technical detail decisions,</li><li>Coordinating with Production, Supply Chain and Finance teams to make the project work.</li><li>Solving time management and commissioning problems together with the team</li><li>Managing and following KPIs of Project and Maintenance teams</li><li>Taking all actions within the factory according to HSE, OHSAS and ISO standards</li><li>Leading of improvement projects within the framework of Hygienic Design</li><li>Following controls of purchasing, inventory and spare parts</li><li>Controlling and leading project and maintenance budget request</li></ul> Requirements: <ul><li>This position requires a university degree in mechanical engineering</li><li>Min 5 years relevant experience,</li><li>Advanced English,</li><li>Proficiency in Microsoft Office programs and SAP knowledge,</li><li>Strongly analytic, problem solver, deciding and communication skills,</li><li>Experience of international company,</li><li>Will be able to adapt teamwork.</li></ul>

Overview: <ul><li>We are seeking a Mechanical/Rotating Equipment Engineer to join our new Riyas NGL fractionation RNGLF Department.&nbsp;</li><li>The RNGLF Facilities will include two fractionation trains which include fractionation units, C3 &amp; C4 treatment, C3 &amp; C4 dehydration and propane refrigeration.&nbsp;</li><li>The common facilities will include feed surge and product storage, chemicals storage and utilities.&nbsp;</li><li>Your primary role will be to lead the mechanical design review, follow the construction and leading the commissioning and testing activities for the new shale gas facilities.&nbsp;</li><li>You will have a thorough understanding of plant operations, process technologies, supply and product logistics, business drivers, cost drivers, and feedstock sensitivities.&nbsp;</li><li>In addition, you will have a detailed understanding of product properties, customer applications and requirements.&nbsp;</li><li>You must also demonstrate the ability to work with multidisciplinary teams producing reports, studies and presentations that are pivotal in shaping management’s decisions.</li></ul> Responsibilities: <ul><li>Provide day-to-day technical support to Operations and Maintenance to troubleshoot and fix rotating equipment and mechanical systems.</li><li>Conduct failure analysis of rotating equipment and provide recommendations</li><li>Able to read vibrations spectrums and provide recommendations accordingly</li><li>Develop the engineering designs packages for the new installation and upgrade projects.</li><li>Review project proposals and detailed design packages for new facilities .</li><li>Participate on the testing and commissioning of the new facilities and turnaround and inspection (T&amp;I).</li><li>Update and maintain engineering documentation and drawings.</li><li>Analyze system performance and find solution for early failures and low performance of equipment</li><li>Conduct performance of major rotating equipment</li><li>Lead major rotating equipment overhauls or repair.</li><li>Ensure quality, cost effective and timely solutions to any upgrade.</li><li>Ensure full HSE compliance.</li><li>Report and analyze key performance indices.</li><li>Make recommendations for technical/economic optimization of existing facilities.</li><li>Lead feasibility/profitability studies for new facilities.</li><li>Assist in the training, development and mentoring of younger staff.</li><li>Provide analysis, evaluation and interpretation in support of projects, processes, and financing related to capital investment decisions.</li></ul> Requirements: <ul><li>Bachelors degree in mechanical engineering from an accredited university. A master’s degree is preferred.</li><li>A Professional Engineer (P.E.) or Chartered Engineer (C.Eng.) license or registration will be desirable but is not essential.</li><li>You will have at least 10 years of experience in the industrial operation facility; a shale gas facility is</li><li>preferred. You should also have a good knowledge of the modular skids mounted unit.</li><li>You must have a working knowledge of industry codes and standards, such as ASME and API, such as API-STD-610 and API-STD-617.</li><li>You will have experience with creating/modifying PFDs, and P&amp;IDs.</li><li>You will have experience with troubleshooting and major repair of oil and gas rotating equipment, such as air compressors, pumps and diesel generators.</li><li>You will have experience in creating schematics and piping diagrams.</li><li>You must be able to conduct failure analysis and provide recommendations for failed rotating equipment.</li><li>You will have experience with rotating equipment and piping field installation, commissioning and testing.</li><li>You will have experience in specifying piping and equipment layout.</li><li>You should be capable of communicating with multidiscipline engineers to complete projects. You must have proven ability to communicate effectively with management at all levels within the organization. Capable of spotting and reconciling conflicting views and interests among different parts of the organization</li><li>Strong written and oral communication skills are a requirement.&nbsp;</li></ul>

