Mechanical Inspection Specialist

Senior Mechanical Inspector

Maintenance Engineer (Upstream)

Piping & Valves Engineer

ASC - Fire Protection Engineer

Risk Base Inspection Facilitator

Plant Corrosion Engineer

Senior Engineer EMS Process

ASC Drilling Foreman Metals - 11193

Sr. Machinist Technician (Mechanical Repairman)

Responsibilities: <ul><li>Review &amp; monitor quality control programs developed by construction contractors.</li><li>Review QAC programs, design drawings, engineering specifications, waiver requests &amp; standards.</li><li>Perform inspections of advanced, more complex nature.</li><li>Train personnel to develop technical ability and understanding in various disciplines and NDT methods.</li><li>Conduct mechanical inspection including tanks, vessel, coolers, exchanger, sumps, flare, piping, pipeline and …etc.</li><li>Conduct coating activities per S.A requirements.</li><li>Be familiar with SAIF/SAP system to run inspection activities such issue pre T&amp;I , T&amp;I package , Post T&amp;I , Defect Notifications , EIS review , external and .and etc…</li><li>Conduct RTR Installation &amp; Inspection</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Mechanical Engineering&nbsp;</li><li>Have SA Coating Inspector Level 1 or CSWIP-BGAS Gr2 or NACE CIP-1 or SSPC PCI-1 or equivalent,</li><li>Have CSWIP 3.1 or CWI/AWS inspector</li><li>&nbsp;Two of API 570 or API 653 or API 510</li><li>&nbsp;NDT LVL II (UT, PT, MT, VT, RTFI)</li><li>&nbsp;You will also have a minimum 5 years of inspection experience with BSc Mechanical Engineering degree or 10 years of experience with diploma in Mechanical&nbsp;&nbsp;</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting in a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Develop and review mechanical inspection procedures and best practices.</li><li>Write recommendations and reports related to mechanical inspection activities.</li><li>Develop and review pre and post-T&amp;Is reports.</li><li>Develop and review mechanical inspection strategies.</li><li>Participate in field mechanical inspections, quarterly schedule inspections and assessments.</li><li>Review and propose NDT method and inspection procedures.</li><li>Participate in Risk Based Inspection (RBI) studies.</li><li>Participate in HAZOP Studies review.</li><li>Set KPIs and monitor deployment and performance of mechanical inspection programs at facilities.</li><li>Review performance and KPIs of mechanical inspection programs at facilities.</li><li>Issue recommendations to enhance mechanical inspection programs deployment and performance.</li></ul> Requirements: <ul><li>You must have a Bachelor degree in Engineering.</li><li>You should have a minimum of 15 years in the refinery and/or NGLF industry, specifically in mechanical inspection, with at least 10 years field experience working on plants major turnaround, field troubleshooting and inspection.</li><li>You should have two of the following certificates: API-510, API-570 or API-653.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background.</li><li>Working environment</li></ul>

Role Description: <ul><li>We are looking for a planning engineer specialist to work with the plant T&amp;I team that is responsible for planning and preparing the requirements to address due turnaround and inspection for Abqaiq plants static equipment.</li></ul> Responsibilities: <ul><li>Issuing the turnaround and inspection plan along with operation and inspection.</li><li>Carrying out pre-meeting of all planned T&amp;I.</li><li>Freezing detailed scope of work of upcoming T&amp;I.</li><li>Following Gates process (gates 1,2 and 3) as per CMS T&amp;I manual.</li><li>Preparing and review of risk register for small T&amp;I’s and tanks.</li><li>Following up with contractor to prepare/revise JSA and HIPs.</li><li>Following up with ALPD to review HIP and JSA.</li><li>Conducting Job-ex meeting and site visit for procuring SFC and MFC.</li><li>Supporting execution team to review and certify contract invoices Opening, planning and closing the T&amp;I work orders.</li><li>Closing any procured contract after completion or extension if expired before completion.</li><li>Visiting Sites to measure/identify materials for ordering Identifying long lead materials.</li><li>Reviewing of Technology scope submission for Maintenance activities.</li><li>Creating Purchase requisitions for contracts.</li></ul> Requirements: <ul><li>Should hold a Bachelor degree in Mechanical Engineering.</li><li>Minimum of 10 years of extensive experience in Engineering, Maintenance, planning.</li><li>Good knowledge and understanding of maintenance and procurement process.</li><li>Good knowledge of contractual process (Scope Identification).</li><li>Good knowledge of scheduling turnaround and inspection.</li></ul> Working Environment: <ul><li>Our partner’s high-performing employees are drawn by the challenging and rewarding professional, technical, and industrial opportunities they offer, and are remunerated accordingly.</li><li>At our partners, their people work on truly world-scale projects, supported by investment in capital and technology that is second to none.</li><li>And because, as a global energy company, they are faced with addressing some of the world’s biggest technical, logistical, and environmental challenges, they invest heavily in talent development.</li><li>Our partner has a proud history of educating and training their workforce over many decades.</li><li>Employees at all levels are encouraged to improve their sector-specific knowledge and competencies through the workforce development program – one of the largest in the world.</li></ul>

Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Perform field troubleshooting on a daily basis or as requested.</li><li>Participate on major T&amp;Is and emergency plant shutdowns.</li><li>Provide support to maintenance organizations e.g. Machine Shop or Welding Shop by developing repair procedures and following up with on-going repairs.&nbsp;Provide proposals for repairs or avail any ideas that can come from the execution team from a technical stand point&nbsp;</li><li>Participate in facilities audit activities.</li><li>Provide engineering support to repair hydrocarbon leaks, review and approve the bolted clamp calculations and design made by the specialized leak sealing contractor companies to maintenance prior to field installation.</li><li>Review detailed drawings and material specification from Layout Group for piping modifications as requested.</li><li>Participate in HAZOP Studies review.</li><li>Perform piping mechanical calculations like minimum wall thickness for internal and external pressure, branch reinforcement calculations, MAWP calculations as per ASME B31.3, hydrotest pressure, rating and/or de-rating of piping circuits by following API 570, fitness for service to evaluate flaws or damage and determine if the piece of pipe is suitable for continuous operation by using API 579, perform pipe stress analysis using Caesar II, perform flange calculations as per ASME VIII Div 1 App 2 using PVElite, perform nozzle calculations using WRC-107 and WRC-297 modeling the analysis in Caesar II or PVElite.</li><li>Mechanical calculations and technical assessment of all the miscellaneous mechanical items like for example: Expansion Joints, steam Traps, special valves, strainers, quill injector vortex shedding calculations</li><li>Perform Hot Tap calculations by using standard SAEP-311 and API 2201.</li><li>Troubleshoot and assess valve selection, perform mechanical calculations for check valves, perform torque calculations for valve stems, etc.</li><li>Calculate and select spring hangers, provide maintenance with repair procedures.</li><li>Select gaskets type and materials, provide correct specification and applicability to critical services.</li><li>Perform mechanical assessment for firefighting equipment and systems, perform basic hydraulic calculations for deluge systems, sprinklers, fire monitors, get the concurrence from chief fire prevention engineer is required.</li><li>Perform basic structural calculations for temporary supports and any other structure minor modification as requested.</li><li>Evaluate and recommend metallurgical changes along with Corrosion and Inspection specialist</li><li>Along with the repair procedures, develop basic welding procedures for repair of mechanical components and have the concurrence from CSD welding specialist.</li><li>Develop EWRs by preparing detailed design packages including scope of work, assembly/erection procedures, welding procedures, NDT requirements, material list and sketches/drawings.</li><li>Review and approve from the technical standpoint all quotations received as requested by maintenance when deemed necessary (Example: valves, pipe and fittings of special materials, etc.</li></ul> Requirements: <ul><li>You must hold a Bachelor Degree in Mechanical Engineering.</li><li>You should have a minimum of 15 years’ experience within the refinery and/or NGLF industry specifically in asset integrity of piping and valves, with at least 10 years field experience working on plants major turnaround and field troubleshooting.</li><li>You must have a thorough knowledge of best engineering practices, solid industry codes and standards background (ASME, API, NACE, ASTM, ISO) and use of engineering software’s.</li></ul>