Responsibilities: <ul><li>Perform engineering studies and Identifying the reliability programs, tasks, initiatives and/or studies that are applicable to the facility</li><li>Monitor the reliability performance of the organization through reliability KPIs, and identify lower level KPIs that are applicable to the processes of the facility</li><li>Provide recommendations for bridging gaps identified both by the KPIs and by other means of assessments and provide technical support with regards to their implementation Calculate MTBFs for all equipment, Research failure data, implement and improve equipment reliability, predict equipment failures based on MTBF, vibration trend analysis, and Oil Condition Monitoring data, Introduce new technology.</li><li>Review Engineering Request/Design packages for any machinery modifications or upgrade.</li><li>Establish the level of risk for equipment failure with Maintenance Foreman and Area Maintenance Engineer as well as with the rest of OME team using a Risk Analysis program or Enterprise Asset Performance Management and Evaluate Reliability and innovation ideas pertaining to machinery equipment.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelors degree in Mechanical Engineering/Industrial Engineering or Electrical Engineering from a recognized and approved program. An advanced degree is preferred in Reliability Engineering.</li><li>You will have no less than 8 years of experience in Reliability Engineering including at least four years in Rotating Equipment or Valve Specialty.</li></ul>

Responsibilities: You will be expected to perform the following: <ul><li>The engineer shall be the focal point of contact person responsible for any critical or major equipment trouble shooting or failure analysis. He will call for meetings and collect all information necessary (process, vibration, assembly, etc.) to complete the investigation.</li><li>Be focal point of contact regarding rotating equipment with organizations outside the facility such as PMT, CSD, vendors, contractors, service shops, etc.</li><li>Review and update maintenance strategy annually to optimize equipment maintenance tasks (decide which equipment should be under PM, PdM, or Proactive).</li><li>Review machinery repair procedures and work scopes in coordination with the workshops.</li><li>Review T&amp;I scope and add any work if needed on rotating equipment during the T&amp;I.</li><li>Identify new technologies and techniques to assist the organization in shifting from a preventive mode into a proactive mode.</li><li>Review Engineering Request packages for any machinery modifications or upgrade and provide comments.</li><li>Calculate and update the monthly and YTD asset KPI’s.</li><li>Issue reliability program monthly report (MTBF, bad actors, etc.) updating the equipment health progress, and reporting failures and successes.</li><li>Follow up on the area’s EMP programs and trends.</li><li>Establish asset’s Fault analysis database ensuring all data, drawings, and information are complete and all modifications are updated</li><li>Approve SAP equipment maintenance history records for any failed rotating equipment.</li><li>Investigate trips on critical equipment to identify root causes and recommend solutions.</li><li>Oversee the PM, PdM, PaM and RCM programs.</li><li>Perform life cycle cost for bad actors and expensive repairs</li></ul> Requirements: <ul><li>As a successful candidate, you should hold a Bachelor’s degree in mechanical engineering.</li><li>A rotating equipment engineer with good experience shall be accountable for the area reliability under his custody.&nbsp;</li><li>He should be self-motivated and possess effective communication skills and has high analytical capabilities.</li><li>You must have min 5 years’ experience, preferably in the oil, gas, or similar process industry.</li><li>You must have a wide experience in rotating equipment and reliability function.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>You must have a comprehensive knowledge and practical experience in troubleshooting and investigation, failure mode analysis and familiar with reliability programs.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>You must have full knowledge of international standards and practices related to maintenance and reliability.&nbsp;&nbsp;&nbsp;&nbsp;</li><li>You should hold valid internationally recognized professional certifications such as CMRP or any reliability certificate.</li></ul>

Skills

Industry

Location

Jobtitle

317 maintenance mechanical engineer Jobs found

Maintenance Mechanical Engineer

Cost Engineer ( GM )

Maintenance Engineer III (Mechanical)

ASC Cost Engineer

Reliability Engineering (HdGP)

Piping & Valves Engineer

Senior Project Engineer

Mechanical Engineer

Reliability Engineer

Reliability/Mechanical Engineer

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

317 maintenance mechanical engineer Jobs found

Maintenance Mechanical Engineer

Cost Engineer ( GM )

Maintenance Engineer III (Mechanical)

ASC Cost Engineer

Reliability Engineering (HdGP)

Piping & Valves Engineer

Senior Project Engineer

Mechanical Engineer

Reliability Engineer

Reliability/Mechanical Engineer

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.