Responsibilities: You will be required to perform the following:&nbsp; <ul><li>Fire Fighting Foam Specialist – Develop and implement foam firefighting strategies for industrial and structural fires, with the ability to have a deep understanding of the different types of foam, their uses, and limitations.</li><li>Fire Equipment Technical Evaluator Specialist - Asses the suitability, reliability, and effectiveness of fire equipment used in firefighting by having strong knowledge of firefighting tools, equipment, and technology.</li><li>Fire Truck Design and Procurement Specialist - Oversee the design and procurement process of fire trucks. This includes reviewing design specifications, coordinating with manufacturers, overseeing the testing and inspection of fire trucks, and ensuring compliance with regulations and safety standards. The specialist also manages procurement activities, such as bidding processes, contract negotiations, and vendor management. They must have experience in vehicle design, engineering, and procurement management.</li><li>Structural and Industrial Firefighting Response Specialist - Manage firefighting operations in structural and industrial environments and have a deep understanding of fire behavior, suppression techniques, and evacuation procedures.</li><li>Emergency and Crisis Management Specialist – Coordinate responses to various types of emergencies, such as natural disasters, terrorist attacks, or other unforeseen events that affect public safety. This may include developing emergency response plans, training others on emergency procedures, and working with local and state agencies to coordinate responses in the event of a crisis. Additionally, assume the responsibility of managing communications and public relations during crises, ensuring that accurate information is shared with the public and relevant stakeholders. Other job duties may include conducting risk assessments, identifying potential hazards, and developing strategies to mitigate those risks.&nbsp;</li><li>Incident Command System (ICS) Specialist – Assume responsible for implementing and managing the ICS system during an emergency response by having experience in incident management, coordination, and communication.</li><li>Fire and Explosion Hazard Engineer – identify and asses potential fire and explosion hazards in industrial and commercial settings by having a deep understanding of chemical and physical processes that lead to fire and explosion.</li><li>Hazmat Specialist – Assume responsible for identifying, containing, and mitigating hazardous materials incidents, and having specialized training in handling dangerous chemicals, radiation, and biological agents. </li><li>This involves identifying, containing, and mitigating hazardous materials incidents that may lead to fires or explosions. This requires specialized knowledge and training in handling dangerous chemicals, radiation, and biological agents. </li><li>Hazmat technicians are often responsible for assessing potential hazards in industrial and commercial settings, as well as implementing safety measures to prevent accidents from occurring.</li></ul> Requirements: <ul><li>As the successful candidate you will hold a Bachelor’s degree in Fire Protection Engineering, Fire and Explosion Engineering, Fire Protection and Safety Engineering Technology, Fire Science, or equivalent from a recognized and approved program. Alternatively, Bachelor’s Degree in Mechanical, Electrical, Chemical, Industrial or closely related subject from a recognized and approved program. An advanced degree and is preferred.</li><li>You will have seven years’ experience in fire protection fields, including at least five years in extensive fire operations experience gained in large, busy and diverse fire services/departments, or in fire services protecting a broad range of risks the following: municipal, petrochemical, refinery, gas processing, ARFF, marine port, structural, commercial, industrial and residential occupancies and have operated at a level equivalent to Fire Chief.</li></ul> Other Requirements: <ul><li>You must have knowledge of NFPA codes and standards governing Emergency Response: i.e. firefighting foam, mobile fire apparatus, SCBA, ARFF, HazMat, PPE (NFPA 11, 1901, 1911, 1971, 1981, 1982. 473, 1072, 403, 412, 1710 etc.).</li><li>Practical experience with academic knowledge in the field of specialist Fire Hazard Management in the oil, gas and petrochemical sectors with particular emphasis on refineries and storage terminals is a requirement.</li><li>You must be experienced in technical support, engineering and fire operations, Firefighting techniques and equipment.</li><li>Having certifications related to Fire Protection (e.g. Certified Fire Protection Specialist “CFPS”, Fire and Explosion Investigator, Hazardous Materials Technician, Advanced Tactical Incident Command Level 3, Strategic Gold Level Command Level 4, CMIOSH/NEBOSH, MIFIREE) are preferred.</li></ul>

Role Description: <ul><li>We are seeking a skilled and experienced Risk-Based Inspection (RBI) Facilitator Engineer to join our Ras Tanura Refinery Engineering Department, Corrosion Management Unit.</li><li>Your primary role will be to lead and facilitate Risk-Based Inspection processes for various assets, equipment, and facilities.</li><li>You will collaborate with cross-functional teams to assess risks, develop inspection plans, and optimize maintenance strategies to ensure the integrity and reliability of assets while minimizing operational risks.</li></ul> Responsibilities: As the successful candidate you will be required to perform the following: <ul><li>Lead and facilitate Risk-Based Inspection (RBI) assessments for critical assets and equipment.</li><li>Develop and implement RBI methodologies, processes, and procedures to identify, assess, and manage risks effectively.</li><li>Collaborate with engineering, operations, and maintenance teams to prioritize inspection activities based on risk assessment results.</li><li>Utilize risk assessment tools and software to analyze data and generate reports to support decision-making processes.</li><li>Review inspection reports, findings, and recommendations to ensure compliance with regulatory requirements and industry standards.</li><li>Work closely with reliability engineers to optimize maintenance strategies and improve asset reliability.</li><li>Provide technical guidance and support to field inspection teams during on-site inspections and evaluations.</li><li>Conduct training sessions and workshops to educate personnel on RBI concepts, methodologies, and best practices.</li><li>Monitor and track key performance indicators related to asset integrity, reliability, and risk mitigation.</li><li>Stay current with industry trends, best practices, and advancements in RBI technologies to continuously improve RBI processes.</li></ul> Requirements: <ul><li>You must hold a Bachelors degree in Mechanical Engineering, Chemical Engineering, or a related field.</li><li>Advanced degree or certification in Asset Integrity Management is a plus.</li><li>You should have a minimum of 10 years’ experience.</li><li>A Proven experience in Risk-Based Inspection (RBI) facilitation, implementation, and management within the oil and gas, petrochemical, or related industries.</li><li>In-depth knowledge of RBI methodologies, risk assessment techniques, and inspection planning strategies.</li><li>Strong analytical skills with the ability to interpret complex data and make data-driven decisions.</li><li>Proficiency in using RBI software tools and platforms for risk analysis and reporting.</li><li>Familiarity with relevant industry standards and regulations governing asset integrity and inspection practices.</li><li>Willingness to travel to various project sites and facilities as needed.</li></ul>

Overview: We are seeking a Corrosion Engineer to join the Northern Area Corrosion &amp; Inspection Division (NAC&amp;ID), under Northern Area Technical Support Department (NATSD). NATSD provides engineering support for the Northern Area Oil Operations with specialized engineering and technical knowledge in the areas of various disciplines to maximize profitability and meet the highest standards of safety and environment. Responsibilities: <ul><li>Develop Corrosion Management Plans (CMP) for the operating facilities as perstandards</li><li>Develop, implement and maintain corrosion mitigation plans for the operating facilities through chemical treatment (corrosion inhibitors, scale inhibitors, biocides, oxygen scavenger etc.), coating and material selection</li><li>Conduct assessments for onshore and offshore facilities.</li><li>This includes scheduling the implementation of initial/evergreening assessments, facilitating the data collection and entry into the software etc.</li><li>Develop and implement corrosion monitoring plans for the operating facilities using corrosion coupons, corrosion probes</li><li>Carry out failure investigation and provide recommendations to prevent failures and improve integrity of the plants and pipelines Develop, maintain and optimize On-Stream Inspection (OSI) programs for the facilities</li><li>Support facility improvements by reviewing design packages for maintain potential and new projects and providing comments related to corrosion monitoring, corrosion mitigation plans including but not limited to material selection, installation of Corrosion Monitoring systems (CMS), Chemical Treatments, Corrosion Risk Management, OSI etc.</li><li>Work with inspection during plant shutdown and during turnaround and inspection (T&amp;I) for evaluation of internal and external corrosion issues and coating assessments</li></ul> Requirements: <ul><li>As the successful candidate you Will hold a Bachelor’s degree in materials, metallurgical or chemical engineering (or other relevant discipline) with a focus on corrosion.</li><li>Shall have NACE senior Corrosion Technologist certification. NACE specialist certifications would be considered advantageous</li><li>Should have a Minimum of 15 years’ experience in the oil &amp; gas industry.&nbsp;</li><li>At least 5 years’ experience in Risk-Based Inspection analysis methodology including qualitative and quantitative/semi-quantitative assessment skills of the probability of failure (PoF) and the consequence of failure (CoF).</li><li>You should have API-580 certification.</li><li>Must have a Knowledge of internal and external corrosion mechanisms common to upstream oil and gas industry and corresponding corrosion management</li><li>Must have a Knowledge of corrosion mitigation (coating, cathodic protection, chemical inhibition and material selection) &amp; corrosion monitoring techniques (coupons, probes, on-stream inspection, in-line inspection, etc.)</li><li>Are familiar with government regulations and industry codes and standards (NACE, API, ASME, etc.), specifically regarding equipment integrity</li><li>Have a working experience of reviewing the project proposal, projects design, and detail design and construction stages</li></ul>

Responsibilities: <ul><li>You will lead and guide operation value stream process/test - validation, technical support and process quality for our electronic devices in our manufacturing partners’ sites to improve industrial processes in order to maintain efficiency, productivity and improve sustainability.</li><li>Communicate and validate process changes and cycle time for PVT build onwards including Rework process with manufacturing partners.&nbsp;</li><li>Coordinate document submission - deviation (material/process), waiver, TPCN/TPCR for SCR review.</li><li>Develop, analyze and enhance manufacturing methods and fixture design to improve productivities, process yield and cost. Chair weekly process yield, output and quality meeting.</li><li>Supervise new product ramp up readiness and raise DFM issues found during PVT run.&nbsp;</li><li>Follow up with action owners on issue closure.</li><li>Drive and lead change management process – Pre-ECN and Post ECN build.</li><li>Update and coordinate quality improvement plan on weekly basis base on top Field/RMA failure rate/defects.</li><li>Support validation run for Second source requested by Procurement by reviewing results with suppliers before publish. Review supplier outgoing inspection criteria and propose manufacturing partners incoming inspection requirement.</li><li>Obtain, Update and Monitor Master equipment and tooling/fixture list for each platform.&nbsp;</li><li>Coordinate calibration and maintenance checklist for NPI equipment/fixtures.</li><li>Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements.</li><li>Ensure all corrective action plans are accompanied with preventive actions to ensure no reoccurrence.</li></ul> Requirements: <ul><li>Bachelor Degree in Electrical/Electronic Engineering / Mechanical Engineering.</li><li>5-8 year experience in test engineering, product or process engineering supporting manufacturing of electronics consumer product; with minimum 2 years of working experience in large volume manufacturing environment.</li><li>Good knowledge on manufacturing test equipment validation, GR&amp;R and cPK study; Familiar with Lean methodology, PFMEA and Process statistical tool.</li><li>Experience in Test Engineering is an added advantage.</li></ul>

Responsibilities: <ul><li>Performs all managerial functions common to the organization level such as Accountability Reports, Personnel actions, training and development of staff members.</li><li>Be familiar with repair processes and requirements for API 6A wellhead equipment.</li><li>Be familiar with certification requirements of API 6A wellhead equipment.&nbsp;</li><li>Supervises the hands-on work execution of a craft crew off-assigned craftsmen who perform large, complex jobs and emergency work, consistent with plans, schedules and standards.&nbsp;</li><li>Schedules instrument men, electricians, machinists and metal mechanics to assigned work locations. Direct contractor support groups providing labor service to unit.</li><li>Proceeds to work location to follow up on work performance and job accomplishment of assigned personnel and advise personnel regarding unusual maintenance problems.</li><li>Collaborates with Maintenance Superintendents and Engineers to develop daily work schedules, insuring full and efficient utilization of craftsmen.</li><li>Insures that work performed by the Unit complies with inspection and safety codes, safety Regulations, relevant API and Maintenance Standards.</li></ul> Requirements: <ul><li>Associates degree in mechanics/machinist.&nbsp;</li><li>12 years of minimum experience in handling facilities within Oil /Gas or in Utility Organizations, preferably field experience.&nbsp;</li><li>Has a recognized machinist /mechanic advanced competency certification.</li><li>Proficient in one of the critical crafts; mechanical, instrumentation and metals.</li></ul>

Responsibilities : <ul><li class="ql-align-justify">Troubleshoot rotating equipment through necessary diagnostic tests, measurements and analysis by disassembling / reassembly test of equipment and determine steps of repair</li><li class="ql-align-justify">Apply applicable standard on the repair and installation of all types of rotating equipment in the field. I.E. foundation work, line-up, gear box, coupling and speed control settings, then test runs for acceptance</li><li class="ql-align-justify">Perform different balancing types of equipment parts</li><li class="ql-align-justify">Troubleshoot and repair all kinds of hydraulic, electric (mechanical side), and pneumatic valve actuators</li><li class="ql-align-justify">Ability to use all types of measuring instructions such as micrometers and dial indicators and other Inspection tools</li><li>Train junior machinists as required</li></ul> Requirements : <ul><li>Recognized apprenticeship / vocational Maintenance Machinist program with a minimum of Eleven years’ hands on experience in Machinist field as stipulated above under position description. Candidate must have the following the field experience requirements.</li><li>Ability to have computer soft skills such as: Microsoft Office and Internet.</li><li>Capability to performing equipment manual and laser alignment.</li><li>Candidate must have good communication skills in English speaking, reading and writing.</li></ul>

Skills

Industry

Location

Jobtitle

197 mechanical inspection specialist Jobs found

Mechanical Inspection Specialist

Senior Mechanical Inspector

Maintenance Engineer (Upstream)

Piping & Valves Engineer

ASC - Fire Protection Engineer

Risk Base Inspection Facilitator

Plant Corrosion Engineer

Senior Engineer EMS Process

ASC Drilling Foreman Metals - 11193

Sr. Machinist Technician (Mechanical Repairman)

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

Skills

Industry

Location

Jobtitle

197 mechanical inspection specialist Jobs found

Mechanical Inspection Specialist

Senior Mechanical Inspector

Maintenance Engineer (Upstream)

Piping & Valves Engineer

ASC - Fire Protection Engineer

Risk Base Inspection Facilitator

Plant Corrosion Engineer

Senior Engineer EMS Process

ASC Drilling Foreman Metals - 11193

Sr. Machinist Technician (Mechanical Repairman)

WhiteCrow WhiteCrow is on a mission to connect companies with the best talent across the globe.

EMPLOYER

TALENT

COMPANY

Contact Us

JOBS BY SKILLS

JOBS BY FUNCTION

JOBS BY INDUSTRY

JOBS BY LOCATIONS

MODEL JOBS

JOBS BY CITY

WhiteCrow
WhiteCrow is on a mission to connect companies with the best talent across the globe.